scholarly journals Effect of container shape on freeze concentration of apple juice

PLoS ONE ◽  
2021 ◽  
Vol 16 (1) ◽  
pp. e0245606
Author(s):  
Tsuyoshi Yoda ◽  
Hiroshi Miyaki ◽  
Tomoaki Saito
Keyword(s):  
Melting Temperature ◽  
Large Scale ◽  
Apple Juice ◽  
Low Cost ◽  
Freeze Concentration ◽  
Commercial Processing ◽  
Complex Equipment ◽  
Container Shape ◽  
Concentration Methods ◽  
Insight Into

Concentrating fruit juices by freezing supports the maintenance of both nutrients and flavors. Development of the freezing concentration process has introduced equipment such as centrifuge or block freezing systems, which are suitable for large-scale commercial processing. However, the necessary characteristics of freeze concentration methods for juices include simplicity and low cost. This study examined the effects of different container shapes on the processes of freezing and melting. The shape of the container was found to be more important than the melting temperature, across a relatively large scale. Furthermore, the nutrient procyanidin B2 and saccharides were concentrated. The methods concentrated juice components under low cost conditions without complex equipment. This research thus not only offers benefits for commercial juice preparation but also provides new insight into effects of shape differences in concentration technologies.

scholarly journals Assessing trends in rat populations in urban and non-urban environments in the Netherlands

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Miriam Maas ◽  
Tamara Helsloot ◽  
Katsuhisa Takumi ◽  
Joke van der Giessen
Keyword(s):  
The Netherlands ◽  
Urban Areas ◽  
Large Scale ◽  
Low Cost ◽  
Urban Environments ◽  
Local Municipalities ◽  
Term Monitoring ◽  
Insight Into ◽  
Large Municipality

Abstract Rats in urban areas pose health risks as they can transmit various zoonotic pathogens. Monitoring rat populations in urban areas is therefore a key determinant in risk assessments for taking adequate control and preventive measures. However, large-scale and long-term monitoring of rat populations is labor-intensive and time consuming. The aim of this study was to develop a low-cost and low-time- consuming method to gain insight into the trends of rat populations in urban and non-urban environments in the Netherlands, and to identify potential drivers of these trends. From 2014 to 2018, local municipalities or their pest control organizations voluntarily submitted quarterly overviews of rat nuisance reports in urban areas. For non-urban areas, a nationwide record of reported bycatch species from the muskrat control was used to assess a potential trend. To identify potential drivers of observed trends, employees of nine municipalities were interviewed. Rat nuisance reports from 25 municipalities were analyzed. An increasing trend in rat nuisance reports was observed in 12, a decreasing trend in 3 and no trend in 10 municipalities. In non-urban areas, no trend in the bycatch of rats was detected. The increase in rat nuisance reports was associated with a large municipality resident size. No consistent drivers could be identified, but potential drivers were discussed in the interviews. Although it was not possible to quantify their influence on the rat population trends seen, they provide direction for future studies on drivers of rat populations.

scholarly journals Carbon Electrodes in Perovskite Photovoltaics

Materials ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 5989
Author(s):  
Preawpun Pradid ◽  
Kanyanee Sanglee ◽  
Non Thongprong ◽  
Surawut Chuangchote
Keyword(s):  
Solar Cells ◽  
High Performance ◽  
Large Scale ◽  
Carbon Materials ◽  
Low Cost ◽  
Perovskite Solar Cells ◽  
Deposition Process ◽  
Device Structures ◽  
Temperature Deposition ◽  
Insight Into

High-performance lab-scale perovskite solar cells often have a precious metal as the top electrode. However, there are drawbacks to using metal top electrodes on a large scale, such as inducing degradation processes, requiring a high-temperature deposition process under vacuum, and having low scalability. Recently many studies have shown the potentials of using a carbon electrode because of its conductivity, flexibility, low cost, and ease of fabrication. This review article presents an overview of using carbon materials to replace the top electrode in perovskite photovoltaics. We discuss various fabrication techniques, various carbon-based device structures, and the advantages of using carbon materials. A collection of research works on device performance, large-scale fabrication, and device stability is presented. As a result, this review offers insight into the future of large-scale flexible solar cells.

