Influence of imperfections on the stiffness of regular scaffold structures

Author(s):  
Ainhoa Martinez Ormaetxea ◽  
Andreas Öchsner

The manufacturing process of bone scaffold structures has an important influence on the final mechanical strength of the structure. When the structures are not produced properly, i.e. have imperfections such as missing parts or slightly displaced joints, they lose some of their mechanical properties. The aim of this study was to see how different types of damage affect the structures and also if their effects are equal when the structure is subjected to different load conditions. The change of the mechanical behavior was determined using the commercial finite element software MSC Marc Mentat. In turn, the damage was introduced by manipulating the structure’s files (ASCII data files) using the programming language Fortran. Apart from the numerical simulations, experimental testing was also performed to verify the numerical results. In the frame of this study, useful information for further research is provided.

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4145
Author(s):  
He Xue ◽  
Zheng Wang ◽  
Shuai Wang ◽  
Jinxuan He ◽  
Hongliang Yang

Dissimilar metal welded joints (DMWJs) possess significant localized mechanical heterogeneity. Using finite element software ABAQUS with the User-defined Material (UMAT) subroutine, this study proposed a constitutive equation that may be used to express the heterogeneous mechanical properties of the heat-affected and fusion zones at the interfaces in DMWJs. By eliminating sudden stress changes at the material interfaces, the proposed approach provides a more realistic and accurate characterization of the mechanical heterogeneity in the local regions of DMWJs than existing methods. As such, the proposed approach enables the structural integrity of DMWJs to be analyzed in greater detail.


2017 ◽  
Vol 730 ◽  
pp. 548-553
Author(s):  
Jing Ge ◽  
Hao Jiang ◽  
Zhen Yu Sun ◽  
Guo Jun Yu ◽  
Bo Su ◽  
...  

In this paper, we establish the mechanical property analysis of Single-walled Carbon Nanotubes (SWCNTs) modified beam element model based on the molecular structural mechanics method. Then we study the mechanical properties of their radial direction characteristics using the finite element software Abaqus. The model simulated the different bending stiffness with rectangular section beam elements C-C chemical force field. When the graphene curled into arbitrary chirality of SWCNTs spatial structure, the adjacent beam position will change the moment of inertia of the section of the beam. Compared with the original beam element model and the calculation results, we found that the established model largely reduced the overestimate of the original model of mechanical properties on the radial direction of the SWCNTs. At the same time, compared with other methods available in the literature results and the experimental data, the results can be in good agreement.


2018 ◽  
Vol 3 (1) ◽  
pp. 13-20
Author(s):  
Dávid Huri

Automotive rubber products are subjected to large deformations during working conditions, they often contact with other parts and they show highly nonlinear material behavior. Using finite element software for complex analysis of rubber parts can be a good way, although it has to contain special modules. Different types of rubber materials require the curve fitting possibility and the wide range choice of the material models. It is also important to be able to describe the viscoelastic property and the hysteresis. The remeshing possibility can be a useful tool for large deformation and the working circumstances require the contact and self contact ability as well. This article compares some types of the finite element software available on the market based on the above mentioned features.


Metals ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 1165 ◽  
Author(s):  
Hannes Fröck ◽  
Lukas Vincent Kappis ◽  
Michael Reich ◽  
Olaf Kessler

Age hardening aluminium alloys obtain their strength by forming precipitates. This precipitation-hardened state is often the initial condition for short-term heat treatments, like welding processes or local laser heat treatment to produce tailored heat-treated profiles (THTP). During these heat treatments, the strength-increasing precipitates are dissolved depending on the maximum temperature and the material is softened in these areas. Depending on the temperature path, the mechanical properties differ between heating and cooling at the same temperature. To model this behavior, a phenomenological material model was developed based on the dissolution characteristics and experimental flow curves were developed depending on the current temperature and the maximum temperature. The dissolution characteristics were analyzed by calorimetry. The mechanical properties at different temperatures and peak temperatures were recorded by thermomechanical analysis. The usual phase transformation equations in the Finite Element Method (FEM) code, which were developed for phase transformation in steels, were used to develop a phenomenological model for the mechanical properties as a function of the relevant heat treatment parameters. This material model was implemented for aluminium alloy 6060 T4 in the finite element software LS-DYNA (Livermore Software Technology Corporation).


Author(s):  
John Martin

The pilger process is a cold-worked mechanical process that combines the elements of extrusion, rolling, and upsetting for the formation of thin-walled tubes. This complex manufacturing process relies on the results of trial and error testing programs, experimental parameter sensitivity studies, and prototypical applications to advance the technology. This finite element modelling effort describes the methods, models, and assumptions used to assess the process parameters used to manufacture thin-walled tubing. The modelling technique breaks down the manufacturing process into smaller computer generated models representing fundamental process functions. Each of these models is linked with the overall process simulation. Simplified assumptions are identified and supporting justifications provided. This work represents proof of principle modelling techniques, using large deformation, large strain, finite element software. These modelling techniques can be extended to more extensive parameter studies evaluating the effects of pilger process parameter changes on final tube stress and strain states and their relationship to defect formation/propagation. Sensitivity studies on input variables and the process parameters associated with one pass of the pilger process are also included. The modelling techniques have been extended to parameter studies evaluating the effects of pilger process parameter changes on tube stress and strain states and their relationship to defect formation. Eventually a complex qualified 3-D model will provide more accurate results for process evaluation purposes. However, the trends and results reported are judged adequate for examining process trends and parameter variability.


