Epitaxial growth and interface roughness of PdMn/Fe bilayer structures grown by ion-beam sputtering

2001 ◽  
Vol 672 ◽  
Author(s):  
Ning Cheng ◽  
J.P. Ahn ◽  
Werner Grogger ◽  
Kannan Krishnan
Keyword(s):  
Ion Beam ◽  
Interface Roughness ◽  
Ion Beam Sputtering ◽  
X Ray Diffraction ◽  
Orientation Relationships ◽  
Magnetic Exchange ◽  
Transmission Electron ◽  
Magnetic Exchange Coupling ◽  
Wide Range ◽  
Beam Sputtering

ABSTRACTDifferent orientations of PdMn films and different stacking orders of PdMn and Fe on MgO(001) were studied. At low temperatures (T< 280°C) dominated by the kinetics of growth, a-axis orientated [PdMn(100)/Fe(001)/MgO(001)] was stabilized whilst c-axis [PdMn(001)/Fe(001)/MgO(001)] were obtained at higher temperatures (T> 300°C). The inverted structures, Fe(001)/PdMn(001)/MgO(001) and Fe(001)/PdMn(100)/MgO(001), were obtained epitaxially for the first time. The magnetic exchange coupling (He) of these PdMn/Fe bilayers show a wide range in values: ∼ 10 Oe for annealed a-axis samples, ∼ 33 Oe for c-axis normal samples and ∼ 68 Oe for c-axis inverted samples. The interface roughness of these samples was characterized by energy-filtered transmission electron microscopy (EFTEM). The orientation relationships were confirmed by x-ray diffraction and TEM. The possible origins for the He difference in a-axis and c-axis growth samples and the normal and inverted samples are discussed.

Relationship Between Microstructure and Hardness of ZrN/TiN Multi-Layers with Various Bilayer Thicknesses

2010 ◽  
Vol 63 ◽  
pp. 392-395
Author(s):  
Yoshifumi Aoi ◽  
Satoru Furuhata ◽  
Hiromi Nakano
Keyword(s):  
Mechanical Property ◽  
Electron Microscope ◽  
Transmission Electron Microscope ◽  
Ion Beam ◽  
Ion Beam Sputtering ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Beam Sputtering ◽  
Microstructure And Mechanical Property

ZrN/TiN multi-layers were synthesized by ion beam sputtering technique. Microstructure and mechanical property of the ZrN/TiN multi-layers were characterized and the relationships between microstructure and hardness of the ZrN/TiN multi-layers with various bilayer thicknesses and thickness ratios were investigated. The microstructure of multi-layers have been investigated using transmission electron microscope (TEM) and X-ray diffraction (XRD).

Investigation of YSZ Thin Films on Silicon Wafer and NiO/YSZ Deposited by Ion Beam Sputtering Deposition (IBSD)

2007 ◽  
Vol 336-338 ◽  
pp. 1788-1790
Author(s):  
Yu Ju Chen ◽  
Wen Cheng J. Wei
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Ion Beam ◽  
Ion Beam Sputtering ◽  
X Ray Diffraction ◽  
Sputtering Deposition ◽  
X Ray ◽  
Crystal Growth Process ◽  
Transmission Electron ◽  
Beam Sputtering

Ion-beam sputtering deposition is a physical deposited method which uses accelerated ionbeam to sputter oxide or metal targets, and deposits atoms on substrate. Thin films of yttrium-stabilized zirconia (YSZ) were deposited on Si (100) wafer and NiO/YSZ plate. Scanning electron microscopy and transmission electron microscopy with EDS were employed to study the microstructural and chemically stoichiometric results of the films and the crystal growth process by various heat treatments. X-ray diffraction was also used to analysis crystalline phase of the YSZ films. The influence of different targets, substrates deposited efficiency and the properties of the film will be presented and discussed.

Microstructure and Mechanical Properties of Nanolayered TiN/Cu Thin Films

2003 ◽  
Vol 778 ◽  
Author(s):  
Y.Y. Tse ◽  
G. Abadias ◽  
A. Michel ◽  
C. Tromas ◽  
M. Jaouen
Keyword(s):  
Mechanical Properties ◽  
Ion Beam ◽  
Ion Beam Sputtering ◽  
X Ray Diffraction ◽  
Depth Sensing ◽  
Transmission Electron ◽  
Beam Sputtering ◽  
Hardness Increase ◽  
Dual Ion Beam Sputtering ◽  
The Relationship

AbstractStructural and mechanical properties of nanoscale TiN/Cu multilayers grown by dual ion beam sputtering with bilayer periods (A) ranging from 2.5 to 50 nm were studied. Both low-angle and high-angle X-ray diffraction (XRD) experiments have been employed to globally characterize the multilayers structure. The microstructure of the multilayers has been scrutinized by high resolution transmission electron microscopy (HRTEM). The effects of interface and bilayer thickness on hardness were investigated by depth-sensing nanoindentation technique. A small hardness increase with decreasing periodicity of the multilayers has been observed. The relationship between the hc/T ratio (hc is the contact depth and T is the total film thickness) and the hardness is established. The correlation between the microstructure and hardness is discussed.

