A Robust and Efficient Method of Designing Piles for Landslide Stabilization

2020 ◽  
Vol 26 (4) ◽  
pp. 481-492
Author(s):  
Yang Yu ◽  
Xingmin Li ◽  
Xiaohua Pan ◽  
Qing Lü
Keyword(s):  
Efficient Method ◽  
Large Scale ◽  
Polynomial Function ◽  
Design Method ◽  
Quadratic Polynomial ◽  
Soil Parameters ◽  
Stabilizing Piles ◽  
Geotechnical Design ◽  
The Mean ◽  
Landslide Stabilization

ABSTRACT Stabilizing pile is a widely used method to reduce the development of large-scale landslides. Optimizing the pile geometry is a great challenge in the design of stabilizing piles with the purpose of cost-effectiveness, especially for soil strength parameters with large uncertainty. The objective of this study is to propose a robust and efficient method of designing piles for landslide stabilization with the consideration of the safety of slope, uncertainty of soil parameters, and cost of stabilizing piles. A new response surface, which incorporates soil parameters and stabilizing force into a quadratic polynomial function, is first proposed. Unknown coefficients of the quadratic polynomial function are solved with a numerical method at typical sampling points. Based on the solved quadratic polynomial function, the mean and standard deviation of factor of safety (FOS) of the pile-stabilized slope as well as the signal-to-noise factor are then calculated in order to evaluate the design robustness. A framework based on the concept of robust geotechnical design is presented, and its feasibility is illustrated by two cases of soil slopes. The results indicate that the proposed robust geotechnical design method could be used to optimize the design of landslide-stabilizing piles.

scholarly journals Impact of climate, vegetation, soil and crop management variables on multi-year ISBA-A-gs simulations of evapotranspiration over a Mediterranean crop site

2015 ◽  
Vol 8 (2) ◽  
pp. 2053-2100 ◽  
Author(s):  
S. Garrigues ◽  
A. Olioso ◽  
D. Carrer ◽  
B. Decharme ◽  
E. Martin ◽  
...  
Keyword(s):  
Spatial Resolution ◽  
Soil Texture ◽  
Land Surface ◽  
Large Scale ◽  
Shortwave Radiation ◽  
Soil Parameters ◽  
Surface Model ◽  
Land Surface Parameter ◽  
The Mean ◽  
The Impact

Abstract. Generic land surface models are generally driven by large-scale forcing datasets to describe the climate, the surface characteristics (soil texture, vegetation dynamic) and the cropland management (irrigation). This paper investigates the errors in these forcing variables and their impacts on the evapotranspiration (ET) simulated from the Interactions between Soil, Biosphere, and Atmosphere (ISBA-A-gs) land surface model over a 12 year Mediterranean crop succession. We evaluate the forcing datasets used in the standard implementation of ISBA over France where the model is driven by the SAFRAN high spatial resolution atmospheric reanalysis, the Leaf Area Index (LAI) cycles derived from the Ecoclimap-II land surface parameter database and the soil texture derived from the French soil database. For climate, we focus on the radiations and rainfall variables and we test additional datasets which includes the ERA-Interim low spatial resolution reanalysis, the Global Precipitation Climatology Centre dataset (GPCC) and the MeteoSat Second Generation (MSG) satellite estimate of downwelling shortwave radiations. The methodology consists in comparing the simulation achieved using large-scale forcing datasets with the simulation achieved using local observations for each forcing variable. The relative impacts of the forcing variables on simulated ET are compared with each other and with the model uncertainties triggered by errors in soil parameters. LAI and the lack of irrigation in the simulation generate the largest mean deviations in ET between the large-scale and the local-scale simulations (equivalent to 24 and 19 months of ET over 12 yr). The climate induces smaller mean deviations equivalent to 7–8 months of ET over 12 yr. The soil texture has the lowest impact (equivalent to 3 months of ET). However, the impact of errors in the forcing variables is smaller than the impact triggered by errors in the soil parameters (equivalent to 27 months of ET). The absence of irrigation which represents 18% of cumulative rainfall over 12 years induces a deficit in ET of 14%. It generates much larger variations in incoming water for the model than the differences in rainfall between the reanalysis datasets. ET simulated with the Ecoclimap-II LAI climatology is overestimated by 18% over 12 years. This is related to the overestimation of the mean LAI over the crop cycle which reveals inaccurate representation of Mediterranean crop cycles. Compared to SAFRAN, the use of the ERA-I reanalysis, the GPCC rainfall and the downwelling shortwave radiation derived from the MSG satellite have little influence on the ET simulation performances. The error in yearly ET is mainly driven by the error in yearly rainfall and to a less extent by radiations. The SAFRAN and MSG satellite shortwave radiation estimates show similar negative biases (−9 and −11 W m−2). The ERA-I bias in shortwave radiations is 4 times smaller at daily time scale. Both SAFRAN and ERA-I underestimate longwave downwelling radiations by −12 and −16 W m−2, respectively. The biases in shortwave and longwave radiations show larger inter-annual variation for SAFRAN than for ERA-I. Regarding rainfall, SAFRAN and ERA-I/GPCC are slightly biased at daily and longer time scales (1 and 0.5% of the mean rainfall measurement). The SAFRAN rainfall estimates are more precise due to the use of the in situ daily rainfall measurements of the Avignon site in the reanalysis.

