Enhanced Biocompatibility of GPC by Ion Implantation and Deposition

2005 ◽  
Vol 908 ◽  
Author(s):  
Robert Lee Zimmerman ◽  
Ismet Gürhan ◽  
Claudiu I. Muntele ◽  
Daryush Ila ◽  
Feyzan Özdal-Kurt ◽  
...  
Keyword(s):  
Ion Implantation ◽  
Biomedical Applications ◽  
Heart Valves ◽  
Cell Attachment ◽  
Blood Stream ◽  
Silver Deposition ◽  
In Vitro Biocompatibility ◽  
Artificial Heart Valves ◽  
Model Cell

AbstractBiocompatible Glassy Polymeric Carbon (GPC) is used for artificial heart valves and in other biomedical applications. Although it is ideally suited for implants in the blood stream, tissue that normally forms around the moving parts of a GPC heart valve sometimes loses adhesion and creates embolisms downstream. Here we compare silver ion implantation and silver deposition, each of which strongly inhibits cell attachment on GPC. Inhibition of cell adhesion is a desirable improvement to current GPC cardiac implants. In vitro biocompatibility tests have been carried out with model cell lines to demonstrate that traces of silver can favorably influence the surface of GPC for biomedical applications.

Enhanced Biocompatibility of GPC by MeV Ion Bombardment

2005 ◽  
Vol 873 ◽  
Author(s):  
R. Zimmerman ◽  
I. Gurhan ◽  
S. Sarkisov ◽  
C. Muntele ◽  
D. Ila ◽  
...  
Keyword(s):  
Biomedical Applications ◽  
Heart Valves ◽  
Surface Hardness ◽  
Ion Bombardment ◽  
Blood Stream ◽  
Hard Material ◽  
Collagenous Tissue ◽  
Artificial Heart Valves ◽  
Model Cell

AbstractGlassy Polymeric Carbon (GPC) is completely biocompatible and is widely used as a material for artificial heart valves and in other biomedical applications. Although it is ideally suited for fluid flow in the blood stream, collagenous tissue that normally forms around the moving parts of a GPC heart valve sometimes loses adhesion and creates embolisms downstream. We have shown that moderate fluence of MeV ions, especially oxygen ions, increases the surface roughness of GPC on a scale appropriate for enhancing tissue adhesion. Silver ion implantation is shown to inhibit cell growth on GPC. Ion bombardment also increases the surface hardness of GPC, already an extremely hard material. In vitro biocompatibility tests have been carried out with model cell lines to demonstrate that MeV ion bombardment can favorably influence the surface of GPC for biomedical applications.

Patterning of Cell Attachment to Biocompatible Glassy Polymeric Carbon by Silver Ion Implantation

2006 ◽  
Vol 942 ◽  
Author(s):  
Robert Lee Zimmerman ◽  
Ismet Gurhan ◽  
Daryush Ila ◽  
F. Ozdal-Kurt ◽  
B. H. Sen ◽  
...  
Keyword(s):  
Ion Implantation ◽  
Cell Attachment ◽  
Blood Stream ◽  
Tissue Growth ◽  
Silver Ion ◽  
Near Surface ◽  
Precise Control ◽  
In Vitro Biocompatibility ◽  
Polymeric Carbon

ABSTRACTAlthough Glassy Polymeric Carbon (GPC) is ideally suited for implants in the blood stream, tissue that normally forms around the moving parts of a GPC heart valve. There is concern that the tissue lose adhesion and create the condition for embolisms downstream. We have shown that silver ion implantation or argon ion assisted surface deposition of silver inhibits cell growth on GPC, a desirable improvement of current cardiac implants. In vitro biocompatibility tests have been carried out with model cell lines to demonstrate that near surface implantation of silver in GPC can completely inhibit cell attachment on implanted areas while leaving adjacent areas unaffected. Patterned ion implantation permits precise control of tissue growth on medical applications of GPC.

Persistent Inhibition of Cell Growth on Silver Implanted Glassy Polymeric Carbon

2006 ◽  
Vol 950 ◽  
Author(s):  
Robert L. Zimmerman ◽  
Ismet Gürhan ◽  
F. Ozdal-Kurt ◽  
B. H. Sen ◽  
Marcello Rodrigues ◽  
...  
Keyword(s):  
Cell Growth ◽  
Cell Attachment ◽  
Surface Deposition ◽  
Near Surface ◽  
In Vitro Biocompatibility ◽  
Model Cell ◽  
One Year ◽  
Polymeric Carbon ◽  
Argon Ion

ABSTRACTWe have shown that silver ion implantation or argon ion assisted surface deposition of silver inhibits cell growth on Glassy Polymeric Carbon (GPC), a desirable improvement of current cardiac implants. In vitro biocompatibility tests have been carried out with model cell lines to demonstrate that near surface implantation of silver in GPC can completely inhibit cell attachment on implanted areas while leaving adjacent areas vulnerable to strong cell adhesion. After cleaning and sterilization and more than one year in physiologic solution, the silver implanted GPC persists in inhibiting cell attachment.

