scholarly journals Studi Upah dan Beban Biaya Pekerja Konstruksi di Indonesia (Studi Kasus: Pekerja Konstruksi Gedung di Pulau Jawa)

2016 ◽  
Vol 22 (2) ◽  
pp. 87
Author(s):  
Srie Heruyani Stevia Lukmanasari ◽  
Biemo W Soemardi
Keyword(s):  
Data Processing ◽  
Research Method ◽  
Field Survey ◽  
Comparison Analysis ◽  
Related Research ◽  
Inductive Methods ◽  
Permanent Staff ◽  
Existing Data

Labor wages have a large portion (approximately 30%) of construction contract value. Therefore, company should pay attention to labor wages. Unfortunately, existing data about construction labor wages in Indonesian are only showed as daily wages (for labor) and monthly wages (for employee/permanent staff), while there’s no information about their labor burden. Therefore, objectives of this study are to identify the component and structure of construction labor burden and wages in Indonesia and also to identify all factors related. Research method used int this study are empirical and inductive methods. After all data has been collected from field survey, description of the construction labor burden and wages model was compiled into its components. Moreover, comparison analysis used to identify factors related to construction labor burden and wages. Results of data processing and analysis shows that: 1) Construction labor burden in Indonesia for both employee/permanent staff and labor commonly consist of direct and indirect payment, and conditional and lumpsum payment, but there are different distributions between each kind of labor. 2) Construction labor burden and wages in Indonesia commonly depend on company profile, project profile, and labor profile.

Is it worth doing fieldwork with this organisation? A method for considering context before conducting fieldwork research in Sport for development and peace.

2020 ◽  
Author(s):  
Tegwen Gadais ◽  
Laurie Décarpentrie ◽  
Andrew Webb ◽  
Marie Belle Ayoub ◽  
Mariann Bardocz-Bencsik ◽  
...  
Keyword(s):  
Sustainable Development ◽  
Research Method ◽  
Sustainable Development Goals ◽  
Field Work ◽  
Limited Resources ◽  
Limited Time ◽  
Sport For Development ◽  
Development Goals ◽  
The Cost ◽  
Existing Data

Much has been written about sport as a tool for development and peace. But more research on Sport for Development and Peace (SDP) organizations, is needed to better understand their actual contributions to the UNs sustainable development goals. Yet, the unstable, risky, and restricted contexts in which many NGOs and SDP agencies operate often leaves researchers struggling to find effective yet feasible methods through which to examine agencies in these fields. Indeed, conducting field work on and with SDP agency often implies allocating significant quantities of researcher’s limited time, funding, and other vital resources. And as limited resources need to be invested wisely, SDP researchers will clearly need to prepare their fieldwork. Nevertheless, there are but a handful of methodological papers that address the question of how to prepare for SDP field work. In other words, the question of how we know if it is worthwhile, and safe enough, to proceed with SDP field work remains. Building on previous research, the purpose of this study is to raise important ontological and epistemological questions about what can be known about a given context, before setting off on fieldwork. We further explore the use of the Actantial Model as a research method for analyzing existing data before deciding whether to conduct fieldwork in complex and frequently insecure situations. In other words, will the cost (material, temporal, financial, and physical) of conducting fieldwork be worth it? By applying the Actantial Model, with the specific aim of informing decisions regarding subsequent fieldwork, to one specific case, contributions regarding the pertinence of conducting fieldwork are provided.

scholarly journals SISTEM PENDUKUNG KEPUTUSAN PENENTUAN INVESTASI KELAPA SAWIT DENGAN METODE INTERNAL RATE OF RETURN DALAM SATU BLOCK SAWIT DI LINGGA KUAMANG BUNGO JAMBI

Compiler ◽  
2015 ◽  
Vol 4 (2) ◽  
Author(s):  
Bambang Sudibyo ◽  
Joko Suismianto
Keyword(s):  
Decision Support ◽  
Data Processing ◽  
Decision Support Systems ◽  
Palm Oil ◽  
Support Systems ◽  
Rate Of Return ◽  
Internal Rate Of Return ◽  
The Public ◽  
Internal Rate ◽  
Existing Data

ABSTRACTTechnology developed in order to facilitate human work that would not be done manually, with the presence of the latest technologies that it is not a work of man may not be done quickly, accurately, and save time. One was for the manufacture of palm data processing applications that provide an overview to the public that it is feasible to plant palm oil or not to do, based on existing data and then recycled into Decision Support Systems. To process these data using the Internal Rate Of Return (IRR) as a method to make decisions based on data that have been processed. In this study processed data is the data of a group of Palm Jl. Salak Linga Kuamang Bungo Jambi. From the results of the data managed by the farmer group Palm block 22, Jalan Salak, Linga Kuamang, with interpolation of 30% per year, with a capital of USD 888,253,000.00 and generate income of Rp 2,063,387,050.00 in if using the Internal rate of Return produce interpolation (I) of 30, 113%. Since IRR> I, then it is worth to continue.

