scholarly journals Hydroforming Process for an Ultrasmall Bending Radius Elbow

2018 ◽  
Vol 2018 ◽  
pp. 1-15
Author(s):  
Shangwen Ruan ◽  
Lihui Lang ◽  
Yulong Ge
Keyword(s):  
Heat Treatment ◽  
High Performance ◽  
Thickness Distribution ◽  
Tube Hydroforming ◽  
Welding Process ◽  
Forming Process ◽  
Sealing Performance ◽  
Lap Welding ◽  
Hydroforming Process ◽  
Bending Radius

Bent pipes are widely used in automotive, aviation, and aerospace industries for delivering fluids. Parts having small relative bending radiuses are called elbows. However, fabricating a thin-walled elbow part using the simple bending process poses many challenges. One possible way to manufacture elbows is with the stamping-welding process. The major drawbacks of this method include the decline in sealing performance and the addition in weight attributed to the lap welding process. Tube hydroforming (THF) is considered as a feasible solution to these problems. However, the forming process could be quite complex, and multistep forming is necessary. This study investigates the effects of preliminary processes on elbow forming such as bending, partition forming, and heat treatment and presents a high-performance optimized process design to achieve an ultrasmall radius elbow. The effects of multistep forming on the thickness distribution and the heat treatment on the microstructure have been evaluated. The results obtained from simulations show a reasonable agreement with those from the experiments.

scholarly journals Study on strong spinning preparation method and mechanism of the industrial pure titanium ultrafine crystallization

2019 ◽  
Vol 14 ◽  
pp. 155892501989525
Author(s):  
Yu Yang ◽  
Yanyan Jia
Keyword(s):  
Heat Treatment ◽  
High Performance ◽  
Pure Titanium ◽  
Grain Structure ◽  
Theoretical Research ◽  
Ultrafine Grain ◽  
Forming Process ◽  
Spinning Process ◽  
And Performance ◽  
Material Utilization

Ultrafine crystallization of industrial pure titanium allowed for higher tensile strength, corrosion resistance, and thermal stability and is therefore widely used in medical instrumentation, aerospace, and passenger vehicle manufacturing. However, the ultrafine crystallizing batch preparation of tubular industrial pure titanium is limited by the development of the spinning process and has remained at the theoretical research stage. In this article, the tubular TA2 industrial pure titanium was taken as the research object, and the ultrafine crystal forming process based on “5-pass strong spin-heat treatment-3 pass-spreading-heat treatment” was proposed. Based on the spinning process test, the ultimate thinning rate of the method is explored and the evolution of the surface microstructure was analyzed by metallographic microscope. The research suggests that the multi-pass, medium–small, and thinning amount of spinning causes the grain structure to be elongated in the axial and tangential directions, and then refined, and the axial fiber uniformity is improved. The research results have certain scientific significance for reducing the consumption of high-performance metals improving material utilization and performance, which also promote the development of ultrafine-grain metals’ preparation technology.

scholarly journals Formability study and metallurgical properties analysis of FSWed AA 6061 blank by the SPIF process

2021 ◽  
Vol 3 (3) ◽  
Author(s):  
Payam Tayebi ◽  
Ali Fazli ◽  
Parviz Asadi ◽  
Mahdi Soltanpour
Keyword(s):  
Base Metal ◽  
Strain Distribution ◽  
Thickness Distribution ◽  
Experimental Studies ◽  
Welding Process ◽  
Forming Limit ◽  
Forming Process ◽  
Friction Stir ◽  
Numerical Process ◽  
Tailor Welded Blank

AbstractIn this study, in order to obtain the maximum possible formability in tailor-welded blank AA6061 sheets connected by the friction stir welding (FSW) procedure, the incremental sheet forming process has been utilized. The results are presented both numerically and experimentally. To obtain the forming limit angle, the base and FSWed sheets were formed in different angles with conical geometry, and ultimately, the forming limit angle for the base metal and FSWed sheet is estimated to be 60° and 57.5°, respectively. To explore the effects of welding and forming procedures on AA6061 sheets, experimental studies such as mechanical properties, microstructure and fracture analysis are carried out on the samples. Also, the thickness distribution of the samples is studied to investigate the effect of the welding process on the thickness distribution. Then, the numerical process was simulated by the ABAQUS commercial software to study the causes of the FSWed samples failure through analyzing the thickness distribution parameter, and major and minor strains and the strain distribution. Causes of failure in FSWed samples include increased minor strain, strain distribution and thickness distribution in welded areas, especially in the proximity of the base metal area.

