scholarly journals Driving forces and inhibitors of secondary stock extraction

2017 ◽  
Author(s):  
Anders Kihl ◽  
Graham Aid
Keyword(s):  
Driving Forces ◽  
Raw Materials ◽  
Raw Material ◽  
Common Resources ◽  
The Core ◽  
Sustainable Future ◽  
Core Issue

Even though it’s well known to mankind that our common resources are limited and that recycling is a key for a sustainable future; in reality we see few examples of true recycling where virgin raw material is substituted by waste. There are endless number of examples where waste is utilized to some extent without solving the core issue: reducing the need of extracting virgin raw materials. This article analyses some of the driving forces and inhibitors that explains why it’s so difficult establish secondary stock extraction although technology is available. The authors discuss and suggest possible ways for reducing the some of the main barriers.

scholarly journals Driving Forces and Inhibitors of Secondary Stock Extraction

2016 ◽  
Vol 9 (1) ◽  
pp. 11-18 ◽  
Author(s):  
Anders Kihl ◽  
Graham Aid
Keyword(s):  
Large Scale ◽  
Driving Forces ◽  
Raw Materials ◽  
Raw Material ◽  
Common Resources ◽  
The Core ◽  
Sustainable Future ◽  
Core Issue

Even though it’s well known that our common resources are limited and that recycling is key for a sustainable future; in reality we see few examples of true recycling where virgin raw material is substituted by waste. There are endless numbers of examples where waste is utilized to some extent without solving the core issue: reducing the need of extracting virgin raw materials. This article analyses some of the driving forces and inhibitors of secondary stock extraction to explore why it’s so difficult establish large scale secondary stock extraction although suitable technologies are available. The authors discuss and suggest possible ways for reducing some of the main barriers presented.

scholarly journals Development of Advanced High Strength Automotive Steels

2021 ◽  
Vol 4 (1) ◽  
pp. 9-17
Author(s):  
Miklós Tisza
Keyword(s):  
Automotive Industry ◽  
First Generation ◽  
Driving Forces ◽  
Raw Materials ◽  
High Strength Steels ◽  
High Strength ◽  
Point Of View ◽  
Raw Material ◽  
Advanced High Strength Steels ◽  
Harmful Emissions

Abstract In recent decades, the automotive industry has faced ever-increasing demands. Increasing requirements can be observed in terms of both consumer expectations and legal requirements. On the consumer side, there is a demand for cars that are as economical as possible with lower fuel consumption, but providing also greater comfort and safety. These requirements are accompanied, from a legal point of view by more rigorous environmental regulations and requirements concerning the reduction of harmful emissions. Meeting these often-contradictory requirements is a growing challenge for car manufacturers and raw material suppliers, as well. Meeting the requirements in the most versatile way has resulted in tremendous progress over the last 40–50 years, both in the automotive industry and in the production and development of raw materials. The first part of this series of papers summarizes the main requirements in the automotive industry, as the main driving forces for material developments. Furthermore, the main types and properties of traditional high-strength steels, as well as the so-called first-generation Advanced High-Strength Steels will be introduced. In the second part, the main types and manufacturing processes of second generation advanced high-strength steels will be analyzed and some of the current steel developments will be presented through the results of the three generations of Advanced High-Strength Steels.

scholarly journals Features of realization of process of peeling of a nut shell between a plate and a spherical insert

2019 ◽  
pp. 93-99
Author(s):  
Polievoda Yurii
Keyword(s):  
Shell Thickness ◽  
Driving Forces ◽  
Raw Material ◽  
Walnut Shell ◽  
Agricultural Enterprises ◽  
The Core ◽  
Crushing Force ◽  
The Coefficient Of Friction ◽  
Mechanical Cleavage

