scholarly journals RESEARCH OF THE INFLUENCE OF THE DISPERSION OF THE ACTUAL LINK SIZES ON THE TRANSMISSION FUNCTION OF THE MECHANISM OF ROD SEMI-AUTOMATICS

2021 ◽  
pp. 67-73
Author(s):  
Mikhail Bazuev ◽  
◽  
Vitaly Koksharov ◽  
Alexey Naichuk ◽  
◽  
...  
Keyword(s):  
Transfer Function ◽  
Transmission Function ◽  
Cumulative Effect ◽  
Output Link ◽  
Kinematic Chains ◽  
Real Size ◽  
Tool Building ◽  
The Cost ◽  
The Given ◽  
Selection Of

In this work, the analysis of real deviations from the nominal dimensions links, and their cumulative effect on the final movement of the chain linkage element rolling semiautomatic mechanism. The considered mechanism was converted to an equivalent one, consisting of lower translational and rotational kinematic pairs. In the course of the structural analysis, the mechanism was divided into Assur groups in order to simplify further kinematic calculations. The calculation was carried out sequentially for each of the structural groups separately. Based on this, a mathematical model of the kinematics of a rolling semiautomatic mechanism was developed, taking into account the real size of the links, that is, possible deviations of the links size from the nominal values for any combination of them. Using a specific example with the given installation dimensions of the mechanism, the transfer function of the output link (wedge) is built, and the range of its possible change is determined according to the specified dimensional tolerances. Combinations of link sizes for the boundaries of the range of change of the transfer function have been determined It is shown that with the tolerances indicated in accordance with the Unified system of tolerances and fits, the deviation of the position of the output link at the extreme position of the input link (pusher) can reach ±10 of that calculated by the nominal dimensions. This model can be used to solve the problems of optimal selection of tolerances and reduce the cost of manufacturing a product, based on the kinematic restrictions imposed on the functionality of the mechanism. The proposed approach to the construction and analysis of analytical mathematical models can be relevant for a wide variety of industries: machine tool building, engine building, weapons industry and aircraft building, especially where mechanisms are used that form long kinematic chains.

DESIGN OF CROSS-COUPLED RESONATOR FILTERS WITH PARALLEL RESONANCE CIRCUITS

2007 ◽  
Vol 16 (04) ◽  
pp. 589-602
Author(s):  
BAISHAN ZHAO ◽  
WAI-KAI CHEN
Keyword(s):  
Transfer Function ◽  
Design Procedure ◽  
Circuit Model ◽  
Scaling Factor ◽  
Coupling Matrix ◽  
Simulation Results ◽  
Parallel Resonance ◽  
The Given ◽  
Selection Of ◽  
Coupled Resonator

A method to design a cross-coupled resonator filter with parallel resonance circuits is presented, which includes the selection of a circuit model, introduces a scaling factor and a bandwidth condition, and calculates the values of the coupling and resonance admittances of the circuit model by a coupling matrix derived from the given transfer function. Finally, an example is given to illustrate the design procedure. The simulation results validate the proposed design procedure.

scholarly journals MODEL OPTIMISASI UNTUK MASALAH MINIMISASI BIAYA PERJALANAN WISATA TUR-TUNGGAL DI ZONA KEPULAUAN

2021 ◽  
Vol 4 ◽  
pp. 68-75
Author(s):  
M Thezar Afifudin ◽  
Dian P. Sahar
Keyword(s):  
Cost Minimization ◽  
Programming Approach ◽  
Transportation Mode ◽  
Travel Costs ◽  
Non Linear Programming ◽  
Time Minimization ◽  
The Cost ◽  
The Given ◽  
Cost Components ◽  
Selection Of

This study aims to develop an optimization model for solving the insular cost minimization single-tour travel problems. The model was developed using an integer non-linear programming approach by considering the selection of departure and arrival points of an island, selecting accommodation points, selecting transportation mode departure schedules, and selecting travel routes both within islands and between islands. The cost components considered include inter-island travel costs, land travel costs, costs at selective points, and costs waiting for departure. A numerical experiment was conducted on the case of planning a tourist route in Maluku, Indonesia. The departure day scenario is built to find out the exact route and schedule on each day of departure with a minimum total cost. In addition, comparisons were also made to the results obtained in the time minimization model that was introduced earlier. The results showed that the model can adapt through variations of solutions to changes in the given parameters and objectives.

