scholarly journals Preliminary Study of Optimum Piezoelectric Cross-Ply Composites for Energy Harvesting

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
David N. Betts ◽  
H. Alicia Kim ◽  
Christopher R. Bowen
Keyword(s):  
Energy Harvesting ◽  
Numerical Investigation ◽  
Piezoelectric Material ◽  
Electrical Energy ◽  
State Change ◽  
Power Extraction ◽  
Wide Range ◽  
Preliminary Study ◽  
Rectangular Laminate ◽  
Energy Harvesting Devices

Energy harvesting devices based on a piezoelectric material attached to asymmetric bistable laminate plates have been shown to exhibit high levels of power extraction over a wide range of frequencies. This paper optimizes for the design of bistable composites combined with piezoelectrics for energy harvesting applications. The electrical energy generated during state-change, or “snap-through,” is maximized through variation in ply thicknesses and rectangular laminate edge lengths. The design is constrained by a bistability constraint and limits on both the magnitude of deflection and the force required for the reversible actuation. Optimum solutions are obtained for differing numbers of plies and the numerical investigation results are discussed.

scholarly journals Miniaturized Salinity Gradient Energy Harvesting Devices

Molecules ◽  
2021 ◽  
Vol 26 (18) ◽  
pp. 5469
Author(s):  
Wei-Shan Hsu ◽  
Anant Preet ◽  
Tung-Yi Lin ◽  
Tzu-En Lin
Keyword(s):  
Energy Harvesting ◽  
Energy Conversion ◽  
Membrane Fouling ◽  
Salinity Gradient ◽  
Electrical Energy ◽  
Clean Energy ◽  
Internal Resistance ◽  
Power Extraction ◽  
Gradient Energy ◽  
Energy Harvesting Devices

Harvesting salinity gradient energy, also known as “osmotic energy” or “blue energy”, generated from the free energy mixing of seawater and fresh river water provides a renewable and sustainable alternative for circumventing the recent upsurge in global energy consumption. The osmotic pressure resulting from mixing water streams with different salinities can be converted into electrical energy driven by a potential difference or ionic gradients. Reversed-electrodialysis (RED) has become more prominent among the conventional membrane-based separation methodologies due to its higher energy efficiency and lesser susceptibility to membrane fouling than pressure-retarded osmosis (PRO). However, the ion-exchange membranes used for RED systems often encounter limitations while adapting to a real-world system due to their limited pore sizes and internal resistance. The worldwide demand for clean energy production has reinvigorated the interest in salinity gradient energy conversion. In addition to the large energy conversion devices, the miniaturized devices used for powering a portable or wearable micro-device have attracted much attention. This review provides insights into developing miniaturized salinity gradient energy harvesting devices and recent advances in the membranes designed for optimized osmotic power extraction. Furthermore, we present various applications utilizing the salinity gradient energy conversion.

scholarly journals Enhanced Power Extraction with Sediment Microbial Fuel Cells by Anode Alternation

Fuels ◽  
2021 ◽  
Vol 2 (2) ◽  
pp. 168-178
Author(s):  
Marzia Quaglio ◽  
Daniyal Ahmed ◽  
Giulia Massaglia ◽  
Adriano Sacco ◽  
Valentina Margaria ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Energy Harvesting ◽  
Power Density ◽  
Microbial Fuel Cells ◽  
Average Power ◽  
Power Extraction ◽  
Harvesting Technique ◽  
Harvesting Method ◽  
Energy Harvesting Devices ◽  
Efficient Power

Sediment microbial fuel cells (SMFCs) are energy harvesting devices where the anode is buried inside marine sediment, while the cathode stays in an aerobic environment on the surface of the water. To apply this SCMFC as a power source, it is crucial to have an efficient power management system, leading to development of an effective energy harvesting technique suitable for such biological devices. In this work, we demonstrate an effective method to improve power extraction with SMFCs based on anodes alternation. We have altered the setup of a traditional SMFC to include two anodes working with the same cathode. This setup is compared with a traditional setup (control) and a setup that undergoes intermittent energy harvesting, establishing the improvement of energy collection using the anodes alternation technique. Control SMFC produced an average power density of 6.3 mW/m2 and SMFC operating intermittently produced 8.1 mW/m2. On the other hand, SMFC operating using the anodes alternation technique produced an average power density of 23.5 mW/m2. These results indicate the utility of the proposed anodes alternation method over both the control and intermittent energy harvesting techniques. The Anode Alternation can also be viewed as an advancement of the intermittent energy harvesting method.

