scholarly journals Removal of Heavy Metals from Chithrapuzha River Water by Iron Oxide Nanoparticles Prepared Via Green Synthesis Methods

2020 ◽  
Vol 36 (6) ◽  
pp. 1154-1160
Author(s):  
G. DEEPA ◽  
M. JEYARAJ ◽  
P. N. Magudeswaran

On account of industrialization and increasing population, the water bodies get polluted by means of degradable and non-degradable substances. In 21st century, it is necessary to maintain a healthy environment especially water bodies for the survival of not the aquatic animals but also for healthy human life. Recent advances suggest that the issues related to water quality could be resolved by using nanoparticles and nano-filtration membrane methods from the development of nanotechnology. In this research, attempt to remove heavy metals from Chithrapuzha River water at Cochin bar mouth (S1) and Fact barge jetty (S2) using Fe2O3 prepared via green synthesis using Egg albumin and Aloe vera. Our results provoke that, the synthesis of Fe2O3 nanoparticle is cost-effective and eco-friendly and also good in nano-regime. Results of filtration studies showed that Fe2O3 nanoparticles remove heavy metals from Chithrapuzha River water and also increases the DO content which helps the survival of aquatic life.

Author(s):  
Totka Dodevska ◽  
Dobrin Hadzhiev ◽  
Ivan Shterev ◽  
Yanna Lazarova

Recently, the development of eco-friendly, cost-effective and reliable methods for synthesis of metal nanoparticles has drawn a considerable attention. The so-called green synthesis, using mild reaction conditions and natural resources as plant extracts and microorganisms, has established as a convenient, sustainable, cheap and environmentally safe approach for synthesis of a wide range of nanomaterials. Over the past decade, biosynthesis is regarded as an important tool for reducing the harmful effects of traditional nanoparticle synthesis methods commonly used in laboratories and industry. This review emphasizes the significance of biosynthesized metal nanoparticles in the field of electrochemical sensing. There is increasing evidence that green synthesis of nanoparticles provides a new direction in designing of cost-effective, highly sensitive and selective electrode-catalysts applicable in food, clinical and environmental analysis. The article is based on 157 references and provided a detailed overview on the main approaches for green synthesis of metal nanoparticles and their applications in designing of electrochemical sensor devices. Important operational characteristics including sensitivity, dynamic range, limit of detection, as well as data on stability and reproducibility of sensors have also been covered. Keywords: biosynthesis; green synthesis; nanomaterials; nanotechnology; modified electrodes


2021 ◽  
Vol 11 (4) ◽  
pp. 12326-12347

Groundwater serves as the water recharge of surface water and provides clean water for domestic, industrial, and agricultural usage for human life. However, rapid developments resulted in groundwater contamination by heavy metals, pesticides, waste by-products, cosmetics, pharmaceutics, and biological agents. Groundwater contamination by the percolation of heavy metals (HM) is focused on in this review. Heavy metals known for their persistence, bioaccumulation, and biomagnification properties are hazardous to live organisms. Long-term exposure to heavy metals brings adverse effects on respiratory diseases, cardiovascular disorders, cancer, etc. They are considered toxins, carcinogens, mutagens, and teratogens for humans in low concentrations. Hence, technologies to remediate heavy metals and organic pollutant in groundwater is vital to prevent environmental and health issues. However, current conventional remediation technologies that are expensive, utilize hazardous materials, and produce toxic by-products in effluents are insufficient to alleviate heavy metals' effects in groundwater. Thus, an eco-friendly and cost-effective rhizofiltration method that adsorb, concentrate, and precipitate contaminants in or on plants' rhizosphere is introduced. This review portrays the mechanisms involved in rhizofiltration to remediate heavy metals-contaminated groundwater and describes the gaps for rhizofiltration to be a commercially viable technology.


Author(s):  
Khalid Mahmood Anjum ◽  
Atif Yaqub ◽  
Ehsan Mehmood Bhatti ◽  
Muhamad Yameen ◽  
Muhammad Sharif Mughal ◽  
...  

Reasonable evidences suggest that heavy metal pollutants have been added by factories and other industries to our local water bodies. The present study was conducted to determine the heavy metal (zinc and lead) concentrations in muscle tissues of Labeo rohita inhabiting local water bodies as well as those being raised at farms. Sampling was performed to collect Labeo rohita from two different stations along river Ravi, viz. Lahore Siphon (upstream) and Balloki Headworks (downstream). Additionally, samples were also obtained from the government operated as well as private fish farms located in Lahore District, Pakistan. The fish were dissected; their muscles were digested, filtered, and finally analyzed for concentrations of Zn and Pb. Significant variation of heavy metal ions were observed between two sites along river Ravi as well as government operated and private fish farms. Significantly high mean concentrations of Zn (10.7±1.268) and Pb (0.61±0.082) were observed at Balloki Head-works; whereas, the lowest Zn (1.58±0.235) and Pb (0.16±0.008) heavy metal levels were recorded in the muscle samples collected from private fish farms. It was also observed that the heavy metal concentration in the muscles of Labeo rohita, collected from Balloki Head-works was much higher than the permissible limits laid down by WHO/FAO. Further the recorded highest level of heavy metals in water samples collected from River Ravi indicates that the bioaccumulation of heavy metals is severely affecting the aquatic life of fresh water and industries should not be allowed to release their effluent directly into the river Ravi in their vicinity.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Dayanand Bhaurao Jadhav ◽  
Rajendra D. Kokate