Determination of the minimum number of technological bases of a part

2020 ◽  
pp. 73-75
Author(s):  
B.M. Bazrov ◽  
T.M. Gaynutdinov
Keyword(s):  
Cost Price ◽  
Labor Input ◽  
Part Surface ◽  
Technological Base ◽  
Size Accuracy ◽  
Minimum Number ◽  
The Cost ◽  
Input Cost ◽  
Selection Of

The selection of technological bases is considered before the choice of the type of billet and the development of the route of the technological process. A technique is proposed for selecting the minimum number of sets of technological bases according to the criterion of equality in the cost price of manufacturing the part according to the principle of unity and combination of bases at this stage. Keywords: part, surface, coordinating size, accuracy, design and technological base, labor input, cost price. [email protected]

Application of the turbidity ratio method in the spherical particle size determination in the range m ∈ and α ∈

1979 ◽  
Vol 44 (7) ◽  
pp. 2064-2078 ◽  
Author(s):  
Blahoslav Sedláček ◽  
Břetislav Verner ◽  
Miroslav Bárta ◽  
Karel Zimmermann
Keyword(s):  
Refractive Index ◽  
Spherical Particle ◽  
Ratio Method ◽  
Refractive Indices ◽  
Relative Refractive Index ◽  
Particle Size Determination ◽  
The Individual ◽  
The Given ◽  
Turbidity Ratio ◽  
Selection Of

Basic scattering functions were used in a novel calculation of the turbidity ratios for particles having the relative refractive index m = 1.001, 1.005 (0.005) 1.315 and the size α = 0.05 (0.05) 6.00 (0.10) 15.00 (0.50) 70.00 (1.00) 100, where α = πL/λ, L is the diameter of the spherical particle, λ = Λ/μ1 is the wavelength of light in a medium with the refractive index μ1 and Λ is the wavelength of light in vacuo. The data are tabulated for the wavelength λ = 546.1/μw = 409.357 nm, where μw is the refractive index of water. A procedure has been suggested how to extend the applicability of Tables to various refractive indices of the medium and to various turbidity ratios τa/τb obtained with the individual pairs of wavelengths λa and λb. The selection of these pairs is bound to the sequence condition λa = λ0χa and λb = λ0χb, in which b-a = δ = 1, 2, 3; a = -2, -1, 0, 1, 2, ..., b = a + δ = -1, 0, 1, 2, ...; λ0 = λa=0 = 326.675 nm; χ = 546.1 : 435.8 = 1.2531 is the quotient of the given sequence.

scholarly journals The Recent Progress of Natural Sources and Manufacturing Process of Biodiesel: A Review

2021 ◽  
Vol 13 (10) ◽  
pp. 5599
Author(s):  
Eko Supriyanto ◽  
Jayan Sentanuhady ◽  
Ariyana Dwiputra ◽  
Ari Permana ◽  
Muhammad Akhsin Muflikhun
Keyword(s):  
Recent Progress ◽  
Review Paper ◽  
Ghg Emissions ◽  
Production Method ◽  
Biodiesel Production ◽  
Natural Sources ◽  
Harmful Emissions ◽  
Daily Energy ◽  
The Cost ◽  
Selection Of

Biodiesel has caught the attention of many researchers because it has great potential to be a sustainable fossil fuel substitute. Biodiesel has a non-toxic and renewable nature and has been proven to emit less environmentally harmful emissions such as hydrocarbons (HC), and carbon monoxide (CO) as smoke particles during combustion. Problems related to global warming caused by greenhouse gas (GHG) emissions could also be solved by utilizing biodiesel as a daily energy source. However, the expensive cost of biodiesel production, mainly because of the cost of natural feedstock, hinders the potential of biodiesel commercialization. The selection of natural sources of biodiesel should be made with observations from economic, agricultural, and technical perspectives to obtain one feasible biodiesel with superior characteristics. This review paper presents a detailed overview of various natural sources, their physicochemical properties, the performance, emission, and combustion characteristics of biodiesel when used in a diesel engine. The recent progress in studies about natural feedstocks and manufacturing methods used in biodiesel production were evaluated in detail. Finally, the findings of the present work reveal that transesterification is currently the most superior and commonly used biodiesel production method compared to other methods available.

ON THE HYBRID-DRIVEN LINKAGE MECHANISM WITH ONE INPUT CYCLE CORRESPONDING TO TWO OUTPUT CYCLES

2015 ◽  
Vol 39 (3) ◽  
pp. 637-646
Author(s):  
Ren-Chung Soong
Keyword(s):  
Kinematic Analysis ◽  
Angular Speed ◽  
Motion Trajectory ◽  
Dimensional Synthesis ◽  
Reciprocating Motion ◽  
Linkage Mechanism ◽  
Output Link ◽  
Input And Output ◽  
Single Input ◽  
Selection Of

A hybrid-driven five-bar linkage mechanism with one input cycle corresponding to two output cycles is presented. The proposed linkage mechanism is driven by a constant-speed motor and a linear motor, respectively. The output link can generate two same required output cycles during a single input cycle, while the rotational input link rotates with a constant angular speed, and the linear input link follows a reciprocating motion along a specified linear guide fixed on the rotational input link. The configuration, displacement relationship between the input and output links, and conditions of mobility of this proposed mechanism were studied, and a kinematic analysis was performed. The selection of the instantaneous motion trajectory of the linear input link and an optimal dimensional synthesis are also described. An example is provided to verify the feasibility and effectiveness of this methodology.

