Thermal environment and thermal comfort built by decoupled radiant cooling units with low radiant cooling temperature

2021 ◽  
Vol 206 ◽  
pp. 108342
Author(s):  
Yuying Liang ◽  
Nan Zhang ◽  
Huijun Wu ◽  
Xinhua Xu ◽  
Ke Du ◽  
...  
Keyword(s):  
Thermal Comfort ◽  
Thermal Environment ◽  
Cooling Temperature ◽  
Radiant Cooling

Evaluation of Indoor Thermal Environment in a Radiant-Cooled-Floor Office Building in Malaysia

2014 ◽  
Vol 564 ◽  
pp. 228-233 ◽  
Author(s):  
Qi Jie Kwong ◽  
Mohamad Afri Arsad ◽  
Nor Mariah Adam
Keyword(s):  
Thermal Comfort ◽  
Thermal Environment ◽  
Cooling System ◽  
Thermal Sensation ◽  
Office Building ◽  
Air Velocity ◽  
Variable Air Volume ◽  
Indoor Thermal Environment ◽  
Radiant Cooling ◽  
Comfort Parameters

This paper presents the findings of a thermal comfort survey conducted in a tropical green office building. The building was installed with a slab-integrated radiant cooling system, which operated concurrently with an integrated variable-air-volume system. Evaluation of indoor thermal environment was made, where both objective and subjective assessments were carried out. The air temperature, air velocity, relative humidity and surface temperatures were measured by using calibrated sensors. Based on the data collected from the field assessment, the thermal comforts indices with expectancy factor were calculated. The results showed that thermal comfort parameters were within the comfort range specified in a local guideline, except for the air velocity profile. Besides, discrepancy between the Predicted Mean Vote (PMV) with expectancy factor and Actual Mean Vote (AMV) was found, which showed that the former still overestimated the thermal sensation of occupants although an expectancy factor of 0.5 was used.

scholarly journals Evaluating the Connection between Thermal Comfort and Productivity in Buildings: A Systematic Literature Review

Buildings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 244
Author(s):  
Ana Maria Bueno ◽  
Antonio Augusto de Paula Xavier ◽  
Evandro Eduardo Broday
Keyword(s):  
Literature Review ◽  
Thermal Comfort ◽  
Systematic Literature Review ◽  
Thermal Environment ◽  
Final Analysis ◽  
Personal Factors ◽  
Exclusion Criteria ◽  
Environment Variables ◽  
Main Factors ◽  
Combination Of Methods

The thermal environment is one of the main factors that influence thermal comfort and, consequently, the productivity of occupants inside buildings. Throughout the years, research has described the connection between thermal comfort and productivity. Mathematical models have been established in the attempt to predict changes in productivity according to thermal variations in the environment. Some of these models have failed for a number of reasons, including the understanding of the effect that several environment variables have had on performance. From this context, a systematic literature review was carried out with the aim of verifying the connection between thermal comfort and productivity and the combinations of different thermal and personal factors that can have an effect on productivity. A hundred and twenty-eight articles were found which show a connection between productivity and some thermal comfort variables. By means of specific inclusion and exclusion criteria, 60 articles were selected for a final analysis. The main conclusions found in this study were: (i) the vast majority of research uses subjective measures and/or a combination of methods to evaluate productivity; (ii) performance/productivity can be attained within an ampler temperature range; (iii) few studies present ways of calculating productivity.

scholarly journals Development of a Deep Neural Network Model for Estimating Joint Location of Occupant Indoor Activities for Providing Thermal Comfort

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 696
Author(s):  
Eun Ji Choi ◽  
Jin Woo Moon ◽  
Ji-hoon Han ◽  
Yongseok Yoo
Keyword(s):  
Neural Network ◽  
Thermal Comfort ◽  
Deep Neural Network ◽  
Mean Squared Error ◽  
Thermal Environment ◽  
The Body ◽  
Estimation Accuracy ◽  
Accurate Estimation ◽  
Body Parts ◽  
Joint Location