scholarly journals Structural Transition in Cu/Fe Multilayered Thin Films

1996 ◽  
Vol 441 ◽  
Author(s):  
Tai D. Nguyen ◽  
Alison Chaiken ◽  
Troy W. Barbee
Keyword(s):  
Layer Thickness ◽  
Ion Beam ◽  
Microstructural Development ◽  
Ion Beam Sputtering ◽  
X Ray Diffraction ◽  
Cross Sectional ◽  
X Ray ◽  
Transmission Electron ◽  
Beam Sputtering ◽  
Bcc Structure

AbstractMicrostructural development of Fe and Cu in Cu/Fe multilayers of layer thickness 1.5–10 nm prepared on Si, Ge, and MgO substrates by ion beam sputtering has been studied using x-ray diffraction and cross-sectional transmission electron microscopy (TEM). High-angle x-ray results show an fcc Cu structure and a distorted bcc structure in the Fe layers at 5 nm-layer-thickness and smaller, and bcc Fe (110) and fcc Cu (111) peaks in the 10 nm-layer-thickness samples. Lowangle x-ray diffraction indicates that the layers in the samples grown on MgO substrates have a more uniform and smooth layered structure than the multilayers grown on Si and Ge substrates, which results from larger grains in the MgO substrate samples for the same layer thickness. Relationships among growth, microstructure, and interfaces with layer thickness are discussed.

TEM Study of Co/Pd and Co/Au Multilayers

1993 ◽  
Vol 51 ◽  
pp. 1036-1037
Author(s):  
A.E.M. De Veirman ◽  
F.J.G. Hakkens ◽  
W.M.J. Coene ◽  
F.J.A. den Broeder
Keyword(s):  
Magnetic Anisotropy ◽  
Ion Beam ◽  
Perpendicular Magnetic Anisotropy ◽  
Optical Recording ◽  
Magnetic Multilayer ◽  
Ion Beam Sputtering ◽  
Cross Sectional ◽  
Transmission Electron ◽  
Beam Sputtering ◽  
Substrate Temperatures

There is currently great interest in magnetic multilayer (ML) thin films (see e.g.), because they display some interesting magnetic properties. Co/Pd and Co/Au ML systems exhibit perpendicular magnetic anisotropy below certain Co layer thicknesses, which makes them candidates for applications in the field of magneto-optical recording. It has been found that the magnetic anisotropy of a particular system strongly depends on the preparation method (vapour deposition, sputtering, ion beam sputtering) as well as on the substrate, underlayer and deposition temperature. In order to get a better understanding of the correlation between microstructure and properties a thorough cross-sectional transmission electron microscopy (XTEM) study of vapour deposited Co/Pd and Co/Au (111) MLs was undertaken (for more detailed results see ref.).The Co/Pd films (with fixed Pd thickness of 2.2 nm) were deposited on mica substrates at substrate temperatures Ts of 20°C and 200°C, after prior deposition of a 100 nm Pd underlayer at 450°C.

Formation of Luminescent Si Nanocrystals by High-Temperature Annealing of Ion-Beam-Sputtered Si/SiO2 Multilayers

2003 ◽  
Vol 775 ◽  
Author(s):  
Suk-Ho Choi ◽  
Jun Sung Bae ◽  
Kyung Jung Kim ◽  
Dae Won Moon
Keyword(s):  
Quantum Confinement ◽  
Radiative Recombination ◽  
Ion Beam ◽  
Quantum Confinement Effect ◽  
Visible Range ◽  
Ion Beam Sputtering ◽  
Transmission Electron ◽  
Si Nanocrystals ◽  
Beam Sputtering ◽  
Microscopy Images

AbstractSi/SiO2 multilayers (MLs) have been prepared under different deposition temperatures (TS) by ion beam sputtering. The annealing at 1200°C leads to the formation of Si nanocrystals in the Si layer of MLs. The high resolution transmission electron microscopy images clearly demonstrate the existence of Si nanocrystals, which exhibit photoluminescence (PL) in the visible range when TS is ≥ 300°C. This is attributed to well-separation of nanocrystals in the higher-TS samples, which is thought to be a major cause for reducing non-radiative recombination in the interface between Si nanocrystal and surface oxide. The visible PL spectra are enhanced in its intensity and are shifted to higher energy by increasing TS. These PL behaviours are consistent with the quantum confinement effect of Si nanocrystals.

