A Novel CNFET Technology Based 3 Bit Flash ADC for Low-Voltage High Speed SoC Application

2015 ◽  
Vol 19 ◽  
pp. 19-36 ◽  
Author(s):  
P.A. Gowri Sankar ◽  
G. Sathiyabama
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Circuit Design ◽  
Field Effect ◽  
High Speed ◽  
Low Voltage ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Flash Adc ◽  
Simulation Results

The continuous scaling down of metal-oxide-semiconductor field effect transistors (MOSFETs) led to the considerable impact in the analog-digital mixed signal integrated circuit design for system-on-chips (SoCs) application. SoCs trends force ADCs to be integrated on the chip with other digital circuits. These trends present new challenges in ADC circuit design based on existing CMOS technology. In this paper, we have designed and analyzed a 3-bit high speed, low-voltage and low-power flash ADC at 32nm CNFET technology for SoC applications. The proposed ADC utilizes the Threshold Inverter Quantization (TIQ) technique that uses two cascaded carbon nanotube field effect transistor (CNFET) inverters as a comparator. The TIQ technique proposed has been developed for better implementation in SoC applications. The performance of the proposed ADC is studied using two different types of encoders such as ROM and Fat tree encoders. The proposed ADCs circuits are simulated using Synopsys HSPICE with standard 32nm CNFET model at 0.9 input supply voltage. The simulation results show that the proposed 3 bit TIQ technique based flash ADC with fat tree encoder operates up to 8 giga samples per second (GSPS) with 35.88µW power consumption. From the simulation results, we observed that the proposed TIQ flash ADC achieves high speed, small size, low power consumption, and low voltage operation compared to other low power CMOS technology based flash ADCs. The proposed method is sensitive to process, temperature and power supply voltage variations and their impact on the ADC performance is also investigated.

scholarly journals Low-Power High-Speed Double Gate 1-bit Full Adder Cell

2016 ◽  
Vol 62 (4) ◽  
pp. 329-334 ◽  
Author(s):  
Raushan Kumar ◽  
Sahadev Roy ◽  
C.T. Bhunia
Keyword(s):  
Power Consumption ◽  
High Speed ◽  
Low Voltage ◽  
Supply Voltage ◽  
Average Power ◽  
Full Adder ◽  
Cmos Technology ◽  
Spice Simulation ◽  
Pass Transistor ◽  
Voltage Swing

Abstract In this paper, we proposed an efficient full adder circuit using 16 transistors. The proposed high-speed adder circuit is able to operate at very low voltage and maintain the proper output voltage swing and also balance the power consumption and speed. Proposed design is based on CMOS mixed threshold voltage logic (MTVL) and implemented in 180nm CMOS technology. In the proposed technique the most time-consuming and power consuming XOR gates and multiplexer are designed using MTVL scheme. The maximum average power consumed by the proposed circuit is 6.94μW at 1.8V supply voltage and frequency of 500 MHz, which is less than other conventional methods. Power, delay, and area are optimized by using pass transistor logic and verified using the SPICE simulation tool at desired broad frequency range. It is also observed that the proposed design may be successfully utilized in many cases, especially whenever the lowest power consumption and delay are aimed.

scholarly journals Ultra-Low-Voltage Low-Power Bulk-Driven Quasi-Floating-Gate Operational Transconductance Amplifier

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Ziad Alsibai ◽  
Salma Bay Abo Dabbous
Keyword(s):  
Signal Processing ◽  
Power Consumption ◽  
Low Power ◽  
Low Voltage ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Bias Current ◽  
Floating Gate ◽  
Operational Transconductance Amplifier ◽  
Transconductance Amplifier

A new ultra-low-voltage (LV) low-power (LP) bulk-driven quasi-floating-gate (BD-QFG) operational transconductance amplifier (OTA) is presented in this paper. The proposed circuit is designed using 0.18 μm CMOS technology. A supply voltage of ±0.3 V and a quiescent bias current of 5 μA are used. The PSpice simulation result shows that the power consumption of the proposed BD-QFG OTA is 13.4 μW. Thus, the circuit is suitable for low-power applications. In order to confirm that the proposed BD-QFG OTA can be used in analog signal processing, a BD-QFG OTA-based diodeless precision rectifier is designed as an example application. This rectifier employs only two BD-QFG OTAs and consumes only 26.8 μW.