The type of occupant activities is a significantly important factor to determine indoor thermal comfort; thus, an accurate method to estimate occupant activity needs to be developed. The purpose of this study was to develop a deep neural network (DNN) model for estimating the joint location of diverse human activities, which will be used to provide a comfortable thermal environment. The DNN model was trained with images to estimate 14 joints of a person performing 10 common indoor activities. The DNN contained numerous shortcut connections for efficient training and had two stages of sequential and parallel layers for accurate joint localization. Estimation accuracy was quantified using the mean squared error (MSE) for the estimated joints and the percentage of correct parts (PCP) for the body parts. The results show that the joint MSEs for the head and neck were lowest, and the PCP was highest for the torso. The PCP for individual activities ranged from 0.71 to 0.92, while typing and standing in a relaxed manner were the activities with the highest PCP. Estimation accuracy was higher for relatively still activities and lower for activities involving wide-ranging arm or leg motion. This study thus highlights the potential for the accurate estimation of occupant indoor activities by proposing a novel DNN model. This approach holds significant promise for finding the actual type of occupant activities and for use in target indoor applications related to thermal comfort in buildings.

scholarly journals How Can We Adapt Thermal Comfort for Disabled Patients? A Case Study of French Healthcare Buildings in Summer

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4530
Author(s):  
Youcef Bouzidi ◽  
Zoubayre El Akili ◽  
Antoine Gademer ◽  
Nacef Tazi ◽  
Adil Chahboun
Keyword(s):  
Thermal Comfort ◽  
Thermal Environment ◽  
Residential Buildings ◽  
Linear Regression Analysis ◽  
Environmental Parameters ◽  
Physical Parameters ◽  
Mean Radiant Temperature ◽  
Operative Temperature ◽  
Neutral Temperature ◽  
Radiant Temperature

This paper investigates adaptive thermal comfort during summer in medical residences that are located in the French city of Troyes and managed by the Association of Parents of Disabled Children (APEI). Thermal comfort in these buildings is evaluated using subjective measurements and objective physical parameters. The thermal sensations of respondents were determined by questionnaires, while thermal comfort was estimated using the predicted mean vote (PMV) model. Indoor environmental parameters (relative humidity, mean radiant temperature, air temperature, and air velocity) were measured using a thermal environment sensor during the summer period in July and August 2018. A good correlation was found between operative temperature, mean radiant temperature, and PMV. The neutral temperature was determined by linear regression analysis of the operative temperature and Fanger’s PMV model. The obtained neutral temperature is 23.7 °C. Based on the datasets and questionnaires, the adaptive coefficient α representing patients’ capacity to adapt to heat was found to be 1.261. A strong correlation was also observed between the sequential thermal index n(t) and the adaptive temperature. Finally, a new empirical model of adaptive temperature was developed using the data collected from a longitudinal survey in four residential buildings of APEI in summer, and the obtained adaptive temperature is 25.0 °C with upper and lower limits of 24.7 °C and 25.4 °C.

Design Range of Indoor Relative Humidity in Radiant Cooling Environment

2011 ◽  
Vol 243-249 ◽  
pp. 4905-4908
Author(s):  
Xue Min Sui ◽  
Xu Zhang ◽  
Guang Hui Han
Keyword(s):  
Relative Humidity ◽  
Thermal Comfort ◽  
Mean Radiant Temperature ◽  
Design Standards ◽  
Human Thermal Comfort ◽  
Radiant Cooling ◽  
Climate Parameter ◽  
Radiant Temperature ◽  
Thermal Comfort Model ◽  
The Impact

Relative humidity is an important micro-climate parameter in radiant cooling environment. Based on the human thermal comfort model, this paper studied the effect on PMV index of relative humidity, and studied the relationship of low mean radiant temperature and relative humidity, drew the appropriate design range of indoor relative humidity for radiant cooling systems.The results show that high relative humidity can compensate for the impact on thermal comfort of low mean radiant temperature, on the premise of achieving the same thermal comfort requirements. However, because of the limited compensation range of relative humidity, together with the constraints for it due to anti-condensation of radiant terminal devices, the design range of relative humidity should not be improved, and it can still use the traditional air-conditioning design standards.

scholarly journals Towards Sustainable Development: Building’s Retrofitting with PCMs to Enhance the Indoor Thermal Comfort in Tropical Climate, Malaysia

