Design and Performance Analysis of Application Specific Integrated Circuit for Internet of Things Applications

2020 ◽  
Vol 18 (9) ◽  
pp. 700-705
Author(s):  
Vivek Pogra ◽  
Amandeep Singh ◽  
Santosh Kumar Vishvakarma ◽  
Balwinder Raj

This paper proposes a novel design of application specific integrated circuit (ASIC) which is capable of connecting sensor network and other electronic systems to the internet. The transfer of data between different networks and electronic systems is controlled by internet of things (IoT) platform with the help of instruction sent to ASIC. ASIC will act as serial peripheral interface (SPI) master to all connected networks and data will be transferred serially between them. The different ASIC modules are SPI module, control module, memory module and data/instruction decoder with additional modules built-in self-test (BIST) and direct memory access (DMA). The proposed ASIC will consume less power as compared to conventional microcontroller/microprocessor due to SPI feature along with DMA on ASIC for IoT applications. It is described in very high speed integrated circuit hardware description language (VHDL) at register transfer level (RTL) and simulation is done on the Vivado 2016.2.

2020 ◽  
Vol 18 (1) ◽  
pp. 31-38
Author(s):  
Vivek Pogra ◽  
Santosh Kumar Vishvakarma ◽  
Balwinder Raj

This paper proposes a novel design of application specific integrated circuit (ASIC) which is capable of connecting sensor network and other electronic systems to the Internet. The transfer of data between different networks and internet of things (IoT) platform is controlled by IoT platform with the help of instruction sent to ASIC. ASIC will act as serial peripheral interface (SPI) master to all connected networks and data will be transferred serially between them. The different ASIC modules are SPI module, control module, memory module and data/instruction decoder with additional modules built-in self-test (BIST) and direct memory access (DMA). The proposed ASIC will consume less power as compared to conventional microcontroller/microprocessor due to the fact that it is designed for IoT applications. It is described in VHDL at RTL level and simulation is done on the Vivado 2016.2.


PLoS ONE ◽  
2021 ◽  
Vol 16 (11) ◽  
pp. e0259956
Author(s):  
Md. Liakot Ali ◽  
Md. Shazzatur Rahman ◽  
Fakir Sharif Hossain

This paper presents the design of a Built-in-self-Test (BIST) implemented Advanced Encryption Standard (AES) cryptoprocessor Application Specific Integrated Circuit (ASIC). AES has been proved as the strongest symmetric encryption algorithm declared by USA Govt. and it outperforms all other existing cryptographic algorithms. Its hardware implementation offers much higher speed and physical security than that of its software implementation. Due to this reason, a number of AES cryptoprocessor ASIC have been presented in the literature, but the problem of testability in the complex AES chip is not addressed yet. This research introduces a solution to the problem for the AES cryptoprocessor ASIC implementing mixed-mode BIST technique, a hybrid of pseudo-random and deterministic techniques. The BIST implemented ASIC is designed using IEEE industry standard Hardware Description Language(HDL). It has been simulated using Electronic Design Automation (EDA)tools for verification and validation using the input-output data from the National Institute of Standard and Technology (NIST) of the USA Govt. The simulation results show that the design is working as per desired functionalities in different modes of operation of the ASIC. The current research is compared with those of other researchers, and it shows that it is unique in terms of BIST implementation into the ASIC chip.


Author(s):  
Raaed Faleh Hassan

The work presented in this paper illuminates the design and simulation of a recursive or Infinite Impulse Response (IIR) filter. The proposed design algorithm employs the Genetic Algorithm to determine the filter coefficients to satisfy the required performance. The effectiveness of different platforms on filter design and performance has been studied in this paper. Three different platforms are considered to implement and verify the designed filter’s work through simulation. The first platform is the MATLAB/SIMULINK software package used to implement the Biquad form filter. This technique is the basis for the software implementation of the designed IIR filter. The HDL – Cosimulation technique is considered the second one; it inspired to take advantage of the existing tools in SIMULINK to convert the designed filter algorithm to the Very high-speed integrated circuit Hardware Description Language (VHDL) format. The System Generator is employed as the third technique, in which the designed filter is implemented as a hardware structure based on basic unit blocks provided by Xilinx System Generator. This technique facilitates the implementation of the designed filter in the FPGA target device. Simulation results show that the performance of the designed filter is remarkably reliable even with severe noise levels.


