scholarly journals Conversion of an existing electrostatic precipitator casing to Pulse Jet Fabric filter in fossil power plants

DYNA ◽  
2016 ◽  
Vol 83 (195) ◽  
pp. 189-197 ◽  
Author(s):  
Francisco Manzano-Agugliaro ◽  
Javier Carrillo-Valle
Keyword(s):  
Power Generation ◽  
Power Plants ◽  
Electrostatic Precipitator ◽  
Combustion Process ◽  
Performance Expectations ◽  
Particulate Emission ◽  
Fabric Filter ◽  
Alternative Means ◽  
Emission Limits ◽  
Pulse Jet

The combustion process of power generation plants originates particulates. There are different technologies to collecting particulate such as electrostatic precipitators (ESPs) or fabric filters. Currently, these ESPs take 25 or 35 years in service and if the performance expectations of their Plants are positives, improving investments required which can adapt to the new particulate emission limits becoming more stringent. This paper analyzes an alternative means great savings in investment costs; Conversion of the existing ESP casing to a Pulse Jet fabric filter. This study also presents a real case, implementing this conversion with good results in unit of 660 MW power plants of Italy.

New learnings and strategies for meeting future recovery boiler particulate emission limits with existing electrostatic precipitators

TAPPI Journal ◽  
2021 ◽  
Vol 20 (6) ◽  
pp. 405-412
Author(s):  
IVAN SRETENOVIC
Keyword(s):  
Electrostatic Precipitator ◽  
Practical Experience ◽  
The United States ◽  
Operating Conditions ◽  
Particulate Emission ◽  
Process Simulations ◽  
Electrostatic Precipitators ◽  
Recovery Boiler ◽  
Emission Limits ◽  
Efficiency And Reliability

It is foreseeable that recovery boiler particulate emission limits in the United States and Canada will continue to get more stringent with time. Because of this, continued improvement of emission control equipment, as well as a better understanding of how operating parameters affect performance, are necessary. Although electrostatic precipitators (ESPs) are often viewed as a mature technology, many improvements in ESP technology continue to be developed. In recent years, academic efforts have improved the understanding of recovery boiler operating conditions on ESP performance. Additionally, advancements in materials, power supplies, and design continue to improve the efficiency and reliability of ESPs. This paper discusses how recovery boiler and electrostatic precipitator (ESP) operating factors affect ESP performance based on process simulations and practical experience, and how these learnings can be implemented to improve future operation of existing ESPs.

Pulse-Jet Baghouse Optimization in WTE: Meeting the Challenges of the Future

2005 ◽  
Author(s):  
Jeff Ladwig ◽  
Robin Linton
Keyword(s):  
Power Plants ◽  
Differential Pressure ◽  
Filter Element ◽  
Waste To Energy ◽  
Initial Capital ◽  
Capital Costs ◽  
Fabric Filter ◽  
The Future ◽  
On Line ◽  
Pulse Jet

Like many coal-fired power plants today, the waste-to-energy (WTE) industry is faced with a number of challenges including the need to maximize plant output, lower outlet emissions and increase plant efficiencies. Within WTE, there’s also been a move from reverse-air baghouses to pulse-jet collectors due to lower initial capital costs and the ability to operate pulse-jet collectors at higher air-to-cloth ratios (3–4:1), allowing for a smaller housing footprint. However, the majority of today’s pulse-jet collectors utilize an off-line cleaning mode where modules are taken out of service and pulsed to lower the differential pressure. There are inherent advantages in switching from an off-line cleaning mode to an on-line cleaning mode. This paper discusses the idea of using the fabric filter as a damper and stabilizing draft through the baghouse and boiler. It also outlines the use of pleated filter element (PFE) technology to address increased production concerns, and the need for lower outlet emissions.

scholarly journals Characteristics of Chlorine Releasing from Coal-Fired Power Plant

Atmosphere ◽  
2021 ◽  
Vol 12 (12) ◽  
pp. 1550
Author(s):  
Qianqian Sun ◽  
Tao Fang ◽  
Jun Chen ◽  
Chunnian Da
Keyword(s):  
Flue Gas ◽  
Pollution Control ◽  
Power Plants ◽  
Electrostatic Precipitator ◽  
Volatile Matter ◽  
Dust Collector ◽  
Fabric Filter ◽  
Chromatography Analysis ◽  
Theoretical Support ◽  
Highly Correlated

