On the Development of Tolerant Fuel --- a New Generation Fuel

2021 ◽  
pp. 124-137
Author(s):  
A.S. Sotnikov
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Reactor Core ◽  
Main Attention ◽  
Nitride Fuel ◽  
Sic Ceramic ◽  
Radical Method ◽  
The Russian Federation ◽  
Fuel Elements ◽  
New Generation

The concept of tolerant fuel is considered as applied to water-cooled power reactors. The concept is based on eliminating the steam-zirconium reaction. For this, two work areas, i.e., using the physical and the thermodynamic barriers, were considered. Physical barrier presupposes exclusion of contact between water and zirconium, and the thermodynamic barrier (the most radical method) envisages replacement of the alloy containing zirconium with other materials inert to water when exposed to high temperature in the reactor core (∼ 1200 °C). Consequences of the most devastating accidents at the nuclear power plants in the world were discussed: Three Mile Island, Chernobyl and Fukushima. The latest accident in Japan brought to the fore the concept of tolerant nuclear fuel, i.e., being resistant to accidents. Work orientation in creating the tolerant fuel is indicated. Main attention is paid to materials and technologies applied to tolerant fuel. General requirements to safety analysis of the reactor facility fuel system currently developed in the Russian Federation and abroad, as well as current safety criteria for fuel elements, under design-based accidents are presented. Procedure for calculating justification of the safety criteria fulfillment for fuel elements under design-basis accidents is briefly considered. Main characteristics of the new generation materials under development for reactor cores as applied to tolerant fuel are presented. Based on comparing the proposed materials as the tolerant fuel for the fuel element claddings, composite materials based on the heat-resistant SiC/SiC ceramic system could be recommended, and as far as fuel materials are concerned --- materials with increased density, uranium capacity and thermal conductivity values, i.e., nitride fuel and fuel made of uranium silicide

Creation of Automatic System for Monitoring, Forecasting and Control of Condition of Lead-Bismuth (Lead) Coolant and Surfaces of Circuits of Nuclear Power Plants

2009 ◽  
Author(s):  
P. N. Martynov ◽  
R. Sh. Askhadullin ◽  
A. A. Simakov ◽  
A. Yu. Chaban’ ◽  
M. E. Chernov ◽  
...  
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Reactor Core ◽  
Heat Removal ◽  
Severe Accident ◽  
Medium Size ◽  
Safety Level ◽  
Nitride Fuel ◽  
Active Safety Systems ◽  
Accident Conditions

Lead-bismuth coolant is preferable for the medium size reactors, since, in contrast to the sodium coolant, it does not interact with water and air, it is radiation resistant, insignificantly activated and it is not combustible [1]. Combination of natural properties of lead-based coolants, mono-nitride fuel, fast reactor neutronics and design approaches used for the reactor core and heat removal system brings SVBR 75/100 NPP [2] to achieve a new safety level and assures its stability without operation of active safety systems even under severe accident conditions. Analysis of possible sequences of the events even under conditions of such severe accidents as addition of total excess reactivity or all pumps trip accompanied by safety system failure leads to the conclusion on that power unit with SVBR 75/100 reactor plant (RP) has high safety level.

Flow and Temperature Fields Measurement Inside Rod Bundle by the Combined Use of PIV and LIF Technique

2018 ◽  
Author(s):  
Xing Li ◽  
Sichao Tan ◽  
Zhengpeng Mi ◽  
Peiyao Qi ◽  
Yunlong Huang
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Great Influence ◽  
Reactor Core ◽  
Transfer Characteristic ◽  
Index Of Refraction ◽  
Temperature Fields ◽  
Spacer Grid ◽  
Rod Bundle ◽  
Combined Use

Thermal hydraulic research of reactor core is important in nuclear energy applications, the flow and heat transfer characteristics of coolant in reactor fuel assembly has a great influence on the performance and safety of nuclear power plants. Particle image velocimetry (PIV) and Laser induced fluorescence (LIF) are the instantaneous, non-intrusive, whole-field fluid mechanics measuring method. In this study, the simultaneous measurement of flow field and temperature field for a rod bundle was conducted using PIV and LIF technique. A facility system, utilizing the matching index of refraction approach, has been designed and constructed for the measurement of velocity and temperature in the rod bundle. In order for further study on complex heat and mass transfer characteristic of rod bundle, the single-phase experiments on the heating conditions are performed. One of unique characteristics of the velocity and temperature distribution downstream the spacer grid was obtained. The experimental results show that the combined use of PIV and LIF technique is applied to the measurement of multi-physical field in a rod bundle is feasible, the measuring characteristics of non-intrusive ensured accuracy of whole field data. The whole field experimental data obtained in rod bundle benefits the design of spacer grid geometry.