Energy Harvesting Under Harsh Conditions for the Oil & Gas Upstream Industry

2021 ◽  
Author(s):  
José Correia ◽  
Cátia Rodrigues ◽  
Ricardo Esteves ◽  
Ricardo Cesar Bezerra de Melo ◽  
José Gutiérrez ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Oil And Gas ◽  
Electrical Energy ◽  
Development Stage ◽  
Gas Extraction ◽  
Power Monitoring ◽  
Operational Conditions ◽  
Wide Range ◽  
First Time ◽  
Harsh Conditions

Abstract Environmental and safety sensing is becoming of high importance in the oil and gas upstream industry. However, present solutions to feed theses sensors are expensive and dangerous and there is so far no technology able to generate electrical energy in the operational conditions of oil and gas extraction wells. In this paper it is presented, for the first time in a relevant environment, a pioneering energy harvesting technology based on nanomaterials that takes advantage of fluid movement in oil extraction wells. A device was tested to power monitoring systems with locally harvested energy in harsh conditions environment (pressures up to 50 bar and temperatures of 50ºC). Even though this technology is in an early development stage this work opens a wide range of possible applications in deep underwater environments and in Oil and Gas extraction wells where continuous flow conditions are present.

Piezoelectric nanogenerator based on flexible PDMS-BiMgFeCeO6 composites for sound detection and biomechanical energy harvesting

2021 ◽  
Author(s):  
Sugato Hajra ◽  
Yumi Oh ◽  
Manisha Sahu ◽  
Kyungtaek Lee ◽  
Hang-Gyeom Kim ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Mechanical Stress ◽  
Piezoelectric Material ◽  
Electrical Energy ◽  
Energy Development ◽  
Ceramic Oxides ◽  
Sound Detection

The piezoelectric nanogenerator (PENG) depends upon the piezoelectric material for the conversion of mechanical stress into useful electrical energy. Development of piezoelectric material compositions starting from ceramic oxides, polymer, and...

Topology Optimization of Piezoelectric Energy Harvesting Devices Subjected to Stochastic Excitation

2010 ◽  
Author(s):  
Zheqi Lin ◽  
Hae Chang Gea ◽  
Shutian Liu
Keyword(s):  
Topology Optimization ◽  
Energy Harvesting ◽  
Electrical Energy ◽  
Ambient Vibration ◽  
Piezoelectric Energy Harvesting ◽  
The Past ◽  
Piezoelectric Energy ◽  
Random Responses ◽  
Pseudo Excitation ◽  
Energy Harvesting Devices

Converting ambient vibration energy into electrical energy using piezoelectric energy harvester has attracted much interest in the past decades. In this paper, topology optimization is applied to design the optimal layout of the piezoelectric energy harvesting devices. The objective function is defined as to maximize the energy harvesting performance over a range of ambient vibration frequencies. Pseudo excitation method (PEM) is applied to analyze structural stationary random responses. Sensitivity analysis is derived by the adjoint method. Numerical examples are presented to demonstrate the validity of the proposed approach.

Dielectric Elastomer Energy Harvesting and its Application to Human Walking

2011 ◽  
Author(s):  
Heather Lai ◽  
Chin An Tan ◽  
Yong Xu
Keyword(s):  
Energy Harvesting ◽  
Knee Joint ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
High Energy ◽  
Dielectric Elastomer ◽  
Metabolic Energy ◽  
High Energy Density ◽  
Human Walking ◽  
Wide Range

Human walking requires sophisticated coordination of muscles, tendons, and ligaments working together to provide a constantly changing combination of force, stiffness and damping. In particular, the human knee joint acts as a variable damper, dissipating greater amounts of energy when the knee undergoes large rotational displacements during walking, running or hopping. Typically, this damping results from the dissipation, or loss, of metabolic energy. It has been proven to be possible however; to collect this otherwise wasted energy through the use of electromechanical transducers of several different types which convert mechanical energy to electrical energy. When properly controlled, this type of device not only provides desirable structural damping effects, but the energy generated can be stored for use in a wide range of applications. A novel approach to an energy harvesting knee joint damper is presented using a dielectric elastomer (DE) smart material based electromechanical transducer. Dielectric elastomers are extremely elastic materials with high electrical permittivity which operate based on electrostatic effects. By placing compliant electrodes on either side of a dielectric elastomer film, a specialized capacitor is created, which couples mechanical and electrical energy using induced electrostatic stresses. Dielectric elastomer energy harvesting devices not only have a high energy density, but the material properties are similar to that of human tissue, making it highly suitable for wearable applications. A theoretical framework for dielectric elastomer energy harvesting is presented along with a mapping of the active phases of the energy harvesting to the appropriate phases of the walking stride. Experimental results demonstrating the energy harvesting capability of a DE generator undergoing strains similar to those experienced during walking are provided for the purpose of verifying the theoretical results. The work presented here can be applied to devices for use in rehabilitation of patients with muscular dysfunction and transfemoral prosthesis as well as energy generation for able-bodied wearers.

scholarly journals Power Consideration in a Piezoelectric Generator

2013 ◽  
Vol 2013 ◽  
pp. 1-7
Author(s):  
Rémi Tardiveau ◽  
Frédéric Giraud ◽  
Adrian Amanci ◽  
Francis Dawson ◽  
Christophe Giraud-Audine ◽  
...  
Keyword(s):  
Phase Shift ◽  
Energy Harvesting ◽  
Resonant Frequency ◽  
Piezoelectric Material ◽  
Power Flow ◽  
Mechanical Energy ◽  
Power Losses ◽  
Vibration Excitation ◽  
Piezoelectric Generator ◽  
Energy Harvesting Devices

