Dispersion, mechanical and thermal properties of nano graphite platelets reinforced flouroelastomer composites

e-Polymers ◽  
2008 ◽  
Vol 8 (1) ◽  
Author(s):  
Deng Xu ◽  
V. Sridhar ◽  
Thanh Tu Pham ◽  
Jin Kuk Kim
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Tensile Strength ◽  
Thermal Properties ◽  
Thermogravimetric Analysis ◽  
Fracture Surface ◽  
Exfoliated Graphite ◽  
Mechanical And Thermal Properties ◽  
Reinforcing Fillers ◽  
Processing Of Composites

AbstractThe potential of exfoliated graphite nano platelets (xGnP™) as reinforcing fillers in flouroelastomer has been investigated. The dispersion of the nano graphite platelets in the polymer matrix has been investigated by WAXD, SEM, TEM, EPMA and AFM. WAXD studies indicated that the processing of composites did not change the inter-gallery distance (d-spacing) of the graphite platelets. The effect of increasing nano graphite loadings on mechanical properties like tensile strength, modulus and tear resistance has been studied. Formation of weld lines on the fracture surface of the composite has been observed by SEM. The thermal stability was determined using thermogravimetric analysis. The composites showed higher thermal stability in comparison with nonreinforced polymer.

scholarly journals Polypropylene/Graphene Nanocomposites: Effects of GNP Loading and Compatibilizers on the Mechanical and Thermal Properties

Materials ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 3924 ◽  
Author(s):  
Mohammad A. Al-Saleh ◽  
Abdirahman A. Yussuf ◽  
Salah Al-Enezi ◽  
Roaya Kazemi ◽  
Mat Uzir Wahit ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Tensile Strength ◽  
Thermal Properties ◽  
Maleic Anhydride ◽  
Melting Temperature ◽  
Significant Influence ◽  
Research Work ◽  
Mechanical And Thermal Properties ◽  
Scanning Calorimetry

In this research work, graphene nanoplatelets (GNP) were selected as alternative reinforcing nanofillers to enhance the properties of polypropylene (PP) using different compatibilizers called polypropylene grafted maleic anhydride (PP-g-MA) and ethylene-octene elastomer grafted maleic anhydride (POE-g-MA). A twin screw extruder was used to compound PP, GNP, and either the PP-g-MA or POE-g-MA compatibilizer. The effect of GNP loading on mechanical and thermal properties of neat PP was investigated. Furthermore, the influence and performance of different compatibilizers on the final properties, such as mechanical and thermal, were discussed and reported. Tensile, flexural, impact, melting temperature, crystallization temperature, and thermal stability were evaluated by using a universal testing system, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). For mechanical properties, it was found that increasing GNP content from 1 wt.% to 5 wt.% increased tensile strength of the neat PP up to 4 MPa. The influence of compatibilizers on the mechanical properties had been discussed and reported. For instance, the addition of PP-g-MA compatibilizer improved tensile strength of neat PP with GNP loading. However, the addition of compatibilizer POE-g-MA slightly decreased the tensile strength of neat PP. A similar trend of behavior was observed for flexural strength. For thermal properties, it was found that both GNP loading and compatibilizers have no significant influence on both crystallization and melting temperature of neat PP. For thermal stability, however, it was found that increasing the GNP loading had a significant influence on improving the thermal behavior of neat PP. Furthermore, the addition of compatibilizers into the PP/GNP nanocomposite had slightly improved the thermal stability of neat PP.