Expectations for Inservice Testing Programs at New Nuclear Power Plants

2017 ◽  
Author(s):  
Thomas G. Scarbrough
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Reactor Core ◽  
Nuclear Regulatory Commission ◽  
Lessons Learned ◽  
Mechanical Equipment ◽  
American Society ◽  
Regulatory Commission ◽  
Safety Systems

In a series of Commission papers, the U.S. Nuclear Regulatory Commission (NRC) described its policy for inservice testing (IST) programs to be developed and implemented at nuclear power plants licensed under 10 CFR Part 52. This paper discusses the expectations for IST programs based on those Commission policy papers as applied in the NRC staff review of combined license (COL) applications for new reactors. For example, the design and qualification of pumps, valves, and dynamic restraints through implementation of American Society of Mechanical Engineers (ASME) Standard QME-1-2007, “Qualification of Active Mechanical Equipment Used in Nuclear Power Plants,” as accepted in NRC Regulatory Guide (RG) 1.100 (Revision 3), “Seismic Qualification of Electrical and Active Mechanical Equipment and Functional Qualification of Active Mechanical Equipment for Nuclear Power Plants,” will enable IST activities to assess the operational readiness of those components to perform their intended functions. ASME has updated the Operation and Maintenance of Nuclear Power Plants (OM Code) to improve the IST provisions for pumps, valves, and dynamic restraints that are incorporated by reference in the NRC regulations with applicable conditions. In addition, lessons learned from performance experience and testing of motor-operated valves (MOVs) will be implemented as part of the IST programs together with application of those lessons learned to other power-operated valves (POVs). Licensee programs for the Regulatory Treatment of Non-Safety Systems (RTNSS) will be implemented for components in active nonsafety-related systems that are the first line of defense in new reactors that rely on passive systems to provide reactor core and containment cooling in the event of a plant transient. This paper also discusses the overlapping testing provisions specified in ASME Standard QME-1-2007; plant-specific inspections, tests, analyses, and acceptance criteria; the applicable ASME OM Code as incorporated by reference in the NRC regulations; specific license conditions; and Initial Test Programs as described in the final safety analysis report and applicable RGs. Paper published with permission.

The analysis of emergency situations related to fires at nuclear power plants

2021 ◽  
Vol 30 (5) ◽  
pp. 66-75
Author(s):  
S. A. Titov ◽  
N. M. Barbin ◽  
A. M. Kobelev
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Nuclear Reactor ◽  
Reactor Core ◽  
Emergency Situations ◽  
The Usa ◽  
Large Fires ◽  
Short Circuits ◽  
Nuclear Reactor Core

Introduction. The article provides a system and statistical analysis of emergency situations associated with fires at nuclear power plants (NPPs) in various countries of the world for the period from 1955 to 2019. The countries, where fires occurred at nuclear power plants, were identified (the USA, Great Britain, Switzerland, the USSR, Germany, Spain, Japan, Russia, India and France). Facilities, exposed to fires, are identified; causes of fires are indicated. The types of reactors where accidents and incidents, accompanied by large fires, have been determined.The analysis of major emergency situations at nuclear power plants accompanied by large fires. During the period from 1955 to 2019, 27 large fires were registered at nuclear power plants in 10 countries. The largest number of major fires was registered in 1984 (three fires), all of them occurred in the USSR. Most frequently, emergency situations occurred at transformers and cable channels — 40 %, nuclear reactor core — 15 %, reactor turbine — 11 %, reactor vessel — 7 %, steam pipeline systems, cooling towers — 7 %. The main causes of fires were technical malfunctions — 33 %, fires caused by the personnel — 30 %, fires due to short circuits — 18 %, due to natural disasters (natural conditions) — 15 % and unknown reasons — 4 %. A greater number of fires were registered at RBMK — 6, VVER — 5, BWR — 3, and PWR — 3 reactors.Conclusions. Having analyzed accidents, involving large fires at nuclear power plants during the period from 1955 to 2019, we come to the conclusion that the largest number of large fires was registered in the USSR. Nonetheless, to ensure safety at all stages of the life cycle of a nuclear power plant, it is necessary to apply such measures that would prevent the occurrence of severe fires and ensure the protection of personnel and the general public from the effects of a radiation accident.