PurposeRenewable energy alternatives and nanoscale materials have gained huge attention in recent years due to the problems associated with fossil fuels. The recyclable battery is one of the recent developments to address the energy requirement issues. In this work, the development of nanoscale materials is focused on using green synthesis methods to address the energy requirements of hybrid electric vehicles.Design/methodology/approachThe current research focuses on developing metal oxide nanoscale materials (NANO-SMs). The Zno-Aloe vera NANO-SM is prepared using the green synthesis method. The developed nanoscale materials are characterized using analysis methods like FESEM, TEM, XRD and FTIR.FindingsThe average size of ZnO-Aloe vera mono-crystalline was recorded as 60–70 nm/Hexagonal shape. The nanoscale materials are used for the detection of LPG gases. The sensitivity observed was 48%. The response time and recovery time were recorded as 8–10 s and 230–250 s, respectively. The average size of SnO2-green papaya leaves poly-crystalline was recorded as 10–20 nm/powder form.Originality/valueNanoscale materials are developed using green synthesis methods for hybrid vehicle applications. The nanoscale materials are used for the detection of harmful gases in hybrid vehicles.


Author(s):  
Lavanya Krishnadhas ◽  
Santhi R. ◽  
Annapurani S.

Nanoparticles are gaining interest in biomedical applications due to its importance such as anti-bacterial, anti-fungal and anti-cancer agents. Conventional methods for the synthesis of metal nanoparticles involves toxic reagents which produce harmful by-products and are hazardous to the environment. To overcome these limitations, green synthesis of nanoparticles was established. Eco-friendly methods using plant extracts are gaining popularity due to the abundance of raw materials and the production of non-toxic by-products threatening to the environment. Moreover, the nanoparticles synthesized from the plant extract are cost-effective. In addition, nanoparticles produced by green synthesis methods produces synergetic effect where both the nanoparticles as well as the natural bioactive constituents of the plant influence the biocidal properties. Different methods namely heating in water bath, microwave oven and exposure to bright sunlight were adopted for the synthesis of silver nanoparticles. Plant extract based synthesis of silver nanoparticles was eco-friendly and shows an alternative promise in bio-medical applications and it undertakes the negative effects of synthetic drugs.


Catalysts ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 902
Author(s):  
Pritam Kumar Dikshit ◽  
Jatin Kumar ◽  
Amit K. Das ◽  
Soumi Sadhu ◽  
Sunita Sharma ◽  
...  

The past decade has witnessed a phenomenal rise in nanotechnology research due to its broad range of applications in diverse fields including food safety, transportation, sustainable energy, environmental science, catalysis, and medicine. The distinctive properties of nanomaterials (nano-sized particles in the range of 1 to 100 nm) make them uniquely suitable for such wide range of functions. The nanoparticles when manufactured using green synthesis methods are especially desirable being devoid of harsh operating conditions (high temperature and pressure), hazardous chemicals, or addition of external stabilizing or capping agents. Numerous plants and microorganisms are being experimented upon for an eco–friendly, cost–effective, and biologically safe process optimization. This review provides a comprehensive overview on the green synthesis of metallic NPs using plants and microorganisms, factors affecting the synthesis, and characterization of synthesized NPs. The potential applications of metal NPs in various sectors have also been highlighted along with the major challenges involved with respect to toxicity and translational research.


2018 ◽  
Vol 10 (Especial) ◽  
pp. 19-23
Author(s):  
Bruno Pereira Sossai ◽  
João Victor Carvalho de Andrade ◽  
John Lenon Benedito da Silva ◽  
Laís Gabriela Soares Marques ◽  
Lukas Fabiano Artuso ◽  
...  

The water bodies are of small or large size have a great importance within an ecosystem, since they are connected directly to the ecological balance, the present study had as objective to analyze water samples several points of a hydric body present within the urban perimeter, its methodology was derived from the Standard Methods for the Examination of Water and Wastewater, one of the most well-regarded books for water analysis, the results were satisfactory with answers that show that the water body has the capacity for aquatic life, and the conclusion is that requires greater care with these resources that are directly linked to human life.