Optimization of Tube Hydroforming Process Using Probabilistic Constraints on Failure Modes

2011 ◽  
Vol 62 ◽  
pp. 21-35 ◽  
Author(s):  
Anis Ben Abdessalem ◽  
A. El Hami
Keyword(s):  
Failure Modes ◽  
High Reliability ◽  
Thickness Distribution ◽  
Tube Hydroforming ◽  
Forming Limit Diagram ◽  
Plastic Instability ◽  
Probabilistic Constraints ◽  
Forming Limit ◽  
Reliability Based Design ◽  
Hydroforming Process

In metal forming processes, different parameters (Material constants, geometric dimensions, loads …) exhibits unavoidable scatter that lead the process unreliable and unstable. In this paper, we interest particularly in tube hydroforming process (THP). This process consists to apply an inner pressure combined to an axial displacement to manufacture the part. During the manufacturing phase, inappropriate choice of the loading paths can lead to failure. Deterministic approaches are unable to optimize the process with taking into account to the uncertainty. In this work, we introduce the Reliability-Based Design Optimization (RBDO) to optimize the process under probabilistic considerations to ensure a high reliability level and stability during the manufacturing phase and avoid the occurrence of such plastic instability. Taking account of the uncertainty offer to the process a high stability associated with a low probability of failure. The definition of the objective function and the probabilistic constraints takes advantages from the Forming Limit Diagram (FLD) and the Forming Limit Stress Diagram (FLSD) used as a failure criterion to detect the occurrence of wrinkling, severe thinning, and necking. A THP is then introduced as an example to illustrate the proposed approach. The results show the robustness and efficiency of RBDO to improve thickness distribution and minimize the risk of potential failure modes.

Numerical analysis in a beverage can utilizing tube hydroforming process

2019 ◽  
Vol 28 (6) ◽  
pp. 77-83
Author(s):  
Jorge Carlos León Anaya ◽  
José Antonio Juanico Loran ◽  
Juan Carlos Cisneros Ortega
Keyword(s):  
Mechanical Properties ◽  
Numerical Analysis ◽  
Metal Forming ◽  
Tube Hydroforming ◽  
Forming Process ◽  
Aluminum Tube ◽  
Plastic Deformation Process ◽  
Metal Forming Process ◽  
Hydroforming Process

Numerical analysis for Tube Hydroforming (THF) was developed in this work to predict the behavior of extruded aluminum tube in a forming die for beverage can applications. THF is a metal forming process dependent of three parameters: friction between the tube and the die, internal pressure, and material properties of the tube. Strain hardening is a governing phenomenon that occurs in the plastic deformation process of metals. Hollomon’s equation offers a mathematical description of the metal behavior in the plastic zone. For a proper simulation, experimental determination of the mechanical properties of aluminum 6061-T5 were conducted and test specimens where obtained directly from the aluminum tube. Experimental data were necessary because no sufficient data of the mechanical properties of the tube were available in the literature. Numerical simulations of THF were performed, and the results were compared with analytical results for validation purposes with less than 10% of error.

Numerical and Experimental Study of the Effect Pressure Path in Tube Hydroforming Process

2011 ◽  
Vol 473 ◽  
pp. 579-586
Author(s):  
Majid Elyasi ◽  
Hassan Khanlari ◽  
Mohammad Bakhshi-Jooybari
Keyword(s):  
Experimental Study ◽  
Finite Element ◽  
Stainless Steel ◽  
Experimental Approach ◽  
Thickness Distribution ◽  
Tube Hydroforming ◽  
Initial Pressure ◽  
Low Carbon ◽  
Element Simulation ◽  
Hydroforming Process

In this paper, the effect of pressure path on thickness distribution and product geometry in the tube hydroforming process is studied by finite element simulation and experimental approach. In simulations and experiments, low carbon stainless steel (SS316L) seamless tubes were used. The obtained results indicated that with increasing of the initial pressure, the bulge value of the part increases and the wrinkling value decreases. In addition, if the initial pressure is highly decreased, then bursting may occur.

