Coastal and offshore provinces of Timor-Leste — Geophysics exploration and drilling

2020 ◽  
Vol 39 (8) ◽  
pp. 543-550
Author(s):  
Roberto Fainstein ◽  
Juvêncio De Deus Correia do Rosário ◽  
Helio Casimiro Guterres ◽  
Rui Pena dos Reis ◽  
Luis Teófilo da Costa
Keyword(s):  
Continental Margin ◽  
Accretionary Prism ◽  
Stratigraphic Correlation ◽  
Accretionary Wedge ◽  
Northern Coast ◽  
Potential Field Data ◽  
The North ◽  
Banda Arc ◽  
Timor Leste ◽  
Well Data

Regional geophysics research provides for prospect assessment of Timor-Leste, part of the Southeast Asia Archipelago in a region embracing the Banda Arc, Timor Island, and the northwest Australia Gondwana continental margin edge. Timor Island is a microcontinent with several distinct tectonic provinces that developed initially by rifting and drifting away from the Australian Plate. A compressive convergence began in the Miocene whereby the continental edge of the large craton collided with the microcontinent, forming a subduction zone under the island. The bulk of Timor Island consists of a complex mélange of Tertiary, Cretaceous, Jurassic, Triassic, Permian, and volcanic features over a basal Gondwana craton. Toward the north, the offshore consists of a Tertiary minibasin facing the Banda Arc Archipelago, with volcanics interspersed onshore with the basal Gondwana pre-Permian. A prominent central overthrust nappe of Jurassic and younger layers makes up the mountains of Timor-Leste, terminating south against an accretionary wedge formed by this ongoing collision of Timor and Australia. The northern coast of the island is part of the Indonesian back arc, whereas the southern littoral onshore plus shallow waters are part of the accretionary prism. Deepwater provinces embrace the Timor Trough and the slope of the Australian continental margin being the most prospective region of Timor-Leste. Overall crust and mantle tectonic structuring of Timor-Leste is interpreted from seismic and potential field data, focusing mostly on its southern offshore geology where hydrocarbon prospectivity has been established with interpretation of regional seismic data and analyses of gravity, magnetic, and earthquake data. Well data tied to seismic provides focal points for stratigraphic correlation. Although all the known producing hydrocarbon reservoirs of the offshore are Jurassic sands, interpretation of Permian and Triassic stratigraphy provides knowledge for future prospect drilling risk assessment, both onshore and offshore.

The crustal structure in the transition from the on land fold-and-thrust belt to the offshore accretionary prism in the Taiwan arc-continent collision

2020 ◽  
Author(s):  
Joaquina Alvarez-Marrón ◽  
Dennis Brown ◽  
Juan Alcalde ◽  
Ignacio Marzán ◽  
Hao Kuo-Chen
Keyword(s):  
Continental Margin ◽  
Seismic Tomography ◽  
Accretionary Prism ◽  
Crustal Thickening ◽  
Accretionary Wedge ◽  
Thrust Belt ◽  
Deformation Front ◽  
Coast Line ◽  
Transition Area ◽  
Fold And Thrust Belt

<p>The region of Taiwan is undergoing active, oblique arc-continent colision between the Luzon Arc on the Philippine Sea Plate and the continental margin of Eurasia. The Fold-and-Thrust Belt (FTB) in Taiwan passes southwards into a submarine accretionary wedge at the Manila subduction zone. The aim of this contribution is to examine how an on land FTB changes into a marine accretionary prism in the context of an oblique arc-continent collision. The Miocene pre-orogenic sediments of the continental margin are widespread in the FTB ca. 23° latitude while the offshore wedge is built up dominantly by Pliocene to recent syn-orogenic sediments. In the transition area from the marine accretionary wedge ca. 21° latitude to the on land FTB, the thrust wedge is climbing up the slope of the Eurasian continental margin. The deformation front is at sea floor depth of ca. 4 km in the south to less than 1 km as it reaches the coast line. Here we use the island surface geology, marine reflection seismic profiles, and seismic tomography models to construct contour maps of the basal thrust and the depth to the Moho across a transition area from near 23° to near 21° latitude. In this zone, the deformation front draws a convex curvature as the wedge widens from ca. 50 in the north and south, to more than 130 km near 22° latitude. The basal thrust surface shows a scoop shape as its dip changes from southeast near the coast line to east southward. The basal thrust reaches over 7 km deep beneath the rear of the FTB before ramping into de basement and merging into the Chaochou fault at 10 km depth. Offshore, it shows a gentler dip from 7 km to c. 10 km depth before getting steeper towards the east below the Hengchung Ridge. The basal cuts laterally along-strike through the margin’s sedimentary cover to incorporate thicker Miocene pre-orogenic sediments onto its hanging wall as it passes from the offshore wedge to the on land FTB.</p><p>In the offshore area, the Moho (we use a Vp proxy of 7.5 km/s extracted from the seismic tomography) shallows southeastward, from near 25 km depth below the shelf slope break to less than 17 km depth below the offshore wedge near 21.5° latitude before it starts to deep east towards beneath the Taiwan coast. The Moho dips northeast from near 25 km depth below the coast near Kaohsiung, to near 40 depth below the rear of the FTB at 23.5°, latitude. This complex morphology of the Moho may be related to the changes in crustal thickness and the obliquity of the collision. Because of this, crustal thickening is less pronounced beneath southern Taiwan where the thinner part of the margin is colliding with the arc.</p><p>This research is part of project PGC2018-094227-B-I00 funded by the Spanish Research Agency from the Ministry of Science Innovation and Universities of Spain.</p>

