scholarly journals Polymethylmethacrylate (PMMA) Encapsulated Graphene Oxide Nanocomposite: Pre-modification, Synthesis, and Latex Stability

2020 ◽  
Author(s):  
Hui Wang ◽  
Letian Wang ◽  
Shanyu Meng ◽  
Hanxue Lin ◽  
Melanie Correll ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Critical Role ◽  
Miniemulsion Polymerization ◽  
Sem Analysis ◽  
High Molecular Weight Polymer ◽  
Molecular Weight Polymer ◽  
Transmission Electron ◽  
Composite Production ◽  
Uniform Particle Size

The compatibility of graphene or graphene oxide with its dispersion medium (polymer) plays a critical role in the formation nanocomposite materials with significant property improvements. Environmentally friendly miniemulsion polymerization, which allows a formation of nanoencapsulation in an aqueous phase and high molecular weight polymer/composite production is one promising method. In this study, we screened a series of amphiphilic modifiers and found that the quaternary ammonium (ar-vinyl benzyl) trimethyl ammonium chloride (VBTAC) pending carbon double bonds could effectively modify the graphene oxide (GO) to be compatible with the organophilic monomer. After that, free radical miniemulsion polymerization could successfully synthesize stable latex of exfoliated poly (methyl methacrylate) (PMMA)/ GO nanocomposite. The final latex had an extended storage life and a relatively uniform particle size distribution. X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) analysis of this latex and its films indicated successful encapsulation of exfoliated nano-dimensional graphene oxide inside a polymer matrix.

scholarly journals Nanocomposite of Graphene Oxide Encapsulated in Polymethylmethacrylate (PMMA): Pre-Modification, Synthesis, and Latex Stability

2020 ◽  
Vol 4 (3) ◽  
pp. 118
Author(s):  
Hui Wang ◽  
Letian Wang ◽  
Shanyu Meng ◽  
Hanxue Lin ◽  
Melanie Correll ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Critical Role ◽  
Miniemulsion Polymerization ◽  
Sem Analysis ◽  
High Molecular Weight Polymer ◽  
Molecular Weight Polymer ◽  
Transmission Electron ◽  
Composite Production ◽  
Uniform Particle Size

The compatibility of graphene oxide with its dispersion medium (polymer) plays a critical role in the formation of nanocomposite materials with significant property improvements. Environmentally friendly miniemulsion polymerization, which allows a formation of nanoencapsulation in an aqueous phase and high molecular weight polymer/composite production is one promising method. In this study, we screened a series of amphiphilic modifiers and found that the quaternary ammonium (ar-vinyl benzyl) trimethyl ammonium chloride (VBTAC) pending carbon double bonds could effectively modify the graphene oxide (GO) to be compatible with the organophilic monomer. After that, free radical miniemulsion polymerization successfully synthesized stable latex of exfoliated poly (methyl methacrylate) (PMMA)/ GO nanocomposite. The final latex had an extended storage life and a relatively uniform particle size distribution. X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) analysis of this latex and its films indicated successful encapsulation of exfoliated nano-dimensional graphene oxide inside a polymer matrix.

Three-Dimensional Holey-Graphene Architectures for Highly Sensitive Enzymatic Electrochemical Determination of Hydrogen Peroxide

2019 ◽  
Vol 19 (11) ◽  
pp. 7404-7409 ◽  
Author(s):  
Aihua Jing ◽  
Gaofeng Liang ◽  
Hao Shi ◽  
Yixin Yuan ◽  
Quanxing Zhan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Hydrogen Peroxide ◽  
Graphene Oxide ◽  
Three Dimensional ◽  
Electrochemical Determination ◽  
High Specific Surface Area ◽  
3D Graphene ◽  
Practical Applications ◽  
Transmission Electron ◽  
Mild Defect

Three-dimensional (3D) graphene with high specific surface area, excellent conductivity and designed porosity is essential for many practical applications. Herein, holey graphene oxide with nano pores was facilely prepared via a convenient mild defect-etching reaction and then fabricated to 3D nanostructures via a reduction method. Based on the 3D architectures, a novel enzymatic hydrogen peroxide sensor was successfully fabricated. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) were used to characterize the 3D holey graphene oxide architectures (3DHGO). Cyclic voltammetry (CV) was used to evaluate the electrochemical performance of 3DHGO at glassy carbon electrode (GCE). Excellent electrocatalytic activity to the reduction of H2O2 was observed, and a linear range of 5.0×10-8~5.0×10-5 M with a detection limit of 3.8×10-9 M was obtained. These results indicated that 3DHGO have potential as electrochemical biosensors.

