scholarly journals Machine-Learning-Based High-Resolution Earthquake Catalog Reveals How Complex Fault Structures Were Activated during the 2016–2017 Central Italy Sequence

2021 ◽  
Vol 1 (1) ◽  
pp. 11-19
Author(s):  
Yen Joe Tan ◽  
Felix Waldhauser ◽  
William L. Ellsworth ◽  
Miao Zhang ◽  
Weiqiang Zhu ◽  
...  
Keyword(s):  
Central Italy ◽  
Normal Fault ◽  
Earthquake Sequence ◽  
Fault System ◽  
Earthquake Catalog ◽  
Earthquake Triggering ◽  
Aftershock Activity ◽  
Arrival Times ◽  
Complex Fault ◽  
Fault Structures

Abstract The 2016–2017 central Italy seismic sequence occurred on an 80 km long normal-fault system. The sequence initiated with the Mw 6.0 Amatrice event on 24 August 2016, followed by the Mw 5.9 Visso event on 26 October and the Mw 6.5 Norcia event on 30 October. We analyze continuous data from a dense network of 139 seismic stations to build a high-precision catalog of ∼900,000 earthquakes spanning a 1 yr period, based on arrival times derived using a deep-neural-network-based picker. Our catalog contains an order of magnitude more events than the catalog routinely produced by the local earthquake monitoring agency. Aftershock activity reveals the geometry of complex fault structures activated during the earthquake sequence and provides additional insights into the potential factors controlling the development of the largest events. Activated fault structures in the northern and southern regions appear complementary to faults activated during the 1997 Colfiorito and 2009 L’Aquila sequences, suggesting that earthquake triggering primarily occurs on critically stressed faults. Delineated major fault zones are relatively thick compared to estimated earthquake location uncertainties, and a large number of kilometer-long faults and diffuse seismicity were activated during the sequence. These properties might be related to fault age, roughness, and the complexity of inherited structures. The rich details resolvable in this catalog will facilitate continued investigation of this energetic and well-recorded earthquake sequence.

scholarly journals Workflow of Digital Field Mapping and Drone-Aided Survey for the Identification and Characterization of Capable Faults: The Case of a Normal Fault System in the Monte Nerone Area (Northern Apennines, Italy)

2020 ◽  
Vol 9 (11) ◽  
pp. 616
Author(s):  
Mauro De Donatis ◽  
Mauro Alberti ◽  
Mattia Cipicchia ◽  
Nelson Muñoz Guerrero ◽  
Giulio F. Pappafico ◽  
...  
Keyword(s):  
Central Italy ◽  
Three Dimensional ◽  
Normal Fault ◽  
Field Work ◽  
Digital Data ◽  
Fault System ◽  
Seismic Profiles ◽  
Postgraduate Students ◽  
Recent Earthquakes

Field work on the search and characterization of ground effects of a historical earthquake (i.e., the Cagli earthquake in 1781) was carried out using terrestrial and aerial digital tools. The method of capturing, organizing, storing, and elaborating digital data is described herein, proposing a possible workflow starting from pre-field project organization, through reiteration of field and intermediate laboratory work, to final interpretation and synthesis. The case of one of the most important seismic events in the area of the northern Umbria–Marche Apennines provided the opportunity to test the method with both postgraduate students and researchers. The main result of this work was the mapping of a capable normal fault system with a great number of observations, as well as a large amount of data, from difficult outcrop areas. A GIS map and a three-dimensional (3D) model, with the integration of subsurface data (i.e., seismic profiles and recent earthquake distribution information), allowed for a new interpretation of an extensional tectonic regime of this Apennines sector, similar to one of the southernmost areas of central Italy where recent earthquakes occurred on 2016.

scholarly journals Surface Faulting Caused by the 2016 Central Italy Seismic Sequence: Field Mapping and LiDAR/UAV Imaging

2018 ◽  
Vol 34 (4) ◽  
pp. 1585-1610 ◽  
Author(s):  
Stefano Gori ◽  
Emanuela Falcucci ◽  
Fabrizio Galadini ◽  
Paolo Zimmaro ◽  
Alberto Pizzi ◽  
...  
Keyword(s):  
Imaging Techniques ◽  
Central Italy ◽  
Normal Fault ◽  
Fault System ◽  
Surface Rupture ◽  
Field Mapping ◽  
Central Italy Earthquake ◽  
Levels Of Detail ◽  
Main Fault ◽  
Surface Ruptures

