VARIASI CAMPURAN ALKALI AKTIVATOR PADA KUAT TEKAN BETON GEOPOLIMER DENGAN MENGGUNAKAN ABU CANGKANG TELUR BEBEK PADA PROSES PENGOVENAN

2019 ◽  
Vol 14 (1) ◽  
Author(s):  
Kevin Erin Hasner ◽  
Sittati Musalamah ◽  
Prihantono Prihantono
Keyword(s):  
Compressive Strength ◽  
Room Temperature ◽  
Test Machine ◽  
Concrete Compressive Strength ◽  
Oven Test ◽  
Egg Shells ◽  
Duck Egg ◽  
Average Compressive Strength ◽  
Cylindrical Test

The objective of this research is to know the increase in the value of geopolymer concrete compressive strength using duck eggshell ash with a mixture of sodium silicate and sodium hydroxidein variations of 65%: 35%, 70%: 30%, and 75%: 25% at 7 days and 28 days with oven test specimensand control concrete which are only allowed to stand at room temperature. Ass Duck egg shells used are wastes which are burned with temperatures reaching 800 ° Cfor ± 4 hours using a ceramic burning oven. This study uses cylindrical test object with a diameter of10 cm and a height of 20 cm with the quality of the plan is fc '20 MPa. Testing of geopolymerconcrete compressive strength using a Crushing Test Machine tool. The geopolymer concretecompressive strength produced by heating concrete specimens at activator variations of 65%: 35%,70%: 30%, and 75%: 25% at 7 days ie 6,157 MPa, 12,314 MPa, and 3,736 MPa, and for 28 days ie2.547 MPa, 2.760 MPa, and 1.698 MPa. While the concrete specimens which were not heated thevalue of concrete compressive strength on activator variations were 65%: 35%, 70%: 30%, and 75%:25% at 7 days, ie 2.972 MPa, 3.991 MPa, and 1.486 MPa, and for 28 days, ie 1.401 MPa, 2.123MPa, and 1,273 MPa. It can be seen that the value of the maximum average compressive strength isin the variation of activator 70%: 30% with test specimens vented at a temperature of 79 ° C first.

PENINGKATAN KUAT TEKAN BETON GEOPOLIMER DENGAN MENGGUNAKAN VARIASI ABU CANGKANG TELUR BEBEK MELALUI PROSES PENGOVENAN

2020 ◽  
Vol 15 (1) ◽  
pp. 23-29
Author(s):  
Kinanti Anastasia ◽  
Prihantono Prihantono ◽  
Anisah Anisah
Keyword(s):  
Compressive Strength ◽  
Test Object ◽  
Test Machine ◽  
Geopolymer Concrete ◽  
Duck Egg ◽  
Egg Shell ◽  
And Control ◽  
Average Compressive Strength ◽  
Cylindrical Test

The objective of this research is to know the increase of compressive strength value of geopolymer concrete using duck egg duck ash with mixture of sodium silicate and sodium hydroxide at variation 0%, 80%, 90% and 100% at 7 days with heating specimen and control concrete room temperature. Ash duck egg shell used is burnt waste with temperatures reaching 800 ° C for ± 6 hours using ceramic burning oven. This study uses cylindrical test object with diameter 10 cm and height 20 cm with the quality of plan is fc '20 MPa. Testing of compressive strength of geopolymer concrete using Crushing Test Machine tool. In this purpose, the compressive strength of the geopolymer concrete produced by the concrete test object on variations 0%; 80%; 90%; and 100% ie 0 MPa; 6,32 MPa; 8,57 MPa; and 14,01MPa, while the concrete test object No concrete compressive strength was applied on variations of 0%; 80%; 90%; and 100% ie 7,64 MPa; 4,84MPa; 5,77MPa; and 6.19MPa. It can be seen that the maximum average compressive strength value is present in the 100% variation with the tested object being tested at 83°C first.

scholarly journals Perbandingan Kuat Tekan Dan Kuat Lentur Beton Mutu Tinggi Dengan Menggunakan Berbagai Merk Semen Di Kota Pekanbaru

2018 ◽  
Vol 18 (1) ◽  
pp. 49-58
Author(s):  
Roza Mildawati
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Concrete Compressive Strength ◽  
Coarse Aggregates ◽  
Fine Aggregates ◽  
Construction Services ◽  
Cement Factories ◽  
Selection Of ◽  
Cylindrical Test

