Comparative study of the force action of harvester work tools on potato tubers

2019 ◽  
Vol 65 (No. 3) ◽  
pp. 85-90
Author(s):  
Alexei Sibirev ◽  
Alexandr Aksenov ◽  
Alexei Dorokhov ◽  
Andrei Ponomarev
Keyword(s):  
Field Studies ◽  
Potato Tubers ◽  
Cultivation Conditions ◽  
Root Crops ◽  
Negative Impacts ◽  
Working Bodies ◽  
The Individual ◽  
Separation Devices ◽  
The Impact

The quality of the separation of root crops, onions and potatoes is known to primarily depend on the cultivation conditions. As a rule, these cultures are cultivated in mechanically light soils in order to improve the quality of separation, as well as to reduce the traction resistance of the harvester when extracting the root crops from the soil. When harvesting the root crops, it is very important to maintain the soil in a loose (light) state to improve the quality of the separation. Due to the fact that in digging up the root crops, there is a joint flow of strong soil lumps to the separating working bodies, which are difficult to separate on the slit working bodies of the harvester, which increases damage to the root crops when interacting with the soil lumps, the commercial quality of the products is subsequently deteriorated. The existing potato harvesters damage the commercial products as a result of the interaction of the potato tubers with each other, with the working bodies and with the soil lumps. However, the greatest percentage of damage to potato tubers occurs as a result of their interaction with the working bodies of the harvester. Field studies were conducted to determine the places of the greatest impact of the individual working bodies of the potato harvesters and to carry out subsequent actions for the elimination of these negative impacts in the design of the harvesters. This article presents a methodology for conducting field studies on the assessment of the impact of the working bodies on the scale of damage to potato tubers when harvesting. The results of the comparative studies of the impact of the working bodies of modern potato harvesters, which damage the potato tubers as a result of the interaction with them are presented. We have determined that the greatest scale of impact on the potato tubers during the mechanised harvesting is observed as the transition from the main elevator to the secondary separation devices takes place, irrespective of the design and technological scheme of the harvester, and reaches its minimum value from 6.5 N for the Bolko harvester to 21 N for the AVR-Spirit-6200 harvester.

scholarly journals Results of research on the intensification of the process of cleaning potato tubers by ultrasonic action and their subsequent storage

2020 ◽  
Vol 217 ◽  
pp. 09008
Author(s):  
A. Dorokhov ◽  
A. Aksenov ◽  
A. Manokhina ◽  
M. Mosyakov
Keyword(s):  
Soil Layer ◽  
Potato Tubers ◽  
Technological Parameters ◽  
Ultrasonic Action ◽  
Agricultural Enterprises ◽  
Root Crops ◽  
Ultrasonic Equipment ◽  
Negative Impacts ◽  
Working Bodies ◽  
Subsequent Storage

The data on the gross harvest of tubers in the Russian Federation are given: approximately 71% of potatoes are produced by the population, 17.4% by agricultural enterprises and 11.5% by farms. It is noted that in the industrial production of potatoes, negative impacts on the soil are associated with crushing and removal of the fertile soil layer, which arise in the process of extracting root crops by the digging and separating working bodies of the harvesting machines. It is proposed to use ultrasonic action on root crops for cleaning them from soil impurities. It was determined that in order to intensify the process of cleaning tubers by ultrasonic action during harvesting, it is necessary to provide operating and technological parameters (frequency of ultrasound oscillations f1 = 48 kHz, vibration intensity S = 42 W/cm², exposure time t = 90 s) of ultrasonic equipment, which will ensure the completeness purification is not less than 84.7%.The results of comparative studies on the intensification of the cleaning of potato tubers allow us to conclude that, regardless of the mass and type of pollution, the greatest positive effect of ultrasonic exposure is observed when processing tubers, the completeness of cleaning of which is on average 13-20% higher.

scholarly journals Knowledge sharing in open source software communities: motivations and management

2015 ◽  
Vol 19 (4) ◽  
pp. 791-813 ◽  
Author(s):  
Zilia Iskoujina ◽  
Joanne Roberts
Keyword(s):  
Knowledge Sharing ◽  
Open Source ◽  
Open Source Software ◽  
Online Communities ◽  
Descriptive Analysis ◽  
Online Questionnaire ◽  
Content Type ◽  
The Individual ◽  
The Impact