2021 ◽  
Author(s):  
Χρήστος Μπακάλης

Ο Μεγάλος Επιταχυντής Αδρονίων (Large Hadron Collider (LHC)), του Ευρωπαϊκού Κέντρου Πυρηνικών Ερευνών (CERN) ξεκίνησε να επιταχύνει τις πρώτες του δέσμες το 2008. Από τις πρώτες μέρες λειτουργίας του, ο LHC έχει επιτρέψει στην επιστημονική κοινότητα να τελέσει πρωτοπόρα πειράματα, που έχουν σαν στόχο να απαντήσουν θεμελιώδη ερωτήματα για τη φύση της ύλης και της ενέργειας. Επειδή τα πειράματα φυσικής υψηλών ενεργειών είναι βασισμένα στη συλλογή δεδομένων μεγάλης κλίμακας, η αύξηση του ρυθμού αντιδράσεων θεωρείται θέμα μείζονας σημασίας. Όσο πιο υψηλός ο ρυθμός αλληλεπιδράσεων, τόσο περισσότερα δεδομένα καταγράφονται, και σπάνια φαινόμενα που υπό άλλες συνθήκες θα επικαλύπτονταν από άλλες διεργασίες, περισσότερο συχνές, θα μπορέσουν να μελετηθούν. Για το λόγο αυτό, ο LHC θα προβεί στις ανάλογες αναβαθμίσεις, οι οποίες θα αυξήσουν την ενέργεια κέντρου μάζας, και την φωτεινότητά του. Επιπλέον αναβαθμίσεις που θα οδηγήσουν στην Phase-II 2026-2038, θα αυξήσουν τη φωτεινότητα ακόμα περισσότερο, με την ενέργεια κέντρου μάζας να φτάνει τα 14 TeV. Η αύξηση της φωτεινότητας θα οδηγήσει και σε αύξηση του ρυθμού αλληλεπιδράσεων, άρα και στη ροή σωματιδίων που διαπερνούν τους ανιχνευτές του μεγάλου επιταχυντή αδρονίων. Για αυτό το λόγο ο ανιχνευτής Toroidal LHC ApparatuS (ATLAS), που είναι ο μεγαλύτερος του LHC, θα αντικαταστήσει τα εσωτερικά καπάκια του μιονικού φασματομέτρου κατά τη διάρκεια της δεύτερης μεγάλης παύσης. Η αναβάθμιση New Small Wheel (NSW) όπως καλείται, θα αποτελείται από δύο τεχνολογίες ανιχνευτών, τους Micromegas (MM) και τους small-strip Thin Gap Chambers (sTGC). Ο NSW έχει σχεδιαστεί να υπομένει το αυξημένο υπόβαθρο λόγω των αναβαθμίσεων του επιταχυντή, προσφέροντας δεδομένα ανακατασκευής τροχιών μιονίων στον ATLAS, καθώς και πληροφορίες σκανδαλισμού. Ο ακρογωνιαίος λίθος του συστήματος ανάγνωσης δεδομένων του NSW, είναι το VMM Application-Specific Integrated Circuit (ASIC), μία ηλεκτρονική μονάδα που θα χρησιμοποιηθεί και από τις δύο τεχνολογίες ανιχνευτών του NSW. Λόγω του σχεδιασμού του, το VMM έχει προταθεί και σε μία πληθώρα άλλων πειραμάτων που κάνουν χρήση ανάλογων ανιχνευτικών συστημάτων. Το VMM αποτελείται από 64 ανεξάρτητα κανάλια, κάθε ένα εκ των οποίων προβαίνει σε μετρήσεις ακριβείας πάνω στους ηλεκτρονικούς παλμούς που δημιουργούνται από τους ανιχνευτές όταν διαπεραστούν από μιόνια, ενώ προσφέρει και γρήγορα δεδομένα για το σύστημα σκανδαλισμού του ATLAS. Η πρώτη έκδοση του VMM έκανε την εμφάνισή του το 2012, και μετά από τέσσερις εκδόσεις, αποφάνθηκε ότι είναι έτοιμο να εξυπηρετήσει τις ανάγκες του NSW. Καμία από αυτές τις αναβαθμίσεις δεν θα μπορούσε να είχε ολοκληρωθεί, αν δεν υπήρχε μία αξιόπιστη πλατφόρμα χαρακτηρισμού της μονάδας. Αυτή η πλατφόρμα ήρθε στη μορφή του VMM Readout System (VRS), που κάνει χρήση μονάδων Field-Programmable Gate Array (FPGA), προκειμένου να ληφθούν τα δεδομένα από το VMM, και να διαμορφωθεί τη λειτουργία του. Με έμφαση στην ευελιξία, το υλικολογισμικό των FPGA του VRS, είχε σχεδιαστεί με τέτοιο τρόπο προκειμένου να εξυπηρετήσει διάφορα σενάρια λήψης δεδομένων (π.