The profitability of walnut cultivation and processing was investigated in the paper, both on small farms and large agricultural enterprises. The demand for walnuts in Ukraine and abroad was investigated. Theoretical studies of the dynamics of nut crop growth in the territory of our country were conducted. The tendency to increase domestic production of walnuts in the future is established. Among the most important areas of the organization of the process of purification of this raw material is noted the process of chopping (crushing) of its shell. Applying a constructive implementation of a vibrating machine «GMK-350» for the process of mechanical cleavage of the shell of a walnut were carried out studies of the influence of the working body (plate and spherical insert) on the technological and energy parameters of the process taking into account the quality of the processed product (the integrity of the core). The article analyzes the process of shelling of walnuts between the plate and the spherical insert. Graphical correlations between the size of the shell deformation and the dynamics of change of the driving force of change at different nut humidity and shell thickness are analyzed. The scheme of driving forces in the area of contact between the nut and the ring is drawn up and analyzed. The graphical dependences of the maximum crushing force on the bevel of the rings according to different shell thickness are presented; variations of the maximum crushing force depending on the humidity of the nuts for different thicknesses of the nut shell. It is established that, theoretically, the coefficient of friction increases as the angle of inclination of the ring increases. It is established that the crushing force of a walnut shell depends less on the friction coefficient and more on the contact surface.

Brook Ziporyn’s (Chinese) Buddhist Reading of Chinese Philosophy

2018 ◽  
Vol 34 (2) ◽  
pp. 259-267
Author(s):  
Paul J. D'Ambrosio
Keyword(s):  
Chinese Philosophy ◽  
Review Article ◽  
Chinese Buddhism ◽  
Classroom Discussions ◽  
The Core ◽  
Chinese Thought ◽  
Core Issue ◽  
Tiantai Buddhism ◽  
Early Chinese Philosophy

This review article defends Brook Ziporyn against the charge, quite common in graduate classroom discussions, if not in print, that his readings of early Chinese philosophy are ‘overly Buddhist’. These readings are found in his three most recent books: Ironies of Oneness and Difference: Coherence in Early Chinese Thought, Beyond Oneness and Difference: Li and Coherence in Chinese Buddhist Thought and Its Antecedents, and Emptiness and Omnipresence: An Essential Introduction to Tiantai Buddhism. His readings are clearly Buddhist-influenced, but this is not in and of itself problematic. The core issue is rather to what degree these ‘Buddhist elements’ are actually already existent in, and have subsequently been carried over from, early Chinese thought in the development of Chinese Buddhism. Indeed, some scholars of Chinese Buddhism have pointed out that much of the vocabulary, concepts, and logic used in schools such as Tiantai may owe more to Daoist influences than to Buddhist ones. Accordingly, Ziporyn’s ‘overly Buddhist’ approach might simply be an avenue of interpretation that is actually quite in line with the thinking in the early texts themselves, albeit one that is less familiar (i.e. an early Chinese Buddhist or Ziporyn’s approach). The article also aims to show how Ziporyn’s theory concerning the importance of ‘coherence’ in early and later Chinese philosophy is also quite important in his above work on Tiantai Buddhism, Emptiness and Omnipresence. While in this work Ziporyn almost entirely abstains from using the language of coherence, much of it actually rests on a strong coherence-based foundation, thereby demonstrating not Ziporyn’s own prejudice, but rather the thoroughgoing importance and versatility of his arguments on coherence. Indeed, understanding the importance of coherence in his readings of Tiantai Buddhism (despite the fact that he does not explicitly use coherence-related vocabulary) only bolsters the defense against the claims that he makes ‘overly Buddhist’ readings of early Chinese philosophy.

RHEOLOGICAL PROPERTIES OF CERAMIC MASSES: IMPROVEMENT BY COMPLEX MATERIAL ACTIVATION

2019 ◽  
Vol 16 (3) ◽  
pp. 334-351
Author(s):  
A. S. Mavlyanov ◽  
E. K. Sardarbekova
Keyword(s):  
Rheological Properties ◽  
Raw Materials ◽  
Sensitivity Coefficient ◽  
Raw Material ◽  
Clay Material ◽  
Fibrous Materials ◽  
Chemical Production ◽  
Production Wastes ◽  
Pass Through ◽  
The Masses

