scholarly journals Ideal pH for the adsorption of metal ions Cr6+, Ni2+, Pb2+ in aqueous solution with different adsorbent materials

2021 ◽  
Vol 6 (1) ◽  
pp. 115-123
Author(s):  
Luísa P. Cruz-Lopes ◽  
Morgana Macena ◽  
Bruno Esteves ◽  
Raquel P. F. Guiné
Keyword(s):  
Heavy Metals ◽  
Metal Ions ◽  
Walnut Shell ◽  
Lead Adsorption ◽  
Viable Solution ◽  
Chestnut Shell ◽  
Adsorption Processes ◽  
Irreversible Effects ◽  
Optimal Values ◽  
Ph Range

Abstract Industrialization increases the number of heavy metals released into the environment. Lead (Pb2+), nickel (Ni2+) and chromium (Cr6+) are among these toxic metals and cause irreversible effects on ecosystems and human health due to their bio-accumulative potential. The decontamination through adsorption processes using lignocellulosic wastes from agricultural and/or forestry processes is a viable solution. Hence, this work aimed at studying the effect of pH on the biosorption of the metal ions using four different by-product materials: walnut shell, chestnut shell, pinewood and burnt pinewood. These experiments were conducted with solutions of the three heavy metals in which the adsorbents were immersed to measure the rate of adsorption. A range of pH values from 3.0 to 7.5 was used in the experiments, and the concentrations were determined by atomic absorption. The results showed different behaviour of the biosorbent materials when applied to the different metals. The lead adsorption had an ideal pH in the range of 5.5–7.5 when the walnut shell was used as an adsorbent, corresponding to values of adsorption greater than 90%, but for the other materials, maximum adsorption occurred for a pH of 7.5. For the adsorption of chromium, the pH was very heterogeneous with all adsorbents, with optimal values of pH varying from 3.0 (for chestnut shell) to 6.5 (for walnut shell and wood). For nickel, the best pH range was around pH 5, with different values according to the lignocellulosic material used. These results indicate that the tested biosorbents have the potential to decontaminate wastewater in variable extensions and that by controlling the pH of the solution; a more efficient removal of the heavy metals can be achieved.

Efficient Preconcentration of Cu2+, Zn2+ and Fe3+ with an Agarose-Schiff Base Sorbent

2007 ◽  
Vol 72 (7) ◽  
pp. 908-916 ◽  
Author(s):  
Payman Hashemi ◽  
Hatam Hassanvand ◽  
Hossain Naeimi
Keyword(s):  
Schiff Base ◽  
Metal Ions ◽  
Metal Ion ◽  
Good Accuracy ◽  
Kinetic Studies ◽  
Sample Volume ◽  
Effects Of Ph ◽  
Glass Column ◽  
High Concentrations ◽  
Ph Range

Sorption and preconcentration of Cu2+, Zn2+ and Fe3+ on a salen-type Schiff base, 2,2'- [ethane-1,2-diylbis(nitrilomethylidyne)]bis(2-methylphenol), chemically immobilized on a highly crosslinked agarose support, were studied. Kinetic studies showed higher sorption rates of Cu2+ and Fe3+ in comparison with Zn2+. Half-times (t1/2) of 31, 106 and 58 s were obtained for sorption of Cu2+, Zn2+ and Fe3+ by the sorbent, respectively. Effects of pH, eluent concentration and volume, ionic strength, buffer concentration, sample volume and interferences on the recovery of the metal ions were investigated. A 5-ml portion of 0.4 M HCl solution was sufficient for quantitative elution of the metal ions from 0.5 ml of the sorbent packed in a 6.5 mm i.d. glass column. Quantitative recoveries were obtained in a pH range 5.5-6.5 for all the analytes. The volumes to be concentrated exceeding 500 ml, ionic strengths as high as 0.5 mol l-1, and acetate buffer concentrations up to 0.3 mol l-1 for Zn2+ and 0.4 mol l-1 for Cu2+ and Fe3+ did not have any significant effect on the recoveries. The system tolerated relatively high concentrations of diverse ions. Preconcentration factors up to 100 and detection limits of 0.31, 0.16 and 1.73 μg l-1 were obtained for Cu2+, Zn2+ and Fe3+, respectively, for their determination by a flame AAS instrument. The method was successfully applied to the metal ion determinations in several river water samples with good accuracy.

scholarly journals Stormwater Runoff Treatment Using Pervious Concrete Modified with Various Nanomaterials: A Comprehensive Review

2021 ◽  
Vol 13 (15) ◽  
pp. 8552
Author(s):  
Vahid Alimohammadi ◽  
Mehdi Maghfouri ◽  
Delaram Nourmohammadi ◽  
Pejman Azarsa ◽  
Rishi Gupta ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Compressive Strength ◽  
Adsorption Capacity ◽  
Removal Rate ◽  
Stormwater Runoff ◽  
Infiltration Rate ◽  
Stormwater Treatment ◽  
Adsorption Mechanisms ◽  
Wide Range ◽  
Adsorption Processes

