scholarly journals DETERMINATION OF RATIONAL PARAMETERS OF SUPPORTING STRUCTURES MADE OF SOIL-CEMENT PILES ON LANDSLIDE-PRONE SLOPES

2021 ◽  
pp. 97-105
Author(s):  
О. L. Tiutkin ◽  
D. Y. Ihnatenko
Keyword(s):  
Similarity Criteria ◽  
Sliding Surface ◽  
Movement Vector ◽  
Supporting Structure ◽  
Soil Cement ◽  
Layered Slope ◽  
The Stability ◽  
First Time ◽  
Supporting Structures ◽  
Surface Curve

Purpose. The article proposes a method for determining the rational parameters of supporting structures made of soil-cement piles on landslide-prone slopes. Methodology. To achieve this purpose, the authors performed comparative calculations of finite-element models of landslide-prone layered slope with the arrangement of supporting structures of soil-cement piles: vertical, located at an angle to the vertical axis, combined with a concrete grillage, without grillage, with different diameters, with different distances between piles, but of the same length, which is justified by the location determined by preliminary calculations of the sliding surface. Findings. According to the results of calculating the contact problem of the interaction of the soil mass and the supporting structure, the regularities of formation of strength and stability of the reinforced landslide-prone slope were obtained, which makes it possible to predict its geomechanical stability depending on the possible location of the sliding surface curve. The method of increasing the stability coefficient of the soil slope depending on the variation of the parameters of the soil-cement supporting pile structure is substantiated. Numerical calculations substantiate the parameters of soil-cement pile supporting structures – the length of the piles, their diameter, the distance between the piles, the angle of their inclination and the feasibility of combining the piles with a concrete grillage. Originality. For the first time, the formation regularities of strength and stability of soil-cement supporting structure for strengthening the landslide-prone slopes are obtained, which makes it possible to predict their geomechanical stability depending on the possible location of the sliding surface curve. For the first time, the dependences of changes in absolute displacements, relative deformations, coefficients of strength, stability, as well as Mises stresses in the elements of supporting structures of soil-cement piles on the angle of their inclination, distance between piles and the presence of a concrete grillage that joins them. Methods for assessing and predicting the landslide danger of soil slopes were further developed, which allowed to substantiate the method of increasing the strength coefficient depending on the variation of the parameters of the soil-cement supporting structure. For the first time, the parameters of the method of increasing the stability of landslide-prone slopes with pile supporting structures based on the complex mathematical and centrifugal modeling using real landslides and similarity criteria are substantiated. Practical value. The authors have developed and patented a method of strengthening landslide slopes with the help of soil-cement piles, combined with a concrete grillage, located perpendicular to the movement vector of the landslide body.

scholarly journals A Novel Approach to Fabricate Foam Ceramics from Steel Slag

2020 ◽  
Vol 2020 ◽  
pp. 1-7
Author(s):  
Yu Zheng ◽  
Xudong Luo ◽  
Jinlong Yang ◽  
Wenlong Huo ◽  
Chi Kang
Keyword(s):  
Compressive Strength ◽  
Ph Value ◽  
Steel Slag ◽  
Raw Material ◽  
Solid Loading ◽  
Insulation Material ◽  
Ceramic Foams ◽  
Novel Approach ◽  
The Stability ◽  
First Time

A novel approach is used for fabricating steel slag foam ceramics based on the particle-stabilized foaming method. In this work, steel slag was used as the raw material and propyl gallate (PG) was used as the surface modifier. For the first time, steel slag ceramic foams were successfully fabricated based on particle-stabilized foams. The results show that the stability of the ceramic foams was closely related to the pH value and PG concentration. The porosity and compressive strength could be controlled by changing the solid loading of steel slag and sintering temperature. The porosity of steel slag foam ceramics ranged from 85.6% to 62.53%, and the compressive strength was from 1.74 MPa to 10.42 MPa. The thermal conductivity of steel slag foam ceramics was only 0.067 W (m·K)−1, which shows that it could be used as a thermal insulation material.

scholarly journals Temporal Stability and Biodiversity of Two Complex Antilisterial Cheese-Ripening Microbial Consortia