Author(s):  
Rohit Rajendra Bhosale ◽  
A S Kulkarni ◽  
S S Gilda ◽  
N H Aloorkar ◽  
R A Osmani ◽  
...  

Nanotechnology is an escalating field that has made its contribution to all spheres of human life. The green synthesis of nanoparticles has paved for better methodologies and approaches in the medicinal field. Nowadays silver, gold and other metallic nanoparticles are used as an efficient carrier for drug molecules for developing novel drug delivery systems. In course of synthesizing these nanoparticles various chemicals, solvents and reagents are used which harms our eco system directly or indirectly. Silver nanoparticles (Ag NPs) have been widely used as a novel therapeutic agent extending its use as antibacterial, antifungal, anti-viral and anti-inflammatory agent. Silver nanoparticles (Ag NPs) prepared by green synthesis have many advantages over conventional methods involving chemical agents associated with environmental toxicity. Green synthetic methods include polysaccharide method, irradiation method, biological method, polyoxometallates method and tollens method. Green synthesis of nanoparticles is found to be an emerging branch of nanotechnology. The use of environmentally benign materials like plant leaf extract for the synthesis of nanoparticles offers numerous benefits of eco-friendliness and compatibility for pharmaceutical and biomedical applications as they do not use toxic chemicals in the synthesis protocols. Rapid and green synthetic methods using various plant extracts have shown a great potential in silver nanoparticles (Ag NPs) synthesis. This review article describes the bio-inspired synthesis of nanoparticles that provides advancement over chemical and physical methods as it is cost effective, eco-friendly and more effective in a variety of applications.


Molecules ◽  
2021 ◽  
Vol 26 (8) ◽  
pp. 2236
Author(s):  
Rosana A. Gonçalves ◽  
Rosimara P. Toledo ◽  
Nirav Joshi ◽  
Olivia M. Berengue

Over the last two decades, oxide nanostructures have been continuously evaluated and used in many technological applications. The advancement of the controlled synthesis approach to design desired morphology is a fundamental key to the discipline of material science and nanotechnology. These nanostructures can be prepared via different physical and chemical methods; however, a green and ecofriendly synthesis approach is a promising way to produce these nanostructures with desired properties with less risk of hazardous chemicals. In this regard, ZnO and TiO2 nanostructures are prominent candidates for various applications. Moreover, they are more efficient, non-toxic, and cost-effective. This review mainly focuses on the recent state-of-the-art advancements in the green synthesis approach for ZnO and TiO2 nanostructures and their applications. The first section summarizes the green synthesis approach to synthesize ZnO and TiO2 nanostructures via different routes such as solvothermal, hydrothermal, co-precipitation, and sol-gel using biological systems that are based on the principles of green chemistry. The second section demonstrates the application of ZnO and TiO2 nanostructures. The review also discusses the problems and future perspectives of green synthesis methods and the related issues posed and overlooked by the scientific community on the green approach to nanostructure oxides.


Molecules ◽  
2021 ◽  
Vol 26 (21) ◽  
pp. 6389
Author(s):  
Kaushik Kumar Bharadwaj ◽  
Bijuli Rabha ◽  
Siddhartha Pati ◽  
Tanmay Sarkar ◽  
Bhabesh Kumar Choudhury ◽  
...  

Gold nanoparticles (AuNPs) have been widely explored and are well-known for their medical applications. Chemical and physical synthesis methods are a way to make AuNPs. In any case, the hunt for other more ecologically friendly and cost-effective large-scale technologies, such as environmentally friendly biological processes known as green synthesis, has been gaining interest by worldwide researchers. The international focus on green nanotechnology research has resulted in various nanomaterials being used in environmentally and physiologically acceptable applications. Several advantages over conventional physical and chemical synthesis (simple, one-step approach to synthesize, cost-effectiveness, energy efficiency, and biocompatibility) have drawn scientists’ attention to exploring the green synthesis of AuNPs by exploiting plants’ secondary metabolites. Biogenic approaches, mainly the plant-based synthesis of metal nanoparticles, have been chosen as the ideal strategy due to their environmental and in vivo safety, as well as their ease of synthesis. In this review, we reviewed the use of green synthesized AuNPs in the treatment of cancer by utilizing phytochemicals found in plant extracts. This article reviews plant-based methods for producing AuNPs, characterization methods of synthesized AuNPs, and discusses their physiochemical properties. This study also discusses recent breakthroughs and achievements in using green synthesized AuNPs in cancer treatment and different mechanisms of action, such as reactive oxygen species (ROS), mediated mitochondrial dysfunction and caspase activation, leading to apoptosis, etc., for their anticancer and cytotoxic effects. Understanding the mechanisms underlying AuNPs therapeutic efficacy will aid in developing personalized medicines and treatments for cancer as a potential cancer therapeutic strategy.


Sign in / Sign up

Export Citation Format

Share Document