scholarly journals Progress in organ 3D bioprinting

2018 ◽  
Vol 4 (1) ◽  
Author(s):  
Fan Liu ◽  
Chen Liu ◽  
Qiuhong Chen ◽  
Qiang Ao ◽  
Xiaohong Tian ◽  
...  
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Scientific Research ◽  
Equity Market ◽  
3D Bioprinting ◽  
Vascular Networks ◽  
Human Organ ◽  
The Third ◽  
Biomedical Fields

Three dimensional (3D) printing is a hot topic in today’s scientific research and commercial areas. It is recognized as the third revolution in industrial as well as biomedical fields. Recently, human organ 3D bioprinting has been put forward into equity market as a concept stock and attracted a lot of attention. A large number of outstanding scientists have flung themselves into this area and made some remarkable headways. Nevertheless, organ 3D bioprinting is a sophisticated procedure which needs profound scientific/technological backgrounds/knowledges to accomplish Especially, large organ 3D bioprinting encounters enormous difficulties and challenges. One of them is to build implantable branched vascular networks in a predefined 3D construct. At present, organ 3D bioprinting still in its infancy and a great deal of work needs to be done. Here we briefly overview some of the achievements of 3D bioprinting in three large organs, such as the bone, liver and heart.

scholarly journals Discovering new 3D bioprinting applications: Analyzing the case of optical tissue phantoms

2018 ◽  
Vol 5 (1) ◽  
Author(s):  
Marisela Rodriguez-Salvador
Keyword(s):  
Optical Properties ◽  
3D Printing ◽  
Clinical Training ◽  
Three Dimensional ◽  
Biological Tissues ◽  
3D Bioprinting ◽  
Technology Intelligence ◽  
Biomedical Device ◽  
Tissue Phantoms ◽  
Scientific Papers

Optical tissue phantoms enable to mimic the optical properties of biological tissues for biomedical device calibration, new equipment validation, and clinical training for the detection, and treatment of diseases. Unfortunately, current methods for their development present some problems, such as a lack of repeatability in their optical properties. Where the use of three-dimensional (3D) printing or 3D bioprinting could address these issues. This paper aims to evaluate the use of this technology in the development of optical tissue phantoms. A competitive technology intelligence methodology was applied by analyzing Scopus, Web of Science, and patents from January 1, 2000, to July 31, 2018. The main trends regarding methods, materials, and uses, as well as predominant countries, institutions, and journals, were determined. The results revealed that, while 3D printing is already employed (in total, 108 scientific papers and 18 patent families were identified), 3D bioprinting is not yet applied for optical tissue phantoms. Nevertheless, it is expected to have significant growth. This research gives biomedical scientists a new window of opportunity for exploring the use of 3D bioprinting in a new area that may support testing of new equipment and development of techniques for the diagnosis and treatment of diseases.

scholarly journals Fabrication of 3D Printing Scaffold with Porcine Skin Decellularized Bio-Ink for Soft Tissue Engineering

Materials ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 3522
Author(s):  
Su Jeong Lee ◽  
Jun Hee Lee ◽  
Jisun Park ◽  
Wan Doo Kim ◽  
Su A Park
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
3D Printing ◽  
Three Dimensional ◽  
3D Bioprinting ◽  
Research Groups ◽  
Porcine Skin ◽  
Alginate Hydrogel ◽  
Chemical Treatments ◽  
Soft Tissue Engineering

Recently, many research groups have investigated three-dimensional (3D) bioprinting techniques for tissue engineering and regenerative medicine. The bio-ink used in 3D bioprinting is typically a combination of synthetic and natural materials. In this study, we prepared bio-ink containing porcine skin powder (PSP) to determine rheological properties, biocompatibility, and extracellular matrix (ECM) formation in cells in PSP-ink after 3D printing. PSP was extracted without cells by mechanical, enzymatic, and chemical treatments of porcine dermis tissue. Our developed PSP-containing bio-ink showed enhanced printability and biocompatibility. To identify whether the bio-ink was printable, the viscosity of bio-ink and alginate hydrogel was analyzed with different concentration of PSP. As the PSP concentration increased, viscosity also increased. To assess the biocompatibility of the PSP-containing bio-ink, cells mixed with bio-ink printed structures were measured using a live/dead assay and WST-1 assay. Nearly no dead cells were observed in the structure containing 10 mg/mL PSP-ink, indicating that the amounts of PSP-ink used were nontoxic. In conclusion, the proposed skin dermis decellularized bio-ink is a candidate for 3D bioprinting.