Clean water is a vital need for all living creatures during their lifespan. However, contaminated stormwater is a major issue around the globe. A wide range of contaminants, including heavy metals, organic and inorganic impurities, has been discovered in stormwater. Some commonly utilized methods, such as biological, physical and chemical procedures, have been considered to overcome these issues. However, these current approaches result in moderate to low contaminant removal efficiencies for certain classes of contaminants. Of late, filtration and adsorption processes have become more featured in permeable concretes (PCs) for the treatment of stormwater. As nanoparticles have vast potential and unique characterizations, such as a higher surface area to cure polluted stormwater, employing them to improve permeable concretes’ capabilities in stormwater treatment systems is an effective way to increase filtration and adsorption mechanisms. The present study reviews the removal rate of different stormwater contaminants such as heavy metals, organic and other pollutants using nanoparticle-improved PC. The application of different kinds of nanomaterials in PC as porous media to investigate their influences on the properties of PC, including the permeability rate, compressive strength, adsorption capacity and mix design of such concrete, was also studied. The findings of this review show that different types of nanomaterials improve the removal efficiency, compressive strength and adsorption capacity and decrease the infiltration rate of PC during the stormwater treatment process. With regard to the lack of comprehensive investigation concerning the use of nanomaterials in PC to treat polluted stormwater runoff, this study reviews 242 published articles on the removal rate of different stormwater contaminants by using PC improved with nanoparticles.

scholarly journals The Role of the Disulfide Bridge in the Copper (II) Binding by the Cyclic His4-Peptide

2021 ◽  
Vol 22 (12) ◽  
pp. 6458
Author(s):  
Aleksandra Pieniężna ◽  
Weronika Witak ◽  
Aneta Szymańska ◽  
Justyna Brasuń
Keyword(s):  
Metal Ions ◽  
Coordination Mode ◽  
Transition Metal Ions ◽  
Disulfide Bridge ◽  
Chain Flexibility ◽  
Vis Spectroscopy ◽  
Ph Range ◽  
Cd Studies ◽  
Metal Ratios

In this paper, we present studies on the influence of the disulfide bridge on the copper (II) ions’ binding abilities by the cyclic His4-peptide. The studied ligand HKHPHRHC-S-S-C consists of nine amino acids. The cyclic structure was obtained through a disulfide bridge between two cysteinyl groups. Moreover, this peptide is characterized by the presence of four His residues in the sequence, which makes it an interesting ligand for transition metal ions. The potentiometric and spectroscopic (UV-Vis spectroscopy and circular dichroism spectroscopy (CD)) studies were carried out in various molar ligand to metal ratios: 2:1, 1:1, and 1:2, in the pH range of 2.5–11 at 25 °C. The results showed that the cyclic His4-peptide promotes dinuclear complexes in each of these systems and forms the final dinuclear species with the {NIm, 3N-amide}{NIm, 3N-amide} coordination mode. The obtained data shows that cyclization by the formation of the disulfide bond has an impact on the peptide chain flexibility and appearance of additional potential donors for metal ions and influences the copper (II) ions’ coordination.

scholarly journals Removal of Chromium(III) and Cadmium(II) Heavy Metal Ions from Aqueous Solutions Using Treated Date Seeds: An Eco-Friendly Method

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3718
Author(s):  
Mohammad Azam ◽  
Saikh Mohammad Wabaidur ◽  
Mohammad Rizwan Khan ◽  
Saud I. Al-Resayes ◽  
Mohammad Shahidul Islam
Keyword(s):  
Metal Ions ◽  
Adsorption Capacity ◽  
Low Cost ◽  
Maximum Adsorption Capacity ◽  
Solution Ph ◽  
Surface Analysis Techniques ◽  
Adsorption Processes ◽  
Ft Ir ◽  
Metal Elution ◽  
Date Pits

The aim of the research was to prepare low-cost adsorbents, including raw date pits and chemically treated date pits, and to apply these materials to investigate the adsorption behavior of Cr(III) and Cd(II) ions from wastewater. The prepared materials were characterized using SEM, FT-IR and BET surface analysis techniques for investigating the surface morphology, particle size, pore size and surface functionalities of the materials. A series of adsorption processes was conducted in a batch system and optimized by investigating various parameters such as solution pH, contact time, initial metal concentrations and adsorbent dosage. The optimum pH for achieving maximum adsorption capacity was found to be approximately 7.8. The determination of metal ions was conducted using atomic adsorption spectrometry. The experimental results were fitted using isotherm Langmuir and Freundlich equations, and maximum monolayer adsorption capacities for Cr(III) and Cd(II) at 323 K were 1428.5 and 1302.0 mg/g (treated majdool date pits adsorbent) and 1228.5 and 1182.0 mg/g (treated sagai date pits adsorbent), respectively. It was found that the adsorption capacity of H2O2-treated date pits was higher than that of untreated DP. Recovery studies showed maximal metal elution with 0.1 M HCl for all the adsorbents. An 83.3–88.2% and 81.8–86.8% drop in Cr(III) and Cd(II) adsorption, respectively, were found after the five regeneration cycles. The results showed that the Langmuir model gave slightly better results than the Freundlich model for the untreated and treated date pits. Hence, the results demonstrated that the prepared materials could be a low-cost and eco-friendly choice for the remediation of Cr(III) and Cd(II) contaminants from an aqueous solution.

