Morphology of hyaluronidase-sensitive cell coats as seen in the SEM after freeze-drying

1983 ◽  
Vol 62 (1) ◽  
pp. 371-383 ◽  
Author(s):  
J.B. Bard ◽  
W.H. McBride ◽  
A.R. Ross
Keyword(s):  
Exclusion Zone ◽  
Human Embryonic Lung ◽  
Electron Microscopic ◽  
Degree Of Hydration ◽  
Carbon Particles ◽  
Yield Information ◽  
Freeze Dried ◽  
Murine Fibrosarcoma

Many adherent cells in vitro are surrounded by a transparent exclusion zone or halo, several micrometers thick, which red blood cells, bacteria and carbon particles cannot penetrate. This halo is rapidly and specifically removed by hyaluronidase and its high degree of hydration is demonstrated by the fact that, although fixation does not eliminate the halo, solvent dehydration does. This latter observation means that the halo cannot be visualized by conventional electron microscopic techniques. We report here that the exclusion-zone material can, however, be seen in the scanning electron microscope if cells are fixed and frozen rapidly and then freeze-dried. Many cells in cultures from a murine fibrosarcoma or from human embryonic lung treated in this way appear to be covered by a matrix that obscures the microvilli that are visible on critical-point-dried or hyaluronidase-treated, freeze-dried cells. Only where the coat is, for some reason, missing can microvilli be seen on freeze-dried cells. The coat structure varies from amorphous to an assembly of fine fibres approximately 100 nm in diameter and its appearance is very similar to that of small drops of hyaluronic acid (10(−5) micrograms ml-1) treated in the same way. Halo material is fragile and detaches itself from the cell surface within an hour of fixation. These observations suggest that the halo phenomenon reflects only the production of extracellular matrix and its turnover. The fragility of the haloes implies that, if they do exist in vivo, they are unlikely to play any structural role. The results suggest that the technique will yield information on other highly hydrated, unstable structures.

Preparation of cultured astrocytes for x-ray microanalysis

1989 ◽  
Vol 47 ◽  
pp. 988-989
Author(s):  
N.K.R. Smith ◽  
K.E. Hunter ◽  
P. Mobley ◽  
L.P. Felpel
Keyword(s):  
Cultured Cells ◽  
Elemental Content ◽  
Elemental Distribution ◽  
Sprague Dawley ◽  
X Ray ◽  
Cultured Astrocytes ◽  
Freeze Dried ◽  
Ultimate Objective

Electron probe energy dispersive x-ray microanalysis (XRMA) offers a powerful tool for the determination of intracellular elemental content of biological tissue. However, preparation of the tissue specimen , particularly excitable central nervous system (CNS) tissue , for XRMA is rather difficult, as dissection of a sample from the intact organism frequently results in artefacts in elemental distribution. To circumvent the problems inherent in the in vivo preparation, we turned to an in vitro preparation of astrocytes grown in tissue culture. However, preparations of in vitro samples offer a new and unique set of problems. Generally, cultured cells, growing in monolayer, must be harvested by either mechanical or enzymatic procedures, resulting in variable degrees of damage to the cells and compromised intracel1ular elemental distribution. The ultimate objective is to process and analyze unperturbed cells. With the objective of sparing others from some of the same efforts, we are reporting the considerable difficulties we have encountered in attempting to prepare astrocytes for XRMA.Tissue cultures of astrocytes from newborn C57 mice or Sprague Dawley rats were prepared and cultured by standard techniques, usually in T25 flasks, except as noted differently on Cytodex beads or on gelatin. After different preparative procedures, all samples were frozen on brass pins in liquid propane, stored in liquid nitrogen, cryosectioned (0.1 μm), freeze dried, and microanalyzed as previously reported.