U–Pb geochronology of detrital zircons from a continental margin assemblage in the northern Coast Mountains, southeastern Alaska

1991 ◽  
Vol 28 (8) ◽  
pp. 1285-1300 ◽  
Author(s):  
George E. Gehrels ◽  
William C. McClelland ◽  
Scott D. Samson ◽  
P. Jonathan Patchett
Keyword(s):  
Continental Margin ◽  
North American ◽  
Detrital Zircons ◽  
Northern Coast ◽  
Coast Mountains ◽  
Metasedimentary Rocks ◽  
The North ◽  
Upper Proterozoic ◽  
Two Samples ◽  
Cordilleran Margin

Metamorphic rocks within and west of the northern Coast Mountains in southeastern Alaska consist of an Upper Proterozoic(?) to upper Paleozoic continental margin assemblage that we interpret to belong to the Yukon-Tanana terrane. U–Pb geochronologic analyses of single detrital zircon grains from four samples of quartzite suggest that the zircons were shed from source regions containing rocks of ~495 Ma, ~750 Ma, 1.05–1.40 Ga, 1.75–2.00 Ga, ~2.3 Ga, 2.5–2.7 Ga, and ~3.0 Ga. Multigrain fractions from two samples yield upper intercepts between 2.0 and 2.3 Ga, but the scarcity of single grains of similar age suggests that these fractions comprise a mixture of < 2.0 and > 2.3 Ga grains. Zircons in these rocks generally overlap in age with (i) detrital zircons in metasedimentary rocks of the Yukon–Tanana terrane in eastern Alaska and Yukon, (ii) detrital zircons in strata of the Cordilleran miogeocline, and (iii) plutonic and gneissic rocks that intrude or are overlain by miogeoclinal strata. In addition, the pre-1.7 Ga grains overlap in age with dated crystalline rocks of the western Canadian Shield. These similarities raise the possibility that metaclastic rocks in the northern Coast Mountains accumulated in proximity to western North America. The younger zircon populations were likely shed from mid-Proterozoic to early Paleozoic igneous rocks that now occur locally (but may have been widespread) along the Cordilleran margin. Recognition of a continental margin assemblage of possible North American affinity in the Coast Mountains raises the possibility that some arc-type and oceanic terranes inboard of the Coast Mountains may be large klippen that have been thrust over the North American margin.

scholarly journals Timor Collision Front Segmentation Reveals Potential for Great Earthquakes in the Western Outer Banda Arc, Eastern Indonesia

2021 ◽  
Vol 9 ◽  
Author(s):  
Aurélie Coudurier-Curveur ◽  
Satish C. Singh ◽  
Ian Deighton
Keyword(s):  
Active Faults ◽  
Accretionary Prism ◽  
Historical Seismicity ◽  
Normal Faults ◽  
Seismic Reflection Data ◽  
Spatially Correlated ◽  
Eastern Indonesia ◽  
The North ◽  
Reflection Data ◽  
Banda Arc