scholarly journals Current research in development of polycaprolactone filament for 3D bioprinting: a review

2021 ◽  
Vol 926 (1) ◽  
pp. 012080
Author(s):  
C Amni ◽  
Marwan ◽  
S Aprilia ◽  
E Indarti
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Development Stage ◽  
Biological Properties ◽  
Fabrication Process ◽  
3D Bioprinting ◽  
Three Dimensional Printing ◽  
Further Development ◽  
Dimensional Printing ◽  
The Ideal

Abstract Three-dimensional printing (3DP) provides a fast and easy fabrication process without demanding post-processing. 3D-bioprinting is a special class in 3DP. Bio-printing is the process of accurately 3DP structural design using filament. 3D bio-printing technology is still in the development stage, its application in various engineering continues to increase, such as in tissue engineering. As a forming material in 3D printing, many types of commercial filaments have been developed. Filaments can be produced from either natural or synthetic biomaterials alone, or a combination of the two as a hybrid material. The ideal filament must have precise mechanical, rheological and biological properties. Polycaprolactone (PCL) is specifically developed and optimized for bio-printing of 3D structures. PCL is a strategy in 3D printing to better control interconnectivity and porosity spatially. Structural stability and less sensitive properties environmental conditions, such as temperature, humidity, etc make PCL as an ideal material for the FDM fabrication process. In this review, we provide an in-depth discussion of current research on PCL as a filament currently used for 3D bio-printing and outline some future perspectives in their further development.

scholarly journals 3D PRINTING AND 3D BIOPRINTING TO USE FOR MEDICAL APPLICATIONS

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Milan Šljivić ◽  
Dragoljub Mirjanić ◽  
Nataša Šljivić ◽  
Cristiano Fragassa ◽  
Ana Pavlović
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
3D Models ◽  
Physical Models ◽  
Layer By Layer ◽  
3D Bioprinting ◽  
Solid Objects ◽  
Modern Methods ◽  
Digital File

The Additive manufacturing 3D printing is a process of creating a three dimensional solid objects or rapid prototyping of 3D models from a digital file, which builds layer by layer. The 3D bioprinting is a form sophisticated of 3D printing technology involving cells and tissues for the production of tissue for regenerative medicine, which is also built layer by layer into the area of human tissue or organ. This paper defines the modern methods and materials of the AM, which are used for the development of physical models and individually adjusted implants for 3D printing for medical purposes. The main classification of 3D printing and 3D bioprinting technologies are also defined by typical materials and a field of application. It is proven that 3D printing and 3D bioprinting techniques have a huge potential and a possibility to revolutionize the field of medicine.

scholarly journals Bioinspired Materials 2018: Conference Report

Biomimetics ◽  
2019 ◽  
Vol 4 (1) ◽  
pp. 4 ◽  
Author(s):  
Marloes Peeters ◽  
Patricia Linton ◽  
Araida Hidalgo-Bastida
Keyword(s):  
Tissue Engineering ◽  
Fuel Cell ◽  
3D Printing ◽  
Three Dimensional ◽  
Conference Report ◽  
Materials Chemistry ◽  
The Third ◽  
Wide Range ◽  
Bioinspired Materials ◽  
Metropolitan University

The Bioinspired Materials conference 2018 was organized for the third time by a team of researchers from Manchester Metropolitan University. This international conference aims to bring together the scientific committee in the fields of biomimetic sensors, bioinspired materials, materials chemistry, three-dimensional (3D) printing, and tissue engineering. The 2018 edition was held at the John Dalton Building of Manchester Metropolitan University, Manchester, UK, and took place on the 10th of October 2018. There were over 60 national and international attendees, with the international attendees participating in a lab tour through the synthetic facilities and Fuel Cell Innovation Centre on the 9th of October. The three conference sessions encompassed a wide range of topics, varying from biomimetic sensors, hydrogels, and biofabrics and bioengineering.