[ID] Concrete is a very popular building material used in the world of construction services, consisting of a mixture of Portland Cement (PC) or other hydraulic cement, fine aggregates, coarse aggregates and water, with or without using additional materials. The quality of materials such as cement also greatly affects the strength of the concrete after hardening, so the selection of cement quality must be in accordance with the concrete planning regulations in order to obtain optimal results. In Indonesia there are many new cement factories that produce to meet the needs of the community, one of which is the Conch brand cement. So in connection with the above, Conch cement can be examined to compare the value of compressive strength and flexural strength with old cement, namely cement Padang, Tiga Roda, Holcim and Bosowa which are generally always used in concrete planning at this time.The purpose of this study was to determine the comparison of compressive strength and flexural strength of the concrete and the multiplier between cement Padang, Three Wheels and Conch at 28 days of age. In this study using the method SNI 03-2834-2000. With cylindrical test specimens (150 mm x 300 mm) and size beams (150 mm x 150 mm x 600 mm) three specimens were made for each cement.The maximum concrete compressive strength is found in Padang cement with a compressive strength of 45.86 Mpa, for the minimum compressive strength found in Tiga Roda cement with compressive strength value of 40.19 Mpa and for the compressive strength of cement Conch there is a second with compressive strength value 42.84 Mpa. From the explanation above, the results of 28 days of concrete compressive strength with each cement brand still not reached the planned concrete compressive strength of 38 MPa. The maximum concrete flexural strength is found in Padang cement with a flexural strength value of 5.03 Mpa, for a minimum flexural strength value found in Tiga Roda cement with a flexural strength value of 3.96 Mpa and for the value of Conch cement compressive strength there is a second with flexural strength 4.43 Mpa. From the explanation above, the results of 28 days of concrete flexural strength with each cement brand that has not reached the 4.4 Mpa plan, namely the three-wheeled cement brand. [EN] Concrete is a very popular building material used in the world of construction services, consisting of a mixture of Portland Cement (PC) or other hydraulic cement, fine aggregates, coarse aggregates and water, with or without using additional materials. The quality of materials such as cement also greatly affects the strength of the concrete after hardening, so the selection of cement quality must be in accordance with the concrete planning regulations in order to obtain optimal results. In Indonesia there are many new cement factories that produce to meet the needs of the community, one of which is the Conch brand cement. So in connection with the above, Conch cement can be examined to compare the value of compressive strength and flexural strength with old cement, namely cement Padang, Tiga Roda, Holcim and Bosowa which are generally always used in concrete planning at this time.The purpose of this study was to determine the comparison of compressive strength and flexural strength of the concrete and the multiplier between cement Padang, Three Wheels and Conch at 28 days of age. In this study using the method SNI 03-2834-2000. With cylindrical test specimens (150 mm x 300 mm) and size beams (150 mm x 150 mm x 600 mm) three specimens were made for each cement.The maximum concrete compressive strength is found in Padang cement with a compressive strength of 45.86 Mpa, for the minimum compressive strength found in Tiga Roda cement with compressive strength value of 40.19 Mpa and for the compressive strength of cement Conch there is a second with compressive strength value 42.84 Mpa. From the explanation above, the results of 28 days of concrete compressive strength with each cement brand still not reached the planned concrete compressive strength of 38 MPa. The maximum concrete flexural strength is found in Padang cement with a flexural strength value of 5.03 Mpa, for a minimum flexural strength value found in Tiga Roda cement with a flexural strength value of 3.96 Mpa and for the value of Conch cement compressive strength there is a second with flexural strength 4.43 Mpa. From the explanation above, the results of 28 days of concrete flexural strength with each cement brand that has not reached the 4.4 Mpa plan, namely the three-wheeled cement brand.

scholarly journals PEMANFAATAN LIMBAH GYPSUM BOARD DAN BATU BATA MERAH UNTUK SUBSTITUSI SEMEN PADA PEMBUATAN BETON

2019 ◽  
Vol 2 (2) ◽  
pp. 333
Author(s):  
Didik Hadi Prayogo ◽  
Ahmad Ridwan ◽  
Sigit Winarto
Keyword(s):  
Compressive Strength ◽  
Building Blocks ◽  
New Materials ◽  
Concrete Compressive Strength ◽  
Gypsum Board ◽  
Normal Concrete ◽  
Compressive Strength Test ◽  
Average Compressive Strength ◽  
Main Material