An Assessment of a Low-Cost Wastewater Disposal System after Twenty-Five Years of Operation

1987 ◽  
Vol 19 (5-6) ◽  
pp. 701-710 ◽  
Author(s):  
B. L. Reidy ◽  
G. W. Samson
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Wastewater Disposal ◽  
Industrial Base ◽  
Industrial Wastewaters ◽  
The Past ◽  
Gasification Process ◽  
Appropriate Treatment ◽  
Environmentally Safe ◽  
Coal Resource

A low-cost wastewater disposal system was commissioned in 1959 to treat domestic and industrial wastewaters generated in the Latrobe River valley in the province of Gippsland, within the State of Victoria, Australia (Figure 1). The Latrobe Valley is the centre for large-scale generation of electricity and for the production of pulp and paper. In addition other industries have utilized the brown coal resource of the region e.g. gasification process and char production. Consequently, industrial wastewaters have been dominant in the disposal system for the past twenty-five years. The mixed industrial-domestic wastewaters were to be transported some eighty kilometres to be treated and disposed of by irrigation to land. Several important lessons have been learnt during twenty-five years of operating this system. Firstly the composition of the mixed waste stream has varied significantly with the passage of time and the development of the industrial base in the Valley, so that what was appropriate treatment in 1959 is not necessarily acceptable in 1985. Secondly the magnitude of adverse environmental impacts engendered by this low-cost disposal procedure was not imagined when the proposal was implemented. As a consequence, clean-up procedures which could remedy the adverse effects of twenty-five years of impact are likely to be costly. The question then may be asked - when the total costs including rehabilitation are considered, is there really a low-cost solution for environmentally safe disposal of complex wastewater streams?

scholarly journals Rapid, large-scale species discovery in hyperdiverse taxa using 1D MinION sequencing

BMC Biology ◽  
2019 ◽  
Vol 17 (1) ◽  
Author(s):  
Amrita Srivathsan ◽  
Emily Hartop ◽  
Jayanthi Puniamoorthy ◽  
Wan Ting Lee ◽  
Sujatha Narayanan Kutty ◽  
...  
Keyword(s):  
Dna Sequences ◽  
Large Scale ◽  
Low Cost ◽  
Small Body ◽  
Small Subset ◽  
Similar Species ◽  
Large Species ◽  
Morphological Examination ◽  
Species Discovery ◽  
Short Period

Abstract Background More than 80% of all animal species remain unknown to science. Most of these species live in the tropics and belong to animal taxa that combine small body size with high specimen abundance and large species richness. For such clades, using morphology for species discovery is slow because large numbers of specimens must be sorted based on detailed microscopic investigations. Fortunately, species discovery could be greatly accelerated if DNA sequences could be used for sorting specimens to species. Morphological verification of such “molecular operational taxonomic units” (mOTUs) could then be based on dissection of a small subset of specimens. However, this approach requires cost-effective and low-tech DNA barcoding techniques because well-equipped, well-funded molecular laboratories are not readily available in many biodiverse countries. Results We here document how MinION sequencing can be used for large-scale species discovery in a specimen- and species-rich taxon like the hyperdiverse fly family Phoridae (Diptera). We sequenced 7059 specimens collected in a single Malaise trap in Kibale National Park, Uganda, over the short period of 8 weeks. We discovered > 650 species which exceeds the number of phorid species currently described for the entire Afrotropical region. The barcodes were obtained using an improved low-cost MinION pipeline that increased the barcoding capacity sevenfold from 500 to 3500 barcodes per flowcell. This was achieved by adopting 1D sequencing, resequencing weak amplicons on a used flowcell, and improving demultiplexing. Comparison with Illumina data revealed that the MinION barcodes were very accurate (99.99% accuracy, 0.46% Ns) and thus yielded very similar species units (match ratio 0.991). Morphological examination of 100 mOTUs also confirmed good congruence with morphology (93% of mOTUs; > 99% of specimens) and revealed that 90% of the putative species belong to the neglected, megadiverse genus Megaselia. We demonstrate for one Megaselia species how the molecular data can guide the description of a new species (Megaselia sepsioides sp. nov.). Conclusions We document that one field site in Africa can be home to an estimated 1000 species of phorids and speculate that the Afrotropical diversity could exceed 200,000 species. We furthermore conclude that low-cost MinION sequencers are very suitable for reliable, rapid, and large-scale species discovery in hyperdiverse taxa. MinION sequencing could quickly reveal the extent of the unknown diversity and is especially suitable for biodiverse countries with limited access to capital-intensive sequencing facilities.

