Seismic performance of viscoelastically damped structures at different ambient temperatures

2020 ◽  
pp. 107754632096693
Author(s):  
Jun Dai ◽  
Zhao-Dong Xu ◽  
Pan-Pan Gai ◽  
Xiao Yan
Keyword(s):  
Ambient Temperature ◽  
Temperature Effect ◽  
Seismic Performance ◽  
Structural Parameters ◽  
Damping Ratio ◽  
Historical Earthquakes ◽  
Seismic Evaluation ◽  
Viscoelastic Damper ◽  
Ambient Temperatures ◽  
Seismic Displacement

Experimental results show that mechanical behaviors of viscoelastic dampers are greatly affected by ambient temperature. Neglecting the ambient temperature effect will lead to an inaccurate seismic evaluation on viscoelastically damped structures. This study investigates the ambient temperature effect on the seismic performance of viscoelastically damped structures. An efficient algorithm is proposed to solve the seismic response of viscoelastically damped structures at different ambient temperatures based on the time–temperature correspondence. Numerical simulations of a ten-story viscoelastically damped steel frame under historical earthquakes are presented to illustrate the ambient temperature effect on the seismic performance. The results show that the natural frequency decreases with the increase in ambient temperature, whereas the damping ratio change with ambient temperature greatly depends on the viscoelastic damper properties. The seismic displacement reduction, in general, decreases with the increase in ambient temperature. The seismic acceleration reduction with ambient temperature is affected by the viscoelastic damper properties, structural parameters, and earthquakes together.

Prozessdynamik und Maschinentemperatur*/Process dynamics and machine temperature - Effect of the machine temperature on the dynamic characteristics of machine tools

2016 ◽  
Vol 106 (07-08) ◽  
pp. 506-511
Author(s):  
J. Baumann ◽  
R. Hense ◽  
P. Wiederkehr
Keyword(s):  
Ambient Temperature ◽  
Temperature Effect ◽  
Dynamic Characteristics ◽  
Machine Tools ◽  
Process Stability ◽  
Ambient Temperatures ◽  
Process Dynamics ◽  
Simulation Techniques ◽  
Thermal Influence

Die erreichbare Genauigkeit von Werkzeugmaschinen hängt unter anderem von den Bedingungen am Aufstellort ab, wobei die Temperatur aufgrund ihres Jahres- und Tagesgangs sowie weiterer externer und interner Wärmequellen eine besonders wichtige Rolle spielt. Das gilt auch für die dynamischen Eigenschaften der Werkzeugmaschinen und deren Auswirkungen auf den Prozess. Dies ist bei der Simulation von Maschinenschwingungen zu berücksichtigen.   Facing the rising number of exported machine tools supplied by German manufacturers, the influence of the ambient temperature on process results becomes more variant, less predictable and moderate, and thus a constructive task and scientific matter. While the thermal influence on the process accuracy is extensively investigated, this work takes a closer look on the achievable process stability at different ambient temperatures, using modern measurement and simulation techniques.

scholarly journals Influence of Ambient Temperature on Radiative and Convective Heat Dissipation Ratio in Polymer Heat Sinks

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2286
Author(s):  
Jan Kominek ◽  
Martin Zachar ◽  
Michal Guzej ◽  
Erik Bartuli ◽  
Petr Kotrbacek
Keyword(s):  
Heat Transfer ◽  
Ambient Temperature ◽  
Convective Heat ◽  
Heat Dissipation ◽  
High Surface ◽  
Heat Sinks ◽  
Fourth Power ◽  
Molding Process ◽  
Ambient Temperatures ◽  
University Of Technology

Miniaturization of electronic devices leads to new heat dissipation challenges and traditional cooling methods need to be replaced by new better ones. Polymer heat sinks may, thanks to their unique properties, replace standardly used heat sink materials in certain applications, especially in applications with high ambient temperature. Polymers natively dispose of high surface emissivity in comparison with glossy metals. This high emissivity allows a larger amount of heat to be dissipated to the ambient with the fourth power of its absolute surface temperature. This paper shows the change in radiative and convective heat transfer from polymer heat sinks used in different ambient temperatures. Furthermore, the observed polymer heat sinks have differently oriented graphite filler caused by their molding process differences, therefore their thermal conductivity anisotropies and overall cooling efficiencies also differ. Furthermore, it is also shown that a high radiative heat transfer leads to minimizing these cooling efficiency differences between these polymer heat sinks of the same geometry. The measurements were conducted at HEATLAB, Brno University of Technology.

