Evaluating Radiant Heater Performance Using Chick Thermal Preference and Spatial Analysis

2021 ◽  
Vol 37 (3) ◽  
pp. 447-454
Author(s):  
John E Linhoss ◽  
Joseph L Purswell ◽  
Jeremiah D Davis
Keyword(s):  
Spatial Analysis ◽  
Thermal Comfort ◽  
Power Output ◽  
Thermal Environment ◽  
Heat Energy ◽  
Radiant Flux ◽  
Broiler Chicks ◽  
List Type ◽  
Thermal Preference ◽  
Radiant Heater

HighlightsRadiant heaters from different manufacturers with the same power output do not produce the same radiant distribution.Heater net usable area is influenced by heater elevation and chick preferences for radiant flux.Radiant heaters should be operated at manufacturer specified elevations to minimize potential reductions in performance.Abstract. Radiant heaters are the most common method of providing supplemental heat in broiler houses, but little is known about how efficiently they create a suitable thermal environment for brooding chicks. This study investigates the net usable area (NUA), or the total floor area within the range of radiant flux preferred by chicks, for six round radiant heaters with a nominally rated power output of 11.72 kW. NUA was calculated for all heaters at three manufacturer specified heights 1.52, 1.83, and 1.98 m and at a distance 0.3 m below manufacturer specified height (1.22 m). NUA ranged from 11.6 ± 0.7 m2 to 59.4 ± 19.7 m2 and increased with heater mounting elevation. Results indicate that radiant heaters from different manufacturers with the same power output do not produce the same NUA. NUA was also shown to be higher at 8 d than 1 d for all heaters and was attributed to the decrease in chick preference for level of radiant flux during the first week of brooding. NUA gross radiant coefficient (GRC), or the proportion of the heat energy in the fuel that reached the floor and was within the thermal comfort range of the chicks, did not exceed 0.37 for any heater and decreased with heater elevation. Operating a heater below the manufacturer specified mounting elevations led to reduced NUA and an overall less efficient use of fuel. Keywords: Broiler chicks, Brooding, Net usable area, Radiant heaters, Thermal preference.

scholarly journals Does a neutral thermal sensation determine thermal comfort?

2018 ◽  
Vol 39 (2) ◽  
pp. 183-195 ◽  
Author(s):  
Sally Shahzad ◽  
John Brennan ◽  
Dimitris Theodossopoulos ◽  
John K Calautit ◽  
Ben R Hughes
Keyword(s):  
Thermal Comfort ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
Building Design ◽  
Thermal Preference ◽  
Practical Application ◽  
Comfort Zone ◽  
Indoor Thermal Environment ◽  
Human Thermal Comfort ◽  
Comfort Condition

The neutral thermal sensation (neither cold, nor hot) is widely used through the application of the ASHRAE seven-point thermal sensation scale to assess thermal comfort. This study investigated the application of the neutral thermal sensation and it questions the reliability of any study that solely relies on neutral thermal sensation. Although thermal-neutrality has already been questioned, still most thermal comfort studies only use this measure to assess thermal comfort of the occupants. In this study, the connection of the occupant’s thermal comfort with thermal-neutrality was investigated in two separate contexts of Norwegian and British offices. Overall, the thermal environment of four office buildings was evaluated and 313 responses (three times a day) to thermal sensation, thermal preference, comfort, and satisfaction were recorded. The results suggested that 36% of the occupants did not want to feel neutral and they considered thermal sensations other than neutral as their comfort condition. Also, in order to feel comfortable, respondents reported wanting to feel different thermal sensations at different times of the day suggesting that occupant desire for thermal comfort conditions may not be as steady as anticipated. This study recommends that other measures are required to assess human thermal comfort, such as thermal preference. Practical application: This study questions the application of neutral thermal sensation as the measure of thermal comfort. The findings indicate that occupant may consider other sensations than neutral as comfortable. This finding directly questions the standard comfort zone (e.g. ASHRAE Standard 55) as well as the optimum temperature, as many occupants required different thermal sensations at different times of the day to feel comfortable. These findings suggest that a steady indoor thermal environment does not guarantee thermal comfort and variations in the room temperature, which can be controlled by the occupant, need to be considered as part of the building design.