Chlorine (Cl) released from coal-fired power plants can be harmful to power equipment, the ecological environment and human health. Here, we investigated the Cl releasing characteristics from four coal-fired power plants (CFPPs) in China’s Anhui province based on an ion chromatography analysis of the combustion by-production samples collected from different locations of the power plants. The results showed that Cl content in coals was low (198–367 μg·g−1), which positively correlated with the contents of lead, mercury and total sulfur, but was weakly correlated with the moisture and ash yield in coal. The releasing rate of Cl during coal combustion was highly correlated with temperature and volatile matter, and most Cl is transferred into the flue gas. Dust collector and wet flue gas devices equipped in the CFPPs were robust for removing Cl in the particulate phase, and the fabric filter showed a higher removal efficiency than the electrostatic precipitator. This study can provide theoretical support for Cl pollution control in coal-fired power plants.

scholarly journals Co-Combustion Studies of Low-Rank Coal and Refuse-Derived Fuel: Performance and Reaction Kinetics

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3796
Author(s):  
Mudassar Azam ◽  
Asma Ashraf ◽  
Saman Setoodeh Setoodeh Jahromy ◽  
Sajjad Miran ◽  
Nadeem Raza ◽  
...  
Keyword(s):  
Activation Energy ◽  
Waste Management ◽  
Energy Demand ◽  
Power Plants ◽  
Combustion Process ◽  
Isoconversional Methods ◽  
Low Rank ◽  
Heating Rates ◽  
Average Activation Energy ◽  
Refuse Derived Fuel

In connection to present energy demand and waste management crisis in Pakistan, refuse-derived fuel (RDF) is gaining importance as a potential co-fuel for existing coal fired power plants. This research focuses on the co-combustion of low-quality local coal with RDF as a mean to reduce environmental issues in terms of waste management strategy. The combustion characteristics and kinetics of coal, RDF, and their blends were experimentally investigated in a micro-thermal gravimetric analyzer at four heating rates of 10, 20, 30, and 40 °C/min to ramp the temperature from 25 to 1000 °C. The mass percentages of RDF in the coal blends were 10%, 20%, 30%, and 40%, respectively. The results show that as the RDF in blends increases, the reactivity of the blends increases, resulting in lower ignition temperatures and a shift in peak and burnout temperatures to a lower temperature zone. This indicates that there was certain interaction during the combustion process of coal and RDF. The activation energies of the samples were calculated using kinetic analysis based on Kissinger–Akahira–Sunnose (KAS) and Flynn–Wall–Ozawa (FWO), isoconversional methods. Both of the methods have produced closer results with average activation energy between 95–121 kJ/mol. With a 30% refuse-derived fuel proportion, the average activation energy of blends hit a minimum value of 95 kJ/mol by KAS method and 103 kJ/mol by FWO method.

scholarly journals Predicting the Performance of Solar Power Generation Using Deep Learning Methods

2021 ◽  
Vol 11 (15) ◽  
pp. 6887
Author(s):  
Chung-Hong Lee ◽  
Hsin-Chang Yang ◽  
Guan-Bo Ye
Keyword(s):  
Power Generation ◽  
Solar Energy ◽  
Power Output ◽  
Power Plants ◽  
Solar Power ◽  
Photovoltaic Cell ◽  
Power Prediction ◽  
Seasonal Characteristics ◽  
Variable Nature ◽  
Solar Power Plants

In recent years, many countries have provided promotion policies related to renewable energy in order to take advantage of the environmental factors of sufficient sunlight. However, the application of solar energy in the power grid also has disadvantages. The most obvious is the variability of power output, which will put pressure on the system. As more grid reserves are needed to compensate for fluctuations in power output, the variable nature of solar power may hinder further deployment. Besides, one of the main issues surrounding solar energy is the variability and unpredictability of sunlight. If it is cloudy or covered by clouds during the day, the photovoltaic cell cannot produce satisfactory electricity. How to collect relevant factors (variables) and data to make predictions so that the solar system can increase the power generation of solar power plants is an important topic that every solar supplier is constantly thinking about. The view is taken, therefore, in this work, we utilized the historical monitoring data collected by the ground-connected solar power plants to predict the power generation, using daily characteristics (24 h) to replace the usual seasonal characteristics (365 days) as the experimental basis. Further, we implemented daily numerical prediction of the whole-point power generation. The preliminary experimental evaluations demonstrate that our developed method is sensible, allowing for exploring the performance of solar power prediction.

scholarly journals A Study on the Improvement of Efficiency by Detection Solar Module Faults in Deteriorated Photovoltaic Power Plants