2003 ◽  
Vol 69 (7) ◽  
pp. 4012-4018 ◽  
Author(s):  
Ariel Maoz ◽  
Ralf Mayr ◽  
Siegfried Scherer
Keyword(s):  
Species Composition ◽  
Bacterial Species ◽  
Temporal Stability ◽  
Individual Characteristics ◽  
Microbial Consortia ◽  
Cheese Ripening ◽  
Safe Food ◽  
The Stability ◽  
The Individual ◽  
First Time

ABSTRACT The temporal stability and diversity of bacterial species composition as well as the antilisterial potential of two different, complex, and undefined microbial consortia from red-smear soft cheeses were investigated. Samples were collected twice, at 6-month intervals, from each of two food producers, and a total of 400 bacterial isolates were identified by Fourier-transform infrared spectroscopy and 16S ribosomal DNA sequence analysis. Coryneform bacteria represented the majority of the isolates, with certain species being predominant. In addition, Marinolactobacillus psychrotolerans, Halomonas venusta, Halomonas variabilis, Halomonas sp. (106 to 107 CFU per g of smear), and an unknown, gram-positive bacterium (107 to 108 CFU per g of smear) are described for the first time in such a consortium. The species composition of one consortium was quite stable over 6 months, but the other consortium revealed less diversity of coryneform species as well as less stability. While the first consortium had a stable, extraordinarily high antilisterial potential in situ, the antilisterial activity of the second consortium was lower and decreased with time. The cause for the antilisterial activity of the two consortia remained unknown but is not due to the secretion of soluble, inhibitory substances by the individual components of the consortium. Our data indicate that the stability over time and a potential antilisterial activity are individual characteristics of the ripening consortia which can be monitored and used for safe food production without artificial preservatives.

Discrete-Time H-Infinity Synthesis of Frequency-Shaped Sliding Mode Control for Suppression of Vibration With Multiple Peak Frequencies

2016 ◽  
Author(s):  
Minghui Zheng ◽  
Masayoshi Tomizuka
Keyword(s):  
High Frequency ◽  
Sliding Mode ◽  
Disk Drive ◽  
Sliding Surface ◽  
Surface Dynamics ◽  
H Infinity ◽  
High Frequencies ◽  
Multiple Peak ◽  
Significant Performance ◽  
The Stability

Vibration with multiple large peaks at high frequencies may cause significant performance degradation and have become a major concern in modern high precision control systems. To deal with such high-frequency peaks, it is proposed to design a frequency-shaped sliding mode controller based on H∞ synthesis. It obtains an ‘optimal’ filter to shape the sliding surface, and thus provides frequency-dependent control allocation. The proposed frequency-shaping method assures the stability in the presence of multiple-peak vibration sources, and minimizes the weighted H∞ norm of the sliding surface dynamics. The evaluation is performed on a simulated hard disk drive with actual vibration sources from experiments, and the effectiveness of large vibration peak suppression is demonstrated.

LPV Based Sliding Mode Control for Limit Protection of Aircraft Engines

2018 ◽  
Author(s):  
Shubo Yang ◽  
Xi Wang
Keyword(s):  
Closed Loop ◽  
Sliding Mode ◽  
Aircraft Engine ◽  
Gain Scheduling ◽  
Engine Control ◽  
Aircraft Engines ◽  
Sliding Surface ◽  
Closed Loop System ◽  
Limit Protection ◽  
The Stability