scholarly journals Synthesis of Polyaniline Coating on the Modified Fiber Ball and Application for Cr(VI) Removal

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Xiao Li Ma ◽  
Guang Tao Fei ◽  
Shao Hui Xu
Keyword(s):  
Waste Water ◽  
Large Scale ◽  
Ph Value ◽  
Low Cost ◽  
Strong Acid ◽  
Removal Capacity ◽  
Secondary Pollution ◽  
Potential Possibility ◽  
Fiber Ball ◽  
Maximum Removal

Abstract In this study, polyaniline (PANI) is prepared by means of chemical oxidization polymerization and directly loaded on the modified fiber ball (m-FB) to obtain macroscale polyaniline/modified fiber ball (PANI/m-FB) composite, and then its removal ability of Cr(VI) is investigated. The effects of different parameters such as contact time, pH value and initial concentration on Cr(VI) removal efficiency are discussed. The experimental results illustrate that the favorable pH value is 5.0 and the maximum removal capacity is measured to be 293.13 mg g−1. Besides, PANI/m-FB composites can be regenerated and reused after being treated with strong acid. The kinetic study indicates that the adsorption procedure is mainly controlled by chemical adsorption. More importantly, the macroscale of composites can avoid secondary pollution efficiently. Benefiting from the low cost, easy preparation in large scale, environmentally friendly, excellent recycling performance as well as high removal ability, PANI/m-FB composites exhibit a potential possibility to remove Cr(VI) from industrial waste water. Graphic Abstract The polyaniline (PANI) was coated on modified fiber ball (m-FB) to remove Cr(VI) in waste water, and this kind of PANI/m-FB composites can avoid secondary pollution efficiently due to its macrostructure. Furthermore, the removal capacity can reach to 291.13 mg/g and can be multiple reused.

scholarly journals Effects of Ag contents on the microstructure and SERS performance of self-grown Ag nanoparticles/Mo–Ag alloy films

2020 ◽  
Vol 9 (1) ◽  
pp. 751-759 ◽  
Author(s):  
Xinxin Lian ◽  
Yuanjiang Lv ◽  
Haoliang Sun ◽  
David Hui ◽  
Guangxin Wang
Keyword(s):  
Ag Nanoparticles ◽  
Large Scale ◽  
Low Cost ◽  
Film Surface ◽  
Time Domain Analysis ◽  
Alloy Film ◽  
Scale Production ◽  
Alloy Films ◽  
Surface Enhanced Raman ◽  
Ag Film

AbstractAg nanoparticles/Mo–Ag alloy films with different Ag contents were prepared on polyimide by magnetron sputtering. The effects of Ag contents on the microstructure of self-grown Ag nanoparticles/Mo–Ag alloy films were investigated using XRD, FESEM, EDS and TEM. The Ag content plays an important role in the size and number of uniformly distributed Ag nanoparticles spontaneously formed on the Mo–Ag alloy film surface, and the morphology of the self-grown Ag nanoparticles has changed significantly. Additionally, it is worth noting that the Ag nanoparticles/Mo–Ag alloy films covered by a thin Ag film exhibits highly sensitive surface-enhanced Raman scattering (SERS) performance. The electric field distributions were calculated using finite-difference time-domain analysis to further prove that the SERS enhancement of the films is mainly determined by “hot spots” in the interparticle gap between Ag nanoparticles. The detection limit of the Ag film/Ag nanoparticles/Mo–Ag alloy film for Rhodamine 6G probe molecules was 5 × 10−14 mol/L. Therefore, the novel type of the Ag film/Ag nanoparticles/Mo–Ag alloy film can be used as an ideal SERS-active substrate for low-cost and large-scale production.

