scholarly journals Reliable Integrated Satellite Terrestrial Communications using MIMO for Mitigation of Microwave Absorption by Earths Oxygen

2019 ◽  
Vol 69 (5) ◽  
pp. 458-463 ◽  
Author(s):  
Anurag Vijay Agrawal ◽  
Meenakshi Rawat
Keyword(s):  
Communication Networks ◽  
Data Transmission ◽  
Communication Systems ◽  
Smart Cities ◽  
Signal To Noise Ratio ◽  
Multiple Input Multiple Output ◽  
Data Communication ◽  
Error Vector Magnitude ◽  
High Data ◽  
Data Rates

Microwaves are used to communicate with satellite and terrestrial communication networks. But as microwaves pass through the Earth’s atmosphere, the oxygen gas absorbs microwave. In this 5G era, when the whole world is moving towards high data-rates and reliable communications, this absorption affects the data transmission in Integrated Satellite/Terrestrial Communication (ISTC) systems, which leads to degradation of the system performance. The multiple-input-multiple-output (MIMO) technology has become a boon for modern wireless communication systems to achieve the necessities of higher data-rates and communication reliability. The paper analyses the MIMO effect on block error rate (BLER), error vector magnitude (EVM) and throughput performance of the data transmission with different MIMO configurations. The paper establishes that better data-rates as well as reliable data communication is achieved with higher order MIMO configurations. MIMO 8×1 provides 5, 20 and 42.5 times improved performance to BLER; 5.26%, 25% and 81.82% in throughput; and 10.34%, 23.07% and 28% in EVM calculations as comparable to MIMO 4×1, MIMO 2×1 and SISO 1×1, respectively at 15 dB signal-to-noise ratio (SNR). The authors also give a new concept of multi-cellular layers based mobile communication network, useful for future smart cities.

scholarly journals Optimization of system’s parameters for wavelength conversion of E-band signals

2022 ◽  
Vol 12 (2) ◽  
pp. 1659
Author(s):  
Yazan Alkhlefat ◽  
Sevia Mahdaliza Idrus Sutan Nameh ◽  
Farabi M. Iqbal
Keyword(s):  
Communication Systems ◽  
Orthogonal Frequency Division Multiplexing ◽  
High Speed ◽  
Wavelength Conversion ◽  
Signal To Noise Ratio ◽  
Optical Amplifier ◽  
Optical Signal ◽  
Error Vector Magnitude ◽  
Wavelength Converter ◽  
High Data

Current and future wireless communication systems are designed to achieve the user’s demands such as high data rate and high speed with low latency and simultaneously to save bandwidth and spectrum. In 5G and 6G networks, a high speed of transmitting and switching is required for internet of things (IoT) applications with higher capacity. To achieve these requirements a semiconductor optical amplifier (SOA) is considered as a wavelength converter to transmit a signal with an orthogonal frequency division multiplexing with subcarrier power modulation (OFDM-SPM). It exploits the subcarrier’s power in conventional OFDM block in order to send additional bits beside the normally transmitted bits. In this paper, we optimized the SOA’s parameters to have efficient wavelength conversion process. These parameters are included the injection current (IC) of SOA, power of pump and probe signals. A 7 Gbps OFDM-SPM signal with a millimeter waves (MMW) carrier of 80 GHz is considered for signal switching. The simulation results investigated and analyzed the performance of the designed system in terms of error vector magnitude (EVM), bit error rate (BER) and optical signal-to-noise ratio (OSNR). The optimum value of IC is 0.6 A while probe power is 9.45 and 8.9 dBm for pump power. The simulation is executed by virtual photonic integrated (VPI) software.

scholarly journals Performance Analysis of Hard-Switching Based Hybrid FSO/RF System over Turbulence Channels

Computation ◽  
2019 ◽  
Vol 7 (2) ◽  
pp. 28 ◽  
Author(s):  
Hira Khalid ◽  
Sajid Sheikh Muhammad ◽  
Hector E. Nistazakis ◽  
George S. Tombras
Keyword(s):  
Communication Networks ◽  
Signal To Noise Ratio ◽  
Ergodic Capacity ◽  
Numerical Comparison ◽  
Wireless Communication Networks ◽  
High Data ◽  
Data Rates ◽  
Turbulence Effect ◽  
Increasing Demand ◽  
Alternative Good