scholarly journals Synthesis of Polyaniline coated Graphene Oxide @ SrTiO3 Nanocube Nanocomposites for Enhanced Removal of Carcinogenic Dyes from Aqueous Solution

2016 ◽  
Author(s):  
Syed Shahabuddin ◽  
Norazilawati Muhamad Sarih ◽  
Muhammad Afzal Kamboh ◽  
Hamid Rashidi Nodeh ◽  
Sharifah Mohamad
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solution ◽  
Methylene Blue ◽  
Graphene Oxide ◽  
Methyl Orange ◽  
Oxidative Polymerization ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Polymerization Method

The present investigation highlights the synthesis of polyaniline (PANI) coated graphene oxide doped with SrTiO3 nanocube nanocomposites through facile in-situ oxidative polymerization method for the efficient removal of carcinogenic dyes, namely, the cationic dye methylene blue (MB) and the anionic dye methyl orange (MO). The synthesised nanocomposites were characterised by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The adsorption efficiencies of graphene oxide (GO), PANI homopolymer and SrTiO3 nanocubes-doped nanocomposites were assessed by monitoring the adsorption of methylene blue and methyl orange dyes from aqueous solution. The adsorption efficiency of nanocomposites doped with SrTiO3 nanocubes were found to be of higher magnitude as compared with undoped nanocomposite. Moreover, the nanocomposite with 2 wt% SrTiO3 with respect to graphene oxide demonstrated excellent adsorption behaviour with 99% and 91% removal of MB and MO respectively, in a very short duration of time.

Application of the polycaprolactone polymer for the encapsulation of geraniol: evaluation of the efficiency and stability

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Thaís Karoline Carniel ◽  
Pâmela Fagundes ◽  
Ana Carolina Vivan ◽  
Luciano Luiz Silva ◽  
Micheli Zanetti ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Essential Oil ◽  
Natural Compound ◽  
Thermal Protection ◽  
Miniemulsion Polymerization ◽  
Food Preservation ◽  
Transmission Electron ◽  
Mean Size ◽  
Antibacterial And Antifungal

Abstract Geraniol has been an attractive compound for food preservation due to its antibacterial and antifungal actions. The main objective of this study was to produce and characterize polycaprolactone (PCL) capsules for the protection of the encapsulated geraniol essential oil. The encapsulation was carried out using a miniemulsion polymerization technique with an efficiency of (95.44 ± 0.60%). The capsules were obtained with a mean size of 148 nm and with a polydispersity index of 0.12. Transmission electron microscopy results confirmed the formation of spherical capsules of PCL coating the geraniol. From the analysis of thermogravimetry, it was possible to prove the thermal protection of geraniol by PCL coating since the release of the encapsulated geraniol occurred with temperatures 100 °C higher than the volatilization temperature of the natural compound. An important observation was that the microcapsules of PCL-geraniol immersed in aqueous suspensions at 4 °C showed good stability over 60 days.

scholarly journals Reduced Graphene Oxide–Epoxy Grafted Poly(Styrene-Co-Acrylate) Composites for Corrosion Protection of Mild Steel

Coatings ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 666
Author(s):  
Xinchuan Fan ◽  
Yue Hu ◽  
Yijun Zhang ◽  
Jiachen Lu ◽  
Xiaofeng Chen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
X Ray Diffraction ◽  
Corrosion Properties ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Scanning Electron

Reduced graphene oxide–epoxy grafted poly(styrene-co-acrylate) composites (GESA) were prepared by anchoring different amount of epoxy modified poly(styrene-co-acrylate) (EPSA) onto reduced graphene oxide (rGO) sheets through π–π electrostatic attraction. The GESA composites were characterized by Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The anti-corrosion properties of rGO/EPSA composites were evaluated by electro-chemical impedance spectroscopy (EIS) in hydroxyl-polyacrylate coating, and the results revealed that the corrosion rate was decreased from 3.509 × 10−1 to 1.394 × 10−6 mm/a.

