scholarly journals KINETIC STUDIES OF Cu ADSORPTION FROM SASIRANGAN LIQUID WASTE USING RICE HUSK ACTIVATED CARBON

Konversi ◽  
2021 ◽  
Vol 10 (2) ◽  
Author(s):  
Isna Syauqiah ◽  
Desi Nurandini ◽  
Nopi Stiyati Prihatini ◽  
Jamiyaturrasidah Jamiyaturrasidah
Keyword(s):  
Activated Carbon ◽  
Rice Husk ◽  
Adsorption Process ◽  
Chemical Elements ◽  
Chemical Activation ◽  
Liquid Waste ◽  
Carbon Adsorbent ◽  
Aquatic Organisms ◽  
Kinetic Studies ◽  
Physical Activation

The industry of sasirangan – traditional fabric of Banjar Tribe – has been one of prime commodities of South Kalimantan. The coloring process  in sasirangan production used a lot of chemical elements containing heavy metals  and its waste potentially pollute the environment. One of the heavy metal waste contained is copper (Cu) which is toxic to aquatic organisms and humans. The treatment for sasirangan liquid waste can be done by adsorption process using activated carbon as adsorbent. This study aims to determine the appropriate kinetic model for adsorption of Cu metal from sasirangan liquid waste using activated carbon adsorbent made from rice husks.The process was conducted by batch system with chemical and physical activation. Chemical activation was done by soaking the activated carbon of rice husk with HCl solution for 24 hours. While physical activation was carried out by burning in a furnace at 500̊C for 2 hours. The adsorption treatment was given on sasirangan waste samples with variations on contact time (30, 60 and 120 minutes). The results of kinetics study showed that the adsorption process of Cu from sasirangan liquid waste onto rice husk activated carbon adsorbent followed first-order reaction kinetics with a correlation coefficient value (R2) of 0.96 and adsorption rate constant (k1) of 0.0044 min-1.

scholarly journals EFFECT OF STIRRING SPEED ON CADMIUM (Cd) METAL ADSORPTION FROM SASIRANGAN LIQUID WASTE BY RICE HUSK ACTIVATED CARBON

Konversi ◽  
2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Isna Syauqiah ◽  
Desi Nurandini ◽  
Nopi Stiyati Prihatini ◽  
Rizki Azkia Simanjuntak
Keyword(s):  
Activated Carbon ◽  
Rice Husk ◽  
Textile Industry ◽  
Adsorption Process ◽  
Chemical Activation ◽  
Liquid Waste ◽  
Activation Process ◽  
Rice Husks ◽  
Optimum Result ◽  
Heavy Metal Concentrations

South Kalimantan is one of the textile industry producers, which is Sasirangan industry.The traditional fabric-making process involves chemicals as the production process. Sasirangan liquid waste contains pollutants that do not meet the requirements for disposal into the environment, including cadmium (Cd). Adsorption process is an effective method to reduce heavy metal concentrations in liquid waste. This study aims to determine the potential of rice husk activated carbon in adsorbing Cd metal from  sasirangan liquid waste and to analyze the effect of stirring speed on the adsorption process. The rice husks that had been carbonized were then activated chemically and physically. Chemical activation process was carried out by adding chemical compound HCl which was immersed for 24 hours. Furthermore, it was physically activated in the furnace for 45 minutes at 4500C. In case to get optimum result, the effect of stirring speed on the adsorption process was studied. The stirring speed determines the rate of adsorbent and adsorbate contact time. The higher the stirring speed, the higher the decrease in Cd content because adsorbate absorption process by  adsorbent is getting better. The greatest decrease in Cd concentration was by carbon that had been activated  with a stirring speed of 90 rpm where the remaining Cd content in the sample was 0.018 mg / L.

Reduksi Ion Cu(II) Menggunakan Karbon Aktif dari Sekam Padi Teraktivasi Fisika dan Kimia

2020 ◽  
Vol 5 (3) ◽  
Author(s):  
Eka Purnawan ◽  
Abrar Muslim ◽  
Nasrullah Razali ◽  
Muhammad Zaki ◽  
Hesti Meilina ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Rice Husk ◽  
Contact Time ◽  
Chemical Activation ◽  
Physical Activation ◽  
Batch Experiments ◽  
Carbonation Process ◽  
Maximum Value ◽  
Initial Ph ◽  
Pseudo Second Order

This research proposed a method to produce activated carbon from rice husk by carbonation process, physical activation and chemical activation using NaOH. The performance of activated carbon was tested by batch experiments in which the adsorption system contained 1 g of rice husk activated carbon in 100 mL of artificial wastewater with initial concentration of Cu(II) ion being 148.26 mg/L, initial pH 6, at 27 oC and 1 atm to determine the efficiency of reducing Cu(II) ion over the contact time and presence of stirring on chemical activation. The results showed that the efficiency of reducing Cu(II) ion by rice husk activated carbon increased exponentially with increasing contact time with a maximum value of 74.33% at 90 minutes of contact time. The results also showed that stirring on chemical activation increased the efficiency of Cu(II) ion reduction by 14.94%. Adsorption kinetics studies showed that Cu(II) ion reduction followed the pseudo-second order adsorption equation with the adsorption capacity of 10.18 mg/g and  adsorption rate constant of 0.0013 g/mg.min for rice husk activated carbon without stirring in the chemical activation. Stirring in the chemical activation.increased the capacity and rate of adsorption constant to 12.07 mg/g and 0.0052 g/mg.min, respectively.