Radiant Flux Preference of Neonatal Broiler Chicks During Brooding

2018 ◽  
Vol 61 (4) ◽  
pp. 1417-1423
Author(s):  
John E. Linhoss ◽  
Joseph L. Purswell ◽  
Jeremiah D. Davis
Keyword(s):  
Thermal Environment ◽  
Linear Regression Analysis ◽  
Radiant Heat ◽  
Radiant Flux ◽  
Broiler Chicks ◽  
Treatment Area ◽  
The Mean ◽  
Gender Groups ◽  
Mixed Gender ◽  
Broiler House

Abstract. Radiant heat is the most common method of providing supplemental heat in a broiler house. However, little information exists about chick preference for radiant flux. Identifying the ranges of radiant flux that chicks prefer would allow improved management of the thermal environment. The objectives of this study were to determine the radiant flux ranges preferred by broiler chicks during the first eight days of brooding. Three trials were conducted using straight-run broiler chicks. A total of 88 chicks were randomly allocated into two mixed-gender groups and placed into identical 1 m × 4 m pens for 8 d. Heat lamps were used to create radiant flux zones of 30, 70, 175, and 450 W m-2 in each pen. Chicks were allowed to move freely between the zones, and feed and water were available in each treatment area. Chick location was recorded with a camera at 5 min intervals. For each image, non-linear regression analysis was applied to the cumulative proportion of chicks in each treatment. The resulting equations were used to calculate the range of radiant flux values for which 80% of the chicks exhibited a preference. Chicks exhibited a preference for decreasing radiant flux with age. The mean maximum preferred radiant flux for all trials decreased from 409.4 W m-2 at 1 d to 304.4 W m-2 at 8 d. The mean minimum preferred radiant flux for all trials decreased from 114.5 W m-2 at 1 d to 31.4 W m-2 at 8 d. Keywords: Broiler chicks, Brooding, Radiant flux, Radiant heaters, Thermal preference.

scholarly journals Evaluating the Connection between Thermal Comfort and Productivity in Buildings: A Systematic Literature Review

Buildings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 244
Author(s):  
Ana Maria Bueno ◽  
Antonio Augusto de Paula Xavier ◽  
Evandro Eduardo Broday
Keyword(s):  
Literature Review ◽  
Thermal Comfort ◽  
Systematic Literature Review ◽  
Thermal Environment ◽  
Final Analysis ◽  
Personal Factors ◽  
Exclusion Criteria ◽  
Environment Variables ◽  
Main Factors ◽  
Combination Of Methods

The thermal environment is one of the main factors that influence thermal comfort and, consequently, the productivity of occupants inside buildings. Throughout the years, research has described the connection between thermal comfort and productivity. Mathematical models have been established in the attempt to predict changes in productivity according to thermal variations in the environment. Some of these models have failed for a number of reasons, including the understanding of the effect that several environment variables have had on performance. From this context, a systematic literature review was carried out with the aim of verifying the connection between thermal comfort and productivity and the combinations of different thermal and personal factors that can have an effect on productivity. A hundred and twenty-eight articles were found which show a connection between productivity and some thermal comfort variables. By means of specific inclusion and exclusion criteria, 60 articles were selected for a final analysis. The main conclusions found in this study were: (i) the vast majority of research uses subjective measures and/or a combination of methods to evaluate productivity; (ii) performance/productivity can be attained within an ampler temperature range; (iii) few studies present ways of calculating productivity.

scholarly journals Development of a Deep Neural Network Model for Estimating Joint Location of Occupant Indoor Activities for Providing Thermal Comfort

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 696
Author(s):  
Eun Ji Choi ◽  
Jin Woo Moon ◽  
Ji-hoon Han ◽  
Yongseok Yoo
Keyword(s):  
Neural Network ◽  
Thermal Comfort ◽  
Deep Neural Network ◽  
Mean Squared Error ◽  
Thermal Environment ◽  
The Body ◽  
Estimation Accuracy ◽  
Accurate Estimation ◽  
Body Parts ◽  
Joint Location

The type of occupant activities is a significantly important factor to determine indoor thermal comfort; thus, an accurate method to estimate occupant activity needs to be developed. The purpose of this study was to develop a deep neural network (DNN) model for estimating the joint location of diverse human activities, which will be used to provide a comfortable thermal environment. The DNN model was trained with images to estimate 14 joints of a person performing 10 common indoor activities. The DNN contained numerous shortcut connections for efficient training and had two stages of sequential and parallel layers for accurate joint localization. Estimation accuracy was quantified using the mean squared error (MSE) for the estimated joints and the percentage of correct parts (PCP) for the body parts. The results show that the joint MSEs for the head and neck were lowest, and the PCP was highest for the torso. The PCP for individual activities ranged from 0.71 to 0.92, while typing and standing in a relaxed manner were the activities with the highest PCP. Estimation accuracy was higher for relatively still activities and lower for activities involving wide-ranging arm or leg motion. This study thus highlights the potential for the accurate estimation of occupant indoor activities by proposing a novel DNN model. This approach holds significant promise for finding the actual type of occupant activities and for use in target indoor applications related to thermal comfort in buildings.