Concrete is one of the most vital building blocks, from columns, bricks, paving to roads made of concrete, so the use of concrete tends to be high. Concrete is often used as the main buffer in a building, so good quality is needed, but this is not accompanied by a declining quality of the material, so it requires innovation in the addition of new materials that can at least reduce the needs of the main material for making concrete, one of which is the utilization of Gypsum Board waste and red brick waste. The results of testing the concrete compressive strength test with the addition of Gypsum Board waste and red brick waste to cement obtained pretty good results. Concrete, which has the highest average compressive strength than normal concrete, has concrete with a mixture of red brick and gypsum waste of 10% each with a compressive strength of 250.56 kg / cm², and which has the lowest compressive strength have concrete with a mixture of red bricks and gypsum waste 15% each with a compressive strength of 195.56 kg / cm².Beton merupakan salah satu unsur penyusun bangunan paling vital mulai dari kolom,bata, paving hingga jalan terbuat dari beton sehingga penggunaan beton cenderung tinggi. Beton sering digunakan sebagai bahan penyangga utama pada suatu bangunan maka diperlukan kualitas yang baik, namun hal tersebut tidak di sertai dengan kualitas bahan yang kian menurun,makadiperlukan inovasi penambahan bahan baru yang setidaknya dapat mengurangi kebutuhan bahan utama pembuat beton, salah satunya pemanfaatan limbah Gypsum Board dan limbah batu bata merah Hasil dari pengetesan uji kuat tekan beton dengan penambahan limbah Gypsum Board dan limbah batu bata merah terhadap semen didapatkanhasil yang cukup bagus Beton yang memiliki nilai kuat tekan rata-rata paling tinggi selain beton normal di miliki beton dengan campuran batu bata merah dan limbah gypsum masing-masing 10% dengan nilai kuat tekan sebesar 250,56 Kg/cm²,dan yang memiliki nilai kuat tekan paling rendah di miliki beton dengan campuran batu bata merah dan limbah gypsum masing-masing 15% dengan nilai kuat tekan 195,56 Kg/cm².

Comparison of Several Extreme Learning Machine Algorithm for Modeling Concrete Compressive Strength

2014 ◽  
Vol 548-549 ◽  
pp. 1735-1738 ◽  
Author(s):  
Jian Tang ◽  
Dong Yan ◽  
Li Jie Zhao
Keyword(s):  
Compressive Strength ◽  
Extreme Learning Machine ◽  
Prediction Accuracy ◽  
Partial Least Square ◽  
Least Square ◽  
Extreme Learning Machines ◽  
Concrete Compressive Strength ◽  
Learning Machines ◽  
Learning Machine

Modeling concrete compressive strength is useful to ensure quality of civil engineering. This paper aims to compare several Extreme learning machines (ELMs) based modeling approaches for predicting the concrete compressive strength. Normal ELM algorithm, Partial least square-based extreme learning machines (PLS-ELMs) algorithm and Kernel ELM (KELM) algorithm are used and evaluated. Results indicate that the normal ELMs algorithm has the highest modeling speed, and the KELM has the best prediction accuracy. Every method is validated for modeling concrete compressive strength. The appropriate modeling approach should be selected according different purposes.

scholarly journals Saringan Cangkang Telur Bebek Efektif Memperbaiki Kualitas pH Dan Kadar Besi Air Sumur Bor

2021 ◽  
Vol 18 (1) ◽  
pp. 13
Author(s):  
Rahmatullah Jati Pradopo ◽  
Sulaiman Hamzani ◽  
Syarifudin A.
Keyword(s):  
Preliminary Test ◽  
Control Group ◽  
Water Wells ◽  
Trial Analysis ◽  
Water Well ◽  
Egg Shells ◽  
Duck Egg ◽  
Filter Thickness ◽  
Test Result