Analisis Variasi Temperatur Aktivasi Terhadap Daya Serap Arang Aktif Tandan Aren (Arenga Pinnata Merr) Dengan Agen Aktivasi Potassium Silicate(K2SiO3)

2020 ◽  
Vol 5 (3) ◽  
pp. 221
Author(s):  
Muhammad Azam ◽  
Muhammad Anas ◽  
Erniwati Erniwati
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Adsorption Capacity ◽  
Temperature Variation ◽  
Chemical Activation ◽  
Weight Ratio ◽  
Potassium Silicate ◽  
Physical Activation ◽  
Activation Temperature ◽  
Pyrolysis Reactor

This study aims to determine the effect of variation of activation temperature of activated carbon from sugar palm bunches of chemically activatied with the activation agent of potassium silicate (K2SiO3) on the adsorption capacity of iodine and methylene blue. Activated carbon from bunches of sugar palmacquired in four steps: preparationsteps, carbonizationstepsusing the pyrolysis reactor with temperature of 300 oC - 400 oC for 8 hours and chemical activation using of potassium silicate (K2SiO3) activator in weight ratio of 2: 1 and physical activation using the electric furnace for 30 minutes with temperature variation of600 oC, 650 oC, 700 oC, 750 oC and 800 oC. The iodine and methyleneblue adsorption testedby Titrimetric method and Spectrophotometry methodrespectively. The results of the adsorption of iodine and methylene blue activated carbon from sugar palm bunches increased from 240.55 mg/g and 63.14 mg/g at a temperature of 600 oC to achieve the highest adsorption capacity of 325.80 mg/g and 73.59 mg/g at temperature of 700 oC and decreased by 257.54 mg/g and 52.03 mg/g at a temperature of 800 oCrespectively.However, it does not meet to Indonesia standard (Standard Nasional Indonesia/SNI), which is 750 mg/g and 120 mg/g respectively.

Adsorptive Removal of Pb(II) Ion from Aqueous Solution Using Rice Husk-Based Activated Carbon

2014 ◽  
Vol 875-877 ◽  
pp. 196-201 ◽  
Author(s):  
Mohd Faisal Taha ◽  
Ahmad S. Rosman ◽  
Maizatul S. Shaharun
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Rice Husk ◽  
Low Cost ◽  
Chemical Activation ◽  
Textural Properties ◽  
Activation Process ◽  
Adsorption Studies ◽  
Three Samples ◽  
Equilibrium Data

The potential of rice husk-based activated carbon as an alternative low-cost adsorbent for the removal of Pb (II) ion from aqueous solution was investigated. Rice husk-based activated carbon was preparedviachemical activation process using NaOH followed by the carbonization process at 500°C. Morphological analysis was conducted using field-emission scanning electron microscope /energy dispersive X-ray (FESEM/EDX) on three samples, i.e. raw rice husk, rice husk treated with NaOH and rice husk-based activated carbon. These three samples were also analyzed for their C, H, N, O and Si contents using CHN elemental analyzer and FESEM/EDX. The textural properties of rice husk-based activated carbon, i.e. surface area (253 m2/g) and pore volume (0.17 cm2/g), were determined by N2adsorption. The adsorption studies using rice husk-based activated carbon as an adsorbent to remove Pb (II) ion from aqueous solution were carried out at a fixed initial concentration of Pb (II) ion (150 ppm) with varying adsorbent dose as a function of contact time at room temperature. The concentration of Pb (II) ion was determined by atomic absorption spectrophotometer (AAS). The removal of Pb (II) ion from aqueous solution increased from 35 % to 82 % when the amount of rice husk-based activated carbon was increased from 0.05 g to 0.30 g. The equilibrium data obtained from adsorption studies was found to fit both Langmuir and Freundlich adsorption isotherms.

scholarly journals Performance of Sweet Potato’s Leaf-Derived Activated Carbon for Hydrogen Sulphide Removal from Biogas

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Geni Juma ◽  
Revocatus Machunda ◽  
Tatiana Pogrebnaya
Keyword(s):  
Activated Carbon ◽  
Adsorption Process ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Carbonization Temperature ◽  
Optimal Test ◽  
Potato Leaf ◽  
Bet Analysis ◽  
S 100 ◽  
Activation Ratio