The New Generation of High-Pressure Heaters for Steam Turbine Units at Nuclear Power Plants

2021 ◽  
Vol 68 (4) ◽  
pp. 285-294
Author(s):  
V. M. Zorin ◽  
A. S. Shamarokov ◽  
S. B. Pustovalov
Keyword(s):  
High Pressure ◽  
Steam Turbine ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
New Generation

scholarly journals Assessment of water hammer effects on boiling water nuclear reactor core dynamics

2007 ◽  
Vol 22 (1) ◽  
pp. 18-33 ◽  
Author(s):  
Anis Bousbia-Salah
Keyword(s):  
Pressure Wave ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Reactor ◽  
Reactor Core ◽  
Water Hammer ◽  
Pressure Wave Amplitude ◽  
Sensitivity Studies ◽  
Rapid Transients ◽  
Complex Phenomena

Complex phenomena, as water hammer transients, occurring in nuclear power plants are still not very well investigated by the current best estimate computational tools. Within this frame work, a rapid positive reactivity addition into the core generated by a water hammer transient is considered. The numerical simulation of such phenomena was carried out using the coupled RELAP5/PARCS code. An over all data comparison shows good agreement between the calculated and measured core pressure wave trends. However, the predicted power response during the excursion phase did not correctly match the experimental tendency. Because of this, sensitivity studies have been carried out in order to identify the most influential parameters that govern the dynamics of the power excursion. After investigating the pressure wave amplitude and the void feed back responses, it was found that the disagreement between the calculated and measured data occurs mainly due to the RELAP5 low void condensation rate which seems to be questionable during rapid transients. .

scholarly journals Analysis of numerical studies on the thermal-hydraulic and neutronic thermal-hydraulic stability of supercritical water reactors

2021 ◽  
Vol 7 (4) ◽  
pp. 311-318
Author(s):  
Artavazd M. Sujyan ◽  
Viktor I. Deev ◽  
Vladimir S. Kharitonov
Keyword(s):  
Supercritical Water ◽  
Nuclear Power ◽  
Power Plants ◽  
Negative Impact ◽  
Reactor Core ◽  
Resistance Coefficient ◽  
Coolant Flow ◽  
Water Reactor ◽  
Hydraulic Stability ◽  
Supercritical Water Reactor

The paper presents a review of modern studies on the potential types of coolant flow instabilities in the supercritical water reactor core. These instabilities have a negative impact on the operational safety of nuclear power plants. Despite the impressive number of computational works devoted to this topic, there still remain unresolved problems. The main disadvantages of the models are associated with the use of one simulated channel instead of a system of two or more parallel channels, the lack consideration for neutronic feedbacks, and the problem of choosing the design ratios for the heat transfer coefficient and hydraulic resistance coefficient under conditions of supercritical water flow. For this reason, it was decided to conduct an analysis that will make it possible to highlight the indicated problems and, on their basis, to formulate general requirements for a model of a nuclear reactor with a light-water supercritical pressure coolant. Consideration is also given to the features of the coolant flow stability in the supercritical water reactor core. In conclusion, the authors note the importance of further computational work using complex models of neutronic thermal-hydraulic stability built on the basis of modern achievements in the field of neutron physics and thermal physics.

FPGA Technology and Platforms for NPP I&C systems

2020 ◽  
pp. 419-457
Author(s):  
Andriy Kovalenko ◽  
Ievgen Babeshko ◽  
Viktor Tokarev ◽  
Kostiantyn Leontiiev
Keyword(s):  
Field Programmable Gate Array ◽  
Nuclear Power ◽  
Power Plants ◽  
Critical Systems ◽  
Field Programmable ◽  
Assessment Techniques ◽  
Safety Critical Systems ◽  
New Generation ◽  
And Control ◽  
Element Base

This chapter describes an element base of new generation for NPP I&C, namely field programmable gate array (FPGA), and peculiarities of the FPGA application for designing safety critical systems. FPGA chips are modern complex electronic components that have been applied in nuclear power plants (NPPs) instrumentation and control systems (I&CSs) during the last 15-17 years. The advantages and some risks caused by application of the FPGA technology are analyzed. Safety assessment techniques of FPGA-based I&CSs and experience of their creation are described. The FPGA-based platform RadICS and its application for development of NPP I&CS is described.