Water well drill that is in the Pondok Pesantren Hidayatullah Banjarbaru seen physically yellowish and smelly. Preliminary test result obtained pH 4.9 and Fe 2.5 mg/L. Based on the quality of clean water standards have not fulfilled the requirements of 1.0 mg/L and pH 6.5-8.5. It needs to be done research test of duck egg filter making in improving the quality of pH and Fe water well drill. The goal of this research is to know the effectiveness of duck egg filter in improving the quality of pH and Fe water wells drill. Types of research are experiments with pretest-posttest with control group. The population in the research is the whole water well drill in the Pondok Pesantren Hidayatullah Banjarbaru. A research sample is a water well drill that is partially taken for trial. Analysis of the influence thickness of the sieve using Anova asymp Test < œ (0.000 < 0.05) means there is a difference between the filter thickness of duck egg, 0 cm, 20 cm, 40 cm, 60 cm. Then done test Posh Hoc Tests can be concluded that there is a meaningful difference between the thickness of the filter of ducks egg shells 0 cm, 20 cm, 40 cm, 60 Based on the research results of the sieve 40 cm with a weight of 291 gram is an effective sieve in lowering the water level of the well drill.

scholarly journals PENGARUH CAMPURAN ABU SEKAM PADI DAN ABU ARANG TEMPURUNG SEBAGAI PENGGANTI SEBAGIAN AGREGAT HALUS TERHADAP KUAT TEKAN BETON

2021 ◽  
Vol 1 (1) ◽  
pp. 1
Author(s):  
Agung Prayogi
Keyword(s):  
Compressive Strength ◽  
Rice Husk ◽  
Coarse Aggregate ◽  
Rice Husk Ash ◽  
Fine Aggregate ◽  
Concrete Compressive Strength ◽  
Fine Aggregates ◽  
Compressive Strength Of Concrete ◽  
Average Compressive Strength ◽  
By Products

Abstract Concrete is the most widely used material throughout the world and innovations continue to be carried out to produce efficient development. Shell charcoal ash and rice husk ash are industrial by-products which have the potential to replace sand for concrete mix, especially in Indragiri Hilir. The research with the title "Effect of Mixture of Rice Husk Ash and Shell Ash Ashes as Substitute for Some Fine Aggregates Against Concrete Compressive Strength" aims to prove the effect of a mixture of shell charcoal ash and husk ash to replace some of the sand to produce maximum compressive strength. Concrete is a mixture of Portland cement, fine aggregate, coarse aggregate, and water. This research uses 5 variations of the mixture to the weight of sand, BSA 0 without a substitute mixture, BSA 1 with a mixture of 5% husk ash and 10% shell charcoal, BSA 2 with a mixture of 5% husk ash and 15% charcoal ash, BSA 3 with a mixture of 5% husk ash and 18% charcoal, BSA 4 with a mixture of 10% husk and 10% charcoal, and BSA 5 with a mixture of 13% husk ash and 10% charcoal ash. SNI method is used for the Job Mix Formula (JMF) mixture in this research. The results of the average compressive strength of concrete at 28 days for JMF of 21.05 MPa, BSA 1 of 23.68 MPa, BSA 2 of 22.23 MPa, BSA 3 of 14.39 MPa, BSA 4 of 13.34 MPa , and BSA 5 of 20.14 MPa. The conclusion drawn from the results of the BSA 1 research with a mixture of 5% husk ash and 15% charcoal ash produced the highest average compressive strength of 23.68 MPa. Abstrak Beton merupakan material paling banyak digunakan diseluruh dunia dan terus dilakukan inovasi untuk menghasilkan pembangunan yang efisien. Abu arang tempurung dan abu sekam padi merupakan hasil sampingan industri yang berpotensi sebagai pengganti pasir untuk campuran beton, khususnya di Indragiri Hilir. Penelitian dengan judul “Pengaruh Campuran Abu Sekam Padi dan Abu Arang Tempurung Sebagai Pengganti Sebagian Agregat Halus Terhadap Kuat Tekan Beton” ini bertujuan membuktikan adanya pengaruh campuran abu arang tempurung dan abu sekam untuk mengganti sebagian pasir hingga menghasilkan kuat tekan maksimum. Beton adalah campuran antara semen portland, agregat halus, agregat kasar, dan air. Penelitian ini menggunakan 5 variasi campuran terhadap berat pasir, BSA 0 tanpa campuran pengganti, BSA 1 dengan campuran 5 % abu sekam dan 10% arang tempurung, BSA 2 dengan campuran 5% abu sekam dan 15% abu arang, BSA 3 dengan campuran 5% abu sekam dan 18% arang, BSA 4 dengan campuran 10% sekam dan 10% arang, dan BSA 5 dengan campuran 13% abu sekam dan 10% abu arang. Metode SNI digunakan untuk campuran Job Mix Formula (JMF)  pada penelitian ini. Hasil rata-rata kuat tekan beton pada umur 28 hari untuk JMF sebesar 21,05 MPa, BSA 1 sebesar 23,68 MPa, BSA 2 sebesar 22,23 MPa, BSA 3 sebesar 14,39 MPa, BSA 4 sebesar 13,34 MPa, dan BSA 5 Sebesar 20,14 MPa. Ditarik kesimpulan dari hasil penelitian BSA 1 dengan campuran 5% abu sekam dan 15% abu arang menghasilkan rata-rata kuat tekan tertinggi yaitu sebesar 23,68 MPa.  

