Protein adsorption to planar electrochemical sensors and sensor materials

2004 ◽  
Vol 76 (4) ◽  
pp. 753-763 ◽  
Author(s):  
Caroline Lim ◽  
S. Slack ◽  
S. Ufer ◽  
E. Lindner
Keyword(s):  
Protein Adsorption ◽  
Electrochemical Sensors ◽  
Surface Texturing ◽  
Active Surface ◽  
Electrochemical Sensing ◽  
Dlc Coating ◽  
Active Sensor ◽  
Poly Ethylene ◽  
Modified Sensor

In electrochemical sensing devices, aimed for acute and chronic in vivo application, the active surface of the sensor is often negligible compared to the overall surface area of the device in contact with the biological host. Consequently, to minimize the perturbation of an implanted sensor on the in vivo environment the chemical composition and surface texturing of the complete device (the active sensor, sensor substrate, and “accessories”) have to be considered. In our work, the adsorption of three abundant proteins (albumin, IgG, and fibrinogen) was determined quantitatively on untreated and modified sensor substrates and sensing membrane surfaces. In this study, a flexible polyimide-based material (Kapton ®) was used as sensor substrate with or without an amorphous diamond-like carbon (DLC) or an amorphous oxygen-containing DLC (o-DLC) coating. The ion-sensitive membranes were cast from high-molecular-weight (HMW) or carboxylated poly(vinyl chloride) (PVC) and were doped with increasing concentrations of highly hydrophilic poly(ethylene oxide) (PEO). The potentiometric characteristics of the potassium-selective membranes cast with up to 6 % PEO were the same as those without PEO. However, the PEO-modified PVC membranes elicited a large amount of protein adsorption, especially in terms of albumin.

scholarly journals Effect of nanocellulose polymorphism on electrochemical analytical performance in hybrid nanocomposites with non-oxidized single-walled carbon nanotubes

2022 ◽  
Vol 189 (2) ◽  
Author(s):  
Silvia Dortez ◽  
Tania Sierra ◽  
Miguel Á. Álvarez-Sánchez ◽  
José M. González-Domínguez ◽  
Ana M. Benito ◽  
...  
Keyword(s):  
Electrochemical Sensors ◽  
Critical Role ◽  
Active Surface ◽  
Analytical Performance ◽  
Electrochemical Sensing ◽  
Hybrid Nanocomposites ◽  
Type I ◽  
Single Walled Carbon ◽  
Sensitivity And Selectivity ◽  
Electrochemical Transducers

Abstract Two cellulose nanocrystals/single-walled carbon nanotube (CNC/SW) hybrids, using two cellulose polymorphs, were evaluated as electrochemical transducers: CNC type I (CNC-I/SW) and CNC type II (CNC-II/SW). They were synthesized and fully characterized, and their analytical performance as electrochemical sensors was carefully studied. In comparison with SWCNT-based and screen-printed carbon electrodes, CNC/SW sensors showed superior electroanalytical performance in terms of sensitivity and selectivity, not only in the detection of small metabolites (uric acid, dopamine, and tyrosine) but also in the detection of complex glycoproteins (alpha-1-acid glycoprotein (AGP)). More importantly, CNC-II/SW exhibited 20 times higher sensitivity than CNC-I/SW for AGP determination, yielding a LOD of 7 mg L−1.These results demonstrate the critical role played by nanocellulose polymorphism in the electrochemical performance of CNC/SW hybrid materials, opening new directions in the electrochemical sensing of these complex molecules. In general, these high-active-surface hybrids smartly exploited the preserved non-oxidized SW conductivity with the high aqueous dispersibility of the CNC, avoiding the use of organic solvents or the incorporation of toxic surfactants during their processing, making the CNC/SW hybrids promising nanomaterials for electrochemical detection following greener approaches. Graphical abstract

scholarly journals BSA Nanoparticles for siRNA Delivery: Coating Effects on Nanoparticle Properties, Plasma Protein Adsorption, andIn VitrosiRNA Delivery