2021 ◽  
Vol 13 (7) ◽  
pp. 3614
Author(s):  
Zeyad Amin Al-Absi ◽  
Mohd Isa Mohd Hafizal ◽  
Mazran Ismail ◽  
Azhar Ghazali
Keyword(s):  
Climate Change ◽  
Sustainable Development ◽  
Thermal Comfort ◽  
Phase Change Materials ◽  
Thermal Environment ◽  
High Energy ◽  
Transition Temperatures ◽  
Indoor Thermal Environment ◽  
Adaptive Thermal Comfort ◽  
The Difference

Building sector is associated with high energy consumption and greenhouse gas emissions, which contribute to climate change. Sustainable development emphasizes any actions to reduce climate change and its effect. In Malaysia, half of the energy utilized in buildings goes towards building cooling. Thermal comfort studies and adaptive thermal comfort models reflect the high comfort temperatures for Malaysians in naturally conditioned buildings, which make it possible to tackle the difference between buildings’ indoor temperature and the required comfort temperature by using proper passive measures. This study investigates the effectiveness of building’s retrofitting with phase change materials (PCMs) as a passive cooling technology to improve the indoor thermal environment for more comfortable conditions. PCM sheets were numerically investigated below the internal finishing of the walls. The investigation involved an optimization study for the PCMs transition temperatures and quantities. The results showed significant improvement in the indoor thermal environment, especially when using lower transition temperatures and higher quantities of PCMs. Therefore, the monthly thermal discomfort time has decreased completely, while the thermal comfort time has increased to as high as 98%. The PCM was effective year-round and the optimum performance for the investigated conditions was achieved when using 18mm layer of PCM27-26.

scholarly journals The Street Air Warming Phenomenon in a High-Rise Compact City

Atmosphere ◽  
2018 ◽  
Vol 9 (10) ◽  
pp. 402 ◽  
Author(s):  
Xiaoxue Wang ◽  
Yuguo Li ◽  
Xinyan Yang ◽  
Pak Chan ◽  
Janet Nichol ◽  
...  
Keyword(s):  
Thermal Comfort ◽  
Air Temperature ◽  
Thermal Environment ◽  
Urban Climate ◽  
Pollutant Dispersion ◽  
Urban Morphology ◽  
Air Temperatures ◽  
Significant Difference ◽  
Sensitivity Studies ◽  
Weather Stations

The street thermal environment is important for thermal comfort, urban climate and pollutant dispersion. A 24-h vehicle traverse study was conducted over the Kowloon Peninsula of Hong Kong in summer, with each measurement period consisting of 2–3 full days. The data covered a total of 158 loops in 198 h along the route on sunny days. The measured data were averaged by three methods (direct average, FFT filter and interpolated by the piecewise cubic Hermite interpolation). The average street air temperatures were found to be 1–3 °C higher than those recorded at nearby fixed weather stations. The street warming phenomenon observed in the study has substantial implications as usually urban heat island (UHI) intensity is estimated from measurement at fixed weather stations, and therefore the UHI intensity in the built areas of the city may have been underestimated. This significant difference is of interest for studies on outdoor air temperature, thermal comfort, urban environment and pollutant dispersion. The differences were simulated by an improved one-dimensional temperature model (ZERO-CAT) using different urban morphology parameters. The model can correct the underestimation of street air temperature. Further sensitivity studies show that the building arrangement in the daytime and nighttime plays different roles for air temperature in the street. City designers can choose different parameters based on their purpose.

scholarly journals Energy-saving potential of intermittent heating system: Influence of composite phase change wall and optimization strategy

2020 ◽  
pp. 014459872096921
Author(s):  
Yanru Li ◽  
Enshen Long ◽  
Lili Zhang ◽  
Xiangyu Dong ◽  
Suo Wang
Keyword(s):  
Energy Consumption ◽  
Thermal Comfort ◽  
Phase Change ◽  
Air Temperature ◽  
Indoor Air ◽  
Thermal Environment ◽  
Optimization Strategy ◽  
Indoor Thermal Environment ◽  
Indoor Thermal Comfort ◽  
Intermittent Heating