In Eastern Indonesia, the western Outer Banda arc accommodates a part of the oblique Australian margin collision with Eurasia along the Timor Trough. Yet, unlike the Wetar and Alor thrusts of the Inner Banda arc in the north and the adjacent Java subduction zone in the west, both recent and historical seismicity along the Timor Trough are extremely low. This long-term seismic quiescence questions whether the Banda Arc collision front along the Timor Trough is actually fully locked or simply aseismic and raises major concerns on the possible occurrence of large magnitude and tsunamigenic earthquakes in this vulnerable and densely populated region. Here, we jointly analyze multibeam bathymetry and 2D seismic reflection data acquired along the Timor Trough to characterize the location, nature, and geometry of active faults. Discontinuous narrow folds forming a young accretionary prism at the base of the Timor wedge and spatially correlated outcropping normal faults on the bending northwest Australian shelf reveal two concurrent contrasting styles of deformation: underthrusting and frontal accretion. We find that those tectonic regimes and their associated seismic behaviors depend on 1) the thickness of the incoming and underthrusting Cenozoic sedimentary sequence, 2) the vergence of inherited normal faults developed within the continental shelf, and 3) the depth of the décollement beneath the Timor wedge. Based on the along-strike, interchanging distinct deformation style, we identify the mechanical and seismic segmentation along the Banda arc collision front and discuss the implications for earthquake and tsunami hazards along the western Outer Banda arc region.

The 25 October, 2018 Zakynthos (Greece) earthquake: seismic activity at the transition between a transform fault and a subduction zone.

2020 ◽  
Author(s):  
P Papadimitriou ◽  
V Kapetanidis ◽  
A Karakonstantis ◽  
I Spingos ◽  
K Pavlou ◽  
...  
Keyword(s):  
Spatial Clustering ◽  
Accretionary Prism ◽  
Velocity Model ◽  
Strike Slip ◽  
Double Difference ◽  
Strain Partitioning ◽  
Transform Fault ◽  
Fault Plane Solutions ◽  
The North ◽  
Waveform Modelling

Summary The properties of the Mw = 6.7 earthquake that took place on 25 October 2018, 22:54:51 UTC, ∼50 km SW of the Zakynthos Island, Greece, are thoroughly examined. The main rupture occurred on a dextral strike-slip, low-angle, east-dipping fault at a depth of 12 km, as determined by teleseismic waveform modelling. Over 4000 aftershocks were manually analysed for a period of 158 days. The events were initially located with an optimal 1D velocity model and then relocated with the double-difference method to reveal details of their spatial distribution. The latter spreads in an area spanning 80 km NNW-SSE and ∼55 km WSW-ENE. Certain parts of the aftershock zone present strong spatial clustering, mainly to the north, close to Zakynthos Island, and at the southernmost edge of the sequence. Focal mechanisms were determined for 61 significant aftershocks using regional waveform modelling. The results revealed characteristics similar to the mainshock, with few aftershocks exhibiting strike-slip faulting at steeper dip angles, possibly related to splay faults on the accretionary prism. The slip vectors that correspond to the east-dipping planes are compatible with the long-term plate convergence and with the direction of coseismic displacement on the Zakynthos Island. Fault-plane solutions in the broader study area were inverted for the determination of the regional stress-field. The results revealed a nearly horizontal, SW-NE to E-W-trending S1 and a more variable S3 axis, favouring transpressional tectonics. Spatial clusters at the northern and southern ends of the aftershock zone coincide with the SW extension of sub-vertical along-dip faults of the segmented subducting slab. The mainshock occurred in an area where strike-slip tectonics, related to the Cephalonia Transform Fault and the NW Peloponnese region, gradually converts into reverse faulting at the western edge of the Hellenic subduction. Plausible scenarios for the 2018 Zakynthos earthquake sequence include a rupture on the subduction interface, provided the slab is tilted eastwards in that area, or the reactivation of an older east-dipping thrust as a low-angle strike-slip fault that contributes to strain partitioning.

scholarly journals A new method for correcting temperature log profiles in low-enthalpy plays

2020 ◽  
Vol 8 (1) ◽  
Author(s):  
Sandra Schumacher ◽  
Inga Moeck
Keyword(s):  
Input Parameter ◽  
New Method ◽  
Geothermal Resources ◽  
The North ◽  
Deep Wells ◽  
Thermal Disturbance ◽  
Drilling Operations ◽  
Crucial Information ◽  
Well Data ◽  
Drilling Time

Abstract Temperature logs recorded shortly after drilling operations can be the only temperature information from deep wells. However, these measurements are still influenced by the thermal disturbance caused by drilling and therefore do not represent true rock temperatures. The magnitude of the thermal disturbance is dependent on many factors such as drilling time, logging procedure or mud temperature. However, often old well reports lack this crucial information so that conventional corrections on temperature logs cannot be performed. This impedes the re-evaluation of well data for new exploration purposes, e.g. for geothermal resources. This study presents a new method to correct log temperatures in low-enthalpy play types which only requires a knowledge of the final depth of the well as an input parameter. The method was developed and verified using existing well data from an intracratonic sedimentary basin, the eastern part of the North German Basin. It can be transferred to other basins with little or no adjustment.