Introduction. The objective of the research is to study the effect of the complex activation of the alumina raw material on the rheological properties of the ceramic mass. In addition, the authors investigate solutions for the application of optimal coagulation structures based on loams and ash together with plastic certificates.Materials and methods. The authors used the local forest like reserves of clay loams at the BashKarasu, ash fields of the Bishkek Central Heating Centre (BTEC) and plasticizer (sodium naphthenate obtained from alkaline chemical production wastes) as fibrous materials. Moreover, the authors defined technological properties of raw materials within standard laboratory methodology in accordance with current GOSTs.Results. The researchers tested plastic durability on variously prepared masses for the choice of optimal structures. The paper demonstrated the plastic durability of complexly activated compounds comparing with non-activated and mechanically activated compounds. The sensitivity coefficient increased the amount of clay loams by mechanically and complexly activated, which predetermined the possibility of intensifying the process of drying samples based on complexly activated masses.Discussion and conclusions. However, mechanical activation of clay material reduces the period of relaxation and increases the elasticity coefficient of ceramic masses by 1.8–3.4 times, meanwhile decreases elasticity, viscosity and the conventional power during molding, which generally worsens the molding properties of the masses. Сomplex activation of ash-clay material decreases the period of relaxation and provides an increase in elasticity, plasticity of ceramic masses by 46–47%, reduction in viscosity by 1.5–2 times, conventional power on molding by 37–122% in comparison with MA clay loams. Ceramic masses based on spacecraft alumina raw materials belong to the SMT with improved rheological properties; products based on them pass through the mouthpiece for 5–7 seconds.

ANALYSIS FOR POTENCY AND PRODUCTION OF GRANULE ORGANIC FERTILIZER BASED ON MANURE

2018 ◽  
Vol 7 (2) ◽  
Author(s):  
Firman L. Sahwan
Keyword(s):  
Organic Material ◽  
Organic Materials ◽  
Raw Materials ◽  
Organic Fertilizer ◽  
Raw Material ◽  
Cow Manure ◽  
Production Potential ◽  
Natural Organic Material ◽  
Very High

Organic materials that are generally used as raw material for organic fertilizer granules (POG) is a natural organic material that has been degrade, smooth and dry. One of the main raw materials are always used with a very high percentage of usage, is manure. Manure potential in Indonesia is very high, amounting to 113.6 million tons per year, or 64.7 million tons per year to the island of Java. From this amount, it will be generated numbers POG production potential of 17.5 million tons per year (total Indonesia) or 9.9 million tons per year for the island of Java. While the realistic POG production predictions figures made from raw manure is 2.5 million tons annually, a figure that has been unable to meet the number requirement of POG greater than 4 million tons per year. Therefore, in producing POG, it should be to maximize the using of the potential of other organic materials so that the use of manure can be saved. With the use of a small amount of manure (maximum 30% for cow manure), it would be useful also to avoid the production of POG with high Fe content.keywods: organic material, manure, granule organic fertilizer

Nutritional Value Research of Spelt Pasta with Vegetable Additives

Food Industry ◽  
2020 ◽  
Vol 5 (2) ◽  
pp. 61-70
Author(s):  
Oliya Fazullina ◽  
Stanislav Smirnov
Keyword(s):  
Dietary Fiber ◽  
Nutritional Value ◽  
Raw Materials ◽  
Health Indicators ◽  
Dietary Treatment ◽  
Raw Material ◽  
Whole Wheat ◽  
Healthy Nutrition ◽  
Physiologically Active Substances ◽  
Simple Carbohydrates