scholarly journals Surface Properties and Biocompatibility of Anodized Titanium with a Potential Pretreatment for Biomedical Applications

Metals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1090
Author(s):  
Bai-Hung Huang ◽  
Yi-Jung Lu ◽  
Wen-Chien Lan ◽  
Muhammad Ruslin ◽  
Hung-Yang Lin ◽  
...  
Keyword(s):  
Porous Structure ◽  
Biomedical Applications ◽  
Grazing Incidence ◽  
Acid Pretreatment ◽  
Osteoblast Cells ◽  
In Vitro Biocompatibility ◽  
Porous Ti ◽  
Diphenyltetrazolium Bromide ◽  
Anodized Titanium

The effects of anodized titanium (Ti) with a potential hydrogen fluoride (HF) acid pretreatment through cathodization on the formation of nano-porous Ti dioxide (TiO2) layer were characterized using field-emission scanning electron microscopy, grazing incidence X-ray diffractometer, and contact angle goniometer. The biocompatibility was determined by 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide (MTT) test. Analytical results found that a well-aligned nano-porous structure was formed on the anodized Ti surface with HF pretreatment concentration above 0.5%. Microstructure of the nano-porous Ti dioxide surface generated by anodization with HF pretreatment was composed of anatase and rutile phases, while the anodized Ti sample with HF pretreatment concentration of 0.5% presented excellent hydrophilicity surface. An in-vitro biocompatibility also indicated that osteoblast cells grown on the surface of the anodized Ti sample with HF pretreatment increased with the increase of culture time. The filopodia of osteoblast cells not only adhered flat, but also tightly grabbed the nano-porous structure for promoting cell adhesion and proliferation. Therefore, the anodized Ti with HF pretreatment can form a functionalized surface with great biocompatibility for biomedical applications, particularly for dental implants.

scholarly journals Development of 3D Bioactive Nanocomposite Scaffolds Made from Gelatin and Nano Bioactive Glass for Biomedical Applications

2010 ◽  
Vol 19 (2) ◽  
pp. 096369351001900 ◽  
Author(s):  
M. Mozafari ◽  
F. Moztarzadeh ◽  
M. Rabiee ◽  
M. Azami ◽  
N. Nezafati ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bioactive Glass ◽  
Biomedical Applications ◽  
Cell Attachment ◽  
Tissue Engineering Scaffolds ◽  
Study Results ◽  
Nanocomposite Scaffold ◽  
Nanocomposite Scaffolds ◽  
First Time

In this research, macroporous, mechanically competent and bioactive nanocomposite scaffolds have been fabricated from cross-linked gelatine (Gel) and nano bioactive glass (nBG) through layer solvent casting combined with freeze-drying and lamination techniques. This study has developed a new composition to produce a new bioactive nanocomposite which is porous with interconnected microstructure, pore sizes are 200-500 μm, porosity are 72%-86%. Also, we have reported formation of chemical bonds between nBG and Gel for the first time. Finally, the in vitro cytocompatability of the scaffolds was assessed using MTT assay and cell attachment study. Results indicated no sign of toxicity and cells found to be attached to the pore walls offered by the scaffolds. These results suggested that the developed nanocomposite scaffold possess the prerequisites for bone tissue engineering scaffolds and it can be used for tissue engineering applications.

Calcification Modelling in Artificial Heart Valves

1992 ◽  
Vol 15 (5) ◽  
pp. 284-288 ◽  
Author(s):  
A.C. Fisher ◽  
G.M. Bernacca ◽  
T.G. Mackay ◽  
W.R. Dimitri ◽  
R. Wilkinson ◽  
...  
Keyword(s):  
Artificial Heart ◽  
Heart Valves ◽  
Test Protocol ◽  
Tissue Sections ◽  
Artificial Heart Valves ◽  
In Vivo Tests ◽  
Tissue Contents ◽  
Histological Staining

This study has examined a range of methods of studying the calcification process in bovine pericardial and polyurethane biomaterials. The calcification methods include static and dynamic, in vitro and in vivo tests. The analytical methods include measurement of depletion rates of calcium and phosphate from in vitro calcifying solutions, analysis of tissue contents of calcium, histological staining of tissue sections for calcium, X-ray elemental analysis, by scanning electron microscopy, of calcium and phosphorus distributions over valve leaflets calcified in vitro under dynamic conditions. Bovine pericardium, in all test settings, calcified to a much greater degree than polyurethane biomaterials. Polyurethane extracts calcified to a greater degree than bulk polyurethanes. The test protocol used allows progress through increasily demanding calcification tests, with the possibility of eliminating unsuitable materials with tests of limited complexity and expense.

