The effect of silica modified by deep eutectic solvents on the properties of nature rubber/silica composites

2021 ◽  
pp. 009524432110200
Author(s):  
Hao Yang ◽  
Liu Yang ◽  
Huaiqing Guo ◽  
Wenbo Hu ◽  
Aihua Du
Keyword(s):  
Dynamic Properties ◽  
Low Cost ◽  
Choline Chloride ◽  
Deep Eutectic Solvent ◽  
Rolling Resistance ◽  
Molar Ratio ◽  
Skid Resistance ◽  
Modified Silica ◽  
Scanning Calorimetry ◽  
Wet Skid Resistance

The effect of deep eutectic solvent (DES) modified silica on the properties of nature rubber (NR) composites were investigated. The DES is an environment-friendly and low-cost solvent, which was prepared by mixing choline chloride and urea in a 1:2 molar ratio. The NR composites filled with DES modified silica were prepared and the properties were tested. The interaction between the DES and silica were characterized by Fourier transform infrared spectroscopy (FTIR), the interaction between silica and silica were tested by differential scanning calorimetry (DSC). The dynamic properties, such as rolling resistance and wet skid resistance, and were tested by dynamic mechanical analysis (DMA). Morphologies of the composites were characterized by scanning electron microscopy (SEM). The results indicate that the DES can interact with silica by hydrogen bond to improve the compatibility between the rubber and silica. When the content of DES was 3 phr, the tensile strength, modulus at 300%, tear strength, and the crosslinking density of the composites was increased. At the same time, the proper content of DES can reduce the rolling resistance of the vulcanized rubber while maintaining good wet skid resistance.

EFFECT OF ELASTOMER NANOPARTICLES ON IMPROVING THE WET SKID RESISTANCE OF SBR/NR COMPOSITES

2016 ◽  
Vol 89 (2) ◽  
pp. 262-271 ◽  
Author(s):  
Qingguo Wang ◽  
Jingrui Liu ◽  
Quande Cui ◽  
Xiao Xiao
Keyword(s):  
Dynamic Properties ◽  
Rolling Resistance ◽  
Dynamic Mechanical Properties ◽  
Fatigue Properties ◽  
Styrene Butadiene Rubber ◽  
Skid Resistance ◽  
Butadiene Rubber ◽  
Temperature Range ◽  
Styrene Butadiene ◽  
Wet Skid Resistance

ABSTRACT How to improve the wet skid resistance of rubber composites for tire tread while decreasing the rolling resistance is very important for both rubber researchers and industry. The irradiation-vulcanized elastomer particles, ultrafine fully-vulcanized powder nitrile butadiene rubber (UFPNBR), having the diameter of about 80 nm, were studied on modifying the dynamic mechanical properties of styrene butadiene rubber/natural rubber (SBR/NR) composites for tire tread. It is notable that the UFPNBR particles can improve the tanδ values of SBR/NR composites in a temperature range from −10 to 20 °C and decrease the tanδ values in the temperature range from 50 to 70 °C simultaneously, which indicates that the UFPNBR particles not only can improve the wet skid resistance but also can reduce the rolling resistance of the SBR/NR composites. On the other hand, the UFPNBR-modified SBR/NR composites also have good dynamic properties for safety operation of tires at high temperature and good tensile strength, tear strength, and fatigue properties in the range of 8 phr UFPNBR loadings.

INFLUENCES OF THE COMPATIBILITY OF NR/SSBR AND PHASE-SELECTIVE DISTRIBUTION OF SILICA ON ITS STATIC AND DYNAMIC PROPERTIES

2019 ◽  
pp. 000-000
Author(s):  
Qing-Yuan Han ◽  
Xu Li ◽  
Yu-Chun Li ◽  
You-Ping Wu
Keyword(s):  
Dynamic Properties ◽  
Rolling Resistance ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Scanning Calorimetry ◽  
Transmission Electron ◽  
Bound Rubber ◽  
Tan Δ ◽  
Styrene Butadiene ◽  
Wet Skid Resistance

ABSTRACT The compatibility between solution polymerized styrene–butadiene rubber (SSBR 2466) and natural rubber (NR) is characterized by differential scanning calorimetry and dynamic mechanical thermal analysis. The single glass transition in the entire temperature range of all NR/SSBR blends and good correlation between Tg and SSBR fraction prove the excellent compatibility between SSBR 2466 and NR. With increasing SSBR content, a reduced Payne effect, more homogeneous dispersion of silica, stronger rubber–filler interaction, and more silica selectively distributed in the SSBR phase were determined via rubber-processing analysis, transmission electron microscopy, bound rubber, and thermogravimetric analysis, respectively. The high vinyl content, low styrene content, and end-functionalized structure of SSBR play vital roles in promoting its compatibility with NR and a stronger rubber–silica linkage. The resulting increased tan δ at 0 °C and low tan δ at 60 °C indicates good wet-skid resistance and low rolling resistance by blending SSBR 2466, and 70/30 NR/SSBR is the best balance for producing a “green tire” tread.