A piezoelectric generator converts mechanical energy into electricity and is used in energy harvesting devices. In this paper, synchronisation conditions in regard to the excitation vibration are studied. We show that a phase shift of ninety degrees between the vibration excitation and the bender’s displacement provides the maximum power from the mechanical excitation. However, the piezoelectric material is prone to power losses; hence the bender’s displacement amplitude is optimised in order to increase the amount of power which is converted into electricity. In the paper, we use active energy harvesting to control the power flow, and all the results are achieved at a frequency of 200 Hz which is well below the generator’s resonant frequency.

Scavenging Energy From Piezoelectric Materials for Wireless Sensor Applications

2005 ◽  
Author(s):  
Christopher Green ◽  
Karla M. Mossi ◽  
Robert G. Bryant
Keyword(s):  
Energy Harvesting ◽  
Wireless Sensors ◽  
Piezoelectric Materials ◽  
Cost Effective ◽  
Electrical Energy ◽  
Wireless Sensor ◽  
Battery Life ◽  
Sinusoidal Vibration ◽  
Sensor Applications ◽  
Energy Harvesting Devices

Wireless sensors are an emerging technology that has the potential to revolutionize the monitoring of simple and complex physical systems. Prior research has shown that one of the biggest issues with wireless sensors is power management. A wireless sensor is simply not cost effective unless it can maintain long battery life or harvest energy from another source. Piezoelectric materials are viable conversion mechanisms because of their inherent ability to covert vibrations to electrical energy. Currently a wide variety of piezoelectric materials are available and the appropriate choice for sensing, actuating, or harvesting energy depends on their characteristics and properties. This study focuses on evaluating and comparing three different types of piezoelectric materials as energy harvesting devices. The materials utilized consisted on PZT 5A, a single crystal PMN 32%PT, and a PZT 5A composite called Thunder. These materials were subjected to a steady sinusoidal vibration provided by a shaker at different power levels. Gain of the devices was measured at all levels as well as impedance in a range of frequencies was characterized. Results showed that the piezoelectric generator coefficient, g33, predicts the overall power output of the materials as verified by the experiments. These results constitute a baseline for an energy harvesting system that will become the front end of a wireless sensor network.

Multiple Resonances Piezoelectric Energy Harvesting Generator

2009 ◽  
Author(s):  
Shaofan Qi ◽  
Roger Shuttleworth ◽  
S. Olutunde Oyadiji
Keyword(s):  
Energy Harvesting ◽  
Energy Harvester ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Limited Bandwidth ◽  
Piezo Element ◽  
Piezoelectric Energy ◽  
Wide Range ◽  
Environmental Vibration ◽  
Design And Testing

Energy harvesting is the process of converting low level ambient energy into usable electrical energy, so that remote electronic instruments can be powered without the need for batteries or other supplies. Piezoelectric material has the ability to convert mechanical energy into electrical energy, and cantilever type harvesters using this material are being intensely investigated. The typical single cantilever energy harvester design has a limited bandwidth, and is restricted in ability for converting environmental vibration occurring over a wide range of frequencies. A multiple cantilever piezoelectric generator that works over a range of frequencies, yet has only one Piezo element, is being investigated. The design and testing of this novel harvester is described.

scholarly journals Numerical Analysis of an Active Thermomagnetic Device for Thermal Energy Harvesting

2020 ◽  
Vol 142 (8) ◽  
Author(s):  
Makita R. Phillips ◽  
Gregory P. Carman
Keyword(s):  
Energy Harvesting ◽  
Thermal Energy ◽  
Applied Field ◽  
Waste Heat ◽  
Thermal Conductance ◽  
Electrical Energy ◽  
Low Grade ◽  
Thermal Energy Harvesting ◽  
Magnetic States ◽  
Energy Harvesting Devices

Abstract The abundance of low-grade waste heat necessitates energy harvesting devices to convert thermal energy to electrical energy. Through magnetic transduction, thermomagnetics can perform this conversion at reasonable efficiencies. Thermomagnetic materials use thermal energy to switch between magnetic and non-magnetic states and convert thermal energy into electrical energy. In this study, we numerically analyzed an active thermomagnetic device for thermal energy harvesting composed of gadolinium (Gd) and neodymium iron boron (NdFeB). A parametric study to determine the device efficiency was conducted by varying the gap distance, heat source temperature, and Gd thickness. Furthermore, the effect of the thermal conductance and applied field was also evaluated. It was found that the relative efficiency for smaller gap distances ranges from ∼15% to 28%; the largest allowable volume of Gd should be used and higher applied field leads to higher efficiencies.

Sign in / Sign up

Export Citation Format

Share Document