2012 ◽  
Vol 622-623 ◽  
pp. 1140-1142
Author(s):  
Li Mei Wu ◽  
Yong Zhao Li ◽  
Yan Rong Wang ◽  
Fei Yang

Taking taper-lock Connection in Wind Turbine Spindle as research object, the paper analyzes the relativity of structural sizes and builds the parametric structural model by means of a way APDL. By using the non-liner finite element software ANSYS, the stress of taper-lock on the limit load conditions is analyzed, then contact stress and strain of the planet carrier and spindle are discussed. This is useful to the choice of assembly condition during taper-lock, planet carrier and spindle and providing theoretical data.


Author(s):  
Alessandro Russo ◽  
Silvia Panseri ◽  
Tatiana Shelyakova ◽  
Monica Sandri ◽  
Chiara Dionigi ◽  
...  

Diaphyseal bone defect represents a significant problem for orthopaedic surgeons and patients. In order to improve and fasten bone regenerating process we implanted HA biodegradable magnetized scaffolds in a large animal model critical bone defect. A critical long bone defect was created in 6 sheep metatarsus diaphysis; then we implanted a novel porous ceramic composite scaffold (20.0 mm in length; 6.00 mm inner diameter and 17.00 mm outer diameter), made of Hydroxyapatite that incorporates magnetite (HA/Mgn 90/10), proximally fixated by two small cylindrical permanent parylene coated NdFeB magnets (one 6.00 mm diameter magnetic rod firmly incorporated into the scaffold and one 8.00 mm diameter magnetic rods fitted into proximal medullary canal, both 10.00 mm long); to give stability to the complex bone-scaffold-bone, screws and plate was used as a bridge. Scaffolds biocompatibility was previously assessed in vitro using human osteoblast-like cells. Magnetic forces through scaffold were calculated by finite element software (COMSOL Multiphysics, AC/DC Model). One week after surgery, magnetic nanoparticles functionalized with vascular endothelial growth factor (VEGF) were injected at the mid portion of the scaffold using a cutaneous marker positioned during surgery as reference point. After sixteen weeks, sheep were sacrificed to analyze metatarsi. Macroscopical, radiological and microCT examinations were performed. Macroscopical examination shows bone tissue formation inside scaffold pores and with complete coverage of scaffolds, in particular at magnetized bone-scaffold interface. X-rays show a good integration of the scaffold with a good healing process of critical bone defect, and without scaffolds mobilization. These datas were confirmed by the microCT that shown new formation of bone inside the scaffolds, in particular at magnetized bone-scaffold interface. These preliminary results lead our research to exploiting magnetic forces to stimulate bone formation, as attested in both in vitro and in vivo models and to improve fixation at bone scaffold interface, as calculated by finite element software, and moreover to guide targeted drug delivery without functionalized magnetic nanoparticles dissemination in all body. Histological analysis will be performed to confirm and quantify bone tissue regeneration at both interfaces.


2015 ◽  
Vol 1089 ◽  
pp. 299-302
Author(s):  
Lan Xiang Chen ◽  
De Shen Zhao ◽  
Lei Liu

To analyze the mechanical properties of steel tube filled with steel-reinforced concrete(STSRC), the mechanical models and some related problems of STSRC under different loading ways are proposed for the analysis on the base of finite element software: the concrete plastic damage constitutive model, the contact between steel and the treatment of boundary condition, etc. There are three types of specimen for analysis: short column, long column and pure bending beam. The results indicate that the mechanical models and the relevant technical analysis of STSRC are reasonable, and are beneficial to convergence. The discussed methods can provide a reference for the scholars to study on other composite steel-concrete structures.


2011 ◽  
Vol 243-249 ◽  
pp. 294-297
Author(s):  
Rui Tao Zhu

Utilizing general finite element software ANSYS, the finite element computing model of the steel spatial tubular joint is built, which is used to analyze the mechanical properties under dead loads through changing its design parameters. According to the obtained and compared consequences, the different design parameters including stiffening ring thickness, cross-shaped ribbed plate thickness and stiffening ring length exert different influence on ultimate bearing capacity of the steel spatial tubular joint. Specifically, the ultimate bearing capacity under dead loads is affected by setting stiffening ring and changing cross-shaped ribbed plate thickness significantly. In contrast, if the thickness and length of stiffening ring are changed, the impact is insignificant. The results and conclusion can provide reference which is useful to optimize the design of steel spatial tubular joint in such category.


Sign in / Sign up

Export Citation Format

Share Document