Current achievements in 3D bioprinting technology of chitosan and its hybrids

2021 ◽  
Author(s):  
Shadpour Mallakpour ◽  
Fariba Sirous ◽  
Chaudhery Mustansar Hussain
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Three Dimensional ◽  
3D Bioprinting ◽  
Printing Technology ◽  
3D Printing Technology ◽  
The World

In recent years, additive manufacturing, or in other words three-dimensional (3D) printing technology has rapidly become one of the hot topics in the world. Among the vast majority of materials,...

scholarly journals Naturally Derived Photoinitiators for Dental and Biomaterials Applications

2020 ◽  
Vol 1 (02) ◽  
pp. 72-78
Author(s):  
Mohamed Mahmoud Abdul-Monem
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Experimental Studies ◽  
Three Dimensional ◽  
Water Soluble ◽  
Polymerization Reaction ◽  
3D Bioprinting ◽  
Engineering Applications ◽  
Bonding Agents ◽  
Materials Used

AbstractBiocompatibility of materials used in dental and biomaterials applications is very important and depends on the components of these materials. Photopolymerized materials for dental and biomaterials applications have been progressively used since the 1970s. One of the crucial components in these materials is the photoinitiator (PI) that initiates the polymerization reaction. Synthetic PIs are the most commonly used types, but owing to their drawbacks such as cytotoxicity, insolubility in water, and high cost, research on naturally derived (bio-sourced) PIs is growing, to find an alternative to these synthetic types, especially in the growing field of three-dimensional (3D) printing and bioprinting of biomaterials for tissue engineering applications. Naturally derived PIs are biocompatible, highly water-soluble, and abundant. Naturally derived PIs have been used to prepare experimental dentine bonding agents, dentine primers, photo-crosslinked hydrogels for tissue engineering applications, antibacterial coatings, guided tissue regeneration membranes, and 3D printed biomaterials. An electronic search was done using MEDLINE/PubMed and Scopus databases using the keywords naturally derived, bio-sourced, PIs, dental, biomaterials, 3D printing, and 3D bioprinting, to review potential naturally derived PIs for dental and biomaterials applications. There are a variety of naturally derived PIs with various colors and absorption spectra to choose from, according to the intended application. Most of naturally derived PIs can be used with modern conventional dental light curing units, making them applicable for experimental studies for potential dental and biomaterials applications. Due to their biocompatibility and availability it is expected that in the upcoming years, research on naturally derived PIs and their dental and biomaterials applications will increase especially in the growing field of 3D bioprinting in which cell viability is essential; thus this review was done.

scholarly journals 3D Bioprinting for Vascularized Tissue-Engineered Bone Fabrication

Materials ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2278 ◽  
Author(s):  
Fei Xing ◽  
Zhou Xiang ◽  
Pol Maria Rommens ◽  
Ulrike Ritz
Keyword(s):  
Three Dimensional ◽  
Current Status ◽  
Layer By Layer ◽  
3D Bioprinting ◽  
Vascular Networks ◽  
Waste Products ◽  
Tissue Microenvironment ◽  
Spatial Architecture

Vascularization in bone tissues is essential for the distribution of nutrients and oxygen, as well as the removal of waste products. Fabrication of tissue-engineered bone constructs with functional vascular networks has great potential for biomimicking nature bone tissue in vitro and enhancing bone regeneration in vivo. Over the past decades, many approaches have been applied to fabricate biomimetic vascularized tissue-engineered bone constructs. However, traditional tissue-engineered methods based on seeding cells into scaffolds are unable to control the spatial architecture and the encapsulated cell distribution precisely, which posed a significant challenge in constructing complex vascularized bone tissues with precise biomimetic properties. In recent years, as a pioneering technology, three-dimensional (3D) bioprinting technology has been applied to fabricate multiscale, biomimetic, multi-cellular tissues with a highly complex tissue microenvironment through layer-by-layer printing. This review discussed the application of 3D bioprinting technology in the vascularized tissue-engineered bone fabrication, where the current status and unique challenges were critically reviewed. Furthermore, the mechanisms of vascular formation, the process of 3D bioprinting, and the current development of bioink properties were also discussed.