The hybrid system of free space optic (FSO) and radio frequency (RF) has come forth as alternative good solution for increasing demand for high data rates in wireless communication networks. In this paper, wireless networks with hard-switching between FSO and RF link are analyzed, assuming that at a certain time point either one of the two links are active, with FSO link having higher priority. As the signal-to-noise ratio (SNR) of FSO link falls below a certain selected threshold, the RF link is activated. In this work, it is assumed that the FSO link follows Gamma-Gamma fading due to the atmospheric turbulence effect whereas RF link experiences Rayleigh fading. To analyze the proposed hybrid model, analytical expressions are derived for the outage probability, bit error rate and ergodic capacity. A numerical comparison is also done between the performances of the proposed hybrid FSO/RF model and the single FSO model.

scholarly journals Optical Camera Communications for IoT–Rolling-Shutter Based MIMO Scheme with Grouped LED Array Transmitter

Sensors ◽  
2020 ◽  
Vol 20 (12) ◽  
pp. 3361 ◽  
Author(s):  
Shivani Rajendra Teli ◽  
Vicente Matus ◽  
Stanislav Zvanovec ◽  
Rafael Perez-Jimenez ◽  
Stanislav Vitek ◽  
...  
Keyword(s):  
Signal To Noise Ratio ◽  
Light Emitting Diode ◽  
Multiple Input Multiple Output ◽  
Raspberry Pi ◽  
High Data ◽  
Data Throughput ◽  
Data Rates ◽  
Led Array ◽  
Communication Links ◽  
Input Multiple Output

In optical camera communications (OCC), the provision of both flicker-free illumination and high data rates are challenging issues, which can be addressed by utilizing the rolling-shutter (RS) property of the image sensors as the receiver (Rx). In this paper, we propose an RS-based multiple-input multiple-output OCC scheme for the Internet of things (IoT) application. A simplified design of multi-channel transmitter (Tx) using a 7.2 × 7.2 cm2 small 8 × 8 distributed light emitting diode (LED) array, based on grouping of LEDs, is proposed for flicker-free transmission. We carry out an experimental investigation of the indoor OCC system by employing a Raspberry Pi camera as the Rx, with RS capturing mode. Despite the small area of the display, flicker-free communication links within the range of 20–100 cm are established with data throughput of 960 to 120 bps sufficient for IoT. A method to extend link spans up to 1.8 m and the data throughput to 13.44 kbps using different configurations of multi-channel Tx is provided. The peak signal-to-noise ratio of ~14 and 16 dB and the rate of successfully received bits of 99.4 and 81% are measured for the shutter speeds of 200 and 800 µs for a link span of 1 m, respectively.

scholarly journals Receiver design for MIMO FSO communication systems with photon-counting detection

2019 ◽  
Author(s):  
◽  
Rami Issam El Mawla
Keyword(s):  
Communication Systems ◽  
Multiple Input Multiple Output ◽  
Photon Counting ◽  
Cost Effective ◽  
Research Area ◽  
Receiver Design ◽  
Free Space Optical ◽  
High Data ◽  
Data Rates ◽  
Input Multiple Output

Optical wireless communication (OWC) constitutes a key technology for 5G wireless networks. OWC alleviates the radio frequency (RF) spectrum crunch problem by enabling communications in the visible, infrared and ultraviolet optical frequency bands for a variety of indoor and outdoor applications. Outdoor infrared OWC systems are widely referred to as free-space optical (FSO) communications that rely on line-of-sight transmissions of narrow laser beams. The FSO technology is license-free, easy-to-deploy, cost-effective and capable of delivering very high data rates. The major impairment that severely degrades the performance of FSO links is related to the random aspect of the atmosphere. Overcoming atmospheric turbulence-induced fading became the key research area where many solutions have been proposed and analyzed. These solutions include the multiple-input-multiple-output (MIMO) techniques.

scholarly journals MIMO performance of a planar logarithmically periodic antenna with respect to measured channel matrices