SateLoc: A Virtual Fingerprinting Approach to Outdoor LoRa Localization Using Satellite Images

2021 ◽  
Vol 17 (4) ◽  
pp. 1-28
Author(s):  
Yuxiang Lin ◽  
Wei Dong ◽  
Yi Gao ◽  
Tao Gu
Keyword(s):  
Land Cover ◽  
Large Scale ◽  
Satellite Images ◽  
Low Cost ◽  
Tracking Error ◽  
Location Based Services ◽  
Distance Constraint ◽  
Combination Strategy ◽  
Land Cover Types ◽  
High Resolution Satellite Images

With the increasing relevance of the Internet of Things and large-scale location-based services, LoRa localization has been attractive due to its low-cost, low-power, and long-range properties. However, existing localization approaches based on received signal strength indicators are either easily affected by signal fading of different land-cover types or labor intensive. In this work, we propose SateLoc, a LoRa localization system that utilizes satellite images to generate virtual fingerprints. Specifically, SateLoc first uses high-resolution satellite images to identify land-cover types. With the path loss parameters of each land-cover type, SateLoc can automatically generate a virtual fingerprinting map for each gateway. We then propose a novel multi-gateway combination strategy, which is weighted by the environmental interference of each gateway, to produce a joint likelihood distribution for localization and tracking. We implement SateLoc with commercial LoRa devices without any hardware modification, and evaluate its performance in a 227,500-m urban area. Experimental results show that SateLoc achieves a median localization error of 43.5 m, improving more than 50% compared to state-of-the-art model-based approaches. Moreover, SateLoc can achieve a median tracking error of 37.9 m with the distance constraint of adjacent estimated locations. More importantly, compared to fingerprinting-based approaches, SateLoc does not require the labor-intensive fingerprint acquisition process.

scholarly journals Extraction of short chain chitooligosaccharides from fungal biomass and their use as promoters of arbuscular mycorrhizal symbiosis

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Andrea Crosino ◽  
Elisa Moscato ◽  
Marco Blangetti ◽  
Gennaro Carotenuto ◽  
Federica Spina ◽  
...  
Keyword(s):  
Fungal Biomass ◽  
Large Scale ◽  
Low Cost ◽  
Trichoderma Viride ◽  
Arbuscular Mycorrhizal ◽  
Am Fungi ◽  
Production Costs ◽  
Short Chain ◽  
Mycorrhizal Symbiosis ◽  
Major Interest

AbstractShort chain chitooligosaccharides (COs) are chitin derivative molecules involved in plant-fungus signaling during arbuscular mycorrhizal (AM) interactions. In host plants, COs activate a symbiotic signalling pathway that regulates AM-related gene expression. Furthermore, exogenous CO application was shown to promote AM establishment, with a major interest for agricultural applications of AM fungi as biofertilizers. Currently, the main source of commercial COs is from the shrimp processing industry, but purification costs and environmental concerns limit the convenience of this approach. In an attempt to find a low cost and low impact alternative, this work aimed to isolate, characterize and test the bioactivity of COs from selected strains of phylogenetically distant filamentous fungi: Pleurotus ostreatus, Cunninghamella bertholletiae and Trichoderma viride. Our optimized protocol successfully isolated short chain COs from lyophilized fungal biomass. Fungal COs were more acetylated and displayed a higher biological activity compared to shrimp-derived COs, a feature that—alongside low production costs—opens promising perspectives for the large scale use of COs in agriculture.

Sign in / Sign up

Export Citation Format

Share Document