scholarly journals Cellulose Nanocrystal-Enhanced Thermal-Sensitive Hydrogels of Block Copolymers for 3D Bioprinting

2021 ◽  
Vol 7 (4) ◽  
pp. 397
Author(s):  
Yuecheng Cui ◽  
Ronghua Jin ◽  
Yifan Zhang ◽  
Meirong Yu ◽  
Yang Zhou ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Block Copolymers ◽  
3D Printing ◽  
Three Dimensional ◽  
Enhancement Effect ◽  
3D Bioprinting ◽  
Forming Mechanism ◽  
Molecular Weights ◽  
Good Biocompatibility ◽  
The Stability

 The hydrogel formed by polyethylene glycol-aliphatic polyester block copolymers is an ideal bioink and biomaterial ink for three-dimensional (3D) bioprinting because of its unique temperature sensitivity, mild gelation process, good biocompatibility, and biodegradability. However, the gel forming mechanism based only on hydrophilic-hydrophobic interaction renders the stability and mechanical strength of the formed hydrogels insufficient, and cannot meet the requirements of extrusion 3D printing. In this study, cellulose nanocrystals (CNC), which is a kind of rigid, hydrophilic, and biocompatible nanomaterial, were introduced to enhance the hydrogels so as to meet the requirements of extrusion 3D printing. First, a series of poly(ε-caprolactone/lactide)-b-poly(ethylene glycol)-b-poly(ε-caprolactone/ lactide) (PCLA-PEG-PCLA) triblock copolymers with different molecular weights were prepared. The thermodynamic and rheological properties of CNC-enhanced hydrogels were investigated. The results showed that the addition of CNC significantly improved the thermal stability and mechanical properties of the hydrogels, and within a certain range, the enhancement effect was directly proportional to the concentration of CNC. More importantly, the PCLA-PEG-PCLA hydrogels enhanced by CNC could be extruded and printed through temperature regulation. The printed objects had high resolution and fidelity with effectively maintained structure. Moreover, the hydrogels have good biocompatibility with a high cell viability. Therefore, this is a simple and effective strategy. The addition of the hydrophilic rigid nanoparticles such as CNC improves the mechanical properties of the soft hydrogels which made it able to meet the requirements of 3D bioprinting.

scholarly journals Freeform 3D printing of vascularized tissues: Challenges and strategies

2021 ◽  
Vol 12 ◽  
pp. 204173142110572
Author(s):  
Hyun Lee ◽  
Tae-Sik Jang ◽  
Ginam Han ◽  
Hae-Won Kim ◽  
Hyun-Do Jung
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Vascular Networks ◽  
3D Objects ◽  
Advantages And Disadvantages ◽  
Printing Quality ◽  
And Performance ◽  
Material Information ◽  
Printing Ink ◽  
Selection Of

In recent years, freeform three-dimensional (3D) printing has led to significant advances in the fabrication of artificial tissues with vascularized structures. This technique utilizes a supporting matrix that holds the extruded printing ink and ensures shape maintenance of the printed 3D constructs within the prescribed spatial precision. Since the printing nozzle can be translated omnidirectionally within the supporting matrix, freeform 3D printing is potentially applicable for the fabrication of complex 3D objects, incorporating curved, and irregular shaped vascular networks. To optimize freeform 3D printing quality and performance, the rheological properties of the printing ink and supporting matrix, and the material matching between them are of paramount importance. In this review, we shall compare conventional 3D printing and freeform 3D printing technologies for the fabrication of vascular constructs, and critically discuss their working principles and their advantages and disadvantages. We also provide the detailed material information of emerging printing inks and supporting matrices in recent freeform 3D printing studies. The accompanying challenges are further discussed, aiming to guide freeform 3D printing by the effective design and selection of the most appropriate materials/processes for the development of full-scale functional vascularized artificial tissues.

Sign in / Sign up

Export Citation Format

Share Document