scholarly journals Eksperimen Beton Mutu Tinggi Berbahan Fly Ash Sebagai Pengganti Sebagian Semen

2018 ◽  
Vol 15 (1) ◽  
pp. 11-16
Author(s):  
Fauna Adibroto ◽  
Etri Suhelmidawati ◽  
Azri Azhar Musaddiq Zade
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Concrete Compressive Strength ◽  
Rigid Pavement ◽  
Cement Replacement ◽  
Road Design ◽  
Cylinder Test ◽  
Implementation Techniques ◽  
Partial Cement Replacement

Various research in concrete sector has been done as an effort to increase quality of concrete, materials and method, materials technology and implementation techniques obtained from the results of the experiments and experiments are intended to answer the increasing demands on the use of concrete and overcome the constraints that often occur in the implementation of work in the field. One way to increase the strength of concrete is to use a cement replacement that is fly ash.The purpose of this research is to know the influence of partial cement replacement effect with fly ash to the concrete compressive strength, in order to be applicated for rigid pavement in road design. The variations of composition in the addition of fly ash is 0%, 10%, 12.5%, 15%, 20% and 25% of the weight of cement. Concrete compressive strength is 40 MPa and tested at 7 days and 28 days. This research tested concrete with cylinder test object (diameter 150 mm and height 300 mm) with 30 sample and consist of 6 variation. From this research, optimum compressive strength at 10% variation is 30,770 MPa. The lowest compressive strength is in the 25% variation with 20,046 MPa.The highest compressive strength obtained from the research is 30.770 Mpa.

scholarly journals PENGARUH GENANGAN AIR TERHADAP PENGECORAN BETON IN-SITU

2018 ◽  
Vol 14 (2) ◽  
pp. 158-168
Author(s):  
Aminullah Aminullah
Keyword(s):  
Compressive Strength ◽  
Pulse Velocity ◽  
Test Machine ◽  
Concrete Compressive Strength ◽  
Normal Concrete ◽  
Waterlogged Condition ◽  
Frame Work ◽  
Building Project ◽  
Mixed Concrete