Recruitment and selection of couples for intervention research: Achieving developmental homogeneity at the cost of demographic diversity.

2006 ◽  
Vol 74 (4) ◽  
pp. 777-784 ◽  
Author(s):  
Ronald D. Rogge ◽  
Rebecca J. Cobb ◽  
Lisa B. Story ◽  
Matthew D. Johnson ◽  
Erika E. Lawrence ◽  
...  
Keyword(s):  
Intervention Research ◽  
Demographic Diversity ◽  
Recruitment And Selection ◽  
The Cost ◽  
Selection Of

Construction of Temporary Accommodation Camp and Selection of Optimal Type of Building

2015 ◽  
Vol 725-726 ◽  
pp. 105-110
Author(s):  
Aleksandr Birjukov ◽  
Sergey Bolotin
Keyword(s):  
Type Systems ◽  
Structural Systems ◽  
Basic Criterion ◽  
Economic Indexes ◽  
The Cost ◽  
Container Type ◽  
Selection Of ◽  
Optimal Type ◽  
Temporary Accommodation

Surveys performed nationwide show that mobile temporary accommodation camps are being manufactured by more than 200 specialized enterprises (without considering the minor manufacturers) acting under different ministries and agencies. According to the analysis performed, today 26 basic mobile structural systems consisting of 18 conveyor-type and 8 demountable-type systems are being used on a national basis. Today national manufacturers are producing more than 250 types of container-type buildings and facilities which differ in functionality, capacity, climatic category, price and other technical-and-economic indexes. Use of mobile accommodation complexes is characterized by certain advantages. Basic criterion for mobile accommodation camp construction consists in its timely commissioning. Basic predicted indexes affecting the cost of temporary accommodation camp could serve as an endorsement of the forwarded standpoint.

The Use of SGLT2i and GLP-1 RA in Patients with Type 2 Diabetes in Thailand: Evidence Review and Recommendations

2021 ◽  
Vol 104 (11) ◽  
pp. 1850-1865
Keyword(s):  
Type 2 Diabetes ◽  
Glucose Lowering ◽  
Sodium Glucose Cotransporter ◽  
Evidence Review ◽  
Glucagon Like Peptide ◽  
Glucagon Like Peptide 1 ◽  
Glucose Lowering Therapy ◽  
The Cost ◽  
Selection Of

Background: Cardiovascular (CV) and renal comorbidities are common among type 2 diabetes (T2D) patients, and significantly increase the cost and burden of care. Both sodium-glucose cotransporter-2 inhibitors (SGLT2i) and glucagon-like peptide-1 receptor agonists (GLP-1 RA) improve key outcomes including major CV events, hospitalization for heart failure, and renal outcomes, albeit to varying degrees in different T2D populations. Materials and Methods: The authors reviewed evidence from GLP-1 RA and SGLT2i CV outcomes trials and real-world studies in Thailand and elsewhere. Results: The authors formulated recommendations to guide selection of anti-diabetes medication based on patients’ clinical characteristics and CV or renal risk profile. Conclusion: These recommendations could help guide management of CV/renal comorbidities and risk alongside glucose-lowering therapy for individual patients. Keywords: Type 2 diabetes mellitus; Cardiovascular diseases; Chronic kidney disease; Clinical outcomes; SGLT2i; GLP-1 RA

Influence of the cost of technological equipment of body production on indicators of efficiency of working processes

2021 ◽  
pp. 28-32
Author(s):  
Keyword(s):  
Quality Index ◽  
Production Efficiency ◽  
Statistical Data ◽  
The Body ◽  
Technological Equipment ◽  
Production Body ◽  
Body Production ◽  
The Cost ◽  
Efficiency Indicators ◽  
Selection Of

The possibilities for the development of bodywork in the context of the growing level of competition are analyzed in the article. The technological processes of bodywork are considered and the problem of choosing technological equipment is indicated. The statistical data about the efficiency indicators of company body divisions, operating in the body repair market in Krasnoyarsk, are presented. A composite quality index for the equipment of the bodywork department (using the example of body stocks) is proposed and calculated, and on its basis, some recommendations are given for companies which plan to enter the market of body repair services. Keywords: body production, body repair, body equipment, body production efficiency, selection of technological equipment

Sign in / Sign up

Export Citation Format

Share Document