MECHANICAL AND THERMAL PROPERTIES OF SAWDUST CONCRETE

2017 ◽  
Vol 79 (6) ◽  
Author(s):  
Ruhal Pervez Memon ◽  
Abdul Rahman Mohd. Sam ◽  
A. S. M. Abdul Awal ◽  
Lemar Achekzai
Keyword(s):  
Heat Transfer ◽  
Mechanical Properties ◽  
Tensile Strength ◽  
Thermal Properties ◽  
Lightweight Concrete ◽  
Physical And Mechanical Properties ◽  
Developing Nations ◽  
Mechanical And Thermal Properties ◽  
Construction Technology ◽  
Long Duration

 Industrialization in developing countries has resulted in an increase in agricultural output and consequent accumulation of unmanageable agro wastes. Pollution arising from such wastes is a matter of concern for many developing nations. The aim of this study is to investigate the behavior of lightweight concrete and the utilization of sawdust as waste material in concrete. This paper focuses on the manufacturing of concrete which possess long duration heat transfer by using sawdust waste. In this research, cement to sawdust ratio of 1:1, 1:2 and 1:3 by volume was prepared for sawdust concrete, and the ratio of sand was kept constant that is 1. At these ratios, the mechanical and thermal properties like density, workability, strength and heat transfer were measured after, 7, 28 and 56 days of air curing. The tests results show that with the increase in the amount of sawdust, the workability, compressive strength, tensile strength and flexural strength decreased. It also resulted in reduction of heat transfer of sawdust concrete. Taking into account the overall physical and mechanical properties, sawdust concrete can be used in construction technology. 

Effect of chain extender on the mechanical and thermal resistance properties of polyurethane liners for composite propellants

Polyurethanes ◽  
2016 ◽  
Vol 1 (1) ◽  
Author(s):  
P. Ross ◽  
G. Sevilla ◽  
J. Quagliano
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Thermal Properties ◽  
Chain Extender ◽  
Molecular Structures ◽  
Polymer Chains ◽  
Mechanical And Thermal Properties ◽  
Thermal Changes ◽  
Ft Ir ◽  
Chain Lengths

AbstractPolyurethane formulations utilized as liners for composite propellants were prepared by the reaction of toluene-2,4-diisocyanate (TDI) and isophorone diisocyanate (IPDI) with hydroxyl terminated polybutadiene (HTPB), while polymer chains were further extended with neopentyl glycol diol, NPG triol and two different triols (monoglyceryl ricinoleate, MRG and trimethylolpropane, TMP). Liners were formulated with micronized titanium dioxide mechanically dispersed in hydroxyl-terminated polybutadiene (HTPB). The molecular structures of liners were confirmed by FT-IR. Thermal properties indicated that the nature of chain extender (crosslinker) only slightly affected the temperatures for decomposition of liners. Two main thermal changes were found at 370∘C and another at around 440–500∘C, depending on the chain extender utilized. On the other side, mechanical properties varied within the range of 0,7-1,8 MPa, consistent with this kind of elastomers. Tensile strength at break was only significantly affected with TMP and MRG-chain extended liners at the lowest concentrations tested of 1,3 and 2% (w/w), respectively. However, the behaviour depended on whether TDI or IPDI isocyanate was utilized for curing. TMP 1,3% crosslinked liner cured with TDI had a tensile strength of 1,82MPa whileMRG-crosslinked liner cured with IPDI had a tensile strength of 1,56 MPa. It was observed that at the higher NCO/OH ratios essayed, tensile strength and hardness increased, improving mechanical properties. Our results confirmed that TMP and MRG triols together with NPG diols can be used to tailor mechanical and thermal properties of liners, considering their different hydroxyl functionalities and chain lengths.

Polybutadiene rubber/exfoliated graphite nanocomposites: Impact of filler on the thermal, mechanical and permeability characteristics

2019 ◽  
Vol 35 (3) ◽  
pp. 138-148
Author(s):  
Soney C George ◽  
Jiji Abraham ◽  
Thomasukutty Jose ◽  
Riya Thomas ◽  
Teresa Jacob ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Thermal Properties ◽  
Structural Characteristics ◽  
Nitrogen Atmosphere ◽  
Exfoliated Graphite ◽  
Melt Mixing ◽  
Permeability Characteristics ◽  
Polybutadiene Rubber ◽  
Permeation Studies