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Haran Yogasundaram ◽  
Markian Stephan Bahniuk ◽  
Harsh-Deep Singh ◽  
Hamidreza Montezari Aliabadi ◽  
Hasan Uludaǧ ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Protein Adsorption ◽  
Sirna Delivery ◽  
Cell Uptake ◽  
Drug Delivery Vehicles ◽  
Therapeutic Molecules ◽  
Delivery Vehicles ◽  
Active Research ◽  
Poly Ethylene

Developing vehicles for the delivery of therapeutic molecules, like siRNA, is an area of active research. Nanoparticles composed of bovine serum albumin, stabilizedviathe adsorption of poly-L-lysine (PLL), have been shown to be potentially inert drug-delivery vehicles. With the primary goal of reducing nonspecific protein adsorption, the effect of using comb-type structures of poly(ethylene glycol) (1 kDa, PEG) units conjugated to PLL (4.2 and 24 kDa) on BSA-NP properties, apparent siRNA release rate, cell viability, and cell uptake were evaluated. PEGylated PLL coatings resulted in NPs withζ-potentials close to neutral. Incubation with platelet-poor plasma showed the composition of the adsorbed proteome was similar for all systems. siRNA was effectively encapsulated and released in a sustained manner from all NPs. With 4.2 kDa PLL, cellular uptake was not affected by the presence of PEG, but PEG coating inhibited uptake with 24 kDa PLL NPs. Moreover, 24 kDa PLL systems were cytotoxic and this cytotoxicity was diminished upon PEG incorporation. The overall results identified a BSA-NP coating structure that provided effective siRNA encapsulation while reducingζ-potential, protein adsorption, and cytotoxicity, necessary attributes forin vivoapplication of drug-delivery vehicles.

scholarly journals A wireless, implantable optoelectrochemical probe for optogenetic stimulation and dopamine detection

2020 ◽  
Author(s):  
Changbo Liu ◽  
Yu Zhao ◽  
Xue Cai ◽  
Yang Xie ◽  
Taoyi Wang ◽  
...  
Keyword(s):  
Electrochemical Sensors ◽  
Electrochemical Sensing ◽  
Light Sources ◽  
Loop Control ◽  
Light Emitting ◽  
Optogenetic Stimulation ◽  
Neural Activities ◽  
Dopamine Detection ◽  
Physical And Chemical

ABSTRACTPhysical and chemical technologies have been continuously progressing advances of neuroscience research. The development of research tools for closed-loop control and monitoring neural activities in behaving animals is highly desirable. In this paper, we introduce a wirelessly operated, miniaturized microprobe system for optical interrogation and neurochemical sensing in the deep brain. Via epitaxial liftoff and transfer printing, microscale light emitting diodes (micro-LEDs) as light sources, and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) coated diamond films as electrochemical sensors are vertically assembled to form implantable optoelectrochemical probes, for real-time optogenetic stimulation and dopamine detection capabilities. A customized, lightweight circuit module is employed for untethered, remote signal control and data acquisition. Injected into the ventral tegmental area (VTA) of freely behaving mice, in vivo experiments clearly demonstrate the utilities of the multifunctional optoelectrochemical microprobe system for optogenetic interference of place preferences and detection of dopamine release. The presented options for material and device integrations provide a practical route to simultaneous optical control and electrochemical sensing of complex nervous systems.

scholarly journals Osseointegrating and phase-oriented micro-arc-oxidized titanium dioxide bone implants

2021 ◽  
Vol 19 ◽  
pp. 228080002110068
Author(s):  
Hsien-Te Chen ◽  
Hsin-I Lin ◽  
Chi-Jen Chung ◽  
Chih-Hsin Tang ◽  
Ju-Liang He
Keyword(s):  
Titanium Dioxide ◽  
High Surface ◽  
Cell Activity ◽  
Active Surface ◽  
Rutile Phase ◽  
Hydroxyl Groups ◽  
Bone Implant ◽  
Implant System