2008 ◽  
Vol 6 ◽  
pp. 55-61
Author(s):  
H. Rabe ◽  
D. Kornek ◽  
M. Stege ◽  
I. Rolfes
Keyword(s):  
Outage Probability ◽  
Communication Systems ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Research Area ◽  
Wide Frequency Range ◽  
Spatial Multiplexing ◽  
High Data ◽  
Data Rates ◽  
Input Multiple Output

Abstract. The increasing interest in wireless transmission of highest data rates for multimedia applications (e.g. HDTV) demands the use of communication systems as e.g. described in the IEEE 802.11n draft specification for WLAN including spatial multiplexing or transmit diversity to achieve a constant high data rate and a small outage probability. In a wireless communications system the transmission of parallel data stream leads to multiple input/multiple output (MIMO) systems, whose key parameters heavily depend on the properties of the mobile channel. Assuming an uncorrelated channel matrix the correlation between the multiplexed data streams is caused by the coupling of the antennas, so that the radiation element becomes an even more important part of the system. Previous work in this research area (Klemp and Eul, 2006) has shown that planar log.-per four arm antennas are promising candidates for MIMO applications providing two nearly decorrelated radiators, which cover a wide frequency range including both WLAN bands at 2.4 GHz and 5.4 GHz. Up to now the MIMO performance of this antenna is mainly analyzed by simulations. In this contribution measured channel matrices in a real office environment are studied in terms of the antenna's MIMO performance such as outage probability. The obtained results recorded by using a commercial platform are compared to the simulated ones.

scholarly journals mmWave massive analog relay MIMO

2021 ◽  
Vol 2 (6) ◽  
pp. 43-55
Author(s):  
Kei Sakaguchi ◽  
Takumi Yoneda ◽  
Masashi Iwabuchi ◽  
Tomoki Murakami
Keyword(s):  
Communication Systems ◽  
Vehicular Networks ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Path Loss ◽  
Relay Nodes ◽  
High Data ◽  
Data Rates ◽  
Input Multiple Output ◽  
4G Lte

Millimeter-Wave (mmWave) communications are a key technology to realize ultra-high data rate and ultra-low latency wireless communications. Compared with conventional communication systems in the microwave band such as 4G/LTE, mmWave communications employ a higher frequency band which allows a wider bandwidth and is suitable for large capacity communications. It is expected to be applied to various use cases such as mmWave cellular networks and vehicular networks. However, due to the strong diffraction loss and the path loss in the mmWave band, it is difficult or even impossible to achieve high channel capacity for User Equipment (UE) located in Non-Line-Of-Sight (NLOS) environments. To solve the problem, the deployment of relay nodes has been considered. In this paper, we consider the use of massive analog Relay Stations (RSs) to relay the transmission signals. By relaying the signals by a large number of RSs, an artificial Multiple-Input Multiple-Output (MIMO) propagation environment can be formed, which enables mmWave MIMO communications to the NLOS environment. We describe a theoretical study of a massive relay MIMO system and extend it to include multi-hop relays. Simulations are conducted, and the numerical results show that the proposed system achieves high data rates even in a grid-like urban environment.

scholarly journals In-Band OSNR Measurement Method for All-Optical Regenerators in Optical Domain

2019 ◽  
Vol 9 (24) ◽  
pp. 5438
Author(s):  
Feng Wan ◽  
Baojian Wu ◽  
Feng Wen ◽  
Kun Qiu
Keyword(s):  
Measurement Method ◽  
Signal To Noise Ratio ◽  
Optical Signal ◽  
Error Vector Magnitude ◽  
Regeneration System ◽  
Data Rates ◽  
All Optical ◽  
Communication Links ◽  
Shift Keying ◽  
Nonlinear Devices

We propose an in-band measurement method of optical signal-to-noise ratio (OSNR) output from an all-optical regeneration system with a nonlinear power transfer function (PTF) according to the fact that there are different average gains of signal and noise. For the all-optical quadrature phase-shift keying (QPSK) regenerator as an example, the output OSNR is derived from the input OSNR and the total gain of the degraded QPSK signal. Our simulation shows that the OSNR results obtained by this method are in agreement with those calculated from the error vector magnitude (EVM) formula. The method presented here has good applicability for different data rates but is also useful for analyzing the OSNR degradation of other nonlinear devices in optical communication links.

scholarly journals Performance analysis of IEEE 802.11ac based WLAN in wireless communication systems