scholarly journals Quality Control in 3D Printing: Accuracy Analysis of 3D-Printed Models of Patient-Specific Anatomy

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1021
Author(s):  
Bernhard Dorweiler ◽  
Pia Elisabeth Baqué ◽  
Rayan Chaban ◽  
Ahmed Ghazy ◽  
Oroa Salem
Keyword(s):  
Wall Thickness ◽  
Large Scale ◽  
Fused Deposition Modeling ◽  
Vascular Anatomy ◽  
3D Models ◽  
Patient Specific ◽  
Stl File ◽  
Fused Deposition ◽  
3D Printed ◽  
The Mean

As comparative data on the precision of 3D-printed anatomical models are sparse, the aim of this study was to evaluate the accuracy of 3D-printed models of vascular anatomy generated by two commonly used printing technologies. Thirty-five 3D models of large (aortic, wall thickness of 2 mm, n = 30) and small (coronary, wall thickness of 1.25 mm, n = 5) vessels printed with fused deposition modeling (FDM) (rigid, n = 20) and PolyJet (flexible, n = 15) technology were subjected to high-resolution CT scans. From the resulting DICOM (Digital Imaging and Communications in Medicine) dataset, an STL file was generated and wall thickness as well as surface congruency were compared with the original STL file using dedicated 3D engineering software. The mean wall thickness for the large-scale aortic models was 2.11 µm (+5%), and 1.26 µm (+0.8%) for the coronary models, resulting in an overall mean wall thickness of +5% for all 35 3D models when compared to the original STL file. The mean surface deviation was found to be +120 µm for all models, with +100 µm for the aortic and +180 µm for the coronary 3D models, respectively. Both printing technologies were found to conform with the currently set standards of accuracy (<1 mm), demonstrating that accurate 3D models of large and small vessel anatomy can be generated by both FDM and PolyJet printing technology using rigid and flexible polymers.

scholarly journals Design of a Variable-Stiffness Compliant Skin for a Morphing Leading Edge

2021 ◽  
Vol 11 (7) ◽  
pp. 3165
Author(s):  
Zhigang Wang ◽  
Yu Yang
Keyword(s):  
Composite Laminate ◽  
Large Scale ◽  
Design Method ◽  
Leading Edge ◽  
Variable Stiffness ◽  
Manufacturing Constraints ◽  
Aircraft Wing ◽  
Noise Abatement ◽  
Civil Aircraft ◽  
Final Profile