scholarly journals Gnidia glauca- and Plumbago zeylanica-Mediated Synthesis of Novel Copper Nanoparticles as Promising Antidiabetic Agents

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Dhiraj A. Jamdade ◽  
Dishantsingh Rajpali ◽  
Komal A. Joshi ◽  
Rohini Kitture ◽  
Anuja S. Kulkarni ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Copper Nanoparticles ◽  
Critical Role ◽  
Cost Effective ◽  
Significant Inhibition ◽  
Antidiabetic Activity ◽  
X Ray Diffraction ◽  
One Pot ◽  
Plumbago Zeylanica ◽  
Transmission Electron

Rapid, eco-friendly, and cost-effective one-pot synthesis of copper nanoparticles is reported here using medicinal plants like Gnidia glauca and Plumbago zeylanica. Aqueous extracts of flower, leaf, and stem of G. glauca and leaves of P. zeylanica were prepared which could effectively reduce Cu2+ ions to CuNPs within 5 h at 100°C which were further characterized using UV-visible spectroscopy, field emission scanning electron microscopy, high-resolution transmission electron microscopy, energy dispersive spectroscopy, dynamic light scattering, X-ray diffraction, and Fourier-transform infrared spectroscopy. Further, the CuNPs were checked for antidiabetic activity using porcine pancreatic α-amylase and α-glucosidase inhibition followed by evaluation of mechanism using circular dichroism spectroscopy. CuNPs were found to be predominantly spherical in nature with a diameter ranging from 1 to 5 nm. The phenolics and flavonoids in the extracts might play a critical role in the synthesis and stabilization process. Significant change in the peak at ∼1095 cm−1 corresponding to C-O-C bond in ether was observed. CuNPs could inhibit porcine pancreatic α-amylase up to 30% to 50%, while they exhibited a more significant inhibition of α-glucosidase from 70% to 88%. The mechanism of enzyme inhibition was attributed due to the conformational change owing to drastic alteration of secondary structure by CuNPs. This is the first study of its kind that provides a strong scientific rationale that phytogenic CuNPs synthesized using G. glauca and P. zeylanica can be considered to develop candidate antidiabetic nanomedicine.

scholarly journals Structural Characterization of Graphene Oxide: Surface Functional Groups and Fractionated Oxidative Debris

Nanomaterials ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 1180 ◽  
Author(s):  
Elvin Aliyev ◽  
Volkan Filiz ◽  
Muntazim M. Khan ◽  
Young Joo Lee ◽  
Clarissa Abetz ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Functional Groups ◽  
Structural Model ◽  
Oxide Surface ◽  
Resonance Spectroscopy ◽  
X Ray Diffraction ◽  
Surface Functional Groups ◽  
X Ray ◽  
Transmission Electron

The purpose of this work is the structural analysis of graphene oxide (GO) and by means of a new structural model to answer the questions arising from the Lerf–Klinowski and the Lee structural models. Surface functional groups of GO layers and the oxidative debris (OD) stacked on them were investigated after OD was extracted. Analysis was performed successfully using Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-Vis), X-ray photoemission spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDX), Raman spectroscopy, solid-state nuclear magnetic resonance spectroscopy (SSNMR), standardized Boehm potentiometric titration analysis, elemental analysis, X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The analysis showed that graphene oxide layers, as well as oxidative debris contain different functional groups such as phenolic –OH, ketone, lactone, carboxyl, quinone and epoxy. Based on these results, a new structural model for GO layers is proposed, which covers all spectroscopic data and explains the presence of the other oxygen functionalities besides carboxyl, phenolic –OH and epoxy groups.