scholarly journals Preparation and Performance of Silica/ESBR Nanocomposites Modified by Bio-Based Dibutyl Itaconate

Polymers ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 1820 ◽  
Author(s):  
Haijun Ji ◽  
Hui Yang ◽  
Liwei Li ◽  
Xinxin Zhou ◽  
Lan Yin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Rolling Resistance ◽  
Styrene Butadiene Rubber ◽  
Skid Resistance ◽  
Butadiene Rubber ◽  
Modified Silica ◽  
Tan Δ ◽  
Styrene Butadiene ◽  
Hydroxy Groups ◽  
Wet Skid Resistance

Ester-functionalized styrene-butadiene rubber (dibutyl itaconate-styrene-butadiene rubber) (D-ESBR) was synthesized by low-temperature emulsion polymerization using dibutyl itaconate (DBI) as a modified monomer containing ester groups. Nonpetroleum-based silica with hydroxy groups was used as a filler to enhance the D-ESBR, which can provide excellent mechanical properties, low rolling resistance, and high wet skid resistance. During the preparation of the silica/D-ESBR nanocomposites, a hydrogen-bonding interface was formed between the hydroxy groups on the surface of silica and the ester groups in the D-ESBR macromolecules. As the content of ester groups in the D-ESBR increases, the dispersion of silica in the nanocomposites is gradually improved, which was verified by rubber process analyzer (RPA) and scanning electron microscopy (SEM). Overall mechanical properties of the silica/D-ESBR modified with 5 wt % DBI were improved and became superior to that of the non-modified nanocomposite. Compared with the non-modified silica/D-ESBR, the DBI modified silica/D-ESBR exhibited a lower tan δ value at 60 °C and comparable tan δ value at 0 °C, indicating that the DBI modified silica/D-ESBR had lower rolling resistance without sacrificing wet skid resistance.

EFFECTS OF BLEND RATIO AND SBR TYPE ON PROPERTIES OF SILICA-FILLED SBR/NR TIRE TREAD COMPOUNDS

2016 ◽  
Vol 89 (2) ◽  
pp. 240-250 ◽  
Author(s):  
Pongdhorn Sae-oui ◽  
Krisda Suchiva ◽  
Uthai Thepsuwan ◽  
Wenussarin Intiya ◽  
Pram Yodjun ◽  
...  
Keyword(s):  
Dynamic Properties ◽  
Rolling Resistance ◽  
Skid Resistance ◽  
Blend Ratio ◽  
Elongation At Break ◽  
Tear Strength ◽  
Cure Time ◽  
Lower Heat ◽  
Heat Buildup ◽  
Wet Skid Resistance

ABSTRACT The influences of blend ratio between SBR and NR and SBR type, emulsion SBR (E-SBR) and solution SBR (S-SBR), on properties of silica-filled passenger car tire tread–based compounds were investigated. Results reveal that, with increasing NR proportion, cure time and most mechanical and dynamic properties, for example, tensile strength, tear strength, modulus, abrasion resistance, and wet skid resistance of the compounds and vulcanizates, are reduced, whereas the improvements in elongation at break and crack growth resistance are observed. The unexpectedly impaired mechanical and dynamic properties identified in the presence of NR are mainly caused by thermal degradation of NR taking place during the mixing process at high temperature. Compared with E-SBR, S-SBR provides superior properties in many aspects, that is, higher modulus and greater abrasion and wet skid resistances as well as lower heat buildup and rolling resistance. However, E-SBR gives greater tear strength than S-SBR.

scholarly journals Extraction of Keratin from Rabbit Hair by a Deep Eutectic Solvent and Its Characterization

Polymers ◽  
2018 ◽  
Vol 10 (9) ◽  
pp. 993 ◽  
Author(s):  
Dongyue Wang ◽  
Xu-Hong Yang ◽  
Ren-Cheng Tang ◽  
Fan Yao
Keyword(s):  
Molecular Weight ◽  
Amino Acid ◽  
Freeze Drying ◽  
Choline Chloride ◽  
Deep Eutectic Solvent ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Dissolution Temperature ◽  
Α Helix