scholarly journals EVALUASI REPRODUKSI INDUK KELINCI NEW ZEALAND PADA BERBAGAI PARITAS (Studi Kasus di UD. Alastika Jaya Desa Tulungrejo Kecamatan Gandusari Kabupaten Blitar)

2021 ◽  
Vol 13 (1) ◽  
pp. 23-28
Author(s):  
Iva Mardiani Fatimah ◽  
Nita Opi Ari kustanti ◽  
Edya Moelia Moeis
Keyword(s):  
Data Analysis ◽  
New Zealand ◽  
Litter Size ◽  
Research Method ◽  
Field Survey ◽  
Secondary Data ◽  
Average Value ◽  
Days Open ◽  
Size At Birth

The aim of this study is to find out reproctive performance of New Zealand doe in UD. Alastika Jaya. This study use 35 of 51 doe population as the sample and field survey to take primary and secondary data from observation and interview as the research method.  The result of observation and data analysis of study indicate that average value of service per conception (S/C), long of days open, gap of bred after whelped, interval of birth, litter size at birth, and litter size at weaning in a row is 2,17+0,57, 33,33+16,56 days, 32,6+22,14 days, 65,67+16,54 days, 6,65+2,54 kits, dan 4,24+2,05 kits

scholarly journals SANKSI KERJA SOSIAL, SEBUAH ALTERNATIF PENALISASI TERHADAP PELANGGARAN LALU LINTAS DI KOTA PAREPARE

2019 ◽  
Vol 2 (2) ◽  
pp. 102-128
Author(s):  
Firmansyah
Keyword(s):  
Social Work ◽  
Research Method ◽  
Field Survey ◽  
Legal Issues ◽  
Library Research ◽  
Litigation Process ◽  
Traffic Violations ◽  
The Creation ◽  
The Right ◽  
The Impact

Social work sanctions is an alternative in handling traffic violations without going through a litigation process, this research aims; First, to find out the right strategies related to social work sanctions. Second, to find out the factors that influence the implementation of social work sanctions and finally to find out the impact of the application of social work sanctions. The research method used is a socio-normative research method. Data collection techniques for library research and interviews. The results of this study indicate that the strategies is used in implementing social work sanctions are; Field survey, socialization Collaborate with the police to conduct sweeping on the object of research, carry out social / social work sanctions and install stickers to control and there needs to be a conscious area or traffic order. namely the existence of the concept of ultimum Remedium. It’s mean that criminal is the last step and the Discretion is a power or authority that is carried out based on the law for consideration and belief and emphasizes moral considerations rather than legal considerations. The inhibiting factors are; Written rules or regulations / substances that do not yet exist, lack of socialization and legal culture or attitudes of both the community and the police are still low regarding legal issues. Finally, the impact of the implementation is the creation of rules or laws that specifically regulate the issue of social work sanctions. The next thing is the creation of the Community Police Concept

PENGARUH KINERJA, MOTIVASI, DAN KOMPENSASI TERHADAP DISIPLIN KERJA OUSOUCING UNIT ATMRC PT BNI PERSERO TBK KANTOR WILAYAH PALEMBANG

2021 ◽  
Vol 2 (2) ◽  
pp. 223-234
Author(s):  
Gunawan Putrado ◽  
Fakhry Zamzam ◽  
Neny Rostiati
Keyword(s):  
Data Collection ◽  
Data Processing ◽  
Research Method ◽  
Field Data ◽  
Analysis Tool ◽  
Regional Office ◽  
Field Data Collection ◽  
Representative Office

The purpose of this study was to determine the effect, motivation and compensation on work discipline of employees of the Outsourcing Atmrc Unit of PT BNI Persero Tbk Palembang Regional Office partially or simultaneously. This research method uses survey and verification descriptives, field data collection uses questionnaires, interviews and documentation. This research is an associative research, where in this study there are variables that are related and can influence other variables. The population of this study were 62 employees of the BPKP Representative Office Auditor, South Sumatra Province. Data processing using SPSS 25 analysis tool. The results of the study stated that performance had an effect on work discipline, there was an effect of motivation on work discipline, compensation had an effect on work discipline. Performance, Motivation and Compensation affect Discipline simultaneously

Study of Incompleteness Medical Records of Inpatient in Appendicitis Cases at Dr. Reksodiwiryo Hospital Padang

2022 ◽  
Vol 2 (1) ◽  
pp. 39-44
Author(s):  
Nurhasanah Nasution
Keyword(s):  
Medical Record ◽  
Medical Records ◽  
Research Method ◽  
Digestive Surgery ◽  
Diagnostic Codes ◽  
Diagnosis Codes ◽  
Service Information ◽  
Incomplete Filling ◽  
Existing Data

