Synthesis and Characterization of Zeolite X Obtained from Coal Gangue for Adsorption of Cu2+

2021 ◽  
Vol 13 (8) ◽  
pp. 1512-1520
Author(s):  
MiaoSen Zhang ◽  
SiYang Wang ◽  
Zheng Hu ◽  
RunZe Zhang ◽  
XiaoLi Wang
Keyword(s):  
Adsorption Capacity ◽  
Adsorption Kinetics ◽  
Ph Value ◽  
Copper Ions ◽  
Removal Rate ◽  
Coal Gangue ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Zeolite X ◽  
Initial Ph

China is a big coal producing country, there are a lot of coal gangue piled up. The zeolite X was synthesized by alkali melting and hydrothermal method based on the coal gangue from Chifeng city, Inner Mongolia. The obtained zeolite X sample is characterized by X-ray diffraction, SEM, EDS spectrum and IR which showed the X zeolite is an octahedral structure with complete crystal shape and uniform grain size. The results of BET showed the specific surface area of zeolite X is 354.8 m2/g and the minimum pore size is 3.8 nm which indicated that the zeolite X belongs to mesoporous materials. The adsorption conditions of the zeolite X adsorbent on copper ions were optimized. A solution containing Cu2+ ions with an initial concentration of 300 mg/L was added to the zeolite X with a dosage of 0.1 g and the initial pH value of the solution was adjusted to 6. Then the solution was oscillated for 120 min at 225 r/min. The maximum adsorption capacity and removal rate were 148.6 mg/g and 99.1%, respectively. The adsorption mechanism was discussed by adsorption kinetics and thermodynamics. The quasi-second order kinetic equation can be well used to describe the adsorption kinetics of zeolite X to Cu2+ (R2 = 0.9994) and Langmuir can well describe the adsorption behavior of zeolite X to Cu2+ (R2 = 0.9995) which showed the adsorption is a monolayer of chemical adsorption. The adsorption capacity of zeolite X to Cu2+ is about 4.0 times that of coal gangue, indicating that the zeolite X has good adsorption capacity.

scholarly journals Chitosan Fiber as Green Material for Removing Cr(VI) and Cu(II) Contaminants:Adsorption Properties,Kinetics and Machanism

2021 ◽  
Author(s):  
shujie Zhang ◽  
Yating Zhang ◽  
Lisong Fu ◽  
Mengke Jing
Keyword(s):  
Adsorption Capacity ◽  
Ph Value ◽  
Copper Ions ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Chemical Adsorption ◽  
Adsorption Effect ◽  
Green Material ◽  
Chromium Ions ◽  
Chitosan Fiber

Abstract Chitosan (CS) fiber is used as a new green material to remove Cu(II) and Cr(VI) in wastewater.Varying factors, including pH value, dosage of CS, reaction time and original Cr (VI) contents and Cu(II) were studied to investigate the Cr (VI) and Cu(II) removal efficiency.The adsorption of two metal ions by chitosan fiber conforms to the second-order kinetic equation, and can be fitted with Langmuir isotherms. The adsorption process is a spontaneous thermal reaction with both physical adsorption and chemical adsorption, and copper ions reach adsorption equilibrium. It takes longer than chromium ions, but the adsorption effect of copper ions is better. The maximum actual adsorption capacity of copper ions is 539.6 mg/g, and the maximum adsorption capacity of chromium ions is 75 mg/g. SEM, FTIR and XRD were used to characterize the physicochemical properties of CS fiber. The result shows that the complex process of the Cr (VI) and Cu(II) removal involves physical and chemical adsorption, CS fiber have exerted significant role in Cr (VI) and Cu(II) removal.

Effect of Modification with Nitric Acid and Hydrogen Peroxide on Chromium (VI) Adsorption by Activated Carbon Fiber

2012 ◽  
Vol 518-523 ◽  
pp. 2099-2103
Author(s):  
Guang Zhou Qu ◽  
Hai Bing Ji ◽  
Ran Xiao ◽  
Dong Li Liang
Keyword(s):  
Hydrogen Peroxide ◽  
Activated Carbon ◽  
Nitric Acid ◽  
Carbon Fiber ◽  
Adsorption Capacity ◽  
Adsorption Kinetics ◽  
Ph Value ◽  
Activated Carbon Fiber ◽  
Order Kinetic ◽  
Adsorption Amount