Purpose – This paper aims to add to the understanding of knowledge sharing in online communities through an investigation of the relationship between individual participant’s motivations and management in open source software (OSS) communities. Drawing on a review of literature concerning knowledge sharing in organisations, the factors that motivate participants to share their knowledge in OSS communities, and the management of such communities, it is hypothesised that the quality of management influences the extent to which the motivations of members actually result in knowledge sharing. Design/methodology/approach – To test the hypothesis, quantitative data were collected through an online questionnaire survey of OSS web developers with the aim of gathering respondents’ opinions concerning knowledge sharing, motivations to share knowledge and satisfaction with the management of OSS projects. Factor analysis, descriptive analysis, correlation analysis and regression analysis were used to explore the survey data. Findings – The analysis of the data reveals that the individual participant’s satisfaction with the management of an OSS project is an important factor influencing the extent of their personal contribution to a community. Originality/value – Little attention has been devoted to understanding the impact of management in OSS communities. Focused on OSS developers specialising in web development, the findings of this paper offer an important original contribution to understanding the connections between individual members’ satisfaction with management and their motivations to contribute to an OSS project. The findings reveal that motivations to share knowledge in online communities are influenced by the quality of management. Consequently, the findings suggest that appropriate management can enhance knowledge sharing in OSS projects and online communities, and organisations more generally.

An Analysis on Human Resource Development Culture and Climate of Chemical Based Public Sector Enterprises in Kerala, India

2021 ◽  
Vol 2021 (6) ◽  
pp. 132-135
Author(s):  
Balakrishnan A ◽  
Dr. KVM Varambally
Keyword(s):  
Public Sector ◽  
Human Resource Development ◽  
Human Resource ◽  
Deep Structure ◽  
Positive Culture ◽  
Resource Development ◽  
The Individual ◽  
The Impact ◽  
Culture And Climate

The impact of Globalization creates a competitive horizon with new markets, new products, new mindsets, new competencies, and new ways of thinking about business. As an outcome of this, the market places become more complex, uncertain, competitive, and transformational. In this era, the major challenge faced by any organization is to maintain a peaceful as well positive culture and climate inside the organization. The human resource development climate of an organization plays a significant role in ensuring the competency, motivation, and development of its employees. Here the term climate denotes the quality of the internal environment. It influences morale and the attitudes of the individual toward his work and his environment. Culture refers to the deep structure of organizations, which is rooted in the values, beliefs, and assumptions held by organizational members. The study was aimed to analyze the Human Resource Development culture and climate of chemical-based public sector enterprises in Kerala. The results indicated that the Human Resource Development climate in an organization is average and the perception of employees regarding Human Resource Development culture and climate does not differs significantly based on age, job approval status, and qualification. But it differs significantly based on gender and experiences.

scholarly journals The Impact of the Quality Assessment of Optimal Assignment for Data Association in a Multitarget Tracking Context

2015 ◽  
Vol 15 (7) ◽  
pp. 88-98
Author(s):  
J. Dezert ◽  
A. Tchamova ◽  
P. Konstantinova
Keyword(s):  
Quality Assessment ◽  
Data Association ◽  
New Method ◽  
Multitarget Tracking ◽  
Belief Functions ◽  
Tracking Systems ◽  
Optimal Assignment ◽  
The Individual ◽  
The Impact

Abstract The main purpose of this paper is to apply and to test the performance of a new method, based on belief functions, proposed by Dezert et al. in order to evaluate the quality of the individual association pairings provided in the optimal data association solution for improving the performances of multisensor-multitarget tracking systems. The advantages of its implementation in an illustrative realistic surveillance context, when some of the association decisions are unreliable and doubtful and lead to potentially critical mistake, are discussed. A comparison with the results obtained on the base of Generalized Data Association is made.

scholarly journals Automated Line for Post-Harvest Processing of Root Crops and Potatoes

2020 ◽  
Vol 14 (1) ◽  
pp. 22-26
Author(s):  
A. S. Dorokhov ◽  
M. A. Mosyakov ◽  
N. V. Sazonov
Keyword(s):  
Block Diagram ◽  
Basic Block ◽  
Potato Tubers ◽  
Labor Costs ◽  
System Operation ◽  
Line System ◽  
Post Harvest ◽  
Root Crops ◽  
Automated Line