Here, we present a bone implant system of phase-oriented titanium dioxide (TiO2) fabricated by the micro-arc oxidation method (MAO) on β-Ti to facilitate improved osseointegration. This (101) rutile-phase-dominant MAO TiO2 (R-TiO2) is biocompatible due to its high surface roughness, bone-mimetic structure, and preferential crystalline orientation. Furthermore, (101) R-TiO2 possesses active and abundant hydroxyl groups that play a significant role in enhancing hydroxyapatite formation and cell adhesion and promote cell activity leading to osseointegration. The implants had been elicited their favorable cellular behavior in vitro in the previous publications; in addition, they exhibit excellent shear strength and promote bone–implant contact, osteogenesis, and tissue formation in vivo. Hence, it can be concluded that this MAO R-TiO2 bone implant system provides a favorable active surface for efficient osseointegration and is suitable for clinical applications.

scholarly journals Influence of calcium ion-modified implant surfaces in protein adsorption and implant integration

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Eduardo Anitua ◽  
Andreia Cerqueira ◽  
Francisco Romero-Gavilán ◽  
Iñaki García-Arnáez ◽  
Cristina Martinez-Ramos ◽  
...  
Keyword(s):  
Protein Adsorption ◽  
Titanium Implant ◽  
Volume Density ◽  
Bone Implant ◽  
The Mean ◽  
Intervention Costs ◽  
Medial Section ◽  
Post Implantation

Abstract Background Calcium (Ca) is a well-known element in bone metabolism and blood coagulation. Here, we investigate the link between the protein adsorption pattern and the in vivo responses of surfaces modified with calcium ions (Ca-ion) as compared to standard titanium implant surfaces (control). We used LC–MS/MS to identify the proteins adhered to the surfaces after incubation with human serum and performed bilateral surgeries in the medial section of the femoral condyles of 18 New Zealand white rabbits to test osseointegration at 2 and 8 weeks post-implantation (n=9). Results Ca-ion surfaces adsorbed 181.42 times more FA10 and 3.85 times less FA12 (p<0.001), which are factors of the common and the intrinsic coagulation pathways respectively. We also detected differences in A1AT, PLMN, FA12, KNG1, HEP2, LYSC, PIP, SAMP, VTNC, SAA4, and CFAH (p<0.01). At 2 and 8 weeks post-implantation, the mean bone implant contact (BIC) with Ca-ion surfaces was respectively 1.52 and 1.25 times higher, and the mean bone volume density (BVD) was respectively 1.35 and 1.13 times higher. Differences were statistically significant for BIC at 2 and 8 weeks and for BVD at 2 weeks (p<0.05). Conclusions The strong thrombogenic protein adsorption pattern at Ca-ion surfaces correlated with significantly higher levels of implant osseointegration. More effective implant surfaces combined with smaller implants enable less invasive surgeries, shorter healing times, and overall lower intervention costs, especially in cases of low quantity or quality of bone.

scholarly journals Trends in Managing Cardiac and Orthopaedic Device-Associated Infections by Using Therapeutic Biomaterials

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1556
Author(s):  
Stefania Scialla ◽  
Giorgia Martuscelli ◽  
Francesco Nappi ◽  
Sanjeet Singh Avtaar Singh ◽  
Adelaide Iervolino ◽  
...  
Keyword(s):  
Clinical Medicine ◽  
Preventive Treatment ◽  
Active Surface ◽  
In Vivo Studies ◽  
Antibiotic Resistant ◽  
Implanted Medical Devices ◽  
Hospital Acquired ◽  
Systemic Antibiotics ◽  
The Impact

Over the years, there has been an increasing number of cardiac and orthopaedic implanted medical devices, which has caused an increased incidence of device-associated infections. The surfaces of these indwelling devices are preferred sites for the development of biofilms that are potentially lethal for patients. Device-related infections form a large proportion of hospital-acquired infections and have a bearing on both morbidity and mortality. Treatment of these infections is limited to the use of systemic antibiotics with invasive revision surgeries, which had implications on healthcare burdens. The purpose of this review is to describe the main causes that lead to the onset of infection, highlighting both the biological and clinical pathophysiology. Both passive and active surface treatments have been used in the field of biomaterials to reduce the impact of these infections. This includes the use of antimicrobial peptides and ionic liquids in the preventive treatment of antibiotic-resistant biofilms. Thus far, multiple in vivo studies have shown efficacious effects against the antibiotic-resistant biofilm. However, this has yet to materialize in clinical medicine.