In Situ Fabrication of Nanoscale Graphene Oxide/Polyaniline Composite and its Electrochemical Properties

2010 ◽  
Vol 148-149 ◽  
pp. 1547-1550 ◽  
Author(s):  
Hua Lan Wang ◽  
Qing Li Hao ◽  
Xi Feng Xia ◽  
Zhi Jia Wang ◽  
Jiao Tian ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
In Situ Polymerization ◽  
Ammonium Persulfate ◽  
Polymerization Process ◽  
Electrochemical Test ◽  
X Ray ◽  
Transmission Electron

A graphene oxide/polyaniline composite was synthesized by an in situ polymerization process. This product was simply prepared in an ethylene glycol medium, using ammonium persulfate as oxidant in ice bath. The composite was characterized by field emission scanning electron microscopy, transmission electron microscopy, X-Ray photoelectron spectroscopy, Raman spectroscopy and electrochemical test. The composite material showed a good electrochemical performance.

scholarly journals Facile Fabrication of CeO2/Electrochemically Reduced Graphene Oxide Nanocomposites for Vanillin Detection in Commercial Food Products

Nanomaterials ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 1356 ◽  
Author(s):  
Xue Nie ◽  
Rui Zhang ◽  
Zheng Tang ◽  
Haiyan Wang ◽  
Peihong Deng ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Linear Sweep Voltammetry ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Electrochemically Reduced Graphene Oxide ◽  
Wide Range ◽  
Facile Fabrication

In this paper, CeO2 nanoparticles were synthesized by the solvothermal method and dispersed uniformly in graphene oxide (GO) aqueous solution by ultrasonication. The homogeneous CeO2-GO dispersion was coated on the surface of a glassy carbon electrode (GCE), and the CeO2/electrochemically reduced graphene oxide modified electrode (CeO2/ERGO/GCE) was obtained by potentiostatic reduction. The results of X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) showed that CeO2 nanocrystals were uniformly coated by gossamer like ERGO nanosheets. The electrochemical behavior of vanillin on the CeO2/ERGO/GCE was studied by cyclic voltammetry (CV). It was found that the CeO2/ERGO/GCE has high electrocatalytic activity and good electrochemical performance for vanillin oxidation. Using the second derivative linear sweep voltammetry (SDLSV), the CeO2/ERGO/GCE provides a wide range of 0.04–20 µM and 20 µM–100 µM for vanillin detection, and the detection limit is estimated to be 0.01 µM after 120 s accumulation. This method has been successfully applied to the vanillin detection in some commercial foods.

Characterization of Nanostructured Silica as Carrier for Insecticides Deltamethrin, Pyriproxyfen, and Chlorpyrifos and Testing the Insecticidal Efficacy Against Trogoderma granarium (Coleoptera: Dermestidae) Larvae

2019 ◽  
Vol 113 (1) ◽  
pp. 511-517
Author(s):  
Masumeh Ziaee ◽  
Asgar Babamir-Satehi
Keyword(s):  
Electron Microscopy ◽  
Silica Nanoparticles ◽  
Sol Gel ◽  
Sem Analysis ◽  
Efficient Treatment ◽  
Trogoderma Granarium ◽  
Transmission Electron ◽  
Insecticidal Efficacy ◽  
Sol Gel Process ◽  
Nanostructured Silica

Abstract Nanostructured silica can be used as a carrier of pesticides to enhance stability and controlled release of agrochemicals with an effective concentration on target pests. Silica nanoparticles (SNPs) were synthesized by sol–gel process and employed as a carrier of three different insecticides including deltamethrin, pyriproxyfen, and chlorpyrifos. The SNPs were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) analysis and the insecticides-loaded in SNPs were characterized by transmission electron microscopy (TEM). The toxicity of insecticides alone and loaded in SNPs was evaluated against small and large larvae of Trogoderma granarium Everts on concrete surfaces. The immediate mortality was counted after 1, 3, and 7 d of exposure, and then surviving individuals were transferred to untreated surfaces for seven more days, with delayed mortality was recorded. Small larvae were more susceptible than large ones on all insecticide treatments. In addition, insecticides loaded in silica nanoparticles were more effective when compared with application of the insecticides alone. For immediate mortality, deltamethrin loaded in SNPs was the most efficient treatment causing 70.5% mortality on small and 55.5% mortality on large larvae after 7 d of exposure to the highest concentration. Pyriproxyfen loaded in SNPs caused low immediate mortality, but the mortality increased in delayed count indicated that the insecticide could control the larvae even after they have been removed from treated surfaces. It can be concluded that loading insecticides in SNPs could significantly increase their insecticidal efficiency, but this increase was compound-dependent.

Sign in / Sign up

Export Citation Format

Share Document