Limit protection, which frequently exists as an auxiliary part in control systems, is not the primary motive of control but is a necessary guarantee of safety. As in the case of aircraft engine control, the main objective is to provide the desired thrust based on the position of the throttle; nevertheless, limit protection is indispensable to keep the engine operating within limits. There are plenty of candidates that can be applied to design the regulators for limit protection. PID control with gain-scheduling technique has been used for decades in the aerospace industry. This classic approach suggests linearizing the original nonlinear model at different power-level points, developing PID controllers correspondingly, and then scheduling the linear time-invariant (LTI) controllers according to system states. Sliding mode control (SMC) is well-known with mature theories and numerous successful applications. With the one-sided convergence property, SMC is especially suitable for limit protection tasks. In the case of aircraft engine control, SMC regulators have been developed to supplant traditional linear regulators, where SMC can strictly keep relevant outputs within their limits and improve the control performance. In aircraft engine control field, we all know that the plant is a nonlinear system. However, the present design of the sliding controller is carried out with linear models, which severely restricts the valid scope of the controller. Even if the gain scheduling technique is adopted, the stability of the whole systems cannot be theoretically proved. Research of linear parameter varying (LPV) system throws light on a class of nonlinear control problems. In present works, we propose a controller design method based on the LPV model to solve the engines control problem and achieve considerable effectiveness. In this paper, we discuss the design of a sliding controller for limit protection task of aircraft engines, the plant of which is described as an LPV system instead of LTI models. We define the sliding surface as tracking errors and, with the aid of vertex property, present the stability analysis of the closed-loop system on the sliding surface. An SMC law is designed to guarantee that the closed-loop system is globally attracted to the sliding surface. Hot day (ISA+30° C) takeoff simulations based on a reliable turbofan model are presented, which test the proposed method for temperature protection and verify its stability and effectiveness.

scholarly journals Crosstalk between β-catenin and WT1 signalling activity in acute myeloid leukemia

2021 ◽  
Author(s):  
Megan Payne ◽  
Olga Tsaponina ◽  
Gillian Caalim ◽  
Hayley Greenfield ◽  
Leanne Milton-Harris ◽  
...  
Keyword(s):  
Protein Interactions ◽  
Myeloid Leukemia ◽  
Normal Development ◽  
Signal Transduction Pathway ◽  
Myeloid Cell ◽  
Wnt Signalling ◽  
Protein Protein Interactions ◽  
The Stability ◽  
First Time ◽  
Acute Myeloid

Wnt signalling is an evolutionary conserved signal transduction pathway heavily implicated in normal development and disease. The central mediator of this pathway, β-catenin, is frequently overexpressed, mislocalised and overactive in acute myeloid leukaemia (AML) where it mediates the establishment, maintenance and drug resistance of leukaemia stem cells. Critical to the stability, localisation and activity of β-catenin are the protein-protein interactions it forms, yet these are poorly defined in AML. We recently performed the first β-catenin interactome study in blood cells of any kind and identified a plethora of novel interacting partners. This study shows for the first time that β-catenin interacts with Wilms tumour protein (WT1), a protein frequently overexpressed and mutated in AML, in both myeloid cell lines and also primary AML samples. We demonstrate crosstalk between the signalling activity of these two proteins in myeloid cells, and show that modulation of either protein can affect expression of the other. Finally, we demonstrate that WT1 mutations frequently observed in AML can increase stabilise β-catenin and augment Wnt signalling output. This study has uncovered new context-dependent molecular interactions for β-catenin which could inform future therapeutic strategies to target this dysregulated molecule in AML.

scholarly journals Consistency and Stability of Motor Subtype Classifications in Patients With de novo Parkinson’s Disease

2021 ◽  
Vol 15 ◽  
Author(s):  
Jingru Ren ◽  
Chenxi Pan ◽  
Yuqian Li ◽  
Lanting Li ◽  
Ping Hua ◽  
...  
Keyword(s):  
Parkinson’S Disease ◽  
Parkinson's Disease ◽  
De Novo ◽  
Classification Systems ◽  
Motor Symptoms ◽  
Chi Squared ◽  
Baseline Evaluation ◽  
The Stability ◽  
First Time ◽  
Non Motor Symptoms

