Fabrication and In-Situ Thermal Reduction of Gold Nanofibers

2020 ◽  
Vol 12 (8) ◽  
pp. 1109-1115
Author(s):  
Xiaojiao Yang ◽  
Jun Li ◽  
Ying Liu
Keyword(s):  
Thermal Analysis ◽  
Gold Nanoparticles ◽  
Fourier Transform ◽  
Average Diameter ◽  
Thermal Reduction ◽  
Gold Content ◽  
Gold Salt ◽  
One Dimensional ◽  
Nanoelectronic Devices

One-dimensional gold nanofibers are good candidates for next generation nanoelectronic devices. Here, gold nanofibers were synthesized via electrospinning with subsequent in-situ thermal reduction. The thermal behavior of the precursor nanofibers was investigated by thermogravimetric/differential thermal analysis and fourier transform infrared. The polymer parts are decomposed and removed step by step, meanwhile, gold salt is decomposed and in-situ reduced to form gold nanoparticles in air without any reducing agent or gas due to its strong oxidation ability. The effects of gold content, polymers type (PVP, PVA, PAN), calcination atmospheres (Air, H2, H2/Ar) and temperatures (200 °C to 500 °C) on the morphology and structures of gold nanofibers were characterized by XRD, SEM, and TEM. The results shows that PVP is the optimal polymer with the gold content of 6:1 (PVP:Au) to fabricate the continuous gold nanofibers with good morphology and structures. The final gold nanofibers with average diameter of 60 nm and several hundred micrometers long, were fabricated after calcined at 500 °C in air for 2 hours. It was composed of gold nanoparticles that ranged from 5 to 30 nm.

In Situ Formation of One-Dimensional Assemblies of Gold Nanoparticles in Confined Media

ChemPhysChem ◽  
2012 ◽  
Vol 13 (5) ◽  
pp. 1347-1353 ◽  
Author(s):  
Jorge Carballido-Landeira ◽  
Sonia Goy-López ◽  
Alberto P. Muñuzuri ◽  
Pablo Taboada ◽  
Víctor Mosquera
Keyword(s):  
Gold Nanoparticles ◽  
One Dimensional ◽  
In Situ Formation ◽  
Confined Media

PENINGKATAN LAJU DISOLUSI ACYCLOVIR DENGAN METODE SISTEM DISPERSI PADAT MENGGUNAKAN POLOXAMER 188

2016 ◽  
Vol 5 (1) ◽  
pp. 6
Author(s):  
Budi Setiawan ◽  
Erizal Zaini ◽  
Salman Umar
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Differential Thermal Analysis ◽  
Fourier Transform Infrared ◽  
X Ray Diffraction ◽  
Poloxamer 188 ◽  
X Ray ◽  
Scanning Electron

Sebuah penelitian tentang sistem dispersi padat dari asiklovir dengan poloxamer 188 telah dilakukan formulasi dengan pencampuran secara fisika dengan rasio 1 : 1, 1 : 3, 1 : 5 dan dispersi padat 1 : 1, 1 : 3, 1 : 5 dan penggilingan 1:1 sebagai pembanding. Dispersi padat dibuat menggunakan metode pencairan (fusi), yang digabung dengan poloxamer 188 pada hotplate kemudian asiklovir dimasukkan ke dalam hasil poloxamer 188 lalu di kocok hingga membentuk masa homogen. Semua formula yang terbentuk termasuk asiklovir poloxamer 188 murni dianalisis karakterisasinya dengan Differential Thermal Analysis (DTA), X-ray Diffraction, Scanning Electron Microscopy (SEM), dan Fourier Transform Infrared (FTIR), kemudian pengambilan dilakukan  (penentuan kadar) mengunakan spektrofotometer UV pada panjang gelombang 257,08 nm dan uji laju disolusi dengan aquadest bebas CO2 menggunakan metode dayung. Hasil pengambilan  (penentuan kadar) menunjukkan bahwa semua formula memenuhi persyaratan farmakope Amerika edisi 30 dan farmakope Indonesia edisi 4 yaitu 95-110%. Sedangkan hasil uji laju disolusi untuk campuran fisik 1: 1, dan dispersi padat 1: 1, dan penggilingan 1: 1 menunjukkan peningkatan yang nyata dibandingkan asiklovir murni. Hal ini juga dapat dilihat dari hasil perhitungan statistik  menggunakan analisis varian satu arah  SPSS 17.

scholarly journals Easy and fast in-situ functionalization of exfoliated 2D black phosphorus with gold nanoparticles

2021 ◽  
Author(s):  
Salvatore Moschetto ◽  
Andrea Ienco ◽  
Gabriele Manca ◽  
Manuel Serrano-Ruiz ◽  
Maurizio Peruzzini ◽  
...  
Keyword(s):  
Gold Nanoparticles ◽  
Black Phosphorus ◽  
Au Nps ◽  
In Situ Functionalization

Heterostructures of single- and few-layer black phosphorus (2D bP) functionalized with gold nanoparticles (Au NPs) have been recently reported in the literature, exploiting their intriguing properties and biocompatibility for catalytic,...