A seamless and smooth morphing leading edge has remarkable potential for noise abatement and drag reduction of civil aircraft. Variable-stiffness compliant skin based on tailored composite laminate is a concept with great potential for morphing leading edge, but the currently proposed methods have difficulty in taking the manufacturing constraints or layup sequence into account during the optimization process. This paper proposes an innovative two-step design method for a variable-stiffness compliant skin of a morphing leading edge, which includes layup optimization and layup adjustment. The combination of these two steps can not only improve the deformation accuracy of the final profile of the compliant skin but also easily and effectively determine the layup sequence of the composite layup. With the design framework, an optimization model is created for a variable-stiffness compliant skin, and an adjustment method for its layups is presented. Finally, the deformed profiles between the directly optimized layups and the adjusted ones are compared to verify its morphing ability and accuracy. The final results demonstrate that the obtained deforming ability and accuracy are suitable for a large-scale aircraft wing.

scholarly journals Relationship between large-scale ionospheric field-aligned currents and electron/ion precipitations: DMSP observations

2020 ◽  
Vol 72 (1) ◽  
Author(s):  
Chao Xiong ◽  
Claudia Stolle ◽  
Patrick Alken ◽  
Jan Rauberg
Keyword(s):  
Time Distribution ◽  
Large Scale ◽  
Particle Flux ◽  
Particle Energy ◽  
Lower Latitude ◽  
Particle Precipitation ◽  
Data Set ◽  
The Mean ◽  
Two Parameters ◽  
Meteorological Satellite

Abstract In this study, we have derived field-aligned currents (FACs) from magnetometers onboard the Defense Meteorological Satellite Project (DMSP) satellites. The magnetic latitude versus local time distribution of FACs from DMSP shows comparable dependences with previous findings on the intensity and orientation of interplanetary magnetic field (IMF) By and Bz components, which confirms the reliability of DMSP FAC data set. With simultaneous measurements of precipitating particles from DMSP, we further investigate the relation between large-scale FACs and precipitating particles. Our result shows that precipitation electron and ion fluxes both increase in magnitude and extend to lower latitude for enhanced southward IMF Bz, which is similar to the behavior of FACs. Under weak northward and southward Bz conditions, the locations of the R2 current maxima, at both dusk and dawn sides and in both hemispheres, are found to be close to the maxima of the particle energy fluxes; while for the same IMF conditions, R1 currents are displaced further to the respective particle flux peaks. Largest displacement (about 3.5°) is found between the downward R1 current and ion flux peak at the dawn side. Our results suggest that there exists systematic differences in locations of electron/ion precipitation and large-scale upward/downward FACs. As outlined by the statistical mean of these two parameters, the FAC peaks enclose the particle energy flux peaks in an auroral band at both dusk and dawn sides. Our comparisons also found that particle precipitation at dawn and dusk and in both hemispheres maximizes near the mean R2 current peaks. The particle precipitation flux maxima closer to the R1 current peaks are lower in magnitude. This is opposite to the known feature that R1 currents are on average stronger than R2 currents.

scholarly journals Optimal Design of Novel Blade Profile for Savonius Wind Turbines

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3484
Author(s):  
Tai-Lin Chang ◽  
Shun-Feng Tsai ◽  
Chun-Lung Chen
Keyword(s):  
Wind Energy ◽  
Drag Force ◽  
Wind Turbines ◽  
Rural Areas ◽  
Large Scale ◽  
Design Method ◽  
Angular Position ◽  
Vertical Axis ◽  
Blade Profile ◽  
Main Concept

Since the affirming of global warming, most wind energy projects have focused on the large-scale Horizontal Axis Wind Turbines (HAWTs). In recent years, the fast-growing wind energy sector and the demand for smarter grids have led to the use of Vertical Axis Wind Turbines (VAWTs) for decentralized energy generation systems, both in urban and remote rural areas. The goals of this study are to improve the Savonius-type VAWT’s efficiency and oscillation. The main concept is to redesign a Novel Blade profile using the Taguchi Robust Design Method and the ANSYS-Fluent simulation package. The convex contour of the blade faces against the wind, creating sufficient lift force and minimizing drag force; the concave contour faces up to the wind, improving or maintaining the drag force. The result is that the Novel Blade improves blade performance by 65% over the Savonius type at the best angular position. In addition, it decreases the oscillation and noise accordingly. This study achieved its two goals.