In this report, we demonstrate that both mechanical behaviour and thermal stability of polybutadiene rubber (PBR) nanocomposites could be improved by incorporating exfoliated graphite (EG) using melt mixing method. Incorporation of the filler EG in the polybutadiene (PBD) matrix is confirmed by infrared spectra and X-ray diffraction analysis. The structural characteristics, mechanical properties and thermal properties of these newly modified PBR nanocomposites were systematically analysed and studied. Thermal properties of the nanocomposites were studied using thermogravimetric analysis under nitrogen atmosphere. Thermogravimetric studies showed that PBR8 is having higher thermal stability than that of the PBR gum sample. Mechanical properties like tensile strength, Young’s modulus, tear strength, hardness and compression set of the nanocomposites were studied. Mechanical properties are also high for the modified PBR nanocomposites with maximum filler content. The permeability of organic vapours such as dichloromethane (CH2Cl2), chloroform (CHCl3) and carbon tetrachloride (CCl4) through PBR/EG nanocomposites was also studied. In vapour permeation studies, PBR4 exhibits the least permeability in CH2Cl2, CHCl3 and CCl4 solvents. Polybutadiene rubber–natural graphite (PBR/NG) nanocomposites were also prepared for comparison.

scholarly journals Mechanical and Thermal Properties of Montmorillonite-Reinforced Polypropylene/Rice Husk Hybrid Nanocomposites

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1557 ◽  
Author(s):  
Khaliq Majeed ◽  
Ashfaq Ahmed ◽  
Muhammad Saifullah Abu Bakar ◽  
Teuku Meurah Indra Mahlia ◽  
Naheed Saba ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Thermal Properties ◽  
Rice Husk ◽  
Hybrid Nanocomposites ◽  
Commercial Application ◽  
Mechanical And Thermal Properties ◽  
Melt Mixing ◽  
Compatibilizing Agent ◽  
Thermal Stability Of

In recent years, there has been considerable interest in the use of natural fibers as potential reinforcing fillers in polymer composites despite their hydrophilicity, which limits their widespread commercial application. The present study explored the fabrication of nanocomposites by melt mixing, using an internal mixer followed by a compression molding technique, and incorporating rice husk (RH) as a renewable natural filler, montmorillonite (MMT) nanoclay as water-resistant reinforcing nanoparticles, and polypropylene-grafted maleic anhydride (PP-g-MAH) as a compatibilizing agent. To correlate the effect of MMT delamination and MMT/RH dispersion in the composites, the mechanical and thermal properties of the composites were studied. XRD analysis revealed delamination of MMT platelets due to an increase in their interlayer spacing, and SEM micrographs indicated improved dispersion of the filler(s) from the use of compatibilizers. The mechanical properties were improved by the incorporation of MMT into the PP/RH system and the reinforcing effect was remarkable as a result of the use of compatibilizing agent. Prolonged water exposure of the prepared samples decreased their tensile and flexural properties. Interestingly, the maximum decrease was observed for PP/RH composites and the minimum was for MMT-reinforced and PP-g-MAH-compatibilized PP/RH composites. DSC results revealed an increase in crystallinity with the addition of filler(s), while the melting and crystallization temperatures remained unaltered. TGA revealed that MMT addition and its delamination in the composite systems improved the thermal stability of the developed nanocomposites. Overall, we conclude that MMT nanoclay is an effective water-resistant reinforcing nanoparticle that enhances the durability, mechanical properties, and thermal stability of composites.

Novel Biobased Materials from Tung Oil-Based Monomer and Tung Oil-Modified Unsaturated Polyester

2012 ◽  
Vol 581-582 ◽  
pp. 121-124
Author(s):  
Cheng Guo Liu ◽  
Yong Hong Zhou ◽  
Li Hong Hu
Keyword(s):  
Thermal Stability ◽  
Thermal Properties ◽  
Thermogravimetric Analysis ◽  
Polymer Matrix ◽  
Unsaturated Polyester ◽  
Mechanical And Thermal Properties ◽  
Tung Oil ◽  
Biobased Materials

Two kinds of novel biobased materials were obtained by copolymerization of tung oil -based monomer (TOPERMA) or tung oil-modified unsaturated polyester (UPE-TO) with styrene. Mechanical and thermal properties of the two TO-based biopolymers were presented and compared. It was shown that the UPE-TO polymer matrix showed better toughness than the pure unsaturated polyester (UPE) matrix, while the TOPERMA polymer matrix had better thermal stability than the UPE-TO and the pure UPE matrixes by thermogravimetric analysis (TGA). These tung oil-based polymers show promise as an alternative to replace petroleum-based materials.

