scholarly journals Discrete Simulation of Vibratory Roller Compaction of Field Rockfills

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Yang Li ◽  
Chengxue She
Keyword(s):  
Mechanical Properties ◽  
Dynamic Response ◽  
Numerical Simulations ◽  
Numerical Method ◽  
Field Experiments ◽  
Simulation Method ◽  
Roller Compaction ◽  
Discrete Simulation ◽  
New Model ◽  
The Future

Vibratory roller compaction is a well-known method in improving the mechanical properties of field rockfills. However, the meso mechanism of rockfill densification under vibratory roller compaction has not been understood clearly. This paper presents a discrete numerical method to simulate the vibratory roller compaction of field rockfills. Firstly, rockfill particles were modeled by irregular and stochastic clusters, which can be breakable. In addition, the segregation of field rockfills was replicated in a practical manner. Then, a new model of the vibratory roller was presented, in which the frame inertia was considered. Finally, the developed method was applied to simulate the vibratory roller compaction of field rockfills in the Shui Buya Project. Results show that (1) the numerical simulations of vibratory roller compaction of field rockfills agree well with the field experiments; thus, the feasibility and rationality of the developed simulation method are verified; (2) the dynamic response of field rockfills under vibratory roller compaction can be predicted by the presented numerical method with calibrated model and parameters; (3) the new roller model with frame inertia considered is much more accurate than the roller models in early studies. Thus, the developed discrete numerical method can be further adopted to explore the meso mechanism of rockfill densification under vibratory roller compaction in the future.

scholarly journals Beam Theory of Thermal–Electro-Mechanical Coupling for Single-Wall Carbon Nanotubes

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 923
Author(s):  
Kun Huang ◽  
Ji Yao
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Beam Theory ◽  
Bending Stiffness ◽  
Single Wall Carbon Nanotubes ◽  
Beam Model ◽  
Euler Beam ◽  
New Model ◽  
Mechanical Coupling ◽  
Electrostatic Fields

The potential application field of single-walled carbon nanotubes (SWCNTs) is immense, due to their remarkable mechanical and electrical properties. However, their mechanical properties under combined physical fields have not attracted researchers’ attention. For the first time, the present paper proposes beam theory to model SWCNTs’ mechanical properties under combined temperature and electrostatic fields. Unlike the classical Bernoulli–Euler beam model, this new model has independent extensional stiffness and bending stiffness. Static bending, buckling, and nonlinear vibrations are investigated through the classical beam model and the new model. The results show that the classical beam model significantly underestimates the influence of temperature and electrostatic fields on the mechanical properties of SWCNTs because the model overestimates the bending stiffness. The results also suggest that it may be necessary to re-examine the accuracy of the classical beam model of SWCNTs.

scholarly journals Experimental and Numerical Evaluation of Mechanical Properties of 3D-Printed Stainless Steel 316L Lattice Structures

2021 ◽  
Author(s):  
M. Carraturo ◽  
G. Alaimo ◽  
S. Marconi ◽  
E. Negrello ◽  
E. Sgambitterra ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Mechanical Behavior ◽  
Numerical Simulations ◽  
Uniaxial Tensile ◽  
Uniaxial Tensile Test ◽  
Lattice Structures ◽  
Stainless Steel 316L ◽  
Research Attention ◽  
Octet Truss

AbstractAdditive manufacturing (AM), and in particular selective laser melting (SLM) technology, allows to produce structural components made of lattice structures. These kinds of structures have received a lot of research attention over recent years due to their capacity to generate easy-to-manufacture and lightweight components with enhanced mechanical properties. Despite a large amount of work available in the literature, the prediction of the mechanical behavior of lattice structures is still an open issue for researchers. Numerical simulations can help to better understand the mechanical behavior of such a kind of structure without undergoing long and expensive experimental campaigns. In this work, we compare numerical and experimental results of a uniaxial tensile test for stainless steel 316L octet-truss lattice specimen. Numerical simulations are based on both the nominal as-designed geometry and the as-build geometry obtained through the analysis of µ-CT images. We find that the use of the as-build geometry is fundamental for an accurate prediction of the mechanical behavior of lattice structures.

Experiments and numerical simulations for the mechanical properties of Ni-based superalloys fabricated by laser melting deposition

2021 ◽  
Vol 140 ◽  
pp. 107058
Author(s):  
Jiaqi Zhang ◽  
Zhaozhen Huang ◽  
Yan Fang ◽  
Zhenjie Gu ◽  
Jichang Xie ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Numerical Simulations ◽  
Laser Melting ◽  
Laser Melting Deposition

Dynamic Response Analysis of Butt Joint of HTS-A Steel Considering Welding Residual Stresses

2013 ◽  
Vol 423-426 ◽  
pp. 944-950
Author(s):  
Wei Shen ◽  
Ren Jun Yan ◽  
Lin Xu ◽  
Kai Qin ◽  
Xin Yu Zhang ◽  
...  
Keyword(s):  
Residual Stress ◽  
Dynamic Response ◽  
Hot Spot ◽  
Time History ◽  
High Strength ◽  
Simulation Method ◽  
Butt Joint ◽  
Welding Residual Stress ◽  
Response Analysis ◽  
Hull Structure