scholarly journals Thermal Preferences of Cowpea Seed Beetles (Callosobruchus maculatus): Effects of Sex and Nuptial Gift Transfers

Insects ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 310
Author(s):  
Dariusz Krzysztof Małek ◽  
Marcin Czarnoleski
Keyword(s):  
Water Balance ◽  
Callosobruchus Maculatus ◽  
Thermal Environment ◽  
Nuptial Gift ◽  
Thermal Preference ◽  
Nuptial Gifts ◽  
Insect Performance ◽  
Evaporative Water ◽  
Thermal Preferences ◽  
Seed Beetles

The thermal environment influences insect performance, but the factors affecting insect thermal preferences are rarely studied. We studied Callosobruchus maculatus seed beetles and hypothesized that thermal preferences are influenced by water balance, with individuals with limited water reserves preferring cooler habitats to reduce evaporative water loss. Adult C. maculatus, in their flightless morph, do not consume food or water, but a copulating male provides a female with a nuptial gift of ejaculate containing nutrients and water. We hypothesized that gift recipients would prefer warmer habitats than gift donors and that both sexes would plastically adjust their thermal preferences according to the size of the transferred gift. We measured the thermal preference in each sex in individuals that were mated once or were unmated. In the mated group, we measured the sizes of the nuptial gifts and calculated proportional body mass changes in each mate during copulation. Supporting the role of water balance in thermal preference, females preferred warmer habitats than males. Nevertheless, thermal preferences in either sex were not affected by mating status or gift size. It is likely that high rates of mating and gift transfers in C. maculatus living under natural conditions promoted the evolution of constitutive sex-dependent thermal preferences.

scholarly journals How Can We Adapt Thermal Comfort for Disabled Patients? A Case Study of French Healthcare Buildings in Summer

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4530
Author(s):  
Youcef Bouzidi ◽  
Zoubayre El Akili ◽  
Antoine Gademer ◽  
Nacef Tazi ◽  
Adil Chahboun
Keyword(s):  
Thermal Comfort ◽  
Thermal Environment ◽  
Residential Buildings ◽  
Linear Regression Analysis ◽  
Environmental Parameters ◽  
Physical Parameters ◽  
Mean Radiant Temperature ◽  
Operative Temperature ◽  
Neutral Temperature ◽  
Radiant Temperature

This paper investigates adaptive thermal comfort during summer in medical residences that are located in the French city of Troyes and managed by the Association of Parents of Disabled Children (APEI). Thermal comfort in these buildings is evaluated using subjective measurements and objective physical parameters. The thermal sensations of respondents were determined by questionnaires, while thermal comfort was estimated using the predicted mean vote (PMV) model. Indoor environmental parameters (relative humidity, mean radiant temperature, air temperature, and air velocity) were measured using a thermal environment sensor during the summer period in July and August 2018. A good correlation was found between operative temperature, mean radiant temperature, and PMV. The neutral temperature was determined by linear regression analysis of the operative temperature and Fanger’s PMV model. The obtained neutral temperature is 23.7 °C. Based on the datasets and questionnaires, the adaptive coefficient α representing patients’ capacity to adapt to heat was found to be 1.261. A strong correlation was also observed between the sequential thermal index n(t) and the adaptive temperature. Finally, a new empirical model of adaptive temperature was developed using the data collected from a longitudinal survey in four residential buildings of APEI in summer, and the obtained adaptive temperature is 25.0 °C with upper and lower limits of 24.7 °C and 25.4 °C.

Thermal environment and thermal comfort built by decoupled radiant cooling units with low radiant cooling temperature

2021 ◽  
Vol 206 ◽  
pp. 108342
Author(s):  
Yuying Liang ◽  
Nan Zhang ◽  
Huijun Wu ◽  
Xinhua Xu ◽  
Ke Du ◽  
...  
Keyword(s):  
Thermal Comfort ◽  
Thermal Environment ◽  
Cooling Temperature ◽  
Radiant Cooling

scholarly journals Towards Sustainable Development: Building’s Retrofitting with PCMs to Enhance the Indoor Thermal Comfort in Tropical Climate, Malaysia

2021 ◽  
Vol 13 (7) ◽  
pp. 3614
Author(s):  
Zeyad Amin Al-Absi ◽  
Mohd Isa Mohd Hafizal ◽  
Mazran Ismail ◽  
Azhar Ghazali
Keyword(s):  
Climate Change ◽  
Sustainable Development ◽  
Thermal Comfort ◽  
Phase Change Materials ◽  
Thermal Environment ◽  
High Energy ◽  
Transition Temperatures ◽  
Indoor Thermal Environment ◽  
Adaptive Thermal Comfort ◽  
The Difference