Steady-State Thermal-Hydraulic Analysis of a Particle-Bedded Boiling Water Reactor

2009 ◽  
Author(s):  
Xiaoyu Cai ◽  
Suizheng Qiu ◽  
Guanghui Su ◽  
Changyou Zhao
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Superheated Steam ◽  
Nuclear Reactor ◽  
Hydraulic Analysis ◽  
Light Water ◽  
Safety Systems ◽  
Fuel Elements ◽  
Thermal Hydraulic Analysis

The current Light Water Reactors both BWR and PWR have extensive nuclear reactor safety systems, which provide safe and economical operation of Nuclear Power Plants. During about forty years of operation history the safety systems of Nuclear Power Plants have been upgraded in an evolutionary manner. The cost of safety systems, including large containments, is really high due to a capital cost and a long construction period. These conditions together with a low efficiency of steam cycle for LWR create problems to build new power plants in the USA and in the Europe. An advanced Boiling Water Reactor concept with micro-fuel elements (MFE) and superheated steam promises a radical enhancement of safety and improvement of economy of Nuclear Power Plants. In this paper, a new type of nuclear reactor is presented that consists of a steel-walled tube filled with millions of TRISO-coated fuel particles (Micro-Fuel Elements, MFE) directly cooled by a light-water coolant-moderator. Water is used as coolant that flows from bottom to top through the tube, thereby fluidizing the particle bed, and the moderator water flows in the reverse direction out of the tube. The fuel consists of spheres of about 2.5 mm diameter of UO2 with several coatings of different carbonaceous materials. The external coating of steam cycle the particles is silicon carbide (SiC), manufactured with chemical vapor deposit (CVD) technology. Steady-State Thermal-Hydraulic Analysis aims at providing heat transport capability which can match with the heat generated by the core, so as to provide a set of thermal hydraulic parameters of the primary loop. So the temperature distribution and the pressure losses along the direction of flow are calculated for equilibrium core in this paper. The calculation not only includes the liquid region, but the two phase region and the superheated steam region. The temperature distribution includes both the temperature parameters of micro-fuel elements and the coolant. The results show that the maximum fuel temperature is much lower than the limitation and the flow distribution can meet the cooling requirement in the reactor core.

Power Maximization of Fully Passive Lead-Bismuth Eutectic Cooled Small Modular Reactor

2014 ◽  
Author(s):  
Jaehyun Cho ◽  
Yong-Hoon Shin ◽  
Il Soon Hwang
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Natural Circulation ◽  
Reactor Core ◽  
Design Stage ◽  
Pressurized Water ◽  
Small Modular Reactor ◽  
Power Maximization ◽  
Lead Bismuth Eutectic ◽  
Water Reactors

Although the current Pressurized Water Reactors (PWRs) have significantly contributed to the global energy supply, PWRs have not been considered as a trustworthy energy solution owing to its several problems; spent nuclear fuels (SNFs), nuclear safety, and nuclear economy. In order to overcome these problems, lead-bismuth eutectic (LBE) fully passive cooling Small Modular Reactor (SMR) system is suggested. It is possible to not only provide the solution of the problem of SNFs through the transmutation feature of LBE coolant, but also increase the safety and economy through the concepts of the natural circulation cooling SMRs. It is necessary to maximize the advantages (safety and economy) of this type of Nuclear Power Plants for several applications in future. Accordingly, objective of the study is to maximize the reactor core power while the limitations of shipping size, materials endurance, long-burning criticality as well as safety under Beyond Design Basis Events must be satisfied. Design limitations of natural circulating LBE-cooling SMRs are researched and power maximization method is developed based on obtained design limitations. It is expected that the results are contributed to reactor design stage with providing several insights to designers as well as the methods for design optimization of other type of SMRs.

Sign in / Sign up

Export Citation Format

Share Document