Dependence of the intrinsic phase structure of Bi2O3 catalysts on photocatalytic CO2 reduction

2021 ◽  
Vol 11 (6) ◽  
pp. 2021-2025
Author(s):  
Liujin Wei ◽  
Guan Huang ◽  
Yajun Zhang
Keyword(s):  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Fourier Transform Infrared Spectroscopy ◽  
Phase Structure ◽  
Co2 Reduction ◽  
Fourier Transform Infrared ◽  
Time Resolved ◽  
Dependent Activity

The combination of time-resolved transient photoluminescence with in-situ Fourier transform infrared spectroscopy has been conducted to investigate the intrinsic phase structure-dependent activity of Bi2O3 catalyst for CO2 reduction.

Macroscopical monolayer films of ordered arrays of gold nanoparticles as SERS substrates for in-situ quantitative detection in aqueous solutions

Nanoscale ◽  
2021 ◽  
Author(s):  
Lixiang Xing ◽  
Cui Wang ◽  
Yi Cao ◽  
Jihui Zhang ◽  
Haibing Xia
Keyword(s):  
Gold Nanoparticles ◽  
Volume Fraction ◽  
Water Volume ◽  
Quantitative Detection ◽  
Monolayer Films ◽  
Au Nps ◽  
Sers Substrates ◽  
Ordered Arrays ◽  
Water Volume Fraction

In this work, macroscopical monolayer films of ordered arrays of gold nanoparticles (MMF-OA-Au NPs) are successfully prepared at the interfaces of toluene-diethylene glycol (DEG) with a water volume fraction of...

scholarly journals Facile Green, Room-Temperature Synthesis of Gold Nanoparticles Using Combretum erythrophyllum Leaf Extract: Antibacterial and Cell Viability Studies against Normal and Cancerous Cells

Antibiotics ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 893
Author(s):  
Olufunto T. Fanoro ◽  
Sundararajan Parani ◽  
Rodney Maluleke ◽  
Thabang C. Lebepe ◽  
Jose R. Varghese ◽  
...  
Keyword(s):  
Gold Nanoparticles ◽  
Cell Viability ◽  
Leaf Extract ◽  
Room Temperature ◽  
Klebsiella Oxytoca ◽  
Cost Effective ◽  
Average Diameter ◽  
Antibacterial Activities ◽  
Inhibition Concentration ◽  
First Time

We herein report a facile, green, cost-effective, plant-mediated synthesis of gold nanoparticles (AuNPs) for the first time using Combretum erythrophyllum (CE) plant leaves. The synthesis was conducted at room temperature using CE leaf extract serving as a reducing and capping agent. The as-synthesized AuNPs were found to be crystalline, well dispersed, and spherical in shape with an average diameter of 13.20 nm and an excellent stability of over 60 days. The AuNPs showed broad-spectrum antibacterial activities against both pathogenic Gram-positive (Staphylococcus epidermidis (ATCC14990), Staphylococcus aureus (ATCC 25923), Mycobacterium smegmatis (MC 215)) and Gram-negative bacteria (Proteus mirabilis (ATCC 7002), Escherichia coli (ATCC 25922), Klebsiella pneumoniae (ATCC 13822), Klebsiella oxytoca (ATCC 8724)), with a minimum inhibition concentration of 62.5 µg/mL. In addition, the as-synthesized AuNPs were highly stable with exceptional cell viability towards normal cells (BHK- 21) and cancerous cancer cell lines (cervical and lung cancer).

In Situ Exsolved Au Nanoparticles from Perovskite Oxide for Efficient Epoxidation of Styrene

2021 ◽  
Author(s):  
Yang Gao ◽  
Xing Chen ◽  
Shuqi Hu ◽  
Shiguo Zhang
Keyword(s):  
Density Functional Theory ◽  
Thermodynamic Analysis ◽  
Density Functional ◽  
Au Nanoparticles ◽  
Oxide Catalyst ◽  
Density Functional Theory Calculations ◽  
Average Diameter ◽  
Perovskite Oxide ◽  
Functional Theory

Au-doped SrTiO3 perovskite oxide catalyst (Sr0.995Au0.005TiO3-δ) has been designed and synthesized based on thermodynamic analysis and density functional theory calculations. During reduction, Au nanoparticles with an average diameter of 2...

Sign in / Sign up

Export Citation Format

Share Document