A 5-BIT 500-MS/S FLASH ADC USING TIME-DOMAIN COMPARISON

2012 ◽  
Vol 21 (08) ◽  
pp. 1240023 ◽  
Author(s):  
YOUNG-JAE MIN ◽  
HOON-KI KIM ◽  
CHULWOO KIM ◽  
SOO-WON KIM ◽  
GIL-SU KIM
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Time Domain ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Low Power Consumption ◽  
Nyquist Frequency ◽  
Flash Adc ◽  
Digital Implementation ◽  
The Time Domain

A 5-bit 500-MS/s time-domain flash ADC is presented. The proposed ADC consists of a reference resistor ladder, two voltage-to-time converter arrays, a time-domain comparator array and a digital encoder without sample-and-hold. In order to achieve low-power consumption with high conversion-speed and to enhance design reusability in terms of a highly digital implementation with more regular mask patterns, the time-domain comparison is devised in the flash ADC. The prototype has been implemented and fabricated in a standard 0.18 μm CMOS technology and occupies 0.132 mm2 without pads. The measured SNDR and SFDR up to the Nyquist frequency are 26.6 dB and 35.1 dB, respectively. And the peak DNL and INL are measured as 0.43 LSB and 0.58 LSB, respectively. The prototype consumes 8 mW with a 1.8-V supply voltage.

scholarly journals A 6-bit Low-Power High-Speed Flash ADC using 180 nm CMOS process

2014 ◽  
Vol 17 (1) ◽  
pp. 52-61
Author(s):  
Thanh Tri Vo ◽  
Trong Tu Bui ◽  
Duc Hung Le ◽  
Cong Kha Pham
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
High Speed ◽  
High Performance ◽  
Sampling Rate ◽  
Low Power Consumption ◽  
Cmos Process ◽  
Flash Adc ◽  
High Sampling Rate ◽  
Simulation Results

In this paper we present a design of Flash-ADC that can achieve high performance and low power consumption. By using the Double Sampling Rate technique and a new comparator topology with low kick-back noise, this design can achieve high sampling rate while still consuming low power. The design is implemented in a 0.18 m CMOS process. The simulation results show that this design can work at 400 MSps and power consumption is only 16.24 mW. The DNL and INL are 0.15 LSB and 0.6 LSB, respectively.

scholarly journals Investigation of PVT-Aware STT-MRAM Sensing Circuits for Low-VDD Scenario

Micromachines ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 551
Author(s):  
Zhongjian Bian ◽  
Xiaofeng Hong ◽  
Yanan Guo ◽  
Lirida Naviner ◽  
Wei Ge ◽  
...  
Keyword(s):  
Nonvolatile Memory ◽  
High Speed ◽  
Low Voltage ◽  
Supply Voltage ◽  
Random Access ◽  
Magnetic Tunnel Junction ◽  
Complementary Metal Oxide Semiconductor ◽  
Current Mode ◽  
Cmos Technology ◽  
Oxide Semiconductor

Spintronic based embedded magnetic random access memory (eMRAM) is becoming a foundry validated solution for the next-generation nonvolatile memory applications. The hybrid complementary metal-oxide-semiconductor (CMOS)/magnetic tunnel junction (MTJ) integration has been selected as a proper candidate for energy harvesting, area-constraint and energy-efficiency Internet of Things (IoT) systems-on-chips. Multi-VDD (low supply voltage) techniques were adopted to minimize energy dissipation in MRAM, at the cost of reduced writing/sensing speed and margin. Meanwhile, yield can be severely affected due to variations in process parameters. In this work, we conduct a thorough analysis of MRAM sensing margin and yield. We propose a current-mode sensing amplifier (CSA) named 1D high-sensing 1D margin, high 1D speed and 1D stability (HMSS-SA) with reconfigured reference path and pre-charge transistor. Process-voltage-temperature (PVT) aware analysis is performed based on an MTJ compact model and an industrial 28 nm CMOS technology, explicitly considering low-voltage (0.7 V), low tunneling magnetoresistance (TMR) (50%) and high temperature (85 °C) scenario as the worst sensing case. A case study takes a brief look at sensing circuits, which is applied to in-memory bit-wise computing. Simulation results indicate that the proposed high-sensing margin, high speed and stability sensing-sensing amplifier (HMSS-SA) achieves remarkable performance up to 2.5 GHz sensing frequency. At 0.65 V supply voltage, it can achieve 1 GHz operation frequency with only 0.3% failure rate.

A LOW-POWER AND HIGH-SPEED D FLIP-FLOP USING A SINGLE LATCH

2002 ◽  
Vol 11 (01) ◽  
pp. 51-55
Author(s):  
ROBERT C. CHANG ◽  
L.-C. HSU ◽  
M.-C. SUN
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Power Dissipation ◽  
High Speed ◽  
Operating Frequency ◽  
Flip Flop ◽  
Lower Power ◽  
Simulation Results ◽  
Hspice Simulation

A novel low-power and high-speed D flip-flop is presented in this letter. The flip-flop consists of a single low-power latch, which is controlled by a positive narrow pulse. Hence, fewer transistors are used and lower power consumption is achieved. HSPICE simulation results show that power dissipation of the proposed D flip-flop has been reduced up to 76%. The operating frequency of the flip-flop is also greatly increased.