Removal of Heavy Metals from Aqueous Solution by Hydroxyapatite/Chitosan Composite

2013 ◽  
Vol 789 ◽  
pp. 176-179 ◽  
Author(s):  
Eny Kusrini ◽  
Nofrijon Sofyan ◽  
Dwi Marta Nurjaya ◽  
Santoso Santoso ◽  
Dewi Tristantini
Keyword(s):  
Heavy Metals ◽  
Aqueous Solution ◽  
Metal Ions ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Removal Of Heavy Metals ◽  
Sem Micrograph ◽  
Pseudo Second Order ◽  
Chitosan Composite

Hydroxyapatite/chitosan (HApC) composite has been prepared by precipitation method and used for removal of heavy metals (Cr6+, Zn2+and Cd2+) from aqueous solution. The HAp and 3H7C composite with HAp:chitosan ratio of 3:7 (wt%) were characterized by Fourier transform infrared spectroscopy, X-ray diffraction and scanning electron microscopy-energy dispersive X-ray spectroscopy. The SEM results showed that HAp is spherical-shaped and crystalline, while chitosan has a flat structure. SEM micrograph of 3H7C composite reveals crystalline of HAp uniformly spread over the surface of chitosan. The crystal structure of HAp is maintained in 3H7C composite. Chitosan affects the adsorption capacity of HAp for heavy metal ions; it binds the metal ions as well as HAp. The kinetic data was best described by the pseudo-second order. Surface adsorption and intraparticle diffusion take place in the mechanism of adsorption process. The binding of HAp powder with chitosan made the capability of composite to removal of Cr6+, Zn2+and Cd2+from aqueous solution effective. The order of removal efficiency (Cr6+> Cd2+> Zn2+) was observed.

Study on desorption of Mn, Fe, and Mg from TMP and evaluation of the complexing strength of different chelating agents using side reaction coefficients 10th EWLP, Stockholm, Sweden, August 25–28, 2008

Holzforschung ◽  
2009 ◽  
Vol 63 (6) ◽  
Author(s):  
Kim Granholm ◽  
Pingping Su ◽  
Leo Harju ◽  
Ari Ivaska
Keyword(s):  
Citric Acid ◽  
Metal Ions ◽  
Chelating Agents ◽  
Side Reaction ◽  
Sodium Dithionite ◽  
Thermomechanical Pulp ◽  
Peroxide Bleaching ◽  
Ph Values ◽  
Reducing Environment ◽  
Ph Range

Abstract Chelation of thermomechanical pulp (TMP) was studied in this work. The desorption of Mn, Fe, and Mg due to their impact on peroxide bleaching was investigated. The desorption experiments were performed with EDTA, citric acid, oxalic acid, and formic acid as chelating agents at different pH. Chelation experiments with EDTA were carried out at pH 3–11. Sodium dithionite was used as the reducing agent in studying chelation with EDTA in a reducing environment. Mn was very effectively desorbed with EDTA from TMP at pH <10 and the reducing environment further improved the removal of all the studied metal ions from TMP with EDTA. Citric acid also removed Mn effectively from TMP at pH 5. The thermodynamic stability constants of different metal chelates do not present the correct picture of how strongly the metal ions are bound by the chelating agents in different conditions. But by means of the side reaction coefficients (α M(L)-coefficients) it is also theoretically possible to evaluate and compare the real binding strengths between the metal ions and different chelating agents at varying pH values and other solution conditions. In this study, a theory is given for the calculation of side reaction coefficients. Values of the α M(L)-coefficients, for the pH range 0–14, are presented for EDTA, DTPA, and also for some other new potential environmentally friendly chelating agents.

Why do zeolites induce an unprecedented electronic state on exchanged metal ions?

