scholarly journals Perubahan kekuatan impak resin akrilik polimerisasi panas dalam perendaman larutan cuka apel

2010 ◽  
Vol 9 (1) ◽  
pp. 13
Author(s):  
Suguh Bhaktiar Pribadi ◽  
Moh. Yogiartono ◽  
Titien Hary Agustantina
Keyword(s):  
Impact Strength ◽  
Acrylic Resin ◽  
Control Groups ◽  
Resin Sample ◽  
Treatment Groups ◽  
The Impact

Acrylic resin being has been used in dentistry since 1946. Apple vinegar solutioncurrently popular as healthy supplement drink. It consists of tanin (fenol), acid, andother subtances. Fenol and acid are able to chemically damage to acrylic resin. Thepurpose of this study was to investigate the impact strength of heat cured acrylic resinafter immersed in apple vinegar solution. This experiment was carried out on the heatcured acrylic resin sample of size 65 x 10 x 2.5 mm. The immersion periods variedfrom 45 minutes, 11 days, and 17 days. There were 42 samples, divided into 21samples for three treatment groups and 21 samples for three control groups. Theresult showed that there were significant differences of acrylic resin strength afterimmersion in apple vinegar at 45 minutes and 17 days. The conclusion was the longerimmersion time of acrylic resin in apple vinegar would reduce the impact strength.

scholarly journals Effect of adding TiO2 nanoparticles on the SEM morphology and mechanical properties of conventional heat-cured acrylic resin

2019 ◽  
Vol 13 (3) ◽  
pp. 234-240
Author(s):  
Elnaz Moslehifard ◽  
Mahmood Robati Anaraki ◽  
Saeed Shirkavand
Keyword(s):  
Impact Strength ◽  
Tio2 Nanoparticles ◽  
Cross Sections ◽  
Average Particle Size ◽  
Acrylic Resin ◽  
Mechanical Tests ◽  
Average Particle ◽  
Sem Images ◽  
Tio2 Nps ◽  
The Impact

Background. The current study evaluated the compressive, flexural and impact strengths of heat-cured acrylic resins reinforced by TiO2 nanoparticles (NPs). Methods. TiO2 NPs were provided and characterized using scanning electron microscopy (SEM) to determine their morphology and crystalline structure. For three mechanical tests, 12 acrylic resin groups (n=9), totaling 108 specimens, were prepared using a special mold for each test, with TiO2 nanoparticle contents of 0, 0.5, 1 or 2 wt% in different groups. After curing, the compressive, flexural and impact strengths of the specimens were examined according to ISO 1567. Results. In the SEM and XRD study of TiO2 NPs, anatase was identified as the major crystalline phase followed by rutile (average particle size: 20.4 nm). SEM images showed that the nanocomposite with 1 wt% NPs had a more homogenized blend. 1 wt% TiO2 nanocomposite exhibited a higher, but non-significant, impact strength compared to the controls. ANOVA showed significant differences in the impact and flexural strengths between nanocomposites with various contents of TiO2 NPs. Conclusion. The nanocomposite with 1 wt% TiO2 NPs exhibited fewer micro-pores and micro-cracks in the SEM cross-sections. A non-significant increase was also observed in the impact strength with TiO2 NPs at 1 wt%. Further increase in TiO2 NPs decreased both the impact and flexural strengths. The compressive strength of the heat-cured acrylic resin was not affected by the incorporation of NPs.