Low-Power and Reference-Less Data and Clock Recovery Circuit for Visible Light Receivers

2018 ◽  
Author(s):  
Ming-Cheng Liu ◽  
Paul C.-P. Chao ◽  
Soh Sze Khiong
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Visible Light ◽  
Low Voltage ◽  
Supply Voltage ◽  
Clock And Data Recovery ◽  
Optical Receiver ◽  
Clock Recovery ◽  
Cmos Process ◽  
Rf Receiver

In this paper a low power all-digital clock and data recovery (ADCDR) with 1Mhz frequency has been proposed. The proposed circuit is designed for optical receiver circuit on the battery-less photovoltaic IoT (Internet of Things) tags. The conventional RF receiver has been replaced by the visible light optical receiver for battery-less IoT tags. With this proposed ADCDR a low voltage, low power consumption & tiny IoT tags can be fabricated. The proposed circuit achieve the maximum bandwidth of 1MHz, which is compatible with the commercial available LED and light sensor. The proposed circuit has been fabricated in TSMC 0.18um 1P6M standard CMOS process. Experimental results show that the power consumption of the optical receiver is approximately 5.58uW with a supply voltage of 1V and the data rate achieves 1Mbit/s. The lock time of the ADCDR is 0.893ms with 3.31ns RMS jitter period.

Low Power FGSRAM Cell Using Sleepy and LECTOR Technique

2016 ◽  
Vol 4 (2) ◽  
pp. 333 ◽  
Author(s):  
Kanan Bala Ray ◽  
Sushanta Kumar Mandal ◽  
Shivalal Patro
Keyword(s):  
Low Power ◽  
Power Supply ◽  
High Stability ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Floating Gate ◽  
Power Supply Voltage ◽  
Operation Analysis ◽  
Sram Cell ◽  
Simulation Results

<em>In this paper floating gate MOS (FGMOS) along with sleep transistor technique and leakage control transistor (LECTOR) technique has been used to design low power SRAM cell. Detailed investigation on operation, analysis and result comparison of conventional 6T, FGSRAM, FGSLEEPY, FGLECTOR and FGSLEEPY LECTOR has been done. All the simulations are done in Cadence Virtuoso environment on 45 nm standard CMOS technology with 1 V power supply voltage. Simulation results show that FGSLEEPY LECTOR SRAM cell consumes very low power and achieves high stability compared to conventional FGSRAM Cell</em>

scholarly journals A 2.5 Gbps, 10-Lane, Low-Power, LVDS Transceiver in 28 nm CMOS Technology

Electronics ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 350 ◽  
Author(s):  
Xu Bai ◽  
Jianzhong Zhao ◽  
Shi Zuo ◽  
Yumei Zhou
Keyword(s):  
Low Power ◽  
High Speed ◽  
Low Voltage ◽  
Cmos Technology ◽  
Common Mode ◽  
Serial Interface ◽  
Common Mode Voltage ◽  
Rail To Rail ◽  
The Common ◽  
28 Nm

This paper presents a 2.5 Gbps 10-lane low-power low voltage differential signaling (LVDS) transceiver for a high-speed serial interface. In the transmitter, a complementary MOS H-bridge output driver with a common mode feedback (CMFB) circuit was used to achieve a stipulated common mode voltage over process, voltage and temperature (PVT) variations. The receiver was composed of a pre-stage common mode voltage shifter and a rail-to-rail comparator. The common mode voltage shifter with an error amplifier shifted the common mode voltage of the input signal to the required range, thereby the following rail-to-rail comparator obtained the maximum transconductance to recover the signal. The chip was fabricated using SMIC 28 nm CMOS technology, and had an area of 1.46 mm2. The measured results showed that the output swing of the transmitter was around 350 mV, with a root-mean-square (RMS) jitter of 3.65 [email protected] Gbps, and the power consumption of each lane was 16.51 mW under a 1.8 V power supply.

A High-Linear CMOS Down Conversion Mixer Using Adjusting the Second and Third-Order Harmonic in Transconductance Stage

2014 ◽  
Vol 24 (01) ◽  
pp. 1550002 ◽  
Author(s):  
Mina Amiri ◽  
Adib Abrishamifar
Keyword(s):  
Low Voltage ◽  
Supply Voltage ◽  
Circuit Simulation ◽  
Cmos Technology ◽  
Conversion Gain ◽  
Third Order ◽  
Cmos Mixer ◽  
Simulation Results ◽  
Down Conversion ◽  
Pmos Transistor

In this paper a new high-linear CMOS mixer is proposed. A well-known low voltage CMOS multiplier structure is used for mixer application in this paper and its linearity is provided by adjusting the value of a resistor, sizing the aspect ratio of a PMOS transistor and adding a proper value of inductor at the input stage. In simulation, a supply voltage as low as 1 V is applied to the circuit. Simulation results of improved mixer in a 0.18-μm CMOS technology illustrate 14 dB increases in IIP3 and also an increase around 1.4 dB is obtained in conversion gain. Furthermore, additional components which are used for improving linearity would not increase the power consumption and area significantly.

Sign in / Sign up

Export Citation Format

Share Document