The activated carbon fiber (ACF) was treated by different concentration nitric acid (HNO3) and hydrogen peroxide (H2O2) oxidization to enhance its adsorption capacity to hexavalent chromium (Cr6+) ion. The adsorption amount and adsorption kinetics of Cr6+ion on ACFs, and the surface chemical groups were investigated. The results showed that the modified ACFs with 1% HNO3and 10% H2O2had a better adsorption capacity, respectively. The adsorption amount of ACFs was affected strongly solution pH value, and decreased significantly with increasing of the pH value. The adsorption kinetics indicated that the adsorption rates of Cr6+ ion on different modified ACFs were well fitted with the pseudo-second-order kinetic model. After 1% HNO3and 10% H2O2modification, respectively, the total acidic oxygen-containing groups on ACFs surface had an increase obviously, which might be enhance the adsorption amount of Cr6+ion on ACFs.

Nanoparticle Fe3O4 magnetized activated carbon from Armeniaca sibirica shell for the adsorption of Hg(II) ions

BioResources ◽  
2021 ◽  
Vol 16 (3) ◽  
pp. 6100-6120
Author(s):  
Yinan Hao ◽  
Yanfei Pan ◽  
Qingwei Du ◽  
Xudong Li ◽  
Ximing Wang
Keyword(s):  
Activated Carbon ◽  
Adsorption Capacity ◽  
Ph Value ◽  
Removal Rate ◽  
Freundlich Isotherm ◽  
Entropy Change ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Adsorption Parameters ◽  
Initial Concentration

Armeniaca sibirica shell activated carbon (ASSAC) magnetized by nanoparticle Fe3O4 prepared from Armeniaca sibirica shell was investigated to determine its adsorption for Hg2+ from wastewater. Fe3O4/ASSAC was characterized using XRD (X-ray diffraction), FTIR (Fourier transform infrared spectroscopy), SEM (scanning electron microscopy), and BET (Brunauer–Emmett–Teller). Optimum adsorption parameters were determined based on the initial concentration of Hg2+, reaction time, reaction temperature, and pH value in adsorption studies. The experiment results demonstrated that the specific surface area of ASSAC decreased after magnetization; however the adsorption capacity and removal rate of Hg2+ increased 0.656 mg/g and 0.630%, respectively. When the initial concentration of Hg2+ solution was 250 mg/L and the pH value was 2, the adsorption time was 180 min and the temperature was 30 °C, and with the Fe3O4/ASSAC at 0.05 g, the adsorption reaching 97.1 mg/g, and the removal efficiency was 99.6%. The adsorption capacity of Fe3O4/ASSAC to Hg2+ was in accord with Freundlich isotherm models, and a pseudo-second-order kinetic equation was used to fit the adsorption best. The Gibbs free energy ΔGo < 0，enthalpy change ΔHo < 0, and entropy change ΔSo < 0 which manifested the adsorption was a spontaneous and exothermic process.

scholarly journals A Fungal Modified Material With High Uranium (VI) Absorption Capacity And Strong Anti-Interference Ability

2022 ◽  
Author(s):  
Ni Tan ◽  
Qiaorong Ye ◽  
Yaqing Liu ◽  
Yincheng Yang ◽  
Zui Ding ◽  
...  
Keyword(s):  
Ph Value ◽  
Orthogonal Experiment ◽  
Target Material ◽  
Absorption Capacity ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Initial Ph ◽  
Order Kinetic Model ◽  
Solid Liquid

Abstract With polydioxyethylene ether as the bridge chain, a new fungal modified material with diamidoxime groups was prepared by a series of uncomplex synthesis reaction. The orthogonal experiment obtained its optimized adsorption conditions as follows: the initial pH value 6.5, the initial uranyl concentration 40 mg L-1, the contact time 130 min, and the solid-liquid ratio 25 mg L-1. The maximum adsorption capacity of target material was 446.20 mg g-1, and it was much greater than that of the similar monoamidoxime material (295.48 mg g−1). The linear Langmuir (R2 = 0.9856) isotherm models and the linear pseudo-second-order kinetic model (R2 = 0.9931) fit the experimental data of uranium (VI) adsorption better, indicating the adsorption mechanism should mainly be the monolayer adsorption and chemical process. In addition, the relevant experiments exhibited the prepared material was of the good reuse and the excellent anti-interference performance, which suggested the new acquisition should also have well-applied prospect in the future.