Inversion of regional surface-wave spectra for source parameters of aftershocks from the 1992 Petrolia earthquake sequence

1995 ◽  
Vol 85 (3) ◽  
pp. 705-715
Author(s):  
Mark Andrew Tinker ◽  
Susan L. Beck
Keyword(s):  
Surface Wave ◽  
Focal Mechanism ◽  
Source Parameters ◽  
Strike Slip ◽  
Earthquake Sequence ◽  
Fault System ◽  
Accretionary Wedge ◽  
Wave Spectra ◽  
The North ◽  
Gorda Plate

Abstract Regional distance surface waves are used to study the source parameters for moderate-size aftershocks of the 25 April 1992 Petrolia earthquake sequence. The Cascadia subduction zone had been relatively seismically inactive until the onset of the mainshock (Ms = 7.1). This underthrusting event establishes that the southern end of the North America-Gorda plate boundary is seismogenic. It was followed by two separate and distinct large aftershocks (Ms = 6.6 for both) occurring at 07:41 and 11:41 on 26 April, as well as thousands of other small aftershocks. Many of the aftershocks following the second large aftershock had magnitudes in the range of 4.0 to 5.5. Using intermediate-period surface-wave spectra, we estimate focal mechanisms and depths for one foreshock and six of the larger aftershocks (Md = 4.0 to 5.5). These seven events can be separated into two groups based on temporal, spatial, and principal stress orientation characteristics. Within two days of the mainshock, four aftershocks (Md = 4 to 5) occurred within 4 hr of each other that were located offshore and along the Mendocino fault. These four aftershocks comprise one group. They are shallow, thrust events with northeast-trending P axes. We interpret these aftershocks to represent internal compression within the North American accretionary prism as a result of Gorda plate subduction. The other three events compose the second group. The shallow, strike-slip mechanism determined for the 8 March foreshock (Md = 5.3) may reflect the right-lateral strike-slip motion associated with the interaction between the northern terminus of the San Andreas fault system and the eastern terminus of the Mendocino fault. The 10 May aftershock (Md = 4.1), located on the coast and north of the Mendocino triple junction, has a thrust fault focal mechanism. This event is shallow and probably occurred within the accretionary wedge on an imbricate thrust. A normal fault focal mechanism is obtained for the 5 June aftershock (Md = 4.8), located offshore and just north of the Mendocino fault. This event exhibits a large component of normal motion, representing internal failure within a rebounding accretionary wedge. These two aftershocks and the foreshock have dissimilar locations in space and time, but they do share a north-northwest oriented P axis.

Heavy rainfall in the northern coast of Ecuador in the aftermath of El Niño 2015/2016 and its predictability 

2021 ◽  
Author(s):  
Luis E. Pineda ◽  
Juan Changoluisa ◽  
Ángel G. Muñoz
Keyword(s):  
Heavy Rainfall ◽  
Heavy Rain ◽  
Rainfall Anomaly ◽  
Precipitation Event ◽  
Lead Times ◽  
Northern Coast ◽  
Atmospheric Conditions ◽  
The North ◽  
Ensemble Mean ◽  
Rainfall Anomalies