The three mainshock events (M6.1 24 August, M5.9 26 October, and M6.5 30 October 2016) in the Central Italy earthquake sequence produced surface ruptures on known segments of the Mt. Vettore–Mt. Bove normal fault system. As a result, teams from Italian national research institutions and universities, working collaboratively with the U.S. Geotechnical Extreme Events Reconnaissance Association (GEER), were mobilized to collect perishable data. Our reconnaissance approach included field mapping and advanced imaging techniques, both directed towards documenting the location and extent of surface rupture on the main fault exposure and secondary features. Mapping activity occurred after each mainshock (with different levels of detail at different times), which provides data on the progression of locations and amounts of slip between events. Along the full length of the Mt. Vettore–Mt. Bove fault system, vertical offsets ranged from 0–35 cm and 70–200 cm for the 24 August and 30 October events, respectively. Comparisons between observed surface rupture displacements and available empirical models show that the three events fit within expected ranges.

Active Faulting in Source Region of 2016–2017 Central Italy Event Sequence

2018 ◽  
Vol 34 (4) ◽  
pp. 1557-1583 ◽  
Author(s):  
Fabrizio Galadini ◽  
Emanuela Falcucci ◽  
Stefano Gori ◽  
Paolo Zimmaro ◽  
Daniele Cheloni ◽  
...  
Keyword(s):  
Source Region ◽  
Central Italy ◽  
Active Faults ◽  
Earthquake Sequence ◽  
Fault System ◽  
Fault Plane Solutions ◽  
Moment Tensors ◽  
Central Italy Earthquake ◽  
Finite Fault ◽  
Main Shocks

The Central Italy earthquake sequence produced three main shocks: M6.1 24 August, M5.9 26 October, and M6.5 30 October 2016. Additional M5–5.5 events struck this territory on 18 January 2017 in the Campotosto area. Fault plane solutions for the main shocks exhibit normal faulting (characteristic of crustal extension occurring in the inner central Apennines). Significant evidence, including hypocenter locations, strike and dip angles of the moment tensors, inverted finite fault models (using GPS, interferometric aperture radar, and ground motion data), and surface rupture patterns, all point to the earthquakes having been generated on the Mt. Vettore–Mt. Bove fault system (all three main shocks) and on the Amatrice fault, in the northern sector of the Laga Mountains (portion of 24 August event). The earthquake sequence provides examples of both synthetic and antithetic ruptures on a single fault system (30 October event) and rupture between two faults (24 August event). We describe active faults in the region and their segmentation and present understanding of the potential for linkages between segments (or faults) in the generation of large earthquakes.

Sequential modelling of the 2016 Central Italy earthquake cluster using multisource satellite observations and quantitative assessment of Coulomb stress change

2020 ◽  
Vol 221 (1) ◽  
pp. 451-466 ◽  
Author(s):  
Qian Xu ◽  
Qiang Chen ◽  
Jingjing Zhao ◽  
Xianwen Liu ◽  
Yinghui Yang ◽  
...  
Keyword(s):  
Surface Deformation ◽  
Central Italy ◽  
Normal Fault ◽  
Satellite Observations ◽  
Fault System ◽  
Potential Zone ◽  
Seismic Zone ◽  
Seismogenic Fault ◽  
Positive Effects ◽  
Sequence Of Events

SUMMARY A sequence of earthquake events consisting of three large shocks occurred in Central Italy from August to October in 2016 with the duration of almost 2 months. The preliminary study on the seismic mechanism suggests that the sequence of events is the result from the activity of the SW dipping Mt Bove–Mt Vettore–Mt Gorzano normal fault system. For investigation and understanding of the coseismic faulting of the seismogenic fault alignment, we collect a set of comprehensive satellite observations including the Sentinel-1A, ALOS-2/PALSAR-2 and GPS data to map the coseismic surface deformation and estimate the source models in this study. The derived faulting model for the first Amatrice event is characterized by two distinct slip asperities suggesting that it is a predominantly normal dip-slip motion with slight strike-slip component. The second event, Visso earthquake is almost a purely normal rupture. The third Norcia event is dominated by the normal dip-slip rupture of the seismogenic fault, and has propagated up to the ground with significant slip. The three faulting models are then utilized to quantify the Coulomb failure stress (CFS) change over the seismic zone. First, the CFS change on the subsequent two seismogenic faults of the earthquake sequence is estimated, and the derived positive CFS change induced by the preceding earthquakes suggests that the early events have positive effects on triggering the subsequent seismicity. We then explore the response relation of the aftershocks including 961 events with magnitudes larger than M 3.0 to the CFS change over the seismic zone. It suggests that the rupture pattern of the aftershocks is similar to the major shocks with predominantly normal dip-slip. To assess the risk of the future seismic hazard, we analyse quantitatively the spatial distribution of aftershock occurrence and CFS transfer at the seismogenic depth, indicating that the ruptures of the three major shocks do partly release the accumulated strain on the associated fault alignment as well as the dense aftershock, but the CFS increase zone with few aftershocks in the southwest of the eastern Quaternary fault alignment of Central Italy poses the potential of further rupture. In particular, the distribution of aftershock migration also suggests that the north extension of the Mt Bove fault is the potential zone with rupture risk.