Reliability Analysis of the Tube Hydroforming Process Based on Forming Limit Diagram

2005 ◽  
Vol 128 (3) ◽  
pp. 402-407 ◽  
Author(s):  
Bing Li ◽  
Don R. Metzger ◽  
Tim J. Nye
Keyword(s):  
Automotive Industry ◽  
Metal Forming ◽  
Tube Hydroforming ◽  
Forming Limit Diagram ◽  
Probability Of Failure ◽  
Alternative Methods ◽  
Forming Limit ◽  
Forming Process ◽  
Hydroforming Process ◽  
Free Bulging

Tube hydroforming is an attractive manufacturing process in the automotive industry because it has several advantages over alternative methods. In order to determine the reliability of the process, a new method to assess the probability of failure is proposed in this paper. The method is based on the reliability theory and the forming limit diagram, which has been extensively used in metal forming as the criteria of formability. From the forming limit band in the forming limit diagram, the reliability of the forming process can be evaluated. A tube hydroforming process of free bulging is then introduced as an example to illustrate the approach. The results show this technique to be an innovative approach to avoid failure during tube hydroforming.

FE Simulation and Experimental Study of Tube Hydroforming Process for AA1050 Alloy at Various Temperatures

2011 ◽  
Vol 264-265 ◽  
pp. 96-101
Author(s):  
Hassan Moslemi Naeini ◽  
Golam Hosein Liaghat ◽  
S.J. Hashemi Ghiri ◽  
S.M.H. Seyedkashi
Keyword(s):  
Elevated Temperatures ◽  
New Technologies ◽  
Thickness Distribution ◽  
Tube Hydroforming ◽  
Thermal Conditions ◽  
High Strength ◽  
Different Temperatures ◽  
Hydroforming Process ◽  
Production Technologies ◽  
Advanced Production

Considering the necessity of using light weight, high strength and corrosion resistant materials, automotive and aerospace industries need to use advanced production technologies. Hydroforming has been regarded as one of the new technologies in forming of aluminium and magnesium alloys. These alloys have very low formability at room temperature which will be improved at elevated temperatures. In this paper, AA1050 aluminium alloy tube is numerically and experimentally investigated at different temperatures. Thickness distribution in forming zone is studied under different thermal conditions. Numerical results have been verified by experiments and there is a good agreement.

Two Dimensional Plane Strain Modeling of Tube Hydroforming

2000 ◽  
Author(s):  
G. T. Kridli ◽  
L. Bao ◽  
P. K. Mallick
Keyword(s):  
Finite Element ◽  
Plane Strain ◽  
Material Properties ◽  
Thickness Distribution ◽  
Tube Hydroforming ◽  
Strain Hardening Exponent ◽  
Hydraulic Pressure ◽  
Two Dimensional ◽  
Dimensional Plane ◽  
Hydroforming Process

Abstract The tube hydroforming process has been used in industry for several years to produce components such as exhaust manifolds. Recent advances in forming machines and machine control systems have allowed for the introduction and the implementation of the process to produce several automotive components, which were originally produced by the stamping process. Components such as side rails, engine cradles, space frames, and several others can be economically produced by tube hydroforming. The process involves forming a straight or a pre-bent tube into a die cavity using internal hydraulic pressure, which may be coupled with controlled axial feeding of the tube. One of the remaining challenges facing product and process engineers in designing hydroformed parts is the lack of an extensive knowledge base of the process. This includes a full understanding of the process mechanics and the effects of the material properties on the quality of the hydroformed product. This paper reports on the results of two dimensional plane strain finite element models of the tube hydroforming process, which were conducted using the commercial finite element code ABAQUS/Standard. The objective of the study is to examine the effects of material properties, die geometry, and frictional characteristics on the selection of the hydroforming process parameters. The paper discusses the effects of the strain-hardening exponent, friction coefficient at the die-workpiece interface, initial tube wall thickness, and die corner radii on the thickness distribution of the hydroformed tube.

Investigation of Load Path Effect on Thickness Distribution and Product Geometry in the Bulge Hydroforming Process

2011 ◽  
Vol 110-116 ◽  
pp. 1477-1482 ◽  
Author(s):  
Majid Elyasi ◽  
Hassan Khanlari ◽  
Mohammad Bakhshi-Jooybari
Keyword(s):  
Finite Element ◽  
Stainless Steel ◽  
Finite Element Simulation ◽  
Experimental Approach ◽  
Thickness Distribution ◽  
Tube Hydroforming ◽  
Low Carbon ◽  
Load Path ◽  
Element Simulation ◽  
Hydroforming Process

In this paper, the effect of load path on thickness distribution and product geometry in the tube hydroforming process is studied by finite element simulation and experimental approach. The pressure path was obtained by using finite element simulation and its validation with experiments. In simulations and experiments, low carbon stainless steel (SS316L) seamless tubes were used. The obtained results indicated that if pressure reaches to maximum faster, bulge value and thinning of the part will be more and wrinkling value will be less.

Sign in / Sign up

Export Citation Format

Share Document