In this study, sweet potato leaf activated carbon (SpLAC) was prepared by the chemical activation method using KOH and applied as an adsorbent for H2S removal from biogas. The study focused on the understanding of the effect of carbonization temperature (Tc), varying KOH : C activation ratio, flow rate (FR) of biogas, and mass of SpLAC on sample adsorption capacity. The BET analysis was performed for both fresh and spent activated carbons as well as for carbonized samples, which were not activated; also, the activated carbon was characterized by XRF and CHNS techniques. The results showed that removal efficiency (RE) of the SpLAC increased with increase carbonization temperature from 600 to 800°C and the mass of sorbent from 0.4 g to 1.0 g. The optimal test conditions were determined: 1.0 g of sorbent with a KOH : C ratio of 1 : 1, Tc=800°C, and FR=0.02 m3/h which resulted in a sorption capacity of about 3.7 g S/100 g of the SpLAC. Our findings corroborated that H2S removal was contributed not only by the adsorption process with the pore available but also by the presence of iron in the sample that reacted with H2S. Therefore, upon successful H2S sorption, SpLAC is suggested as a viable adsorbent for H2S removal from biogas.

scholarly journals Phenol removal from aqueous solution using silica and activated carbon derived from rice husk

2019 ◽  
Vol 14 (4) ◽  
pp. 897-907 ◽  
Author(s):  
Hosseinali Asgharnia ◽  
Hamidreza Nasehinia ◽  
Roohollah Rostami ◽  
Marziah Rahmani ◽  
Seyed Mahmoud Mehdinia
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Water Treatment ◽  
Organic Pollutants ◽  
Rice Husk ◽  
Contact Time ◽  
Adsorption Process ◽  
Phenol Removal ◽  
Initial Concentration ◽  
Maximum Removal

Abstract Phenol and its derivatives are organic pollutants with dangerous effects, such as poisoning, carcinogenicity, mutagenicity, and teratogenicity in humans and other organisms. In this study, the removal of phenol from aqueous solution by adsorption on silica and activated carbon of rice husk was investigated. In this regard, the effects of initial concentration of phenol, pH, dosage of the adsorbents, and contact time on the adsorption of phenol were investigated. The results showed that the maximum removal of phenol by rice husk silica (RHS) and rice husk activated carbon (RHAC) in the initial concentration of 1 mgL−1 phenol, 2 gL−1 adsorbent mass, 120 min contact time, and pH 5 (RHS) or pH 6 (RHAC) were obtained up to 91% and 97.88%, respectively. A significant correlation was also detected between increasing contact times and phenol removal for both adsorbents (p < 0.01). The adsorption process for both of the adsorbents was also more compatible with the Langmuir isotherm. The results of this study showed that RHS and RHAC can be considered as natural and inexpensive adsorbents for water treatment.

scholarly journals Modeling and Optimization for Production of Rice Husk Activated Carbon and Adsorption of Phenol

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Y. S. Mohammad ◽  
E. M. Shaibu-Imodagbe ◽  
S. B. Igboro ◽  
A. Giwa ◽  
C. A. Okuofu
Keyword(s):  
Activated Carbon ◽  
Adsorption Capacity ◽  
Removal Efficiency ◽  
Rice Husk ◽  
Adsorption Process ◽  
Operating Conditions ◽  
Optimum Operating ◽  
Process Variables ◽  
Adsorbent Dosage ◽  
Pretreatment Temperature

Modeling of adsorption process establishes mathematical relationship between the interacting process variables and process optimization is important in determining the values of factors for which the response is at maximum. In this paper, response surface methodology was employed for the modeling and optimization of adsorption of phenol onto rice husk activated carbon. Among the action variables considered are activated carbon pretreatment temperature, adsorbent dosage, and initial concentration of phenol, while the response variables are removal efficiency and adsorption capacity. Regression analysis was used to analyze the models developed. The outcome of this research showed that 99.79% and 99.81% of the variations in removal efficiency and adsorption capacity, respectively, are attributed to the three process variables considered, that is, pretreatment temperature, adsorbent dosage, and initial phenol concentration. Therefore, the models can be used to predict the interaction of the process variables. Optimization tests showed that the optimum operating conditions for the adsorption process occurred at initial solute concentration of 40.61 mg/L, pretreatment temperature of 441.46°C, adsorbent dosage 4 g, adsorption capacity of 0.9595 mg/g, and removal efficiency of 97.16%. These optimum operating conditions were experimentally validated.

scholarly journals Preparation and Characterization of Activated Carbon from Waste Rubber Tires: A Comparison between Physical and Chemical Activation