Cytological changes induced by platinum-thymine in sarcoma-180 cells: Electron microscopy study

1990 ◽  
Vol 48 (3) ◽  
pp. 290-291
Author(s):  
Gustav Ofosu
Keyword(s):  
Mammalian Cells ◽  
Antitumor Agent ◽  
Microscopy Study ◽  
Electron Microscopy Study ◽  
Limiting Factor ◽  
Sarcoma 180 ◽  
Electron Microscopic ◽  
Cytological Changes

Platinum-thymine has been found to be a potent antitumor agent, which is quite soluble in water, and lack nephrotoxicity as the dose-limiting factor. The drug has been shown to interact with DNA and inhibits DNA, RNA and protein synthesis in mammalian cells in vitro. This investigation was undertaken to elucidate the cytotoxic effects of piatinum-thymine on sarcoma-180 cells in vitro ultrastructurally, Sarcoma-180 tumor bearing mice were treated with intraperitoneal injection of platinum-thymine 40mg/kg. A concentration of 60μg/ml dose of platinum-thymine was used in in vitro experiments. Treatments were at varying time intervals of 3, 7 and 21 days for in vivo experiments, and 30, 60 and 120 min., 6, 12, and 24th in vitro. Controls were not treated with platinum-thymine.Electron microscopic analyses of the treated cells in vivo and in vitro showed drastic cytotoxic effect.

Accumulation of Macromolecular Particles in the Reticuloendothelial System (RES) Mediated by Platelet Aggregation and Disaggregation

1969 ◽  
Vol 22 (03) ◽  
pp. 496-507 ◽  
Author(s):  
W.G van Aken ◽  
J Vreeken
Keyword(s):  
Platelet Aggregation ◽  
Degradation Products ◽  
Reticuloendothelial System ◽  
Caproic Acid ◽  
Carbon Particles ◽  
Carbon Clearance ◽  
Aggregation And Disaggregation ◽  
Platelet Aggregates

SummaryCarbon particles cause platelet aggregation in vitro and in vivo. Prior studies established that substances which modify thrombocyte aggregation also influence the rate at which carbon is cleared from the blood.This study was performed in order to elucidate the mechanism by which the carbon-platelet aggregates specifically accumulate in the RES.Activation of fibrinolysis by urokinase or streptokinase reduced the carbon clearance rate, probably due to generated fibrinogen degradation products (FDP). Isolated FDP decreased the carbon clearance and caused disaggregation of platelets and particles in vitro. Inhibition of fibrinolysis by epsilon-amino-caproic acid (EACA), initially accelerated the disappearance of carbon and caused particle accumulation outside the RES, predominantly in the lungs. It is supposed that platelet aggregation and locally activated fibrinolysis act together in the clearance of particles. In the normal situation the RES with its well known low fibrinolytic activity, becomes the receptor of the particles.

Freeze-Dried Clopidogrel Loaded Lyotropic Liquid Crystal: Box-Behnken Optimization, In-Vitro and In-Vivo Evaluation

2020 ◽  
Vol 17 (3) ◽  
pp. 207-217
Author(s):  
Eman A. Hakeem ◽  
Galal M. El-Mahrouk ◽  
Ghada Abdelbary ◽  
Mahmoud H. Teaima
Keyword(s):  
Statistical Analysis ◽  
Oral Bioavailability ◽  
Quadratic Model ◽  
Lipid Phase ◽  
Individual Response ◽  
In Vivo Evaluation ◽  
Freeze Dried ◽  
Suggested Formula

Background: Clopidogrel (CLP) suffers from extensive first pass metabolism results in a negative impact on its oral systemic bioavailability. Cubosomes are Lyotropic Liquid Crystalline (LLC) nano-systems comprising monoolein, a steric stabilizer and an aqueous system, it considered a promising carrier for different pharmaceutical compounds. Box-Behnken Design (BBD) is an efficient tool for process analysis and optimization skipping forceful treatment combinations. Objective: The study was designed to develop freeze-dried clopidogrel loaded LLC (cubosomes) for enhancement of its oral bioavailability. Methods: A 33 BBD was adopted, the studied independent factors were glyceryl monooleate (GMO lipid phase), Pluronic F127 (PL F127steric stabilizer) and polyvinyl alcohol powder (stabilizer). Particle Size (PS), Polydispersity Index (PDI) and Zeta Potential (ZP) were set as independent response variables. Seventeen formulae were prepared in accordance with the bottom up approach and in-vitro evaluated regarding PS, PDI and ZP. Statistical analysis and optimization were achieved using design expert software®, then the optimum suggested formula was prepared, in-vitro revaluated, freeze-dried with 3% mannitol (cryoprotectant), solid state characterized and finally packed in hard gelatin capsule for comparative in-vitro release and in-vivo evaluation to Plavix®. Results: Results of statistical analysis of each individual response revealed a quadratic model for PS and PDI where a linear model for ZP. The optimum suggested formula with desirability factor equal 0.990 consisting of (200 mg GMO, 78.15 mg PL F127 and 2% PVA). LC/MS/MS study confirmed significant higher C>max, AUC>0-24h and AUC>0-∞ than that of Plavix®. Conclusion: The results confirm the capability of developed carrier to overcome the low oral bioavailability.