ObjectivePatients with Parkinson’s disease (PD) are commonly classified into subtypes based on motor symptoms. The aims of the present study were to determine the consistency between PD motor subtypes, to assess the stability of PD motor subtypes over time, and to explore the variables influencing PD motor subtype stability.MethodsThis study was part of a longitudinal study of de novo PD patients at a single center. Based on three different motor subtype classification systems proposed by Jankovic, Schiess, and Kang, patients were respectively categorized as tremor-dominant/indeterminate/postural instability and gait difficulty (TD/indeterminate/PIGD), TDS/mixedS/akinetic-rigidS (ARS), or TDK/mixedK/ARK at baseline evaluation and then re-assessed 1 month later. Demographic and clinical characteristics were recorded at each evaluation. The consistency between subtypes at baseline evaluation was assessed using Cohen’s kappa coefficient (κ). Additional variables were compared between PD subtype groups using the two-sample t-test, Mann–Whitney U-test or Chi-squared test.ResultsOf 283 newly diagnosed, untreated PD patients, 79 were followed up at 1 month. There was fair agreement between the Jankovic, Schiess, and Kang classification systems (κS = 0.383 ± 0.044, κK = 0.360 ± 0.042, κSK = 0.368 ± 0.038). Among the three classification systems, the Schiess classification was the most stable and the Jankovic classification was the most unstable. The non-motor symptoms questionnaire (NMSQuest) scores differed significantly between PD patients with stable and unstable subtypes based on the Jankovic classification (p = 0.008), and patients with a consistent subtype had more severe NMSQuest scores than patients with an inconsistent subtype.ConclusionFair consistency was observed between the Jankovic, Schiess, and Kang classification systems. For the first time, non-motor symptoms (NMSs) scores were found to influence the stability of the TD/indeterminate/PIGD classification. Our findings support combining NMSs with motor symptoms to increase the effectiveness of PD subtypes.

scholarly journals Technical Note: Regularization performances with the error consistency method in the case of retrieved atmospheric profiles

2006 ◽  
Vol 6 (6) ◽  
pp. 13307-13321
Author(s):  
S. Ceccherini ◽  
C. Belotti ◽  
B. Carli ◽  
P. Raspollini ◽  
M. Ridolfi
Keyword(s):  
Regularization Parameter ◽  
Technical Note ◽  
Field Of View ◽  
Regularization Methods ◽  
Vertical Profiles ◽  
Vertical Resolution ◽  
Vertical Field ◽  
The Stability ◽  
First Time ◽  
Consistency Method

Abstract. The retrieval of concentration vertical profiles of atmospheric constituents from spectroscopic measurements is often an ill-conditioned problem and regularization methods are frequently used to improve its stability. Recently a new method, that provides a good compromise between precision and vertical resolution, was proposed to determine analytically the value of the regularization parameter. This method is applied for the first time to real measurements with its implementation in the operational retrieval code of the satellite limb-emission measurements of the MIPAS instrument and its performances are quantitatively analyzed. The adopted regularization improves the stability of the retrieval providing smooth profiles without major degradation of the vertical resolution. In the analyzed measurements the retrieval procedure provides a vertical resolution that, in the troposphere and low stratosphere, is smaller than the vertical field of view of the instrument.

scholarly journals A SLR Pre-Processing Algorithm Based on Satellite Signature Effect

2021 ◽  
Vol 11 (19) ◽  
pp. 8880
Author(s):  
Bowen Guan ◽  
Cunbo Fan ◽  
Ning An ◽  
Ricardo Cesar Podesta ◽  
Dra Ana Pacheco ◽  
...  
Keyword(s):  
Mean Value ◽  
Observation Data ◽  
Short Term ◽  
Error Sources ◽  
Effect Model ◽  
The Mean ◽  
The Stability ◽  
First Time ◽  
Satellite Signature Effect

As one of the major error sources, satellite signature effect should be reduced or even erased from the distribution of the post-fit residuals to improve the ranging precision. A simulation of satellite signature effect removal process for normal point algorithm is conducted based on a revised model of satellite response, which fully considers the structural and distribution characteristics of retroreflectors. In order to eliminate both long-term and short-term satellite signature effect, a clipping method for SLR data processing is proposed by defining the clipping location as 5.6 mm away from the mean value of the long-term fit residuals to select effective returns for normal points. The results indicate that, compared to normal points algorithm, the RMS per NP of LAGEOS-1 observation data processed by the clipping method is reduced from 62.90 ± 9.9 mm to 56.07 ± 4.69 mm, and the stability of RMS is improved 53%. This study improves the satellite signature effect model and simulates the fluctuation of normal points caused by satellite signature effect for the first time. The new method based on the simulation of satellite signature effect has stronger robustness and applicability, which can further minimize the influence of satellite signature effect on the SLR production and significantly improve the data property.

Sign in / Sign up

Export Citation Format

Share Document