scholarly journals Utilising Commercially Fabricated Printed Circuit Boards as an Electrochemical Biosensing Platform

Micromachines ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 793
Author(s):  
Uroš Zupančič ◽  
Joshua Rainbow ◽  
Pedro Estrela ◽  
Despina Moschou
Keyword(s):  
Printed Circuit Boards ◽  
Electrochemical Sensors ◽  
Cost Effective ◽  
Electrochemical Sensing ◽  
Label Free ◽  
Circuit Boards ◽  
Printed Circuit ◽  
Sensing Applications ◽  
Electrochemical Biosensing ◽  
Pre Treatment

Printed circuit boards (PCBs) offer a promising platform for the development of electronics-assisted biomedical diagnostic sensors and microsystems. The long-standing industrial basis offers distinctive advantages for cost-effective, reproducible, and easily integrated sample-in-answer-out diagnostic microsystems. Nonetheless, the commercial techniques used in the fabrication of PCBs produce various contaminants potentially degrading severely their stability and repeatability in electrochemical sensing applications. Herein, we analyse for the first time such critical technological considerations, allowing the exploitation of commercial PCB platforms as reliable electrochemical sensing platforms. The presented electrochemical and physical characterisation data reveal clear evidence of both organic and inorganic sensing electrode surface contaminants, which can be removed using various pre-cleaning techniques. We demonstrate that, following such pre-treatment rules, PCB-based electrodes can be reliably fabricated for sensitive electrochemical biosensors. Herein, we demonstrate the applicability of the methodology both for labelled protein (procalcitonin) and label-free nucleic acid (E. coli-specific DNA) biomarker quantification, with observed limits of detection (LoD) of 2 pM and 110 pM, respectively. The proposed optimisation of surface pre-treatment is critical in the development of robust and sensitive PCB-based electrochemical sensors for both clinical and environmental diagnostics and monitoring applications.

scholarly journals Molecularly Imprinted Polymers Combined with Electrochemical Sensors for Food Contaminants Analysis

Molecules ◽  
2021 ◽  
Vol 26 (15) ◽  
pp. 4607
Author(s):  
Dounia Elfadil ◽  
Abderrahman Lamaoui ◽  
Flavio Della Pelle ◽  
Aziz Amine ◽  
Dario Compagnone
Keyword(s):  
Food Safety ◽  
Molecularly Imprinted Polymers ◽  
Electrochemical Sensors ◽  
Low Cost ◽  
Electrochemical Analysis ◽  
Ease Of Use ◽  
Electrochemical Sensing ◽  
Food Contaminants ◽  
Molecularly Imprinted ◽  
Imprinted Polymers

Detection of relevant contaminants using screening approaches is a key issue to ensure food safety and respect for the regulatory limits established. Electrochemical sensors present several advantages such as rapidity; ease of use; possibility of on-site analysis and low cost. The lack of selectivity for electrochemical sensors working in complex samples as food may be overcome by coupling them with molecularly imprinted polymers (MIPs). MIPs are synthetic materials that mimic biological receptors and are produced by the polymerization of functional monomers in presence of a target analyte. This paper critically reviews and discusses the recent progress in MIP-based electrochemical sensors for food safety. A brief introduction on MIPs and electrochemical sensors is given; followed by a discussion of the recent achievements for various MIPs-based electrochemical sensors for food contaminants analysis. Both electropolymerization and chemical synthesis of MIP-based electrochemical sensing are discussed as well as the relevant applications of MIPs used in sample preparation and then coupled to electrochemical analysis. Future perspectives and challenges have been eventually given.