Building sector is associated with high energy consumption and greenhouse gas emissions, which contribute to climate change. Sustainable development emphasizes any actions to reduce climate change and its effect. In Malaysia, half of the energy utilized in buildings goes towards building cooling. Thermal comfort studies and adaptive thermal comfort models reflect the high comfort temperatures for Malaysians in naturally conditioned buildings, which make it possible to tackle the difference between buildings’ indoor temperature and the required comfort temperature by using proper passive measures. This study investigates the effectiveness of building’s retrofitting with phase change materials (PCMs) as a passive cooling technology to improve the indoor thermal environment for more comfortable conditions. PCM sheets were numerically investigated below the internal finishing of the walls. The investigation involved an optimization study for the PCMs transition temperatures and quantities. The results showed significant improvement in the indoor thermal environment, especially when using lower transition temperatures and higher quantities of PCMs. Therefore, the monthly thermal discomfort time has decreased completely, while the thermal comfort time has increased to as high as 98%. The PCM was effective year-round and the optimum performance for the investigated conditions was achieved when using 18mm layer of PCM27-26.

scholarly journals The Street Air Warming Phenomenon in a High-Rise Compact City

Atmosphere ◽  
2018 ◽  
Vol 9 (10) ◽  
pp. 402 ◽  
Author(s):  
Xiaoxue Wang ◽  
Yuguo Li ◽  
Xinyan Yang ◽  
Pak Chan ◽  
Janet Nichol ◽  
...  
Keyword(s):  
Thermal Comfort ◽  
Air Temperature ◽  
Thermal Environment ◽  
Urban Climate ◽  
Pollutant Dispersion ◽  
Urban Morphology ◽  
Air Temperatures ◽  
Significant Difference ◽  
Sensitivity Studies ◽  
Weather Stations

The street thermal environment is important for thermal comfort, urban climate and pollutant dispersion. A 24-h vehicle traverse study was conducted over the Kowloon Peninsula of Hong Kong in summer, with each measurement period consisting of 2–3 full days. The data covered a total of 158 loops in 198 h along the route on sunny days. The measured data were averaged by three methods (direct average, FFT filter and interpolated by the piecewise cubic Hermite interpolation). The average street air temperatures were found to be 1–3 °C higher than those recorded at nearby fixed weather stations. The street warming phenomenon observed in the study has substantial implications as usually urban heat island (UHI) intensity is estimated from measurement at fixed weather stations, and therefore the UHI intensity in the built areas of the city may have been underestimated. This significant difference is of interest for studies on outdoor air temperature, thermal comfort, urban environment and pollutant dispersion. The differences were simulated by an improved one-dimensional temperature model (ZERO-CAT) using different urban morphology parameters. The model can correct the underestimation of street air temperature. Further sensitivity studies show that the building arrangement in the daytime and nighttime plays different roles for air temperature in the street. City designers can choose different parameters based on their purpose.

scholarly journals Energy-saving potential of intermittent heating system: Influence of composite phase change wall and optimization strategy

2020 ◽  
pp. 014459872096921
Author(s):  
Yanru Li ◽  
Enshen Long ◽  
Lili Zhang ◽  
Xiangyu Dong ◽  
Suo Wang
Keyword(s):  
Energy Consumption ◽  
Thermal Comfort ◽  
Phase Change ◽  
Air Temperature ◽  
Indoor Air ◽  
Thermal Environment ◽  
Optimization Strategy ◽  
Indoor Thermal Environment ◽  
Indoor Thermal Comfort ◽  
Intermittent Heating

In the Yangtze River zone of China, the heating operation in buildings is mainly part-time and part-space, which could affect the indoor thermal comfort while making the thermal process of building envelope different. This paper proposed to integrate phase change material (PCM) to building walls to increase the indoor thermal comfort and attenuate the temperature fluctuations during intermittent heating. The aim of this study is to investigate the influence of this kind of composite phase change wall (composite-PCW) on the indoor thermal environment and energy consumption of intermittent heating, and further develop an optimization strategy of intermittent heating operation by using EnergyPlus simulation. Results show that the indoor air temperature of the building with the composite-PCW was 2–3°C higher than the building with the reference wall (normal foamed concrete wall) during the heating-off process. Moreover, the indoor air temperature was higher than 18°C and the mean radiation temperature was above 20°C in the first 1 h after stopping heating. Under the optimized operation condition of turning off the heating device 1 h in advance, the heat release process of the composite-PCW to the indoor environment could maintain the indoor thermal environment within the comfortable range effectively. The composite-PCW could decrease 4.74% of the yearly heating energy consumption compared with the reference wall. The optimization described can provide useful information and guidance for the energy saving of intermittently heated buildings.

Sign in / Sign up

Export Citation Format

Share Document