ABSTRACTHigh rainfall intensity maybe occur during the dry season. This can certainly disturb the erection of a building project, especially in a case of construction works requiring dry condition, such in concrete item. Various attempts have been made to reduce the height of the puddle, when mixing the fresh concrete in a frame work of sub-structure elements, e.g. the foot-plate foundation. The puddles in the foundry area potentially affect the composition of the mortar especially in water-cement ratio (wcr). This caused a decrease of compressive strength (f’c) of the concrete then causing the quality decreaseof the concrete. This research used two types of mixed concreteconditions: dry and waterlogged condition. The water cement ratioshould be changed when mixing concrete had been performed in waterlogged condition. One determinedcontrol sample was based on a normal concrete mixture with characteristic strength (f'c) = 25 MPa. The standard of concrete mixing used is SNI-2834-2000 on the mixingprocedure of a normal concrete mixed design. The concrete sampleswere tested using a concrete compressor universal test machine (UTM) than comparedto hammer and Ultra Pulse Velocity (UPV) test.Based on the results of the study, the quality of mixed concrete in waterlogged conditions was much lower than the compressive strength design. The percentage reduction in compressed strength of mixed concrete under water submerged conditions ranged from 30.82% to 32.63% to normal concrete compressive strength. The higher level of puddlecaused the lower compressive strength of the concrete.There was a match between the measurements of concrete compressive strength using UTM comparedto hammer and UPV tests.The percentage differences in measurement of hammer test to UTM test results were 10.73% and 9.26% to 21.79% by the UPV test. Keywords: concrete, foot plate, mix design, puddle, wcr Intesitas hujan yang cukup tinggi juga dapat terjadi pada musim kemarau. Hal ini tentu dapat mengganggu pelaksanaan suatu pekerjaan bangunan, khususnya pekerjaan konstruksi yang telah disyaratkan untuk dikerjakan dalam kondisi kering.  Berbagai macam upaya telah dilakukan untuk mengurangi tinggi genangan air pada saat pengecoran elemen sub-structure, seperti halnya pondasi telapak (foot-plate). Genangan air yang terdapat pada daerah pengecoran berpotensi mempengaruhi komposisi adukan khususnya pada faktor air semen (fas). Hal tersebut dapat mengakibatkan kuat tekan beton (f’c) berkurang sehingga mengakibatkan mutu beton menjadi berkurang. Kajian ini menggunakan dua jenis kondisi pengecoran, yaitu: kondisi kering dan kondisi pada genangan air. Faktor air semen berubah seiring dengan kegiatan pengecoran beton dalam kondisi basah (tergenang air).  Satu buah sampel kontrol telah ditentukan berdasarkan adukan beton normal dengan kekuatan karakteristik (f’c) = 25 MPa. Standar pencampuran beton yang digunakan adalah SNI-2834-2000 tentang tata cara pembuatan rencana campuran beton normal. Sampel beton akan diuji dengan alat kuat tekan beton yang dilengkapi dengan dial ekstensometer sehingga dapat diperoleh kurva tegangan-regangan beton berdasarkan variasi fas yang diberikan. Berdasarkan hasil penelitianmaka kualitas beton yang dicor dalam kondisi tergenang air jauh lebih rendah dari nilai kuat tekan beton desain,  Persentase penurunan kuat tekan beton yang dicor dalam kondisi terendam air berkisar antara 30,82% sampai dengan 32,63% terhadap kuat tekan beton normal,  Semakin tinggi genangan air maka semakin rendah kuat tekan beton, Terdapat kesesuaian antara pengukuran kuat tekan beton menggunakan UTM  dengan uji hammer dan UPV, Persentase perbedaan pengukuran uji hammer terhadap hasil uji UTM adalah 10,73% dan 9,26% sampai dengan Kualitas beton yang dicor dalam kondisi tergenang air jauh lebih rendah dari nilai kuat tekan beton desain,  Persentase penurunan kuat tekan beton yang dicor dalam kondisi terendam air berkisar antara 30,82% sampai dengan 32,63% terhadap kuat tekan beton normal,  Semakin tinggi genangan air maka semakin rendah kuat tekan beton, Terdapat kesesuaian antara pengukuran kuat tekan beton menggunakan UTM  dengan uji hammer dan UPV, Persentase perbedaan pengukuran uji hammer terhadap hasil uji UTM adalah 10,73% dan 9,26% sampai dengan21,79% untuk uji UPV.Kata kunci: beton, foot plate, genangan, campuran

PENGARUH CAMPURAN SERAT KULIT PINANG DAN SERBUK GERGAJI TERHADAP KUAT TEKAN BATAKO

2021 ◽  
Vol 7 (2) ◽  
pp. 69-76
Author(s):  
Winda Gustika Hami ◽  
Akbar Alfa ◽  
Rezky Kinanda
Keyword(s):  
Compressive Strength ◽  
Multiple Correlation Coefficient ◽  
Areca Nut ◽  
Betel Nut ◽  
Compressive Strength Test ◽  
Multiple Determination ◽  
Positive Effect ◽  
Average Compressive Strength ◽  
Test Objects