Study of Wood Plastic Composites on Mechanical and Thermal Properties after Immersed into Water

2014 ◽  
Vol 1004-1005 ◽  
pp. 497-500
Author(s):  
Wang Wang Yu ◽  
Dong Xue
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Thermal Properties ◽  
High Density Polyethylene ◽  
Nucleating Agent ◽  
Mechanical And Thermal Properties ◽  
Wood Plastic Composites ◽  
Plastic Composites ◽  
Before And After ◽  
Negative Effect

In this study, silvergrass (SV) reinforced high density polyethylene (HDPE) composites were prepared. The effects of slivergrass fibers (SV) content on the mechanical properties, crystalline properties of wood plastic composites (WPCs) before and after water absorption were investigated. It was found that compared with the untreated WPCs after immersed into water, the tensile strength of PMDI treated composites were higher. Silvergrass can be the nucleating agent with treated by PMDI. The Xc of PMDI treated WPCs after immersed into water was also increased. However, this improved Xc has negative effect on mechanical properties.

Effect of Blend Ratio on the Mechanical and Thermal Properties of Polyurethane/Silicone Rubber Conductive Material

2018 ◽  
Vol 280 ◽  
pp. 264-269
Author(s):  
Heng Chun Wei ◽  
Teh Pei Leng ◽  
Yeoh Chow Keat
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Thermal Properties ◽  
Silicone Rubber ◽  
Conductive Filler ◽  
Material Testing ◽  
Testing System ◽  
Mechanical And Thermal Properties ◽  
Blend Ratio ◽  
Thermal Stability Of

This work reports on mechanical and thermal properties of a novel polymer blend. Blends were prepared by mixing silicone rubber with diphenyl – 4,4 – dissocyanate in different ratios. Graphene nanoplatelets was added as conductive filler to improve the electrical conductivity of the blends. The mechanical properties, including tensile and tear performances were measured by a material testing system. The thermal stability of the blends was measured by thermogravimetric analysis. Incorporation 20 vol.% of silicone rubber can help to improve the thermal stability of the blend, meanwhile optimum mechanical properties of the blends is achieved.

Improvement Properties of Recycled Polypropylene by Reinforcement of Coir Fiber

2009 ◽  
Vol 79-82 ◽  
pp. 2027-2030 ◽  
Author(s):  
Poonsub Threepopnatkul ◽  
Chanin Kulsetthanchalee ◽  
K. Bunmee ◽  
N. Kliaklom ◽  
W. Roddouyboon
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Thermal Properties ◽  
Testing Machine ◽  
Fiber Composites ◽  
Fiber Content ◽  
Mechanical And Thermal Properties ◽  
Gravimetric Analysis ◽  
Coir Fiber ◽  
Recycled Polypropylene

This research was to study the related mechanical and thermal properties of recycled polypropylene from post consumer containers reinforced with coir fiber. Surface of coir fiber was treated with sodium hydroxide to remove lignin and hemicelluloses and likely to improve the interfacial adhesion in the composites. The composites of treated coir fiber and recycled polypropylene were prepared by varying the coir fiber contents at 5%, 10% and 20% by weight using a twin screw extruder. The thermal properties were investigated by thermal gravimetric analysis (TGA) and differential scanning calorimeter (DSC). The results from TGA showed that thermal stability of the composites was lower than that of recycled polypropylene resin and thermal stability decreased with increasing coir fiber content. From DSC results, it indicated that the crystallinity of treated coir fiber composites increased as a function of fiber content. The mechanical properties of injection-molded samples were studied by universal testing machine. The treated coir fiber composites produced enhanced mechanical properties. The tensile strength, tensile modulus and impact strength of modified coir fiber/recycled polypropylene composites increased as a function of coir fiber content.

Sign in / Sign up

Export Citation Format

Share Document