&lt;p&gt;In January 2016, a high precipitation event (HPE) affected the northern coast of Ecuador leading to devastating flooding in the Esmeraldas&amp;#8217; river basin. The HPE appeared in the aftermath of the 2015/2016 El Ni&amp;#241;o as an early onset of heavy rainfalls otherwise expected in the core rainy season (Mar-Apr). Using gauge data, satellite imagery and reanalysis we investigate the daily and &amp;#8216;weather-within-climate&amp;#8217; characteristics of the HPE and its accompanying atmospheric conditions. The convective storms developed into a mesoscale convective complex (MCC) during nighttime on 24&lt;sup&gt;th&lt;/sup&gt; January. The scale size of the heavy rainfall system was about 250 km with a lifecycle lasting 16 hours for the complete storm with 6 hours of convective showers contributing to the HPE. The genesis of the MCC was related to above-normal moisture and orographic lifting driving convective updrafts; the north-south mountain barrier acted as both a channel boosting upslope flow when it moves over hillslopes; and, as a heavy-rain divide for inner valleys. The above normal moisture conditions were favored by cross-time-scale interactions involving the very strong El Ni&amp;#241;o 2015/2016 event, an unusually persistent Madden&amp;#8211;Julian oscillation (MJO) in phases 3 and 6, remotely forced by tropical synoptic scale disturbances. In the dissipation stage, a moderate low-level easterly shear with wind velocity of about 10 m/s moved away the unstable air and the convective pattern disappear on the shore of the Esmeraldas basin.&lt;/p&gt;&lt;p&gt;&amp;#160;&lt;/p&gt;&lt;p&gt;We use ECMWF re-forecast from the Sub-seasonal to Seasonal (S2S) prediction project dataset and satellite observations to investigate the predictability of the HPE. Weekly ensemble-mean rainfall anomaly forecasts computed from raw (uncorrected) S2S reforecast initialized on 31st Dec 2015, 7th, 14th and 21st Jan 2016 are used to assess the occurrence of rainfall anomalies over the region. The reforecast represents consistently, over all lead times, the spatial pattern of the HPE. Also, the ensemble-mean forecast shows positive rainfall anomalies at times scales of 1-3 weeks (0-21 days) at nearly all initialization dates and lead times, predicting this way successfully the timing and amplitude of the highest HPE leading the 25th January flood.&lt;/p&gt;

A Scientometric Study of Foraminiferal Research in Brazil

2021 ◽  
Vol 51 (4) ◽  
pp. 267-285
Author(s):  
Beatriz Lima Vieira ◽  
Letícia Rizzetto Patrocínio ◽  
Douglas Villela de Oliveira Lessa ◽  
Doriedson Ferreira Gomes
Keyword(s):  
Continental Margin ◽  
Generalized Additive Model ◽  
Scientific Literature ◽  
Additive Model ◽  
Scientific Production ◽  
Field Of Study ◽  
The North ◽  
Marine Realm ◽  
Scientometric Study ◽  
Brazilian Science

ABSTRACT Scientometrics is a field of study that involves measuring and analyzing scientific literature and can be a valuable tool to assess and reveal major gaps in national scientific production. Among the major challenges for Brazilian science is the development of research in the extensive national marine realm. This paper provides a scientometric survey of papers involving foraminiferal research in Brazil. The metrics utilized were papers listed in “Capes Portal” and “Scopus” databases up to the year of 2019. A total of 324 papers were found and 177 were selected based upon criteria established. A generalized additive model (GAM) was used to establish a relationship between publications and time. Studies involving foraminifera increased in Brazil from 1952 to 2019. Most studies have been conducted in the southeast region. We identified the need for more research on foraminifera to be carried out in the Brazilian continental margin, especially in the north and northeast regions of the country.

scholarly journals Preliminary results of drift-bottle releases and recoveries in the Western Tropical Atlantic

1967 ◽  
Vol 16 (1) ◽  
pp. 13-22 ◽  
Author(s):  
Ellen F. Luedemann
Keyword(s):  
Surface Current ◽  
Northeastern Brazil ◽  
Brazilian Coast ◽  
Northern Coast ◽  
The North ◽  
Strong Current ◽  
North Brazil ◽  
Equatorial Current ◽  
The Caribbean ◽  
Area North

In February-March 1963, during the Equalant Operation for the ICITA program, 476 drift-bottles were released at the equatorial waters off the northern Brazilian coast (01ºS to 09ºN and 043ºW to 053ºW). Thirty-five, bottles were recovered (7,4%). Those were classed in five groups according to their different velocity ranges and areas of recovery (Trinidad Island; Lesser Antilles; Caribbean and Florida area; north Brazil; northeastern Brazil). The recoveries of bottles released within 300 nm off the northern and northeastern coast of Brazil confirmed a strong current along the north and northeast coast in northwestern direction (South Equatorial Current and branches). In late February-early March the bottles showed maximum velocities of this current (3,6 knots). The region off the northern coast of Brazil, between 05ºN and 09ºN up to 050ºW seems to have been under the influence of an eastward component of the surface current in this same period, while at late March this influence appears to have been weaker. In the region from Trinidad Island to Yucatan Peninsula the current seems to be stronger on the northeastern side of the Caribbean Sea.

Sign in / Sign up

Export Citation Format

Share Document