Background: Incomplete filling of medical record files for inpatients at Dr. Reksodiwiryo hospital medical records will be describe health services and the quality of medical record services. Medical record quality services include the completeness of medical record files, accuracy in providing diagnosis and diagnosis codes, as well as speed in providing service information. The requirements for quality medical records must be accurate, complete, reliable, valid, timely, usable, common, comparable, guaranteed, and easy.Methods: This research method is a descriptive with a retrospective approach or looking at existing data. This study was carried out in September 2021. The population was 70 files cases of inpatient digestive surgery. Samples were taken from 27 files of inpatients with appendicitis cases.Results: From the research that has been done, the highest percentage of incomplete identification components is found on the gender item about 81.48%, the highest percentage of incomplete important report components is obtained on the medical resume and informed consent items about 11.1%. The highest percentage of incomplete authentication components was obtained in the nursing degree about 96.3%. The highest percentage of the components of the recording method was obtained by 59.3%, there are several blank sections about 16 files. The percentage of incomplete diagnostic codes and procedures is 100%  Conclusions: the researcher suggested that the hospital can have an Operational Standart on filling out the completeness of medical records files

Use of RFID in Supply Chain Data Processing

2008 ◽  
pp. 1184-1191
Author(s):  
Jan Owens ◽  
Suresh Chalasani ◽  
Jayavel Sounderpandian
Keyword(s):  
Supply Chain ◽  
Data Processing ◽  
Radio Frequency ◽  
Supply Chains ◽  
Radio Frequency Identification ◽  
Department Of Defense ◽  
Frequency Identification ◽  
Processing And Storage ◽  
And Storage ◽  
Existing Data

The use of Radio Frequency Identification (RFID) is becoming prevalent in supply chains, with large corporations such as Wal-Mart, Tesco, and the Department of Defense phasing in RFID requirements on their suppliers. The implementation of RFID can necessitate changes in the existing data models and will add to the demand for processing and storage capacities. This article discusses the implications of the RFID technology on data processing in supply chains.

A Paired Comparison Approach to Evaluating Interviewer Performance

1969 ◽  
Vol 6 (1) ◽  
pp. 66-70
Author(s):  
Purnell H. Benson
Keyword(s):  
Quality Control ◽  
Data Processing ◽  
Computer Program ◽  
Paired Comparison ◽  
Statistical Quality Control ◽  
Comparison Analysis ◽  
Statistical Quality ◽  
Comparison Approach

Paired comparison analysis, as developed in psychometric work, is applied to the problem of statistical quality control of interviewing. Data from telephone interviewing are analyzed. Details are given for preparing a computer program for data processing.

Inductive Estimation Arithmetic for Random Vibration Data

2011 ◽  
Vol 219-220 ◽  
pp. 1113-1116
Author(s):  
Yong Jie Zhang ◽  
Xiao Hu Zhang ◽  
Bin Tuan Wang
Keyword(s):  
Data Processing ◽  
Numerical Experiments ◽  
Random Vibration ◽  
Measured Data ◽  
Reliability Test ◽  
Vibration Data ◽  
Inductive Methods

The vibration data processing of environmental spectrum is an important part of environmental reliability test for the aircraft. Based on the inductive methods for environmental measured data of vibration, an inductive arithmetic is employed to estimate the random vibration data of aircraft surface in Matlab system. Numerical experiments show that the inductive estimation arithmetic is effective, reliable and applicable for the environmental measured data of random vibration.

scholarly journals Studi karakteristik gerusan lokal pada beberapa tipe pilar jembatan

2017 ◽  
Vol 12 (1) ◽  
pp. 89-104
Author(s):  
Sarwono Sarwono
Keyword(s):  
Research Method ◽  
Field Survey ◽  
Flow Direction ◽  
Discharge Rate ◽  
Physical Model Test ◽  
Sheet Pile ◽  
Flow Discharge ◽  
River Bed ◽  
Pile Type ◽  
Different Characteristics

The local scouringcharacteristicsuroundings several bridge pillars forms have a different characteristics, some forms of pillars of the bridge are considered optimum when equipped with the data: discharge, slope of riverbed, material, and on the same flow direction, that will produce the most shallow scouring. The objective of this study is to find the form of pillars that will generate the most superficial scouring. The study is conducted at the Laboratory of River in Surakarta. The used flume has length of 10.00 m, width 0.40 m and height of 0.40 m. The forms of pillar studied are two cylindrical pillars, sheet pile and full walls pillar. The slope of the riverbed (i) are varied, there are three: 0.006, 0.0125 and 0.020. The flow discharge rate there are five variations: 5,37 m3/s, 8,94 m3/s, 12,52 m3/s, 14,31 m3/s, 17,89 m3/s. Land was used at material for river bed, and, there are three kinds of value D50: 0.60 mm, 0.80 mm and 1.00 mm. The research method includes: a field survey, two dimension physical model test with 1:20 scale.The results showed for each pillar shapes have different characters. The deepest scouring suroundings the pillar beside the point, at the beginning of the first minute to the 20th minute in a sudden deep scour the riverbed and form of river bed suroundings are the pillars up and down irregularly. In the 20th minute until the end of the stream scouring decreased almost linearly lines are horizontzl. In general the pile type pillars was found to cause the minimum scouring than other pillar shapes.

Sign in / Sign up

Export Citation Format

Share Document