A High-Resolution Seismic Catalog for the Initial 2019 Ridgecrest Earthquake Sequence: Foreshocks, Aftershocks, and Faulting Complexity

2020 ◽  
Vol 91 (4) ◽  
pp. 1971-1978 ◽  
Author(s):  
David R. Shelly
Keyword(s):  
High Resolution ◽  
Template Matching ◽  
Earthquake Sequence ◽  
Earthquake Catalog ◽  
Surface Rupture ◽  
Initial Portion ◽  
Multiple Fault ◽  
Fault Structures ◽  
Seismic Catalog ◽  
Complex Distribution

Abstract I use template matching and precise relative relocation techniques to develop a high-resolution earthquake catalog for the initial portion of the 2019 Ridgecrest earthquake sequence, from 4 to 16 July, encompassing the foreshock sequence and the first 10+ days of aftershocks following the Mw 7.1 mainshock. Using 13,525 routinely cataloged events as waveform templates, I detect and precisely locate a total of 34,091 events. Precisely located earthquakes reveal numerous crosscutting fault structures with dominantly perpendicular southwest and northwest strikes. Foreshocks of the Mw 6.4 event appear to align on a northwest-striking fault. Aftershocks of the Mw 6.4 event suggest that it further ruptured this northwest-striking fault, as well as the southwest-striking fault where surface rupture was observed. Finally, aftershocks of the Mw 7.1 show a highly complex distribution, illuminating a primary northwest-striking fault zone consistent with surface rupture but also numerous crosscutting southwest-striking faults. Aftershock relocations suggest that the Mw 7.1 event ruptured adjacent to the previous northwest-striking rupture of the Mw 6.4, perhaps activating a subparallel structure southwest of the earlier rupture. Both the northwest and southeast rupture termini of the Mw 7.1 rupture exhibited multiple fault branching, with particularly high rates of aftershocks and multiple fault orientations in the dilatational quadrant northeast of the northwest rupture terminus.

Shallow structural setting of an active normal fault zone in the 30 October 2016 Mw 6.5 central Italy earthquake imaged through a multidisciplinary geophysical approach.

2020 ◽  
Author(s):  
Fabio Villani ◽  
Stefano Maraio ◽  
Pier Paolo Bruno ◽  
Lisa Serri ◽  
Vincenzo Sapia ◽  
...  
Keyword(s):  
Cluster Analysis ◽  
Fault Zone ◽  
Central Italy ◽  
Normal Fault ◽  
Alluvial Fan ◽  
Fault System ◽  
Depth Range ◽  
Inversion Algorithm ◽  
Data Set ◽  
Refraction Tomography