Abstract There are various ways to improve the quality and quality of bricks, seeing the amount of betel husk fiber waste and sawdust in the Indragiri Hilir area, the author is interested in examining the characteristics of bricks with added ingredients of areca nut fiber and sawdust in terms of compressive strength. The bricks made were solid bricks with a size of 39 cm x 9 cm x 10 cm as many as 4 samples, and each sample consisted of 5 test objects. The test used a variety of different additives, namely BSS 0 without the addition of added ingredients, BSS 1 with 5% betel nut fiber added and 2% sawdust, BSS 2 with 3% betel nut fiber added and 1% sawdust, BSS 3 with added ingredients of 1% areca nut fiber and 4% sawdust. The compressive strength test was carried out at the age of 7 days and then converted to the age of 28 days. The average compressive strength of bricks at the age of 7 days with sample codes BSS 1 20.50 kg/cm2, BSS 1 16.85, BSS 2 8.11 kg/cm2, and BSS 3 2.14 kg/cm2 . There is a positive effect of the addition of betel nut and sawdust fiber on the compressive strength of the brick are y = 17.34 + 0.57 X1 + (-3.84 X2), coefficient of multiple determination (r2) is 0.86%, and the multiple correlation coefficient (r) is 0.93.   Abstrak Berbagai macam cara untuk meningkatkan kualitas dan mutu batako, melihat banyaknya limbah serat kulit pinang dan serbuk gergaji didaerah Indragiri Hilir, penulis tertarik untuk meneliti karakteristik batako dengan bahan tambah serat kulit pinang dan serbuk gergaji ditinjau dari kuat tekannya. Batako yang dibuat adalah batako pejal dengan ukuran 39 cm x 9 cm x 10 cm sebanyak 4 sampel, dan tiap sampel terdiri dari 5 buah benda uji. Pengujian menggunakan variasi campuran bahan tambah yang berbeda, yaitu BSS 0 tanpa penambahan bahan tambah, BSS 1 dengan bahan tambah serat kulit pinang 5% dan serbuk gergaji 2%, BSS 2 dengan bahan tambah serat kulit pinang 3% dan serbuk gergaji 1%, BSS 3 dengan bahan tambah serat kulit pinang 1% dan serbuk gergaji 4%. Pengujian kuat tekan dilakukan pada umur 7 hari kemudian dikonversikan ke umur 28 hari. Kuat tekan rata-rata batako pada umur 7 hari dengan kode sampel BSS 1 20,50 kg/cm2, BSS 1 16,85, BSS 2 8,11 kg/cm2, dan BSS 3 2,14 kg/cm2. Ada pengaruh positif penambahan serat kulit pinang dan serbuk gergaji terhadap kuat tekan batako yaitu y = 17,34 + 0,57 X1 + (-3,84 X2), koefisien determinasi ganda (r2) sebesar 0,86%, dan koefisien korelasi ganda (r) sebesar 0,93.

scholarly journals TINJAUAN KUAT TEKAN BETON DENGAN MENGGUNAKAN SERAT BENDRAT SEBAGAI BAHAN TAMBAH

2019 ◽  
Vol 1 (2) ◽  
pp. 124-132
Author(s):  
Hermansyah ◽  
Moh Ihsan Sibgotuloh
Keyword(s):  
Compressive Strength ◽  
Fresh Concrete ◽  
Mix Design ◽  
Test Results ◽  
Concrete Compressive Strength ◽  
Normal Concrete ◽  
Fiber Concrete ◽  
Concrete Mix ◽  
Materials Used ◽  
Average Compressive Strength

The more widespread use of concrete construction and the increasing scale of construction, the higher the demand for materials used in concrete mixes. One of the innovations of concrete is fiber concrete. Hope the addition of fiber in concrete mixes such as wire fiber to increase the compressive strength value of normal concrete that is often used, so the purpose of this study is to determine the effect of adding wire fiber to the ease of working (workability) of the concrete mixture and to determine the effect of adding wire fiber to concrete compressive strength. In this study, the fiber used is the type of wire fiber with a diameter of 1 mm and a length of 60 mm. Fiber variations used are 0%, 0.4%, 0.6% and 0.8% based on the weight of fresh concrete. Concrete mix (mix design) using SNI 03-2834-2000 about concrete mix planning with a test life of 28 days. The test results showed that the lowest average compressive strength of 12,291 MPa occurred at 0% variation and the highest average compressive strength value of 20,656 MPa at 0.8% fiber variation. The increase is caused by the even distribution of fibers in the concrete produced, the higher the variation that is given by the fiber, the better the fiber spread, from these fibers provide a fairly good contribution to the fiber concrete

Sign in / Sign up

Export Citation Format

Share Document