2015 ◽  
Vol 1107 ◽  
pp. 347-352 ◽  
Author(s):  
Collin Glen Joseph ◽  
Duduku Krishniah ◽  
Yun Hin Taufiq-Yap ◽  
Masnah Massuanna ◽  
Jessica William
Keyword(s):  
Activated Carbon ◽  
Automobile Industry ◽  
Chemical Activation ◽  
Waste Product ◽  
Physical Activation ◽  
Activation Process ◽  
Waste Rubber ◽  
Percentage Yield ◽  
Static Conditions ◽  
Physical And Chemical

Abstract. Waste tires, which are an abundant waste product of the automobile industry, were used to prepare activated carbon by means of physical and chemical activation. A two-stage process was used, with a semi-carbonization stage as the first stage, followed by an activation stage as the second stage.All experiments were conducted in a laboratory-scale muffle furnace under static conditions in a self-generated atmosphere. During this process, the effects of the parametric variables of semi-carbonization time (for the physical activation process), activation time and temperature and impregnation ratios (for the chemical activation process) on the percentage yield were studied and compared. Varying these parametric variables yielded interesting results, which in turn affected the adsorption process of 2,4-DCP, which was the simulated pollutant in aqueous form. The optimized percentage yields of activated carbon that were obtained were 41.55% and 44.88% ofthe physical and chemical activation treatment processes respectively.Keywords: Physical activation, chemical activation, waste rubber tires, 2,4-dichlorophenol, activated carbon.

AKTIVASI KIMIA-FISIK LIMBAH SERUTAN ROTAN MENJADI KARBON AKTIF

2014 ◽  
Vol 14 (1) ◽  
pp. 82-98
Author(s):  
Andy Mizwar
Keyword(s):  
Activated Carbon ◽  
Water Content ◽  
Iodine Number ◽  
Surface Area ◽  
Chemical Activation ◽  
Raw Material ◽  
Physical Activation ◽  
Fixed Carbon ◽  
Impregnation Time ◽  
Physical And Chemical

Limbah rotan dari industri kerajinan dan mebel berpotensi untuk dijadikan sebagai bahan baku pembuatan karbon aktif karena memiliki kandungan holoselulosa dan kadar karbon yang tinggi. Penelitian ini bertujuan untuk menganalisis efektifitas dari aktivasi kimia menggunakan larutan natrium klorida (NaCl) yang dilanjutkan dengan aktivasi fisik dalam pembuatan karbon aktif berbahan dasar  limbah serutan rotan. Pembuatan karbon aktif diawali dengan proses karbonisasi pada suhu 250°C selama 1 jam. Selanjutnya aktivasi kimia menggunakan larutan NaCl dengan variasi konsentrasi 10%, 15% dan 20% serta waktu perendaman selama 10, 15 dan 20 jam. Aktivasi fisik dilakukan dengan pembakaran pada suhu 700°C selama 30 menit. Analisis karakteristik fisik-kimia karbon aktif mengacu pada SNI 06-3730-95, meliputi kadar air, fixed carbon, dan iodine number, sedangkan perhitungan luas permukaan spesifik karbon aktif dilakukan dengan Metode Sears. Hasil penelitian ini menunjukkan bahwa kondisi optimum aktivasi kimia terjadi pada konsentrasi NaCl 10% dan lama perendaman 10 jam dengan hasil analisis kadar air 2.90%, fixed carbon 72.70%, iodine number 994.59 mg/g dan luas permukaan 1587.67 m²/g. Peningkatan fixed carbon, iodine number dan luas permukaan karbon aktif berbanding terbalik dengan peningkatan konsentrasi NaCl dan lama waktu perendaman, sedangkan peningkatan kadar air pada karbon aktif berlaku sebaliknya. Rattan waste from handicraft and furniture industry could potentially be used as raw material of activated carbon due to high content of holoselulosa and carbon. This paper investigates the effectiveness of chemical activation using sodium chloride (NaCl) followed by physical activation in the making of activated carbon-based on rattan shavings waste. Preparation of the activated carbon began with the carbonization process at 250°C for 1 hour. Furthermore chemical activation using a variation of NaCl concentrations 10%, 15% and 20% as well as the time of immersion 10, 15 and 20 hours. Physical activation was done by burning at 700°C for 30 minutes. Analysis of the physical and chemical characteristics of the activated carbon was referred to the SNI 06-3730-95, including of moisture content, fixed carbon and iodine number, while the calculation of the specific surface area was done by the Sears’s method. The results of this study showed that the optimum conditions of chemical activation occurred in impregnation by NaCl 10% for 10 hours. The water content, fixed carbon, iodine number and surface area of activated carbon was 2.90%, 72.70%, 994.59 mg/g and 1587.67 m²/g  respectively. The increase values of fixed carbon, iodine number, and surface area was inversely proportional to the increase of NaCl concentration and the length of impregnation time, while the increase of water content applied vice versa.

Sign in / Sign up

Export Citation Format

Share Document