Keratin from a variety of sources is one of the most abundant biopolymers. In livestock and textile industries, a large amount of rabbit hair waste is produced every year, and therefore it is of great significance to extract keratin from waste rabbit hair in terms of the treatment and utilization of wastes. In this study, a novel, eco-friendly and benign choline chloride/oxalic acid deep eutectic solvent at a molar ratio of 1:2 was applied to dissolve waste rabbit hair, and after dissolution keratin was separated by dialysis, filtration, and freeze-drying. The dissolution temperature effect was discussed, and the resulting keratin powder was characterized by X-ray diffraction, scanning electron microscope, Fourier transform infrared spectroscopy, protein electrophoresis, thermogravimetry and differential scanning calorimetry, and amino acid analysis. During the dissolution process, the α-helix structure of rabbit hair was deconstructed, and the disulfide bond linkages were broken. The solubility of rabbit hair was significantly enhanced by increasing dissolution temperature, and reached 88% at 120 °C. The keratin produced by dissolving at 120 °C displayed flaky powders after freeze-drying, and had a molecular weight ranging from 3.8 to 5.8 kDa with a high proportion of serine, glutamic acid, cysteine, leucine, and arginine. Such features of molecular weight and amino acid distribution provide more choices for the diverse applications of keratin materials.

Application of Deep Eutectic Solvent (DES) as a Reaction Media for the Esterification of Acrylic Acid with n-Butanol

2015 ◽  
Vol 13 (3) ◽  
pp. 389-393 ◽  
Author(s):  
Emine Sert
Keyword(s):  
Catalytic Activity ◽  
Acrylic Acid ◽  
Batch Reactor ◽  
Choline Chloride ◽  
Deep Eutectic Solvent ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Toluene Sulfonic Acid ◽  
Effects Of Temperature ◽  
Reaction Media

Abstract Within the framework of green chemistry, catalysts should be met different criteria such as biodegradability, recyclability, flammability, non-toxicity and low price. Acidic deep eutectic solvent (DES) have been synthesized for this purpose, by mixing para-toluene sulfonic acid and choline chloride. The catalytic activity of DES was studied in the esterification of acrylic acid with n-butanol. The usage of DES as catalyst is simple, safe and cheap. The effects of temperature, catalyst loading, n-butanol/acrylic acid molar ratio on the conversion of acrylic acid were performed. The batch reactor experiments were carried out at temperatures of 338, 348, 358 and 368 K, molar ratio of butanol to acrylic acid of 1, 2,3 and catalyst loading of 10, 15, 20 and 90 g/L. 90.2% of acrylic acid conversion was achieved at a temperature of 358 K and catalyst loading of 20 g/L. Reusability of DES was investigated. Reusability and catalytic activity makes DES efficient as catalyst.

scholarly journals Theoretical and Economic Evaluation of Low-Cost Deep Eutectic Solvents for Effective Biogas Upgrading to Bio-Methane

Energies ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 3379
Author(s):  
Edyta Słupek ◽  
Patrycja Makoś ◽  
Jacek Gębicki
Keyword(s):  
Economic Evaluation ◽  
Excess Enthalpy ◽  
Low Cost ◽  
Choline Chloride ◽  
Unit Cost ◽  
Deep Eutectic Solvents ◽  
Molar Ratio ◽  
Biogas Upgrading ◽  
Screening Model ◽  
Effective Removal

This paper presents the theoretical screening of 23 low-cost deep eutectic solvents (DESs) as absorbents for effective removal of the main impurities from biogas streams using a conductor-like screening model for real solvents (COSMO-RS). Based on thermodynamic parameters, i.e., the activity coefficient, excess enthalpy, and Henry’s constant, two DESs composed of choline chloride: urea in a 1:2 molar ratio (ChCl:U 1:2), and choline chloride: oxalic acid in a 1:2 molar ratio (ChCl:OA 1:2) were selected as the most effective absorbents. The σ-profile and σ-potential were used in order to explain the mechanism of the absorptive removal of CO2, H2S, and siloxanes from a biogas stream. In addition, an economic analysis was prepared to demonstrate the competitiveness of new DESs in the sorbents market. The unit cost of 1 m3 of pure bio-methane was estimated to be in the range of 0.35–0.37 EUR, which is comparable to currently used technologies.