scholarly journals Optimizing the Process Design of Oil-in-Water Nanoemulsion for Delivering Poorly Soluble Cannabidiol Oil

Processes ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 1180
Author(s):  
Agnieszka Lewińska
Keyword(s):  
Process Design ◽  
Hacat Keratinocytes ◽  
Degree Of Hydration ◽  
Skin Cell ◽  
Oil In Water ◽  
Poorly Soluble ◽  
Last Stage ◽  
Positive Effect

Process approaches and intensification technological processes are integrated parts of available devices, which have a positive effect on the parameters of the obtained products. Nanoemulsions as delivery carriers are becoming more popular and there is a real need to increase the possibilities of formulation designing and engineering. Therefore, preparations of oil-in-water nanoemulsion with encapsulated cannabidiol (CBD) as oil phase were carried out in two ways: sonication method and two-stage high-pressure homogenization. The provided analysis showed spherical morphology and much larger sizes and polydispersity of nanoemulsions obtained by the sonication approach. The size of nanodroplets was from 216 nm up to 1418 nm for sonication, whereas for homogenization 128–880 nm. Additionally, it was observed that a proportionally higher percentage of surfactin resulted in a higher value of the Zeta potential. The formulations were found to be stable for at least 30 days. The in vitro experiments performed on human skin cell lines (HaCaT keratinocytes and normal dermal NHDF fibroblasts), and in vivo topical tests on probants established the biocompatibility of nanoemulsions with CBD. The last stage exhibits reduced discoloration and a higher degree of hydration by the selected systems with CBD and, thus indicating this nanoformulation as useful in cosmetics applications.

Effects of chelating agents during freeze-drying of boar spermatozoa on DNA fragmentation and on developmental ability in vitro and in vivo after intracytoplasmic sperm head injection

Zygote ◽  
2007 ◽  
Vol 15 (1) ◽  
pp. 15-24 ◽  
Author(s):  
M. Nakai ◽  
N. Kashiwazaki ◽  
A. Takizawa ◽  
N. Maedomari ◽  
M. Ozawa ◽  
...  
Keyword(s):  
Dna Fragmentation ◽  
Freeze Drying ◽  
Chelating Agents ◽  
Sperm Head ◽  
Control Group ◽  
Sperm Dna Fragmentation ◽  
Freeze Dried ◽  
Boar Sperm