The Behaviors of Removing Silver Ions by Low-Cost Expanded Rice Husk, Nature Diatomite and Nature Bentonite as Sorbents

2012 ◽  
Vol 724 ◽  
pp. 472-475
Author(s):  
Xuan Liang ◽  
Xue Gang Luo ◽  
Xiao Yan Lin ◽  
Qiang Mei
Keyword(s):  
Adsorption Capacity ◽  
Rice Husk ◽  
Ph Value ◽  
Low Cost ◽  
Silver Ions ◽  
Maximum Adsorption Capacity ◽  
Removal Of Heavy Metals ◽  
Initial Ph ◽  
Influence Of Ph ◽  
By Products

Low cost industrial and agricultural by-products are promising materials for water pollution treatment such as removal of heavy metals. This work deals with removal of silver ions from solutions using expanded rice husk (ERH), nature diatomite (ND) and nature bentonite (NB). Firstly the influence of pH value of the solution on adsorption capacity for silver ions was studied, and then the effect of initial silver concentration on adsorbents adsorption capacity was investigated. The silver ions removal percentage increases with initial pH and achieves a maximum value of nearly 94% at pH= 5.0 ± 0.5 for ERH. The maximum adsorption capacity is 18.6 mg/g for ERH.

Characteristics of Cu2+ Adsorption by Modified Rice Straw

2013 ◽  
Vol 726-731 ◽  
pp. 2622-2628
Author(s):  
Ming Da Liu ◽  
Lei Guo ◽  
Jun Yang ◽  
Yao Jing Wang
Keyword(s):  
Rice Straw ◽  
Ph Value ◽  
Removal Rate ◽  
Maximum Adsorption Capacity ◽  
Static State ◽  
Metal Biosorption ◽  
Initial Ph ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Sorption Time

In this paper, modified rice straw was investigated for its Cu2+removal ability from aqueous solution. The effects of environmental factors on metal biosorption were studied under static state, including initial concentration of metal ions, sorption time, initial pH value and adsordent dosage. In addition, the relevant equilibrium, kinetics were discussed. The results showed that the rice straw which was modified by NaOH had been improved greatly in its Cu2+removal ability. The rice straw had good effects on adsorption of low concentration of Cu2+solution. The adsorption data fit Langmuir isotherm model well, the maximum adsorption capacity for Cu2+reached 8.48 mg·g-1. The adsorption of Cu2+on the modified rice straw was a very rapid process, the kinetics fit a pseudo-second-order equation well. The pH value had prominent effect on the removal rate of Cu2+, adsorption efficient could reach over 92% when pH value was between 5 and 6.5. With increasing adsordent dosage, the removal rate of Cu2+increased.

Adsorption of lead using a novel xanthated carboxymethyl chitosan

2013 ◽  
Vol 69 (2) ◽  
pp. 298-304 ◽  
Author(s):  
Qingping Song ◽  
Chongxia Wang ◽  
Ze Zhang ◽  
Jiangang Gao
Keyword(s):  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Adsorption Mechanism ◽  
Ph Value ◽  
Carboxymethyl Chitosan ◽  
Langmuir Model ◽  
Maximum Adsorption Capacity ◽  
Visible Spectra ◽  
Initial Ph ◽  
Uv Visible

Adsorption of Pb(II) was studied using a novel xanthated carboxymethyl chitosan (XCC). The XCC was synthesized using the xanthation reaction of N-carboxymethyl chitosan (NCMC). The chemical structure of XCC was characterized by UV–visible spectra. The effects of initial pH value of the solutions, contact time and adsorption isotherms on adsorption of Pb(II) were investigated. Moreover, the possible adsorption mechanism was identified using Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The experimental results showed XCC experienced a high adsorption capacity. The adsorption isotherm followed the Langmuir model. The maximum adsorption capacity obtained from the Langmuir model was 520.8 mg/g. Thermodynamic studies revealed a spontaneous and exothermic adsorption process. FTIR and XPS studies showed that the carboxyl groups, nitrogen atoms and sulfur atoms participated in the adsorption of Pb(II).