<p>We investigate the shallow structure of an active normal fault-zone that ruptured the surface during the 30 October 2016 Mw 6.5 Norcia earthquake (central Italy) using a multidisciplinary geophysical approach. The survey site is located in the Castelluccio basin, an intramontane Quaternary depression in the hangingwall of the SW-dipping Vettore-Bove fault system. The Norcia earthquake caused widespread surface faulting affecting also the Castelluccio basin, where the rupture trace follows the 2 km-long Valle delle Fonti fault (VF), displaying a ~3 m-high fault scarp due to cumulative surface slip of Holocene paleo-earthquakes. We explored the subsurface of the VF fault along a 2-D transect orthogonal to the coseismic rupture on recent alluvial fan deposits, combining very high-resolution seismic refraction tomography, multichannel analysis of surface waves (MASW), reflection seismology and electrical resistivity tomography (ERT).</p><p>We acquired the ERT profile using an array of 64 steel electrodes, 2 m-spaced. Apparent resistivity data were then modeled via a linearized inversion algorithm with smoothness constraints to recover the subsurface resistivity distribution. The seismic data were recorded by  a190 m-long single array centered on the surface rupture, using 96 vertical geophones 2 m-spaced and a 5 kg hammer source.</p><p>Input data for refraction tomography are ~9000 handpicked first arrival travel-times, inverted through a fully non-linear multi-scale algorithm based on a finite-difference Eikonal solver. The data for MASW were extracted from common receiver configurations with 24 geophones; the dispersion curves were inverted to generate several S-wave 1-D profiles, subsequently interpolated to generate a pseudo-2D Vs section. For reflection data, after a pre-processing flow, the picking of the maximum of semblance on CMP super-gathers was used to define a velocity model (VNMO) for CMP ensemble stack; the final stack velocity macro-model (VNMO) from the CMP processing was smoothed and used for post-stack depth conversion. We further processed Vp, Vs and resistivity models through the K-means algorithm, which performs a cluster analysis for the bivariate data set to individuate relationships between the two sets of variables. The result is an integrated model with a finite number of homogeneous clusters.</p><p>In the depth converted reflection section, the subsurface of the VF fault displays abrupt reflection truncations in the 5-60 m depth range suggesting a cumulative fault throw of ~30 m. Furthermore, another normal fault appears in the in the footwall. The reflection image points out alternating high-amplitude reflections that we interpret as a stack of alluvial sandy-gravels layers that thickens in the hangingwall of the VF fault. Resistivity, Vp and Vs models provide hints on the physical properties of the active fault zone, appearing as a moderately conductive (< 150 Ωm) elongated body with relatively high-Vp (~1500 m/s) and low-Vs (< 500 m/s). The Vp/Vs ratio > 3 and the Poisson’s coefficient > 0.4 in the fault zone suggest this is a granular nearly-saturated medium, probably related to the increase of permeability due to fracturing and shearing. The results from the K-means cluster analysis also identify a homogeneous cluster in correspondence of the saturated fault zone.</p>

scholarly journals Late Quaternary faulting in southern Matese (central Italy): implications for earthquake potential in the southern Apennines

2021 ◽  
Author(s):  
Paolo Boncio ◽  
Eugenio Auciello ◽  
Vincenzo Amato ◽  
Pietro Aucelli ◽  
Paola Petrosino ◽  
...  
Keyword(s):  
Late Quaternary ◽  
Central Italy ◽  
Slip Rate ◽  
Normal Fault ◽  
Historical Earthquakes ◽  
Fault System ◽  
Southern Apennines ◽  
Mountain Front ◽  
Point Data ◽  
Earthquake Potential

Abstract. We studied in detail the Gioia Sannitica active normal fault (GF) along the Southern Matese Fault system in the southern Apennines of Italy. The current activity of the fault system and its potential to produce strong earthquakes have been underestimated so far, and are now defined. Precise mapping of the GF fault trace on a 1 : 20,000 geological map and several point data on geometry, kinematics and throw rate are made available in electronic format. The GF, and in general the entire fault system along the southern Matese mountain front, is made of slowly-slipping faults, with a long active history revealed by the large geologic offsets, mature geomorphology, and complex fault pattern and kinematics. Present activity has resulted in Late Quaternary fault scarps resurrecting the foot of the mountain front, and Holocene surface faulting. The slip rate varies along-strike, with maximum Late Pleistocene – Holocene throw rate of ~0.5 mm/yr. Activation of the 11.5 km-long GF can produce up to M 6.1 earthquakes. If activated together with the 18 km-long Ailano-Piedimonte Matese fault (APMF), the seismogenic potential would be M 6.8. The slip history of the two faults is compatible with a contemporaneous rupture. The observed Holocene displacements on the GF and APMF are compatible with activations during some poorly known historical earthquakes, such as the 1293 (M 5.8), 1349 (M 6.8; southern prolongation of the rupture on the Aquae Iuliae fault?) and CE 346 earthquakes. A fault rupture during the 847 poorly-constrained historical earthquake is also compatible with the dated displacements.

The Storfjorden, Svalbard, Earthquake Sequence 2008–2020: Transtensional Tectonics in an Arctic Intraplate Region

2021 ◽  
Author(s):  
Lars Ottemöller ◽  
Won-Young Kim ◽  
Felix Waldhauser ◽  
Norunn Tjåland ◽  
Winfried Dallmann
Keyword(s):  
Moment Tensor ◽  
Normal Component ◽  
Strike Slip ◽  
Earthquake Sequence ◽  
Fault System ◽  
Double Difference ◽  
Offshore Area ◽  
Svalbard Archipelago ◽  
Complex Fault ◽  
East West