This paper uses both numerical simulation method and experimental research method to study on welding residual stress of high-strength steel of the cone-cylinder hull. Welding is often accompanied by a larger welding residual stress, which directly affects the safety and service life of the hull structure. In order to obtain the distribution of the welding residual stress, the welding procedure was developed by its parameter language by using FE analysis software in this paper. Then the welding residual stress of hot spot region was measured through X-ray nondestructive testing method, and compared it with simulation results. Finally, considering the residual stress as the initial stress, this paper analyzed dynamic response process of the welding structure under combined actions of the welding residual stress and multiaxial loads, which could more accurately determine the stress of welding structure and the location of fatigue risk point. According to the amplitude of damage parameters and strain time-history curve, we can estimate the fatigue life of structure by selecting the corresponding damage models.

scholarly journals Dynamic Response of Thermally Bonded Bicomponent Fibre Nonwovens

2011 ◽  
Vol 70 ◽  
pp. 405-409 ◽  
Author(s):  
Emrah Demirci ◽  
Memiş Acar ◽  
Behnam Pourdeyhimi ◽  
Vadim V. Silberschmidt
Keyword(s):  
Mechanical Properties ◽  
Dynamic Response ◽  
Fibre Diameter ◽  
Orientation Distribution ◽  
Nonwoven Fabric ◽  
Woven Fabrics ◽  
Core Material ◽  
Finite Element Software ◽  
Anisotropic Mechanical Properties ◽  
Fibre Matrix

Having a unique microstructure, nonwoven fabrics possess distinct mechanical properties, dissimilar to those of woven fabrics and composites. This paper aims to introduce a methodology for simulating a dynamic response of core/sheath-type thermally bonded bicomponent fibre nonwovens. The simulated nonwoven fabric is treated as an assembly of two regions with distinct mechanical properties. One region - the fibre matrix – is composed of non-uniformly oriented core/sheath fibres acting as link between bond points. Non-uniform orientation of individual fibres is introduced into the model in terms of the orientation distribution function in order to calculate the structure’s anisotropy. Another region – bond points – is treated in simulations as a deformable bicomponent composite material, composed of the sheath material as its matrix and the core material as reinforcing fibres with random orientations. Time-dependent anisotropic mechanical properties of these regions are assessed based on fibre characteristics and manufacturing parameters such as the planar density, core/sheath ratio, fibre diameter etc. Having distinct anisotropic mechanical properties for two regions, dynamic response of the fabric is modelled in the finite element software with shell elements with thicknesses identical to those of the bond points and fibre matrix.

ON THE APPLICATION OF A NOVEL ALGORITHM TO HYDRODYNAMIC DIFFUSION AND VELOCITY FLUCTUATIONS IN SEDIMENTING SYSTEMS

1996 ◽  
Vol 07 (04) ◽  
pp. 543-561 ◽  
Author(s):  
WOLFGANG KALTHOFF ◽  
STEFAN SCHWARZER ◽  
GERALD RISTOW ◽  
HANS J. HERRMANN
Keyword(s):  
Numerical Simulations ◽  
Numerical Method ◽  
Incompressible Fluids ◽  
Strong Anisotropy ◽  
Velocity Fluctuations ◽  
Drag Forces ◽  
Large Numbers ◽  
Spatial Dimensions ◽  
Experimental Findings ◽  
Novel Algorithm

We present a numerical method to deal efficiently with large numbers of particles in incompressible fluids. The interactions between particles and fluid are taken into account by a physically motivated ansatz based on locally defined drag forces. We demonstrate the validity of our approach by performing numerical simulations of sedimenting non-Brownian spheres in two spatial dimensions and compare our results with experiments. Our method reproduces qualitatively important aspects of the experimental findings, in particular the strong anisotropy of the hydrodynamic bulk self-diffusivities.

scholarly journals Ethephon Improved Stalk Strength of Maize (Zea Mays L.) Mainly through Altering Internode Morphological Traits to Modulate Mechanical Properties under Field Conditions

Agronomy ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 186 ◽  
Author(s):  
Yushi Zhang ◽  
Yubin Wang ◽  
Delian Ye ◽  
Wei Wang ◽  
Xinming Qiu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Strength ◽  
Structural Equation ◽  
Dry Matter ◽  
Field Experiments ◽  
Unit Length ◽  
Bending Moment ◽  
Equation Model ◽  
Morphological Properties ◽  
Stalk Strength

Stalk strength is critical for reducing maize stalk lodging and maintaining grain yield. Ethephon has been widely applied to molding compact plant-type to reduce the lodging risk in maize production. However, there is little information on how ethephon regulates internode mechanical properties to improve maize stalk strength. Multiyear field experiments (2013–2017) were conducted to determine the effects of foliar-applied ethephon on summer maize internode morphological, chemical and mechanical characteristics. The hypothetical structural equation model was used to analyze the contribution of ethephon-induced changes of internode morphological and chemical traits to stalk mechanical strength. Ethephon significantly reduced the basal internode length, while increasing internode diameters and breaking resistance. Meanwhile, ethephon significantly increased the ratio of structural dry matter to total dry matter and the amount of structural dry matter per unit length and volume. Mechanical assays suggested that ethephon significantly altered geometric properties and increased the maximum bending moment, maximum failure force, while depressing the material properties. Furthermore, correlation and path analyses revealed strong correlations and significant contribution of internode morphological properties to stalk mechanical strength, respectively. These results support the conclusion that ethephon-induced morphology alteration played a major role in improving maize internode strength.

Sign in / Sign up

Export Citation Format

Share Document