SUMMARYSuccessful offspring production after intracytoplasmic injection of freeze-dried sperm has been reported in laboratory animals but not in domesticated livestock, including pigs. The integrity of the DNA in the freeze-dried sperm is reported to affect embryogenesis. Release of endonucleases from the sperm is one of the causes of induction of sperm DNA fragmentation. We examined the effects of chelating agents, which inhibit the activation of such enzymes, on DNA fragmentation in freeze-dried sperm and on the in vitro and in vivo developmental ability of porcine oocytes following boar sperm head injection. Boar ejaculated sperm were sonicated, suspended in buffer supplemented with (1) 50 mM EGTA, (2) 50 mM EDTA, (3) 10 mM EDTA, or (4) no chelating agent and freeze-dried. A fertilization medium (Pig-FM) was used as a control. The rehydrated spermatozoa in each group were then incubated in Pig-FM at room temperature. The rate of DNA fragmentation in the control group, as assessed by the TUNEL method, increased gradually as time after rehydration elapsed (2.8% at 0 min to 12.2% at 180 min). However, the rates in all experimental groups (1–4) did not increase, even at 180 min (0.7–4.1%), which were all significantly lower (p < 0.05) than that of the control group. The rate of blastocyst formation after the injection in the control group (6.0%) was significantly lower (p < 0.05) than those in the 50 mM EGTA (23.1%) and 10 mM EDTA (22.6%) groups incubated for 120–180 min. The average number of blastocyst cells in the 50 mM EGTA group (33.1 cells) was significantly higher (p < 0.05) than that in the 10 mM EDTA group (17.8 cells). Finally, we transferred oocytes from 50 mM EGTA or control groups incubated for 0–60 min into estrous-synchronized recipients. The two recipients of the control oocytes became pregnant and one miscarried two fetuses on day 39.The results suggested that fragmentation of DNA in freeze-dried boar sperm is one of the causes of decreased in vitro developmental ability of injected oocytes to the blastocyst stage. Supplementation with EGTA in a freeze-drying buffer improves this ability.

scholarly journals QUALITY BY DESIGN (QBD) AS A TOOL FOR THE OPTIMIZATION OF INDOMETHACIN FREEZE-DRIED SUBLINGUAL TABLETS: IN VITRO AND IN VIVO EVALUATION

2021 ◽  
pp. 160-171
Author(s):  
MERVAT SHAFIK IBRAHIM ◽  
NIHAL MOHAMED ELMAHDY ELSAYYAD ◽  
ABEER SALAMA ◽  
SHEREEN H. NOSHI
Keyword(s):  
Response Surface ◽  
Quality By Design ◽  
Drug Dissolution ◽  
Disintegration Time ◽  
Optimization Study ◽  
Freeze Dried ◽  
Screening Study ◽  
Wetting Time

Objective: This study aims to prepare and optimize indomethacin freeze-dried sublingual tablets (IND-FDST) by utilizing a quality by design (QbD) approach to achieve rapid drug dissolution and simultaneously bypassing the GIT for better patient tolerability. Methods: A screening study was utilized to determine the most significant factors which the quality attributes, namely disintegration time and % friability. Then an optimization study was conducted using a full response surface design to determine the optimized formula by varying the amount of the matrix-forming polymer (gelatin) and super disintegrant (croscarmellose sodium (CCS)). The variables' effect on the % friability, disintegration time, wetting time, and amount of drug release after 10 min (%Q10) was studied. The optimized formula was tested for compatibility, morphology as well as stability studies under accelerated conditions in addition to the in vivo pharmacodynamics in rats. QbD was adopted by utilizing a screening study to identify the significant formulation factors followed by a response surface optimization study to determine the optimized IND-FDST formulation. Results: Optimized IND-FDST comprised of gelatin/CCS combination in a ratio of 1:1 possessed adequate %friability (0.73±0.03%), disintegration time (25.40±1.21 seconds), wetting time (3.49±0.68 seconds), and % Q10 (100.99±5.29%) as well as good stability under accelerated conditions. IND-FDST also showed significant inhibition of edema, tumour necrosis factor-alpha, and interleukin-6 release in vivo compared to the oral market product by 70%, 42%, and 65%, respectively. Conclusion: QbD presents a successful approach in the optimization of a successful IND-FDST formula that showed superior in vivo and in vitro characteristics.

Effect of particle size on in vitro fermentation of silages differing in dry matter content

1997 ◽  
Vol 1997 ◽  
pp. 197-197
Author(s):  
R. Sanderson ◽  
S.J. Lister ◽  
A. Sargeant ◽  
M.S. Dhanoa
Keyword(s):  
Particle Size ◽  
Dry Matter ◽  
Matter Content ◽  
Dry Matter Content ◽  
In Vitro Fermentation ◽  
Freeze Dried ◽  
Effect Of Particle Size

The objectives of this study were a) to examine the effect of particle size and silage dry matter (DM) content on the rate and pattern of fermentation of fresh silages in vitro as an aid to modelling the in vivo situation and b) to compare the rate and pattern of fermentation of fresh silage samples with those obtained for freeze-dried material.