The Effect of Chitosan Addition in Acrylic Resin Matrix towards the Residual Monomers and Impact Strength

2021 ◽  
pp. 2280-2285
Author(s):  
Titik Ismiyati ◽  
Ananto Ali Alhasyimi
Keyword(s):  
Acrylic Acid ◽  
Impact Strength ◽  
Charpy Impact ◽  
Acrylic Resin ◽  
Test Sample ◽  
Acid Group ◽  
Resin Matrix ◽  
Residual Monomer ◽  
Group 2 ◽  
The Impact

Background: A residual monomer might have impact on the quality of acrylic resin since its caused allergic reactions and inflammation. Chitosan is a biocompatible material and potential to reduce residual monomers and ameliorate the impact strength of acrylic resin Objective of the study: To examine the effect of an acrylic resin matrix mixed with chitosan together with 1% and 2% acrylic acid as denture base and orthodontic material on residual monomers and impact strength. Methodology: There were 30 samples for the test analysis. The impact strength test sample formed with a plate size of 55 × 10 × 10mm, whereas the residual monomer test sample was prepared into powder. The test samples were divided into 3 groups, of 10 samples. Group 1 acrylic resin only, group 2 acrylic resin matrix mixed with chitosan and 1% acrylic acid, group 3 is the same as group 2 but with a concentration of 2% acrylic acid. Gas chromatography was used for measuring the residual monomers. The impact strength was tested by the Charpy impact. The data was evaluated using the ANOVA and correlation test. Results: There were significant differences (p < 0.05) in acrylic resin without addition with the matrix of acrylic resin with chitosan and acrylic acid 1% and 2% to the number of monomers and impact strength. Conclusion: The mixture of acrylic resin with chitosan and acrylic acid 1% and 2% can reduce the amount of residual monomer and increase the impact strength.

scholarly journals ADDITION OF RICE HUSK NANOCELLULOSE TO THE IMPACT STRENGTH OF RESIN BASE HEAT CURED

2021 ◽  
Vol 4 (3) ◽  
pp. 119
Author(s):  
Muhammad Aditya Ramadhan Hasran ◽  
Dian Noviyanti Agus Imam ◽  
Bambang Sunendar
Keyword(s):  
Impact Strength ◽  
Mechanical Strength ◽  
Rice Husk ◽  
Acrylic Resin ◽  
Control Group ◽  
P Value ◽  
Test Results ◽  
Nano Cellulose ◽  
Reinforcing Material ◽  
The Impact

Background: One of the materials for denture bases is heat-cured acrylic resin (PMMA). This material still lacks impact strength as a mechanical strength property. The addition of reinforcing material is known to increase the mechanical strength of PMMA. One of the reinforcing materials added to PMMA is nano cellulose from rice husks, one of the wastes from agricultural products. Purpose: This study aims to determine rice husk nano cellulose's addition to the PMMA denture base's impact strength. Method:  The research sample consisted of six groups, each group consisting of 8 samples selected by simple random. The PI, P2, P3, P4, P5, and K groups were PMMA with 1%, 2%, 3%, 4%, 5% nano cellulose, and without nano cellulose. Result: Mean impact strength test results were 41.50 x 10-3 ± 3.891 J / mm2 for P1, 44.13 x 10-3 ± 3,980 J / mm2 for P2, 45.63 x 10-3 ± 4,438 J / mm2 for P3, 46.87 x 10-3 ± 4,824 J / mm2 for P4, 49.12 x 10-3 ± 4.016 J / mm2 for P5 and 36.25 x 10-3 ± 1.982 J / mm2 for K. One way Anova test results with p-value of 0.000 indicates differences in the six groups (p<0.05). Conclusion: This study concludes that the impact strength value of PMMA with the addition of rice husk nano cellulose has increased compared to the control group without the addition of rice husk nano cellulose.

The Difference of Impact Strength in Acrylic Resin Self-Cured with the Addition of Zirconium Dioxide (ZrO2) Nanoparticles

DENTA ◽  
2018 ◽  
Vol 12 (1) ◽  
pp. 51
Author(s):  
Widaningsih Widaningsih ◽  
Annete Juwita ◽  
Puguh Bayu Prabowo
Keyword(s):  
Impact Strength ◽  
Zirconium Dioxide ◽  
Acrylic Resin ◽  
Zro2 Nanoparticles ◽  
Control Group ◽  
Control Group Design ◽  
Post Test ◽  
The Difference ◽  
The One ◽  
The Impact