scholarly journals Insufficient Stability of Clavulanic Acid in Widely Used Child-Appropriate Formulations

Antibiotics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 225
Author(s):  
Ines Mack ◽  
Mike Sharland ◽  
Janneke M. Brussee ◽  
Sophia Rehm ◽  
Katharina Rentsch ◽  
...  
Keyword(s):  
Ambient Temperature ◽  
Clavulanic Acid ◽  
Storage Conditions ◽  
Essential Medicines ◽  
Active Components ◽  
Middle Income ◽  
Ambient Temperatures ◽  
Essential Medicines List ◽  
Dispersible Tablets ◽  
The Stability

Amoxicillin-clavulanic acid (AMC) belongs to the WHO Essential Medicines List for children, but for optimal antimicrobial effectiveness, reconstituted dry powder suspensions need to be stored in a refrigerated environment. Many patients in low- and middle-income countries who are sold AMC suspensions would be expected not to keep to the specified storage conditions. We aimed to assess the stability of both ingredients in liquid formulations and dispersible tablets, combined with nationally representative data on access to appropriate storage. Degradation of amoxicillin (AMX) and clavulanic-acid (CLA) was measured in suspensions and dispersible tablets commercially available in Switzerland at different ambient temperatures (8 °C vs. 28 °C over 7 days, and 23 °C vs. 28 °C over 24 h, respectively). Data on access to refrigeration and electricity were assessed from the USAID-funded Demographic and Health Survey program. In suspensions, CLA degraded to a maximum of 12.9% (95% CI −55.7%, +29.9%) at 8°C and 72.3% (95% CI −82.8%, −61.8%) at a 28 °C ambient temperature during an observation period of 7 days. Dispersible tablets were observed during 24 h and CLA degraded to 15.4% (95% CI −51.9%, +21.2%) at 23 °C and 21.7% (−28.2%, −15.1%) at a 28 °C ambient temperature. There is relevant degradation of CLA in suspensions during a 7-day course. To overcome the stability challenges for all active components, durable child-appropriate formulations are needed. Until then, prescribers of AMC suspensions or pharmacists who sell the drug need to create awareness for the importance of proper storage conditions regarding effectiveness of both antibiotics and this recommendation should be reflected in the WHO Essential Medicines List for children.

Ambient temperature effects on physiological traits of white-tailed deer

1975 ◽  
Vol 53 (6) ◽  
pp. 679-685 ◽  
Author(s):  
J. B. Holter ◽  
W. E. Urban Jr. ◽  
H. H. Hayes ◽  
H. Silver ◽  
H. R. Skutt
Keyword(s):  
Heart Rate ◽  
Body Temperature ◽  
Energy Expenditure ◽  
Ambient Temperature ◽  
Temperature Effects ◽  
Temperature Changes ◽  
Wind Chill ◽  
Ambient Temperatures ◽  
Energy Equilibrium ◽  
Body Energy

Six adult white-tailed deer (Odocoileus virginianus borealis) were exposed to 165 periods of 12 consecutive hours of controlled constant ambient temperature in an indirect respiration calorimeter. Temperatures among periods varied from 38 to 0 (summer) or to −20C (fall, winter, spring). Traits measured were energy expenditure (metabolic rate), proportion of time spent standing, heart rate, and body temperature, the latter two using telemetry. The deer used body posture extensively as a means of maintaining body energy equilibrium. Energy expenditure was increased at low ambient temperature to combat cold and to maintain relatively constant body temperature. Changes in heart rate paralleled changes in energy expenditure. In a limited number of comparisons, slight wind chill was combatted through behavioral means with no effect on energy expenditure. The reaction of deer to varying ambient temperatures was not the same in all seasons of the year.