In the Yangtze River zone of China, the heating operation in buildings is mainly part-time and part-space, which could affect the indoor thermal comfort while making the thermal process of building envelope different. This paper proposed to integrate phase change material (PCM) to building walls to increase the indoor thermal comfort and attenuate the temperature fluctuations during intermittent heating. The aim of this study is to investigate the influence of this kind of composite phase change wall (composite-PCW) on the indoor thermal environment and energy consumption of intermittent heating, and further develop an optimization strategy of intermittent heating operation by using EnergyPlus simulation. Results show that the indoor air temperature of the building with the composite-PCW was 2–3°C higher than the building with the reference wall (normal foamed concrete wall) during the heating-off process. Moreover, the indoor air temperature was higher than 18°C and the mean radiation temperature was above 20°C in the first 1 h after stopping heating. Under the optimized operation condition of turning off the heating device 1 h in advance, the heat release process of the composite-PCW to the indoor environment could maintain the indoor thermal environment within the comfortable range effectively. The composite-PCW could decrease 4.74% of the yearly heating energy consumption compared with the reference wall. The optimization described can provide useful information and guidance for the energy saving of intermittently heated buildings.

scholarly journals ADAPTIVE HOUSE DESIGN AND PEOPLE’S HABITS IN ACHIEVING THERMAL COMFORT IN GAYO HIGHLAND ACEH, INDONESIA

2021 ◽  
Vol 8 (1) ◽  
pp. 23
Author(s):  
Erna Meutia ◽  
Laina Hilma Sari
Keyword(s):  
Thermal Comfort ◽  
Thermal Environment ◽  
The Body ◽  
Mental Condition ◽  
Human Adaptation ◽  
Cold Environment ◽  
Adaptive Thermal Comfort ◽  
Aceh Province ◽  
Lower Temperature ◽  
House Design

The Gayo Highland is one of the districts in Aceh Province, Sumatra. Due to the topography, this area has a lower  temperature compared than the flat and coastal areas in Aceh. The thermal comfort that is felt is based on a person's mental condition and how he expresses his satisfaction with his thermal environment. In other words, it shows how humans adapt to their thermal environment. Thermal comfort based on human adaptation is known as adaptive thermal comfort. The form of dwelling for the Gayo Highland community has shifted and changed from traditional dwelling to Transitional and Modern forms that influence the Gayo Highland community's adaptation to achieve thermal comfort. Therefore, this paper aims to investigate the house design in Gayo highland in providing warmth to the occupants naturally in the cold environment. Another aim of this study is to investigate the people's habits in warming up the body to deal with the low air temperature in the area.  This study shows how the local people adapt themselves through the house element and daily habit to gain the internal thermal comfort.

scholarly journals Thermal Comfort and Energy Analysis of a Hybrid Cooling System by Coupling Natural Ventilation with Radiant and Indirect Evaporative Cooling

Energies ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7825
Author(s):  
Pradeep Shakya ◽  
Gimson Ng ◽  
Xiaoli Zhou ◽  
Yew Wah Wong ◽  
Swapnil Dubey ◽  
...  
Keyword(s):  
Thermal Comfort ◽  
Hybrid System ◽  
Natural Ventilation ◽  
Cooling System ◽  
Evaporative Cooling ◽  
Supply System ◽  
Hybrid Cooling ◽  
Air Supply ◽  
Radiant Cooling ◽  
Indirect Evaporative Cooling

A hybrid cooling system which combines natural ventilation with a radiant cooling system for a hot and humid climate was studied. Indirect evaporative cooling was used to produce chilled water at temperatures slightly higher than the dew point. With this hybrid system, the condensation issue on the panel surface of a chilled ceiling was overcome. A computational fluid dynamics (CFD) model was employed to determine the cooling load and the parameters required for thermal comfort analysis for this hybrid system in an office-sized, well-insulated test room. Upon closer investigation, it was found that the thermal comfort by the hybrid system was acceptable only in limited outdoor conditions. Therefore, the hybrid system with a secondary fresh air supply system was suggested. Furthermore, the energy consumptions of conventional all-air, radiant cooling, and hybrid systems including the secondary air supply system were compared under similar thermal comfort conditions. The predicted results indicated that the hybrid system saves up to 77% and 61% of primary energy when compared with all-air and radiant cooling systems, respectively, while maintaining similar thermal comfort.

Sign in / Sign up

Export Citation Format

Share Document