<p><strong><em>Background:</em></strong><em> Self-cured acrylic resin is a material used for repairing broken and fractured dentures. Zirconium dioxide (ZrO2) is a reinforcing material that is being developed as an additive to the acrylic resin. <strong>Objective:</strong> to determine the effect of zirconium dioxide (ZrO<sub>2</sub>) addition on self-cured acrylic resin on impact strength. <strong>Material and Methods:</strong> This study was a true experimental laboratory study with the design of a post-test only control group design, using 24 pieces of self-cured acrylic resin measuring 65 x 10 x 2.5 mm divided into 4 groups with and without zirconium addition dioxide (ZrO<sub>2</sub>) nanoparticles. Zirconium dioxide (ZrO<sub>2</sub>) nanoparticles were silanized first by mixing the silane coupling agent. Furthermore, the impact strength was tested on the plate. The data obtained were analyzed using the One Way ANOVA test. <strong>Results:</strong> there were significant differences in the impact strength between the groups with a significance value of 0,000 (p &lt;0.05). <strong>Conclusion:</strong> there was a difference in the increase of impact strength in acrylic resin self-cured with the addition of ZrO<sub>2</sub> nanoparticles concentrations of 3%, 5%, and 7%.</em></p><p><em><br /></em></p><p><strong><em>Key words:</em></strong><em> Self cured acrylic resin, zirconium dioxide, impact strength</em><em></em></p><p><strong><em> </em></strong></p><strong><em>Correspondence </em></strong><em>: Widaningsih, Department of Prosthodonti, Faculty of Dentistry, Hang Tuah University, Arif Rahman Hakim 150, Sukolilo, Surabaya, Phone 0818312757, Email: </em><a href="mailto:[email protected]"><em>[email protected]</em></a>

Utilization of tyre rubber hybrid with ceramic and wood for impact energy absorption application

2021 ◽  
pp. 096739112110080
Author(s):  
M Sermaraj ◽  
K Ramanathan ◽  
A Athijayamani
Keyword(s):  
Composite Materials ◽  
Impact Strength ◽  
Impact Energy ◽  
Rubber Particle ◽  
Resin Matrix ◽  
Wood Dust ◽  
Neat Resin ◽  
Resin Sample ◽  
Morphological Studies ◽  
The Impact

The used tyre rubber, scrap ceramic tiles and wood dust are largely dumped into landfills, which create environmental pollution to the surrounding. The recycling of tyre rubber is very limited, but it has good property to absorb the impact energy. Hence, these materials are used to prepare the composite in the present work. Composite materials were prepared by the resin transfer moulding method with different weight percentage of particles. The tensile, flexural and impact strength of composite specimens were compared with other combination of composites and also with the neat resin sample specimen. The tensile and flexural strength of composites were decreased with the addition of the rubber. But, the rubber particle with the ceramic in the resin matrix increases the impact strength of composite by 45.91% when compared with the neat resin sample. The addition of rubber enhances the impact strength of composite materials with all the combination of particles. The better distribution and good interfacial adhesion of particles with a resin matrix along the fractured surface were observed by the scanning electron microscope. And also, the nature of failure was identified by morphological studies.

scholarly journals The Effect Of Heating Acrylic Resin Of Various Types With Different Temperatures On Impact Strength

2021 ◽  
Vol 12 (2) ◽  
pp. 141-148
Author(s):  
Didik Marsigid
Keyword(s):  
Impact Strength ◽  
Base Material ◽  
Acrylic Resin ◽  
Type A ◽  
Transverse Resistance ◽  
Different Temperatures ◽  
Experimental Laboratory ◽  
The Impact ◽  
Unstable Temperature