In the process of post-harvest processing of root crops and potatoes in Russia, mechanical sortings of various types are used, which allows to separate the material according to the size criterion and removing impurities. The main requirement for this equipment is to ensure the quality and reliability of technological processes for the impurities separation and the root crops separation into fractions with minimal damage. (Research purpose) To improve the quality of potato tubers sorting using an automated line for post-harvest processing of root crops and potatoes, which allows to reduce their damage and ensure high accuracy of separation into fractions by size. (Materials and methods) The authors studied the automated process of root crops post-harvest processing. They developed approaches and basic technical, technological and constructive solutions aimed at improving the efficiency of root crops and potatoes post-harvest processing. To automate the root crops and potatoes processing, the authors installed the universal web camera Logitech HD Pro C920. They created a basic block diagram of the electronic line system operation. (Results and discussion) The authors clarified the size and mass characteristics of potato tubers with a total weight of 38 356 grams of Nevsky variety of the 2019 harvest and their shape coefficient. They developed design documentation. An experimental line was prepared for potato tubers post-harvest sorting with an original circuit diagram of the electronic system operation. The authors substantiated its design and operational-technological parameters. Practical studies of the automated line work were carried out in the Ryazan region on the basis of the Institute of Seed Production and Agrotechnologies – a branch of the Federal Scientific Agroengineering Center VIM. (Conclusions) The authors determined that the developed automated line for root crops and potatoes post-harvest sorting thanks to digital technologies reduced labor costs by eliminating manual sorting, as well as improving the quality of potato tubers and the accuracy of sorting by size to 95-98 percent. It was revealed that damage to potato tubers did not exceed one percent.

scholarly journals ADAPTASI MODEL DELONE DAN MCLEAN YANG DIMODIFIKASI GUNA MENGUJI KEBERHASILAN IMPLEMENTASI APLIKASI OPERASIONAL BAITUL MAAL WAT TAMWIL (BMT) BAGI INDIVIDU PENGGUNA (Studi Empiris Pada BMT di Kota Semarang)

2016 ◽  
Vol 4 (2) ◽  
pp. 123
Author(s):  
Novita Anugrah Listiyana ◽  
Dedi Rusdi
Keyword(s):  
Path Analysis ◽  
User Satisfaction ◽  
Sampling Technique ◽  
Individual Performance ◽  
Quality System ◽  
Quality Of Information ◽  
Positive Direction ◽  
The Individual ◽  
The Impact

This study analyzed the relationship between humans as users of the system and application software as object an inseparable relationship. The purpose of this study was to analyze the effect of variable quality system to the perception of the quality system, the effect of perceived quality system and quality of information on the intensity of use and user satisfaction, and the influence of the intensity of use and user satisfaction of the impact of individual performance. This research is an empirical study using purposive sampling technique in data collection. Data were collected through  questionnaires to 39 BMT’s operational employees. Then, performed an analysis of the data obtained used path analysis. This included: testing hypotheses through path analysis. The results of tests performed using path analysis to get the results that each variable in the model of equation 4 had a coefficient with a positive direction. This means that the improvement of the quality of the system will be able to improve the quality of information for the individual impact of the use and satisfaction of employees through the use of the system.

Exploring mass customization and textile application in medical products: re-designing scoliosis brace for shorter production lead time and better quality of life

2020 ◽  
Vol 90 (19-20) ◽  
pp. 2304-2321
Author(s):  
Olivia Ho-Yi Fung ◽  
Joanne Yip ◽  
Mei-Chun Cheung ◽  
Kit-Lun Yick ◽  
Kenny Yat-Hong Kwan ◽  
...  
Keyword(s):  
Quality Of Life ◽  
Patient Compliance ◽  
Mass Customization ◽  
Lead Time ◽  
Interface Pressure ◽  
Negative Impacts ◽  
Exerted Pressure ◽  
The Impact

Bracing is the most common non-operative treatment option for patients with adolescent idiopathic scoliosis (AIS). However, existing brace designs have deficiencies, including a long production lead time and low patient compliance caused by the negative impacts of bracing on quality of life (QoL). The aim of this study was to address these problems by developing a new textile-based scoliosis brace in accordance with the biomechanics used in the existing braces for spinal correction. A case study of interface pressure had been carried out to determine the optimum combination of pads to be used in the proposed brace to correct a scoliotic spine. AIS patients who were undergoing hard brace treatment were recruited to complete a questionnaire (BrQ) on hard braces and on the proposed brace. The BrQ scores of the two types of braces were compared to assess their respective impacts on the QoL. The findings show that the proposed brace can address the issue of patient compliance by reducing the impact of bracing on QoL, and shorten the production lead time through incorporation of the mass customization concept into the design. Similar to most of the commonly-used scoliosis braces, the selected combination of pads used in the proposed brace for spinal correction shows a sufficient amount of exerted pressure and a similar function of active spinal correction.