Effect of Rotation Speed and Discharging Temperature on SSBR-Silica Interaction

2016 ◽  
Vol 717 ◽  
pp. 3-8 ◽  
Author(s):  
Ji Wen Liu ◽  
Tao Zhuang ◽  
Guang Shui Yu ◽  
Shu Gao Zhao
Keyword(s):  
Rotation Speed ◽  
Rolling Resistance ◽  
Strength Increase ◽  
Skid Resistance ◽  
Rotor Speed ◽  
Rubber Content ◽  
Elongation At Break ◽  
Dynamic Viscoelasticity ◽  
Bound Rubber ◽  
Wet Skid Resistance

The effects of rotor speed and discharging temperature on silica 1165MP-SSBR 5025-2 interaction as well as the mechanical properties and dynamic viscoelasticity are investigated in this work. The result shows that the discharging temperature increases linearly with increase of rotation speed, leading to increase of bound rubber content. The tensile strength, elongation at break and tear strength increase firstly, and then decrease with increase of rotation speed. However, the strength at 100% and 300% deformation decrease, and then they increase. The wet skid resistance of SSBR5025-2 filled with silica 1165MP improves with increase of rotation speed and discharging temperature, and the rolling resistance decreases.

scholarly journals The Anodic Behaviour of Bulk Copper in Ethaline and 1-Butyl-3-Methylimidazolium Chloride

2019 ◽  
Vol 9 (20) ◽  
pp. 4401 ◽  
Author(s):  
Karim ◽  
Aziz ◽  
Brza ◽  
Abdullah ◽  
Kadir
Keyword(s):  
Electrochemical Impedance ◽  
Choline Chloride ◽  
Metallic Copper ◽  
Electrochemical Techniques ◽  
Deep Eutectic Solvent ◽  
Molar Ratio ◽  
Interfacial Region ◽  
Dissolution Mechanism ◽  
Spectroscopic Techniques ◽  
Electrochemical Dissolution

The anodic dissolution of bulk metallic copper was conducted in ionic liquids (ILs)—a deep eutectic solvent (DES) ((CH3)3NC2H4OH) comprised of a 1:2 molar ratio mixture of choline chloride Cl (ChCl), and ethylene glycol (EG)—and imidazolium-based ILs, such as C4mimCl, using electrochemical techniques, such as cyclic voltammetry, anodic linear sweep voltammetry, and chronopotentiometry.To investigate the electrochemical dissolution mechanism, electrochemical impedance spectroscopy (EIS) was used. In addition to spectroscopic techniques, for instance, UV-visible spectroscopy, microscopic techniques, such as atomic force microscopy (AFM), were used. The significant industrial importance of metallic copper has motivated several research groups to deal with such an invaluable metal. It was confirmed that the speciation of dissolved copper from the bulk phase at the interface region is [CuCl3]− and [CuCl4]2− in such chloride-rich media, and the EG determine the structure of the interfacial region in the electrochemical dissolution process. A super-saturated solution was produced at the electrode/solution interface and CuCl2 was deposited on the metal surface.

scholarly journals Novel Deep Eutectic Solvent Based on Levulinic Acid and 1,4-Butanediol as an Extraction Media for Bioactive Alkaloid Rutaecarpine

Processes ◽  
2019 ◽  
Vol 7 (3) ◽  
pp. 171 ◽  
Author(s):  
Yue-Yue Si ◽  
Shi-Wei Sun ◽  
Kun Liu ◽  
Yang Liu ◽  
Hai-Lin Shi ◽  
...  
Keyword(s):  
Levulinic Acid ◽  
Extraction Efficiency ◽  
Choline Chloride ◽  
Extraction Procedure ◽  
Deep Eutectic Solvent ◽  
Supermolecular Structure ◽  
Molar Ratio ◽  
Resonance Spectroscopy ◽  
Extraction Temperature ◽  
Unripe Fruits

Deep eutectic solvents (DESs) are increasingly receiving interest as a new type of green and sustainable alternative to hazardous organic solvents. In this work, a novel DES based on levulinic acid (La) and 1,4-butanediol (Buta) as an extraction media was developed for extracting the bioactive alkaloid rutaecarpine from the unripe fruits of Tetradium ruticarpum. 24 different DESs consisting of choline chloride, betaine, sugar alcohols, organic acids, amides, and sugars were prepared and tailored to test their extraction efficiency. After initial screening, a hydrophilic DES composed of La and Buta with 1:0.5 molar ratio containing 25% water was tailored for the highest extraction efficiency, followed by the optimizations of molar ratio and water content. The interaction between the molecules of La-Buta DES was investigated by nuclear magnetic resonance spectroscopy in order to confirm its deep eutectic supermolecular structure feature. The extraction conditions were optimized by single-factor experiments, including extraction temperature, extraction time, and solid-liquid ratio. The developed La-Buta DES extraction procedure was successfully applied for the analysis of rutaecarpine in Chinese patent medicines containing the unripe fruits of T. ruticarpum. The excellent property of La-Buta DES indicated its potential as a promising green solvent instead of conventional organic solvent for the extraction of rutaecarpine from the unripe fruits of T. ruticarpum, and that it can used as a sustainable and safe extraction media for other applications.

Sign in / Sign up

Export Citation Format

Share Document