2017 ◽  
Vol 19 (36) ◽  
pp. 25105-25114 ◽  
Author(s):  
Akira Oda ◽  
Takahiro Ohkubo ◽  
Takashi Yumura ◽  
Hisayoshi Kobayashi ◽  
Yasushige Kuroda
Keyword(s):  
Metal Ions ◽  
Electronic State ◽  
Base Metal ◽  
Metal Ion ◽  
High Efficiency ◽  
Lewis Base ◽  
Mfi Zeolite ◽  
Adsorption Processes ◽  
Exact Position

Understanding the exact position and the detailed role of the Al array in zeolites is essential for elucidating the origin of unique properties and for designing zeolite materials with high efficiency in catalytic and adsorption processes. In this work, we advanced pivotal roles of Lewis base–metal ion bifunctionality caused by Al atoms arrayed circumferentially in the MFI-zeolite pores.

Evaluation of adsorption processes of metal ions in multi-element aqueous systems by lignocellulosic adsorbents applying different isotherms: A critical review

2019 ◽  
Vol 357 ◽  
pp. 404-420 ◽  
Author(s):  
Jordan Brizi Neris ◽  
Francisco Heriberto Martinez Luzardo ◽  
Erik Galvão Paranhos da Silva ◽  
Fermin Garcia Velasco
Keyword(s):  
Metal Ions ◽  
Critical Review ◽  
Aqueous Systems ◽  
Adsorption Processes

Use of bentonite to control the release of copper from contaminated soils

Soil Research ◽  
2007 ◽  
Vol 45 (8) ◽  
pp. 618 ◽  
Author(s):  
Wanting Ling ◽  
Qing Shen ◽  
Yanzheng Gao ◽  
Xiaohong Gu ◽  
Zhipeng Yang
Keyword(s):  
Heavy Metals ◽  
Sorption Capacity ◽  
Contaminated Soils ◽  
Montmorillonite Clay ◽  
Maximum Sorption Capacity ◽  
Maximum Sorption ◽  
Wide Ph Range ◽  
Ph Dependent ◽  
Ph Range ◽  
Soil Ageing

A decrease in release and availability of heavy metals in soil has been of worldwide interest in recent years. Bentonite is a type of expandable montmorillonite clay, and has strong sorption for heavy metals. In this work, the control of amended bentonite on the release of copper (Cu2+) from spiked soils was investigated using a batch equilibrium technique. Sorption of Cu by bentonite was pH-dependent, and could be well described using the Langmiur model. Maximum sorption capacity of the bentonite used in this study was 5.4 mg/g, which was much greater than soils reported in the literature. The extent of Cu2+ release from spiked soils was correlated with slurry concentrations, pH, and soil ageing process. In all cases, the amendment of bentonite was observed to effectively decrease the release of Cu2+ from soils. The apparent aqueous concentrations of Cu2+ released from soils devoid of bentonite treatment were 113–1160% higher than those from the soils amended with bentonite. Moreover, the magnitude of Cu2+ release decreased with increasing amount of bentonite added to soils. The bentonite added was more effective in retaining Cu2+ in sorbents for aged contaminated soils. Such enhanced retention resulting from the presence of bentonite was observed within a wide pH range from 2.5 to 7.0. Bentonite, as one of the most abundant minerals in soils, is regarded to improve the soil overall quality. The results obtained from this work provide useful information on utilisation of bentonite to control the release of heavy metals from contaminated soils.

scholarly journals Removal of Chromium and Nickel from Electroplating Wastewater Using Magnetite Particulate Adsorbent: (1) Effect of pH, Contact Time and Dosage, (2) Adsorption Isotherms and Kinetics

2016 ◽  
Vol 10 (7) ◽  
pp. 222 ◽  
Author(s):  
Donatus Dube ◽  
Champaklal T. Parekh ◽  
Bothwell Nyoni
Keyword(s):  
Metal Ions ◽  
City Council ◽  
Optimum Process ◽  
Order Kinetic ◽  
Heavy Load ◽  
Nickel Ions ◽  
Wide Range ◽  
Adsorption Processes ◽  
Wastewater Samples ◽  
Electroplating Process

Wastewater discharged into municipal sewer systems from electroplating process plants contains a heavy load of metal ions and often requires pre-discharge treatment. Treatment of wastewater to reduce the concentration of metal ions employing an adsorption process has been studied using a wide range of adsorbents. In this work, the concentrations of chromium and nickel ions in wastewater samples from a local electroplating shop were found to be above the limits set out by the Bulawayo City Council, and the Environmental Management Agency, a statutory agency under the Ministry of Environment and Tourism, Government of Zimbabwe. Furthermore, the removal of chromium and nickel ions from the wastewater using magnetite as an adsorbent is studied. Magnetite particulate adsorbent used in this experiment has demonstrated to be an effective adsorbent material. At the optimum process operating pH of 4 – 7 the absorbent was able to achieve removal rates of up to 99% for chromium and 98% for nickel. The adsorption processes for chromium and nickel have been proven to be physical in nature using the Dubinin-Radushkevich isotherm model. Also, the adsorption kinetics data fit well with pseudo second-order kinetic model.

Sign in / Sign up

Export Citation Format

Share Document