Resin polymerization which is affected by unstable temperature causes the resin to break easily. The strength of the base material is affected by the forces acting in the mouth, such as transverse forces, other resistance or fatigue, and flexibility. Fracture of denture caused by masticatory loads and is affected by forces acting in the mouth, including transverse, resistance or fatigue, and flexural forces. Experimental Laboratory total of 72 samples consisting of 18 samples of  type A, B and C cured at normal temperature, 100oC, 200oC, and 300oC. Types A, B and C have the effect of heating with the addition of temperature on the impact strength of acrylic resin, because the value of sig = 0.001 < 0.05, so H0 is rejected. An effect with the addition of temperature on the impact strength of the resin types A, B and C, because sig = 0.001 < 0.05, so H0 is rejected, which means that the average results are significantly different due to differences in temperature.

scholarly journals Impact of Buprenorphine on Learning and Memory Ability Related to the Acetylcholinesterase Change in the Hippocampus of Rats

2021 ◽  
Vol 11 (5) ◽  
pp. 13111-13114
Keyword(s):  
Memory Impairment ◽  
Ache Activity ◽  
Memory Function ◽  
Male Rats ◽  
Control Groups ◽  
Treatment Groups ◽  
Activity Inhibition ◽  
Significant Difference ◽  
Male Wistar Rats ◽  
The Impact

Buprenorphine (BUP), a “synthetic opioid”, may cause memory impairment. This investigation aimed to study the impact of BUP on memory function related to acetylcholinesterase (AChE) activity inhibition in male rats. 24 male Wistar rats were randomly divided into three groups; control (C) and two treatment groups BUP (0.3 and 1) (n=8, for each group). BUP (0.3 and 1 mg/kg) was administrated subcutaneously once a day for 30 days. Normal saline 0.9% was injected in to control groups. In the end, animals were anesthetized and decapitated, and their hippocampus was dissected to assess AChE activity. There were no significant differences between the activities of AChE in the hippocampus in BUP-treated animals compared with controls. Besides, the activities of AChE in the BUP 0.3 group and BUP 1 group did not indicate a significant difference. These findings did not confirm the effect of BUP at doses of 0.3 and 1 mg/kg on memory function associated with the AChE activity inhibition.

scholarly journals Enhancing the impact strength of acrylic resin base plate by adding non-dental E-glass fiber

2021 ◽  
Vol 6 (2) ◽  
pp. 106
Author(s):  
Mara Gustina ◽  
Widjijono Widjijono ◽  
Endang Wahyuningtyas
Keyword(s):  
Impact Strength ◽  
Glass Fiber ◽  
Fiber Orientation ◽  
Base Plate ◽  
Acrylic Resin ◽  
Impact Testing ◽  
Control Group ◽  
Anova Test ◽  
The Impact ◽  
One Way Anova

Non-dental glass fiber is one of the materials that can be used to increase the impact strength of a acrylic resin base plate, containing a similar composition to that of dental e-glass fiber. Orientation and positions of fiber affect the reinforcement effectiveness. This research aimed to examine the effect of the orientation of non-dental glass fiber in the compression position on the impact strength of an acrylic resin base plate. The research was conducted on 16 acrylic resin plates with fiber (65 mm x 10 mm x 2.5 mm) addition. The samples were divided into 4 groups (combination of different woven orientation unidirectional, bidirectional woven in the compression position, and control). The material used in this study was heat-cured acrylic resin QC-20 brand, non-dental glass fiber (without any brand). Impact strength was tested using an impact testing machine. The data obtained were analyzed using one-way ANOVA test and LSD (p<0.05). In this research the impact strength of the base plate with the addition of fiber increased 8.54 ± 2.21; 13.21 ± 2.34; 16.81 ± 2.80 kJ/m2 compared to that of the control group, i.e. 4.98 ± 1.05 kJ/m2. One-way ANOVA test showed a significant effect (p<0.05) of the fiber orientation variations on the compression position. This research concluded that the addition of nondental e-glass fiber (composed of SiO252.56-56.88%), diameter 17.12–20.03 µm) in the compression zone increases theimpact strength of acrylic resin base plate. Fibers with unidirectional orientationprovides the highest increase in the impact strength of acrylic resin base plate.

Sign in / Sign up

Export Citation Format

Share Document