χ. εργαστηριακές συνθήκες χωρίς ανιχνευτή, ή τεστ-δέσμης). Ένα μεγάλο κομμάτι της παρούσας διατριβής αφιερώνεται στην περιγραφή της αρχιτεκτονικής του εν λόγω υλικολογισμικού, που αναπτύχθηκε για να καλύψει τις ανάγκες της αναβάθμισης του ATLAS NSW. Το σύστημα χρησιμοποιήθηκε για να επιβεβαιώσει την ορθή λειτουργία του VMM, να κάνει τον μαζικό έλεγχο των τελικών μονάδων του VMM πριν αυτά εγκατασταθούν στον ATLAS, και να λάβει τα δεδομένα από το VMM, μαζί με τον ανιχνευτή Micromegas, σε συνθήκες τεστ-δέσμης. Μετά την παραγωγή των τελικών μονάδων ASIC που διαβάζουν και διαμορφώνουν τις λειτουργίες του VMM στο πείραμα ATLAS, το σύστημα που βασιζόταν σε FPGA αντικαταστάθηκε από το τελικό, που είχε σα βάση ένα σύστημα λήψης δεδομένων επόμενης γενιάς, που ονομάζεται Front-End LInk eXchange (FELIX). Ένα ποσοστό της παρούσας εργασίας περιγράφει τα εργαλεία λογισμικού που αναπτύχθηκαν προκειμένου να διευκολυνθεί η διαδικασία ενσωμάτωσης του ηλεκτρονικού συστήματος του NSW με το FELIX. Επίσης, τα εν λόγω πακέτα λογισμικού χρησιμοποιήθηκαν και για στη διαδικασία ελέγχου της ορθής λειτουργίας των τελικών ανιχνευτών του Micromegas, πριν αυτοί εγκατασταθούν στον ATLAS, καθώς τα δεδομένα τους λαμβάνονταν από το τελικό σύστημα λήψης δεδομένων. Το τελευταίο Κεφάλαιο της παρούσας διατριβής, αφιερώνεται στην περιγραφή του Slow Control Adapter eXtension (SCAX), το οποίο είναι ένα πακέτο υλικολογισμικού που ενσωματώνεται σε ένα FPGA και μιμείται μία βασική ηλεκτρονική μονάδα του NSW, ονόματι SCA ASIC. Το SCA είναι μια μονάδα που βρίσκεται στα ηλεκτρονικά του NSW, και χρησιμοποιείται για τη διαμόρφωση των λειτουργιών όλων των άλλων μονάδων ASIC του συστήματος. To SCAX από την άλλη, έχει σχεδιαστεί για να υποστηρίξει FPGA που είναι επίσης μέρος του συστήματος ηλεκτρονικών του ATLAS, και βρίσκονται μακριά από περιοχές υψηλής ραδιενέργειας. Δίνει τη δυνατότητα στο χρήστη του να γράψει παραμέτρους διαμόρφωσης λειτουργιών στη λογική του FPGA που βρίσκεται, και να αναγνώσει τιμές κατάστασης από καταχωρητές του υπόλοιπου υλικολογισμικού. Το SCAX μιμείται το πρωτόκολλο I2C που το SCA χρησιμοποιεί για να επικοινωνήσει με άλλες συσκευές, ενώ επίσης μιμείται και το πρωτόκολλο μεταξύ αυτού και του συστήματος FELIX. Με αυτόν τον τρόπο, επιτρέπει τη χρήση της ήδη υπάρχουσας υποδομής λογισμικού και ηλεκτρονικών, ώστε να διαμορφώσει τις λειτουργίες του FPGA μέσα στο οποίο έχει υλοποιηθεί. Το SCAX χρησιμοποιείται από τον επεξεργαστή σκανδαλισμού του NSW, και μπορεί να χρησιμοποιηθεί από οποιοδήποτε FPGA που επικοινωνεί με το FELIX.