2019 ◽  
Vol 9 (2) ◽  
pp. 1131 ◽  
Author(s):  
A. Z. Yonis
Keyword(s):  
Communication Systems ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Multiple Input Multiple Output ◽  
Local Area ◽  
Area Network ◽  
Data Rates ◽  
Input Multiple Output ◽  
Ieee 802.11Ac ◽  
5 Ghz

<p><span lang="EN-US">IEEE 802.11ac based wireless local area network (WLAN) is emerging WiFi standard at 5 GHz, it is new gigabit-per-second standard providing premium services. IEEE 802.11ac accomplishes its crude speed increment by pushing on three distinct measurements firstly is more channel holding, expanded from a maximum of 80 MHz up to 160 MHz modes. Secondly, the denser modulation, now using 256-QAM, it has the ability to increase the data rates up to 7 Gbps using an 8×8 multiple input multiple output (MIMO). Finally, it provides high resolution for both narrow and medium bandwidth channels. This work presents a study to improve the performance of IEEE 802.11ac based WLAN system.</span></p>

scholarly journals Latency-Aware Offloading in Integrated Satellite Terrestrial Networks

2020 ◽  
Author(s):  
Wiem Abderrahim ◽  
Osama Amin ◽  
Mohamed-Slim Alouini ◽  
Basem Shihada
Keyword(s):  
Communication Networks ◽  
Rural Areas ◽  
Access Network ◽  
High Capacity ◽  
High Load ◽  
Traffic Load ◽  
Satellite Systems ◽  
High Data ◽  
Data Rates ◽  
Terrestrial Networks

Next-generation communication networks are expected to integrate newly-used technologies in a smart way to ensure continuous connectivity in rural areas and to alleviate the traffic load in dense regions. The prospective access network in 6G should hinge on satellite systems to take advantage of their wide coverage and high capacity. However, adopting satellites in 6G could be hindered because of the {additional latency introduced}, which is not tolerable by all traffic types. Therefore, we propose a traffic offloading scheme that integrates both the satellite and terrestrial networks to smartly allocate the traffic between them while satisfying different traffic requirements. Specifically, the proposed scheme offloads the Ultra-Reliable Low Latency Communication (URLLC) traffic to the terrestrial backhaul to satisfy its stringent latency requirement. However, it offloads the enhanced Mobile Broadband (eMBB) traffic to the satellite since eMBB needs high data rates but is not always sensitive to delay. Our scheme is shown to reduce the transmission delay of URLLC packets, decrease the number of dropped eMBB packets, and hence improve the network's availability. Our findings highlight that the inter-working between satellite and terrestrial networks is crucial to mitigate the expected high load on the limited terrestrial capacity.<br>

MIMO Detectors: A Comprehensive Performance Analysis

2021 ◽  
Vol 16 (3) ◽  
pp. 24-27
Author(s):  
E. Obi ◽  
B.O. Sadiq ◽  
O.S . Zakariyya ◽  
A. Theresa
Keyword(s):  
Error Rate ◽  
Mimo Systems ◽  
Signal To Noise Ratio ◽  
Minimum Mean Square Error ◽  
Multiple Input Multiple Output ◽  
Symbol Error Rate ◽  
Signal To Noise ◽  
High Data ◽  
Noise Ratio ◽  
Better Than

Multiple-input multiple-output (MIMO) systems are increasingly becoming popular due to their ability to multiply data rates without any expansion in the bandwidth. This is critical in this era of high-data rate applications but limited bandwidth. MIMO detectors play an important role in ensuring effective communication in such systems and as such the performance of the following are compared in this paper with respect to symbol error rate (SER) versus signal-to-noise ratio (SNR): maximum likelihood (ML), zero forcing (ZF), minimum mean square error (MMSE) and vertical Bell laboratories layered space time (VBLAST). Results showed that the ML has the best performance as it has the least Symbol Error Rate (SER) for all values of Signal to Noise Ratio (SNR) as it was 91.9% better than MMSE, 99.6% better than VBLAST and 99.8% better than ZF at 20db for a 2x2 antenna configuration., it can also be deduced that the performance increased with increase in number of antenna for all detectors except the V-BLAST detector.

Sign in / Sign up

Export Citation Format

Share Document