2021 ◽  
Vol 11 (2) ◽  
pp. 727 ◽  
Author(s):  
Myeong-Hwan Hwang ◽  
Young-Gon Kim ◽  
Hae-Sol Lee ◽  
Young-Dae Kim ◽  
Hyun-Rok Cha
Keyword(s):  
Power Generation ◽  
Power Plants ◽  
Detection System ◽  
Failure Detection ◽  
Solar Module ◽  
Thermal Images ◽  
Power Stations ◽  
Photovoltaic Power ◽  
Manufacturing Technologies ◽  
Pv Power Generation

In recent years, photovoltaic (PV) power generation has attracted considerable attention as a new eco-friendly and renewable energy generation technology. With the recent development of semiconductor manufacturing technologies, PV power generation is gradually increasing. In this paper, we analyze the types of defects that form in PV power generation panels and propose a method for enhancing the productivity and efficiency of PV power stations by determining the defects of aging PV modules based on their temperature, power output, and panel images. The method proposed in the paper allows the replacement of individual panels that are experiencing a malfunction, thereby reducing the output loss of solar power generation plants. The aim is to develop a method that enables users to immediately check the type of failures among the six failure types that frequently occur in aging PV panels—namely, hotspot, panel breakage, connector breakage, busbar breakage, panel cell overheating, and diode failure—based on thermal images by using the failure detection system. By comparing the data acquired in the study with the thermal images of a PV power station, efficiency is increased by detecting solar module faults in deteriorated photovoltaic power plants.

Analysis of the Variable Cross-Section Duct and Straightening Device Geometry Effects on the Hydrogen Combustion Process

2021 ◽  
pp. 62-71
Author(s):  
O.V. Guskov ◽  
V.S. Zakharov ◽  
Minko
Keyword(s):  
Combustion Chamber ◽  
Cross Section ◽  
High Speed ◽  
Power Plants ◽  
Combustion Process ◽  
Variable Cross Section ◽  
Hydrogen Combustion ◽  
Variable Cross ◽  
Calculation Methods ◽  
Transition Channel

The development and research of high-speed aircrafts and their individual parts is an urgent scientific task. In the scientific literature there is information about the integral characteristics of aircrafts of this type, but there is no detailed consideration of such an important part as the transition channel between the air intake and the combustion chamber. The article considers several flow path configurations. The numerical simulation results of hydrogen combustion in the channels of variable cross section using a detailed kinetic mechanism are presented. Based on the analysis of the data obtained, the models of the transition channel and the combustion chamber showing the best characteristics were selected. The impulse and the fuel combustion efficiency are used as criteria for comparing the flow paths. The difference in the application of two calculation methods is described. The presented results and calculation methods can be used at the stage of computational research of the working processes in advanced power plants.

Low-Carbon Clean Technology for Waste Energy Recovery in Power Plants Based on Green Environmental Protection

2021 ◽  
Author(s):  
Yong Tian ◽  
Wen-Jing Liu ◽  
Qi-jie Jiang ◽  
Xin-Ying Xu
Keyword(s):  
Power Generation ◽  
Power Plants ◽  
Biomass Energy ◽  
Energy Utilization ◽  
Pollutant Emissions ◽  
Total Power ◽  
Economic Losses ◽  
Biomass Waste ◽  
Emission Analysis ◽  
Total Power Consumption

With the development of biomass power generation technology, biomass waste has a more excellent recycling value. The article establishes a biomass waste inventory model based on the material flow analysis method and predicts raw material waste’s energy utilization potential. The results show that the amount of biomass waste generated from 2016 to 2020 is on the rise. In 2020, biomass waste’s energy utilization can reach 107,802,300 tons, equivalent to 1,955.28PJ of energy. Through biomass energy analysis and emission analysis, the results show that the biomass waste can generate 182.02 billion kW⋅h in 2020, which can replace 35.9% of the region’s total power consumption, which is compared with the traditional power generation method under the same power generation capacity. Power generation can reduce SO2 emissions by 250,400 tons, NOx emissions by 399,300 tons, and PM10 emissions by 49,700 tons. Reduce direct economic losses by 712 million yuan. Therefore, Chinese promotion of the recycling of biomass waste and the acceleration of the biomass energy industry’s development is of great significance for reducing pollutant emissions and alleviating energy pressure.

Combustion process apportionment of carbonaceous particulate emission from a diesel fuel burner

2016 ◽  
Vol 100 ◽  
pp. 61-72 ◽  
Author(s):  
Laarnie Mueller ◽  
Juergen Schnelle-Kreis ◽  
Gert Jakobi ◽  
Juergen Orasche ◽  
Lianpeng Jing ◽  
...  
Keyword(s):  
Diesel Fuel ◽  
Combustion Process ◽  
Particulate Emission ◽  
Fuel Burner
Sign in / Sign up

Export Citation Format

Share Document