Electronics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 679
Author(s):  
Jongpal Kim

An instrumentation amplifier (IA) capable of sensing both voltage and current at the same time has been introduced and applied to electrocardiogram (ECG) and photoplethysmogram (PPG) measurements for cardiovascular health monitoring applications. The proposed IA can switch between the voltage and current sensing configurations in a time–division manner faster than the ECG and PPG bandwidths. The application-specific integrated circuit (ASIC) of the proposed circuit design was implemented using 180 nm CMOS fabrication technology. Input-referred voltage noise and current noise were measured as 3.9 µVrms and 172 pArms, respectively, and power consumption was measured as 34.9 µA. In the current sensing configuration, a current noise reduction technique is applied, which was confirmed to be a 25 times improvement over the previous version. Using a single IA, ECG and PPG can be monitored in the form of separated ECG and PPG signals. In addition, for the first time, a merged ECG/PPG signal is acquired, which has features of both ECG and PPG peaks.


1994 ◽  
Vol 04 (04) ◽  
pp. 501-516 ◽  
Author(s):  
BOGDAN T. FIJALKOWSKI ◽  
JAN W. KROSNICKI

Concepts of the electronically-controlled electromechanical/mechanoelectrical Steer-, Autodrive- and Autoabsorbable Wheels (SA2W) with their brushless Alternating Current-to-Alternating Current (AC-AC), Alternating Current-to-Direct Current-Alternating Current (AC-DC-AC) and/or Direct Current-to-Alternating Current (DC-AC)/Alternating Current-to-Direct Current (AC-DC) macroelectronic converter commutator (macro-commutator) wheel-hub motors/generators with the Application Specific Integrated Matrixer (ASIM) macroelectronic converter commutators (ASIM macrocommutators) and Application Specific Integrated Circuit (ASIC) microelectronic Neuro-Fuzzy (NF) computer (processor) controllers (ASIC NF microcontrollers) for environmentally-friendly tri-mode supercars (advanced ultralight hybrids) have been conceived by the first author and designed by both authors with the Cracow University of Technology’s Automotive Mechatronics Research and Development (R&D) Team. These electromechanical/mechanoelectrical wheel-hub motors/generators, respectively, for instance, can be composed of the outer rotor with the Interior Permanent Magnet (IPM) poles and the inner stator that has the three-phase armature winding. The macroelectronic converter commutator establishes the AC-AC cycloconverter, AC-DC rectifier-DC-AC inverter and/or DC-AC inverter/AC-DC rectifier ASIM macrocommutator. The microelectronic NF computer (processor) controller establishes the ASIC microcomputer-based NF microcontroller. By adopting continuous semiconductor bipolar electrical valves in the high-power ASIM, it has been able to increase the commutation (switching) frequency and reduce harmonic losses of the electromechanical/mechanoelectrical wheel-hub motors/generators, respectively.


2014 ◽  
pp. 27-33
Author(s):  
Mounir Bouhedda ◽  
Mokhtar Attari

The aim of this paper is to introduce a new architecture using Artificial Neural Networks (ANN) in designing a 6-bit nonlinear Analog to Digital Converter (ADC). A study was conducted to synthesise an optimal ANN in view to FPGA (Field Programmable Gate Array) implementation using Very High-speed Integrated Circuit Hardware Description Language (VHDL). Simulation and tests results are carried out to show the efficiency of the designed ANN.


Author(s):  
Liu Yue ◽  
Zhao Chun ◽  
Zhang Lin

In the process of complex product design, modeling in different fields and different disciplines is often involved. Designers often face many different development kits, platforms, and theories, among which significant differences exist. Especially in the process of algorithm-hardware implementation, it is necessary to have mastery of the knowledge including algorithm, hardware, circuit, and system engineering. In this paper, a modeling method of algorithm-hardware based on SysML is proposed to reduce the difficulty of algorithm-hardware modeling. By using the method, the designers who do not know the knowledge of hardware can also easily build the algorithm-hardware model. In this method, a method of graphical system modeling based on SysML is used, where the elements of the algorithm-hardware model are described by SysML graphical models. Then, the SysML graphical models are converted to Very-High-Speed Integrated Circuit Hardware Description Language. At last, a detecting algorithm of random number is complemented by the modeling method in this paper and the simulation results are presented at the conclusion.


Sign in / Sign up

Export Citation Format

Share Document