Aluminum nitride films synthesized by dual ion beam sputtering

2004 ◽  
Vol 19 (12) ◽  
pp. 3521-3525 ◽  
Author(s):  
Sheng Han ◽  
Hong-Ying Chen ◽  
Chih-Hsuan Cheng ◽  
Jian-Hong Lin ◽  
Han C. Shih
Keyword(s):  
Crystal Structure ◽  
Aluminum Nitride ◽  
Ion Beam ◽  
Diffraction Field ◽  
Ion Beam Sputtering ◽  
X Ray Diffraction ◽  
Axis Orientation ◽  
Beam Voltage ◽  
Beam Sputtering ◽  
Dual Ion Beam Sputtering

Aluminum nitride films were deposited by varying the voltages of argon ion beams from 400 to 1200 V in dual ion beam sputtering. The crystal structure, microstructure, and elemental distributions of the aluminum nitride films were analyzed by x-ray diffraction, field emission scanning electron microscopy, and secondary ion mass spectroscopy, respectively. The aluminum nitride films exhibited the 〈002〉 preferred orientation at an optimal ion beam voltage of 800 V. The orientation changed to a mixture of {100} and {002} planes above 800 V, accounting for radiation damage. The thickness of the film increases with increasing ion beam voltage, reaching a steady state value of 210 nm at an ion beam voltage of 1200 V. Under optimal condition (800 V), the c-axis orientation of the aluminum nitride 〈002〉 film was obtained with a dense and high-quality crystal structure.

Structural, Optical and Electrical Characteristics of Silicon Carbon Nitride

1999 ◽  
Vol 592 ◽  
Author(s):  
L. C. Chen ◽  
C. T. Wu ◽  
C.-Y Wen ◽  
J.-J. Wu ◽  
W. T. Liu ◽  
...  
Keyword(s):  
Carbon Nitride ◽  
Ion Beam ◽  
Interface Roughness ◽  
Electrical Characteristics ◽  
Ion Beam Sputtering ◽  
Electrical Measurements ◽  
Sputtering Deposition ◽  
Silicon Carbon ◽  
Beam Sputtering ◽  
Silicon Carbon Nitride

ABSTRACTDielectric layers of thin silicon carbon nitride (SiCxNy) films have been prepared by ion beam sputtering deposition (IBD). For submicron metal-insulator-Si (MIS) based device applications, a dielectric of low interface roughness, increased capacitance/area with lower leakage on decreasing scale is highly desirable. We address these aspects for the IBD SiCxNy films on p-type Si and present their structural, optical and electrical characteristics as a function of the deposition conditions. Ultraviolet-visible transmittance and spectroscopic ellipsometry were employed to study the optical properties of the SiCxNy films. For electrical measurements, Al gate electrodes were fabricated on SiCxNy films to form metal-nitride-silicon (MNS) diodes. Characteristic I-V and photoconductivity measurements of the MNS are presented.

The Structure of Si and Ge Deposited by Ion Beam Sputtering

1985 ◽  
Vol 47 ◽  
Author(s):  
H. Windischmann ◽  
J. M. Cavese ◽  
R. W. Collins ◽  
R. D. Harris ◽  
J. Gonzalez-Hernandez
Keyword(s):  
Crystallization Temperature ◽  
Film Growth ◽  
Ion Beam ◽  
Operating Pressure ◽  
Ion Beam Sputtering ◽  
X Ray Diffraction ◽  
Oxygen Contamination ◽  
Beam Sputtering ◽  
Silicon And Germanium ◽  
Substrate Temperatures

ABSTRACTThe crystallinity for silicon and germanium films deposited by ion beam sputtering (IBS) as a function of substrate temperatures was determined using Raman spectroscopy, spectroscopic ellipsometry, electrical conductivity and x-ray diffraction measurements. The results show that IBS silicon crystallizes between 300–350°C while germanium crystallizes between 20–200°C. Reasonably good agreement is obtained among the four distinctively different characterization techniques in identifying the onset of crystallinity. A direct relationship is observed between the substrate temperature required for crystallization and the log of the operating pressure for various deposition techniques. Energetic particle stimulation during film growth appears to reduce the crystallization temperature at a given operating pressure. Raman data show that the crystallization temperature depends on the deposition rate. A graded structure is observed in films deposited above 300°C, probably due to oxygen contamination.

Ion Beam Sputter Deposition of Refractory Metal Oxides

1994 ◽  
Vol 354 ◽  
Author(s):  
B.E. Kempf ◽  
H.W. Dinges ◽  
A. PÖcker
Keyword(s):  
Near Infrared ◽  
Filter Design ◽  
Ion Beam ◽  
Optical Filter ◽  
Pure Metal ◽  
Ion Beam Sputtering ◽  
Infrared Wavelength ◽  
Wide Range ◽  
Beam Sputtering ◽  
Ion Beam Sputter Deposition

AbstractOxides of hafnium, niobium, tantalum, and zirconium are deposited by ion beam sputtering of the pure metal targets using CO2 as working gas. The resulting thin films are amorphous, featureless smooth and of excellent adherence to semiconductor substrates. Despite a certain content of carbon they are highly transparent in the visible and near infrared wavelength range as determined by spectroscopic ellipsometry. Their wide range of refractive indices makes them suitable for multilayer optical filter design.

Sign in / Sign up

Export Citation Format

Share Document