Parameters and Methods for Testing Artificial Heart Valves

1989 ◽  
Vol 12 (4) ◽  
pp. 252-260 ◽  
Author(s):  
J.C. Köhler ◽  
J.G. Tech
Keyword(s):  
Heart Valves ◽  
Close Correlation ◽  
Test Methods ◽  
In Vitro Tests ◽  
Geometrical Parameters ◽  
Test Standards ◽  
Artificial Heart Valves ◽  
Minimum Requirements ◽  
Definition Of

The report describes the development of heart valve test standards. The aim is comprehensive quality assurance by in vitro tests. The project includes three test fields: general basis, development and definition of test methods and test devices and comparative in vitro assessment of valves for the definition of minimum requirements. A preliminary list of test parameters and test steps has been defined: geometrical, flow, deformation, force, and conditioning parameters. A system of geometrical parameters has been developed for standardized aortic models. Geometrical parameters of 31 valves of six types and different sizes underline a close correlation between geometrical and hemodynamic parameters. The relative ostium cross-section Ae/AT increases with valve size and lies between 0.3 and 0.5. Two new measurement devices with quasi-steady flow are proposed as quick testers for leakage flow and pressure loss.

3D Printed PLA/PCL/TiO2 Composite for Bone Replacement and Grafting

MRS Advances ◽  
2018 ◽  
Vol 3 (40) ◽  
pp. 2373-2378 ◽  
Author(s):  
Sandra E. Nájera ◽  
Monica Michel ◽  
Nam-Soo Kim
Keyword(s):  
Biomedical Applications ◽  
Fused Deposition Modeling ◽  
Fracture Strain ◽  
Fused Deposition ◽  
In Vitro Biocompatibility ◽  
Bone Replacement ◽  
Deposition Modeling ◽  
3D Printed ◽  
The Stability

ABSTRACTPolymer composites of Polylactic acid (PLA) and poly-ε-caprolactone (PCL), containing small amounts of titanium oxide (TiO2) were developed for biomedical applications. These composite materials were prepared, and then printed using Fused Deposition Modeling (FDM). 3D printed structures were characterized to determine their mechanical properties and biocompatibility. DSC analysis yielded useful information regarding the immiscibility of the different polymers, and it was observed that the particles of TiO2 improved the stability of the polymers. The ultimate tensile strength and the fracture strain increased by adding TiO2 as a filler, resulting in values of approximately 45 MPa and 5.5 % elongation. The printed composites show excellent in vitro biocompatibility including cell proliferation and adhesion, and are therefore promising candidates to be used in the biomedical field for bone replacement procedures, due to their properties similar to those of cancellous bone.

scholarly journals Enhanced in vitro biocompatibility and osteogenesis of titanium substrates immobilized with dopamine-assisted superparamagnetic Fe 3 O 4 nanoparticles for hBMSCs

2018 ◽  
Vol 5 (8) ◽  
pp. 172033 ◽  
Author(s):  
Zhenfei Huang ◽  
Zhihong Wu ◽  
Bupeng Ma ◽  
Lingjia Yu ◽  
Yu He ◽  
...  
Keyword(s):  
Cell Attachment ◽  
Clinical Applications ◽  
Bone Mesenchymal Stem Cells ◽  
Water Contact ◽  
Alizarin Red ◽  
In Vitro Biocompatibility ◽  
Related Transcription Factor ◽  
Nanoparticle Coatings ◽  
Bio Compatibility

Titanium (Ti) is an ideal bone substitute due to its superior bio-compatibility and remarkable corrosion resistance. However, in order to improve the osteoconduction and osteoinduction capacities in clinical applications, different kinds of surface modifications are typically applied to Ti alloys. In this study, we fabricated a tightly attached polydopamine-assisted Fe 3 O 4 nanoparticle coating on Ti with magnetic properties, aiming to improve the osteogenesis of the Ti substrates. The PDA-assisted Fe 3 O 4 nanoparticle coatings were characterized by scanning electron microscopy, energy dispersive spectroscopy, atomic force microscopy and water contact angle measurements. The cell attachment and proliferation rate of the human bone mesenchymal stem cells (hBMSCs) on the Ti surface significantly improved with the Fe 3 O 4 /PDA coating when compared with the pure Ti without a coating. Furthermore, the results of in vitro alkaline phosphatase (ALP) activity at 7 and 14 days and alizarin red S staining at 14 days showed that the Fe 3 O 4 /PDA coating on Ti promoted the osteogenic differentiation of hBMSCs. Moreover, hBMSCs co-cultured with the Fe 3 O 4 /PDA-coated Ti for approximately 14 days also exhibited a significantly higher mRNA expression level of ALP, osteocalcin and runt-related transcription factor-2 (RUNX2). Our in vitro results revealed that the present PDA-assisted Fe 3 O 4 nanoparticle surface coating is an innovative method for Ti surface modification and shows great potential for clinical applications.

Sign in / Sign up

Export Citation Format

Share Document