Change in the Properties of a Lead-acid Battery Depending on the Cycling Speed and the Ambient Temperature

2021 ◽  
Vol 105 (1) ◽  
pp. 119-134
Author(s):  
Jana Zimáková ◽  
Petr Baca ◽  
Martin Langer ◽  
Tomáš Binar
Keyword(s):  
Ambient Temperature ◽  
High Temperatures ◽  
Room Temperature ◽  
Lead Acid Battery ◽  
Ambient Temperatures ◽  
Lead Acid Batteries ◽  
Temperature Dependences ◽  
Cycling Speed ◽  
Lead Acid

This work deals with lead-acid batteries, their properties and individual types that are available on the market. The temperature dependences of the battery parameters at different ambient temperatures and at different discharging and charging modes are measured. 6 batteries are tested at different charging currents, which provides information about their behavior both during discharge and at the time of charging. During the experiments, testing is not only performed at room temperature, but the batteries are also exposed to high temperatures up to 75 °C.

Effect of Changes in Ambient Temperature on Spontaneous Activity, Food Intake and Body Weight of Goldthioglucose-Obese and Nonobese Mice

1957 ◽  
Vol 188 (3) ◽  
pp. 435-438 ◽  
Author(s):  
M. J. Fregly ◽  
N. B. Marshall ◽  
J. Mayer
Keyword(s):  
Body Weight ◽  
Food Intake ◽  
Ambient Temperature ◽  
The Body ◽  
Lower Body ◽  
Obese Mice ◽  
Ambient Temperatures ◽  
Exposure To Cold ◽  
Running Activity ◽  
Body Weights

Goldthioglucose-obese mice cannot adjust their food intake to meet the increased energy requirements due to cold. At all ambient temperatures above 15°C the spontaneous running activity of these animals is less than that observed for nonobese controls. Activity of obese mice is maximal at 19°C and minimal at 15°C or lower. Body weights decrease during exposure to cold. In contrast to that of obese mice, running activity of nonobese controls is maximal at an ambient temperature of 25°C but nearly ceases at 15°C or lower. The food intake of these animals increases in the cold and remains elevated even at temperatures at which activity decreases. The body weight of nonobese controls is either maintained constant or increases during exposure to cold air.

Effect of ambient temperature on protein breakdown during prolonged exercise

1988 ◽  
Vol 64 (2) ◽  
pp. 550-555 ◽  
Author(s):  
D. G. Dolny ◽  
P. W. Lemon
Keyword(s):  
Ambient Temperature ◽  
Prolonged Exercise ◽  
Respiratory Exchange Ratio ◽  
Protein Breakdown ◽  
Protein Utilization ◽  
Post Exercise ◽  
Ambient Temperatures ◽  
Environmental Temperatures ◽  
Male Subjects ◽  
H Protein

Male subjects (n = 8) cycled for 90 min in 5, 20, and 30 degrees C environments. Rectal (Tre), chest, and thigh temperatures, O2 consumption (VO2), respiratory exchange ratio (R), and venous concentrations of glucose, free fatty acids (FFA), urea N, lactic acid (LA), norepinephrine (NE), epinephrine (E), and cortisol (C) were measured before, during, and after exercise. Urea N excretion was measured in 72 h of nonexercise, in 72 h of exercise (exercise day + 2 post-exercise days) urine samples, and in exercise sweat. Calculated 72-h protein utilization (means +/- SE) was significantly greater (P less than 0.05) for the 5 (86.9 +/- 27.1 g) and 20 (82.9 +/- 22.7 g) compared with 30 degrees C (34.01 +/- 19.1 g) trial. Regardless of ambient temperature exercise increased the venous concentration of C, E, and NE. These catabolic hormones were greatest in 5, lowest in 20, and intermediate in 30 degrees C. Exercise Tre and VO2 were greatest in the 30 degrees C environment. Venous FFA concentration was significantly higher and R significantly lower in 5 vs. 20 or 30 degrees C, and venous LA concentration was significantly greater in 30 vs. 20 or 5 degrees C. Although these results indicate that exercise protein breakdown is affected by ambient temperatures, the mechanism of action is not due solely to circulating NE, E, and C. Differences in venous FFA and LA across environmental temperatures suggest that alterations in carbohydrate and fat metabolism may have contributed to the observed variable protein utilization.

Sign in / Sign up

Export Citation Format

Share Document