scholarly journals Water Quality of Freshwater Ecosystems in a Temperate Climate

Water ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 2643
Author(s):  
Piotr Klimaszyk ◽  
Ryszard Gołdyn
Keyword(s):  
Water Quality ◽  
Freshwater Ecosystems ◽  
Temperate Climate ◽  
Special Issue ◽  
Quality Of Water ◽  
Local Water ◽  
Water Ecosystems ◽  
The Individual ◽  
The Impact

Water is the substance that made life on Earth possible. It plays a key role in both the individual and population development of all species. Water is also a critical resource for humans as populations continue to grow and climate change affects global and local water cycles. Water is a factor limiting economic development in many regions of the world. Under these conditions, good water quality becomes an extremely important factor that determines its economic utility, including water supply, recreation, and agriculture. Proper water quality maintenance of freshwater ecosystems is also very important for preserving biodiversity. The quality of water depends on many factors, the most important of which are related to human impact on water ecosystems, especially the impact of various pollutants from municipal economy, industry and agriculture. Hydrotechnical changes, such as river damming, drainage processes and water transport between catchments also have a significant impact. Water quality is also dependent on the impact of natural conditions connected, e.g., with climate, catchment, water organisms and their interactions within the food-webs, etc. This Special Issue consists of fourteen original scientific papers concerning different problems associated with the water quality of freshwater ecosystems in a temperate climate. Most of the articles deal with the relations between water quality and the structure of ecosystem biocenoses. The conclusion of these articles confirms the fact that the deterioration of water quality has a direct impact on the quantitative and qualitative structure of biocenoses. This is accompanied by a decline in biodiversity and the disappearance of rare plant and animal species. They also draw attention to the particular importance of internal physical and chemical differentiation within the aquatic ecosystem, both in horizontal and vertical dimensions. The problem of ensuring proper ecological conditions and good quality of water in freshwater aquatic ecosystems is also raised, and methods for the restoration of water bodies are presented. The majority of the research presented in this Special Issue was carried out in Central Europe, and one of the papers concerns the area of West Africa—the edge of temperate climate zone.

Formation of the Economic Model and the Impact of Economic Factors on the Health of Russian Population

2018 ◽  
Vol 8 (8) ◽  
pp. 2557
Author(s):  
Tamara G. ROMANOVA ◽  
Valentina D. BATOMUNKUEVA ◽  
Tatiana K. GYRGENOVA ◽  
Nataliya V. MONGOLOVA ◽  
Roman Zh. TSYDYPOV
Keyword(s):  
Federal District ◽  
The State ◽  
Economic Losses ◽  
Economic Factors ◽  
Main Task ◽  
Public Benefit ◽  
Level Model ◽  
The Individual ◽  
The Impact

The article is about the influence of economic factors on the health quality of the population as a public benefit. Health of the individual has an important role in national economy, both in processes of formation of public health, and in reproduction of quality of a manpower. The review of the indicators of evaluation test of health of the population applied in the Russian practice is given in article. Health of the population and economy of the state have close interrelation and interdependence: not only the economy influences health of the population, but also health of the population affects the economy of the state. The technique allowing to assess economic damages from loss of health on the basis of which economic losses from mortality of the population at working-age in Siberian Federal District are estimated is presented. The economic three-level model of health upgrading of the population allows to reveal paths of health upgrading for improvement of economy in the country is developed. The three-level model reflects preventive character with obligatory selection of the measures accompanying achievement of the main task – to upgrade the population health as the public benefit and to increase the level of economy.

scholarly journals CITIZEN PARTICIPATION, QUALITY OF LIFE AND TERRITORIAL TRANS-REGIONAL JUSTICE: A SOCIAL BASIS FOR COMMON GOOD

2017 ◽  
Vol 20 (1) ◽  
pp. 21-42 ◽  
Author(s):  
JORGE ROJAS HERNÁNDEZ
Keyword(s):  
Quality Of Life ◽  
Environmental Impacts ◽  
Citizen Participation ◽  
Common Good ◽  
Criteria And Indicators ◽  
Social Basis ◽  
Negative Impacts ◽  
The Impact ◽  
Social And Environmental Impacts

Abstract For globalized local worlds undergoing transformation, territorial interventions are increasingly producing larger social and environmental impacts. Macro-interventions profoundly alter the functioning of ecosystems and human habitats or communities, becoming inclusive in extreme situations of exploitation or extraction, risking their very existence. Therefore it is necessary to develop a system or Social Baseline that clearly establishes the philosophical bases, restrictions and criteria that regulate and curb the negative impacts of such interventions. This implies defining methods for citizen participation. This article focuses on defining a basic framework with criteria and indicators that regulate the impact of macro-interventions - of different natures - on human territories and communities.

Sign in / Sign up

Export Citation Format

Share Document