scholarly journals KINETIC AND ISOTHERM STUDY OF CUPPER ADSORPTION FROM AQUEOUS SOLUTION USING WASTE EGGSHELL

2014 ◽  
Vol 22 (2) ◽  
pp. 132-140 ◽  
Author(s):  
Ayben Polat ◽  
Sukru Aslan
Keyword(s):  
Ph Value ◽  
Experimental System ◽  
Second Order ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Isotherm Study ◽  
Initial Ph ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

The sorption of Cu2+ ions from aqueous solutions by eggshell was investigated in a batch experimental system with respect to the temperature, initial Cu2+ concentrations, pH, and biosorbent doses. The adsorption equilibrium was well described by the Langmuir isotherm model with the maximum adsorption capacity of 5.05 mg Cu2+/g eggshell at 25 °C. The value of qe increased with increasing the temperature while also increases the release of Ca2+ and HCO−3 ions from the eggshell. The highest sorption of Cu onto the waste eggshell was determined at the initial pH value of 4.0. The results confirming that the adsorption reaction of Cu2+ on the eggshell was thought to be endothermic. A comparison of the kinetic models such as pseudo first and second-order kinetics, intraparticle diffusion, and Elovich on the sorption rate demonstrated that the system was best described by the pseudo second-order kinetic model.

scholarly journals Ultra-efficient Copper Ions Adsorption of Chitosan-montmorillonite Composite Aerogel for Wastewater Treatment

2021 ◽  
Author(s):  
Xin Ye ◽  
Sisi Shang ◽  
Yifan Zhao ◽  
Sheng Cui ◽  
Ya Zhong ◽  
...  
Keyword(s):  
Copper Ions ◽  
Removal Rate ◽  
Three Dimensional ◽  
High Specific Surface Area ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Two Dimensional ◽  
Composite Aerogel ◽  
Order Kinetic Model ◽  
And Performance

Abstract The modified montmorillonite(MMT) has a two-dimensional stable and ordered lamellar structure. The addition of chitosan(CS) cross-links the two-dimensional sheets to build a three-dimensional network structure with a high specific surface area. We have prepared the best MMT-based water treatment materials that have been reported. This new type of aerogel can efficiently adsorb heavy metal ions in wastewater. The structure and performance of the composite material were characterized in this article. Besides, the adsorption kinetics, adsorption thermodynamics, pH influence, and recycling performance are all focused on. The adsorption equilibrium time of CS-MMT2 is 50 min. The removal rate of Cu2+ is as high as 98.21%. The maximum adsorption capacity is 86.95 mg/g. The adsorption process of Cu2+ by CS-MMT composite aerogel conforms to the quasi-second-order kinetic model and the Langrangian adsorption isotherm. After three cycles, the removal rate of Cu2+ by CS-MMT2 remained above 80%. This article also involves the discussion of the material's adsorption mechanism for Cu2+. This is a kind of environmentally friendly material that can be mass-produced, cheap, efficient, and excellent, which is of great significance to the development of environmental protection.

Adsorption of Zn(II) in Aqueous Solutions by Kaolin

2012 ◽  
Vol 554-556 ◽  
pp. 2041-2044
Author(s):  
Jun Jin Chen ◽  
Guo Xiang Pan ◽  
Yan Fei Yu
Keyword(s):  
Kinetic Equation ◽  
Adsorption Capacity ◽  
Ph Value ◽  
Model Fitting ◽  
Order Kinetic ◽  
Freundlich Model ◽  
Initial Ph ◽  
Higher Temperature ◽  
Better Than ◽  
Adsorption Activation Energy

In this paper, adsorption performance of Zn(II) in simulative waste water by kaolin was studied, and the influences of solution initial pH value, temperature, adsorption time, concentration of Zn(II) were tested. Moreover, the thermodynamic parameters and kinetic equation were calculated. The results show that Zn(II) adsorption capacity firstly increases and then decreases as the pH increases, and the higher temperature, the better adsorption capacity. The Zn(II) adsorption occurs mainly within 60 minutes, and then leveling off. The calculations show that linear correlation coefficient (R2) of langmuir equation is better than the freundlich model fitting results, and Zn(II) adsorption can occur spontaneously, is an endothermic and entropy increasing process. In addition, first-order kinetic equation is more suitable for the description of Zn(II) adsorption mechanism, and adsorption activation energy equals 21.51 kJ•mol-1.

Sign in / Sign up

Export Citation Format

Share Document