Abstract An earthquake sequence in the Storfjorden offshore area southwest of Spitsbergen in the Svalbard archipelago initiated with a 21 February 2008 magnitude Mw 6.1 event. This area had previously not produced any significant earthquakes, but between 2008 and 2020, a total of ∼2800 earthquakes were detected, with ∼16 of them being of moderate size (ML≥4.0). Applying double-difference relocation to improve relative locations reveals that the activity is linked to several subparallel faults striking southwest–northeast that extend across the entire crust. The southwest–northeast trend is also found as a possible fault plane from regional moment tensor inversion. The solutions range from oblique normal in the center of the cluster to pure strike slip farther away and are consistent with the compressional σ1 axis roughly in the east–west direction and plunging 57°, and the extensional σ3 axis subhorizontal trending north–south. The mainshock fault is steeply dipping to the southeast, but several other faults appear to be near vertical. The existence of oblique, right-lateral strike-slip motion on southwest–northeast-trending faults with a normal component and pure normal faulting events in between suggests transtensional tectonics that in and around Storfjorden result in activation of a complex fault system.

A deep resistivity Full Waver survey unravels the 3D structure of the Castelluccio basin in relation to the source of the 2016 Mw 6.5 Norcia earthquake (central Italy)

2020 ◽  
Author(s):  
Vincenzo Sapia ◽  
Fabio Villani ◽  
Federico Fischanger ◽  
Matteo Lupi ◽  
Paola Baccheschi ◽  
...  
Keyword(s):  
High Resolution ◽  
Spatial Scales ◽  
Sedimentary Cover ◽  
Central Italy ◽  
3D Structure ◽  
Normal Fault ◽  
Fault System ◽  
High Resistivity ◽  
Low Resistivity ◽  
Regularized Inversion

<p>The Castelluccio basin in the central Apennines (Italy) is a ~20-km<sup>2</sup>-wide intramontane Quaternary depression located in the hangingwall of the NW-trending and SW-dipping Vettore-Bove normal fault system (VBFS). This system is responsible for the 2016-2017 seismic sequence, culminated with the 30 October 2016 Mw 6.5 Norcia earthquake that caused widespread surface faulting affecting also the northern part of the Castelluccio basin. Available borehole and geophysical data are not enough to constrain the basin structure, infill architecture and their relations with the long-term activity of the VBFS. Therefore, we carried out an extensive 3D survey using the innovative Fullwaver (FW) technology, conceived to perform deep electrical resistivity tomography (DERT). We aimed at: a) mapping the geometry of the pre-Quaternary limestone basement and the basin infill thickness down to a depth of ~1 km; b) mapping the subsurface structure of known faults and their extent underneath the alluvial cover; c) mapping possible blind faults splays.</p><p>The 3D survey covered a 23 km<sup>2 </sup>area and it was designed with the aim to map the region as regularly as possible, taking into account the rugged topography and logistic issues. We used a series of independent 2-channels receivers connected each to three grounded steel electrodes, 200 m spaced, to record the electrical field generated by a five kilowatt current regulated Time Domain Induced Polarization transmitter. Data were modelled with ViewLab software via a regularized inversion with smoothness constraints to cope with the expected subsurface strong resistivity changes, and to obtain a robust 3D resistivity model.</p><p>The FW technology allowed us to constrain the geometry of the basin. The infill material is imaged as a wide, N-trending moderately resistive (< 300 Ωm) to conductive  (< 100 Ωm) region, likely made of silty sands and gravels, deepening down to 500 m b.g.l. in the southern sector, suggesting the occurrence of two main depocenters. All over the basin, we identify paired high-resistivity (> 500-1000 Ωm) and low-resistivity (< 400 Ωm) belts related to the limestone basement and to the basin infill, respectively. They display NNE and NNW dominant trends. We interpret the sharp boundaries of NNE-trending belts as related to early extensional faults promoting the basin inception. The NNW-trending belts suggest the occurrence of faults that locally cross-cut the previous ones, and that we interpret as splays of the VBFS buried under the basin sedimentary cover. The recognition of different systems of extensional faults is coherent with results of high-resolution seismic profiling carried out recently in the basin. A high-resolution 2D transect with 15 m-spaced electrodes across the 2016 surface ruptures shows details of the active VBFS splay down to 300 m depth. Moreover, in the eastern sector of the survey area, low-resistivity round-shaped anomalies in the Mesozoic substratum hints for deep Miocene compressional structures. Therefore, our DERT imaging suggests a complex tectonics in the subsurface of the Norcia earthquake fault. In particular, the currently active NNW-trending faults seem to overprint a pre-existing structural framework, promoting fault segmentation at different spatial scales</p>

Sign in / Sign up

Export Citation Format

Share Document