Health indicators of the population depend significantly on the food quality and nutritional value. Simple carbohydrates excess of and lack of protein, dietary fiber, vitamins, minerals, antioxidants and other physiologically active substances increase the risk of socially significant disease progress. The development and production of mass-consumed products with high nutritional and biological value, including affordable non-traditional raw materials use, are promising areas of the food industry development aimed at improving the nutritional status of the population. The article presents the research results on the developed Noodle products recipes from non-traditional raw materials that meet modern healthy nutrition requirements, intended for dietary treatment and dietary prevention of people with overweight / obesity. The research aimed at expanding the range of macaroni products with these characteristics. As the main raw material, a man selected whole-wheat flour – new spelt flour, and as additional raw materials – buckwheat flour, broccoli and celery powders. The researchers found that the introduction of macaroni products from buckwheat spelt, broccoli and celery powders into the recipe had a multidirectional effect, reducing or increasing various indicators of its nutritional value. The changes range did not affect the overall characteristics. The satisfaction degree of the average daily need for food substances and energy when consuming a portion of 100 g for each sample of developed Noodle products allows them to be classified as functional products that are protein and dietary fiber sources, according to the requirements of the TR CU 022/2011.

UNIDO, Industrial Processing of Natural Resources. New York: United Nations. 1981. viii + 78pp.US $ 5.00. [United Nations Publication Sales No. E. 81. 11 . B.1]

1982 ◽  
Vol 21 (4) ◽  
pp. 329-333
Author(s):  
Rashid Aziz
Keyword(s):  
New York ◽  
United Nations ◽  
Industrial Development ◽  
Raw Materials ◽  
Developed Countries ◽  
Raw Material ◽  
Industrial Processing ◽  
Depth Study ◽  
Manufactured Exports ◽  
Year 2000

The book under review is a concise but fairly in-depth study of the prospects for export diversification from the Less Developed Countries (henceforth labeled as LDCs) particularly to Developed Countries (henceforth labeled as OCs). Given the multiple problems faced by the LOCs in exporting to the OCs - protectionist policies with regards to manufactured exports, volatility of prices obtained for raw material exports, etc. - the study analyses the potential for following an intermediate route. The important issues in the export of semi -processed and wholly processed raw materials are discussed. 111ese issues range from the problems and potentials for the location of processing facilities in the LOCs to the formulation of appropriate policies to encourage an export of processed goods rather than raw materials. Such policies will be useful both in solving the balance of-payments problems of the LDCs and in attaining the goal of the Lima Declaration and Plan of Action on Industrial Development and Co-operation, that called for 2S percent of world industrial production to be located in the LOCs by the year 2000.

PENGARUH HARGA DAN PEMAKAIAN PERSEDIAAN BAHAN BAKU TERHADAP VOLUME PRODUKSI PADA PT. KELOLA MINA LAUT DI GRESIK

MANAJERIAL ◽  
2018 ◽  
Vol 1 (1) ◽  
pp. 66
Author(s):  
BAYU YRI WIDHARTO
Keyword(s):  
Linear Regression ◽  
Hypothesis Testing ◽  
Multiple Linear Regression ◽  
Raw Materials ◽  
T Test ◽  
Raw Material ◽  
Analysis Tool ◽  
Production Volume ◽  
F Test ◽  
Material Price

The purpose of the research was to know the affect of many factors which affected to the production volume in PT. Kelola Mina Laut Gresik. What the price of raw materials was and the used of raw materials partially and simultan eously affected on the production volume. The analysis tool which used was a model of multiple linear regression. Hypothesis testing used t test and F test, both at the significant level 5%. Based of the analysis of research on PT Kelola Mina Laut Gresik. Partially, inventory raw material price had not significant effect on the production volume, consumption of raw material inventory affected significantly of the production volume. Inventory of raw material price and the use of raw material simultan eously affect significantly to the production volume.

TECHNOLOGICAL ASPECTS OF HIGH QUALITY RAW MATERIAL OBTAINING FOR PECTIN PRODUCTION

1970 ◽  
pp. 47-50
Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun
Keyword(s):  
Raw Materials ◽  
Thermal Characteristics ◽  
Environmental Safety ◽  
Raw Material ◽  
High Quality ◽  
Temperature Conductivity ◽  
Drying Temperature ◽  
Plant Raw Materials ◽  
Gel Forming Ability

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.

Sign in / Sign up

Export Citation Format

Share Document