Electron microscopic studies on the structure of motile primordial germ cells of Xenopus laevis in vitro

Development ◽  
1978 ◽  
Vol 46 (1) ◽  
pp. 119-133
Author(s):  
Janet Heasman ◽  
C. C. Wylie
Keyword(s):  
Xenopus Laevis ◽  
Germ Cells ◽  
Primordial Germ Cells ◽  
Structural Features ◽  
Culture Conditions ◽  
Structural Basis ◽  
Electron Microscopic ◽  
Microscopic Studies

Primordial germ cells (PGCs) of Xenopus laevis have been isolated from early embryos and kept alive in vitro, in order to study the structural basis of their motility, using the transmission and scanning electron microscope. The culture conditions used mimicked as closely as possible the in vivo environment of migrating PGCs, in that isolated PGCs were seeded onto monolayers of amphibian mesentery cells. In these conditions we have demonstrated that: (a) No significant differences were found between the morphology of PGCs in vitro and in vivo. (b) Structural features involved in PGC movement in vitro include (i) the presence of a filamentous substructure, (ii) filopodial and blunt cell processes, (iii) cell surface specializations. These features are also characteristic of migratory PGCs studied in vivo. (c) PGCs in vitro have powers of invasion similar to those of migrating PGCs in vivo. They occasionally become completely surrounded by cells of the monolayer and, in this situation, bear striking resemblance to PGCs moving between mesentery cells to the site of the developing gonad in stage-44 tadpoles. We conclude that as far as it is possible to assess, the behaviour of isolated PGCs in these in vitro conditions mimics their activities in vivo. This allows us to study the ultrastructural basis of their migration.

scholarly journals Inhibition of oocyte growth factors in vivo modulates ovarian folliculogenesis in neonatal and immature mice

Reproduction ◽  
2010 ◽  
Vol 139 (3) ◽  
pp. 587-598 ◽  
Author(s):  
Samu Myllymaa ◽  
Arja Pasternack ◽  
David G Mottershead ◽  
Matti Poutanen ◽  
Minna M Pulkki ◽  
...  
Keyword(s):  
Growth Factors ◽  
Granulosa Cells ◽  
Microscopic Analysis ◽  
Corpora Lutea ◽  
Electron Microscopic ◽  
Oocyte Growth ◽  
Long Term Study ◽  
Ovarian Folliculogenesis

Growth differentiation factor-9 (GDF9) and bone morphogenetic protein-15 (BMP15) are among the key regulators transmitting the signaling between the oocyte and the surrounding granulosa cells. Previously, it has been shown that a recombinant BMP type II receptor ectodomain–Fc fusion protein (BMPR2ecd–Fc) is able to inhibit the actions of GDF9 and BMP15 in vitro. Here, we have produced bioactive BMPR2ecd–Fc, which was injected i.p. into neonatal mice. Early folliculogenesis was first studied by injecting mice five times with various doses of BMPR2ecd–Fc during the postnatal days 4–12. Folliculogenesis was affected dose dependently, as evidenced by a decreased mitogenesis of granulosa cells of the growing follicles. Furthermore, we also noticed a decrease in the number of secondary and tertiary follicles as well as an increase in the oocyte size. Electron microscopic analysis revealed that the ultrastructure of the granulosa cells of the primary follicles was not affected by the BMPR2ecd–Fc treatment. A second study was conducted to investigate whether a longer treatment with 12 injections during postnatal days 4–28 would inhibit folliculogenesis. Similar effects were observed in the two studies on the early follicular developmental stages. However, in the long-term study, later stages of folliculogenesis were not blocked but rather increased numbers of antral follicles, preovulatory follicles, and corpora lutea were found. We conclude that BMPR2ecd–Fc is a potent modulator of ovarian folliculogenesis in vivo, and thus, is a valuable tool for studying the physiology and downstream effects of oocyte-derived growth factors in vivo.

Sign in / Sign up

Export Citation Format

Share Document