scholarly journals Poly(ethylene glycol)-b-poly(1,3-trimethylene carbonate) Amphiphilic Copolymers for Long-Acting Injectables: Synthesis, Non-Acylating Performance and In Vivo Degradation

Molecules ◽  
2021 ◽  
Vol 26 (5) ◽  
pp. 1438
Author(s):  
Silvio Curia ◽  
Feifei Ng ◽  
Marie-Emérentienne Cagnon ◽  
Victor Nicoulin ◽  
Adolfo Lopez-Noriega
Keyword(s):  
Ethylene Glycol ◽  
Ring Opening ◽  
Gel Chromatography ◽  
Amphiphilic Copolymers ◽  
Trimethylene Carbonate ◽  
Poly Ethylene Glycol ◽  
Poly Ethylene ◽  
Long Acting ◽  
In Vivo Degradation

This article presents the evaluation of diblock and triblock poly(ethylene glycol)-b-poly(1,3-trimethylene carbonate) amphiphilic copolymers (PEG-PTMCs) as excipients for the formulation of long-acting injectables (LAIs). Copolymers were successfully synthesised through bulk ring-opening polymerisation. The concomitant formation of PTMC homopolymer could not be avoided irrespective of the catalyst amount, but the by-product could easily be removed by gel chromatography. Pure PEG-PTMCs undergo faster erosion in vivo than their corresponding homopolymer. Furthermore, these copolymers show outstanding stability compared to their polyester analogues when formulated with amine-containing reactive drugs, which makes them particularly suitable as LAIs for the sustained release of drugs susceptible to acylation.

scholarly journals EFFECTS OF POLYMERIC NANOPARTICLE SURFACE PROPERTIES ON INTERACTION WITH BRAIN TUMOR ENVIRONMENT

Nano LIFE ◽  
2013 ◽  
Vol 03 (04) ◽  
pp. 1343003 ◽  
Author(s):  
BRANDON MATTIX ◽  
THOMAS MOORE ◽  
OLGA UVAROV ◽  
SAMUEL POLLARD ◽  
LAUREN O'DONNELL ◽  
...  
Keyword(s):  
Human Brain ◽  
Surface Charge ◽  
Cellular Uptake ◽  
Drug Clearance ◽  
Cellular Interaction ◽  
Normal Tissues ◽  
Poly Ethylene ◽  
Uptake Studies ◽  
Effect Of Surface

Current chemotherapy treatments are limited by poor drug solubility, rapid drug clearance and systemic side effects. Additionally, drug penetration into solid tumors is limited by physical diffusion barriers [e.g., extracellular matrix (ECM)]. Nanoparticle (NP) blood circulation half-life, biodistribution and ability to cross extracellular and cellular barriers will be dictated by NP composition, size, shape and surface functionality. Here, we investigated the effect of surface charge of poly(lactide)-poly(ethylene glycol) NPs on mediating cellular interaction. Polymeric NPs of equal sizes were used that had two different surface functionalities: negatively charged carboxyl ( COOH ) and neutral charged methoxy ( OCH 3). Cellular uptake studies showed significantly higher uptake in human brain cancer cells compared to noncancerous human brain cells, and negatively charged COOH NPs were uptaken more than neutral OCH 3 NPs in 2D culture. NPs were also able to load and control the release of paclitaxel (PTX) over 19 days. Toxicity studies in U-87 glioblastoma cells showed that PTX-loaded NPs were effective drug delivery vehicles. Effect of surface charge on NP interaction with the ECM was investigated using collagen in a 3D cellular uptake model, as collagen content varies with the type of cancer and the stage of the disease compared to normal tissues. Results demonstrated that NPs can effectively diffuse across an ECM barrier and into cells, but NP mobility is dictated by surface charge. In vivo biodistribution of OCH 3 NPs in intracranial tumor xenografts showed that NPs more easily accumulated in tumors with less collagen. These results indicate that a robust understanding of NP interaction with various tumor environments can lead to more effective patient-tailored therapies.

Sign in / Sign up

Export Citation Format

Share Document