scholarly journals Improved Visual Localization via Graph Filtering

2021 ◽  
Vol 7 (2) ◽  
pp. 20
Author(s):  
Carlos Lassance ◽  
Yasir Latif ◽  
Ravi Garg ◽  
Vincent Gripon ◽  
Ian Reid
Keyword(s):  
Image Retrieval ◽  
Large Scale ◽  
Visual Localization ◽  
Localization Accuracy ◽  
Additional Information ◽  
Feature Representations ◽  
The Mean ◽  
Classical Image ◽  
Vision Based Localization ◽  
Improve Reliability

Vision-based localization is the problem of inferring the pose of the camera given a single image. One commonly used approach relies on image retrieval where the query input is compared against a database of localized support examples and its pose is inferred with the help of the retrieved items. This assumes that images taken from the same places consist of the same landmarks and thus would have similar feature representations. These representations can learn to be robust to different variations in capture conditions like time of the day or weather. In this work, we introduce a framework which aims at enhancing the performance of such retrieval-based localization methods. It consists in taking into account additional information available, such as GPS coordinates or temporal proximity in the acquisition of the images. More precisely, our method consists in constructing a graph based on this additional information that is later used to improve reliability of the retrieval process by filtering the feature representations of support and/or query images. We show that the proposed method is able to significantly improve the localization accuracy on two large scale datasets, as well as the mean average precision in classical image retrieval scenarios.

scholarly journals Mesoscale Features Associated with Tropical Cyclone Formations in the Western North Pacific

2008 ◽  
Vol 136 (6) ◽  
pp. 2006-2022 ◽  
Author(s):  
Cheng-Shang Lee ◽  
Kevin K. W. Cheung ◽  
Jenny S. N. Hui ◽  
Russell L. Elsberry
Keyword(s):  
Tropical Cyclone ◽  
North Pacific ◽  
Western North Pacific ◽  
Large Scale ◽  
North Pacific Ocean ◽  
Deep Convection ◽  
Mesoscale Convective System ◽  
Convective System ◽  
Synoptic Patterns ◽  
The Mean

Abstract The mesoscale features of 124 tropical cyclone formations in the western North Pacific Ocean during 1999–2004 are investigated through large-scale analyses, satellite infrared brightness temperature (TB), and Quick Scatterometer (QuikSCAT) oceanic wind data. Based on low-level wind flow and surge direction, the formation cases are classified into six synoptic patterns: easterly wave (EW), northeasterly flow (NE), coexistence of northeasterly and southwesterly flow (NE–SW), southwesterly flow (SW), monsoon confluence (MC), and monsoon shear (MS). Then the general convection characteristics and mesoscale convective system (MCS) activities associated with these formation cases are studied under this classification scheme. Convection processes in the EW cases are distinguished from the monsoon-related formations in that the convection is less deep and closer to the formation center. Five characteristic temporal evolutions of the deep convection are identified: (i) single convection event, (ii) two convection events, (iii) three convection events, (iv) gradual decrease in TB, and (v) fluctuating TB, or a slight increase in TB before formation. Although no dominant temporal evolution differentiates cases in the six synoptic patterns, evolutions ii and iii seem to be the common routes taken by the monsoon-related formations. The overall percentage of cases with MCS activity at multiple times is 63%, and in 35% of cases more than one MCS coexisted. Most of the MC and MS cases develop multiple MCSs that lead to several episodes of deep convection. These two patterns have the highest percentage of coexisting MCSs such that potential interaction between these systems may play a role in the formation process. The MCSs in the monsoon-related formations are distributed around the center, except in the NE–SW cases in which clustering of MCSs is found about 100–200 km east of the center during the 12 h before formation. On average only one MCS occurs during an EW formation, whereas the mean value is around two for the other monsoon-related patterns. Both the mean lifetime and time of first appearance of MCS in EW are much shorter than those developed in other synoptic patterns, which indicates that the overall formation evolution in the EW case is faster. Moreover, this MCS is most likely to be found within 100 km east of the center 12 h before formation. The implications of these results to internal mechanisms of tropical cyclone formation are discussed in light of other recent mesoscale studies.

scholarly journals Well-Being of Healthcare Workers and the General Public during the COVID-19 Pandemic in Vietnam: An Online Survey

2021 ◽  
Vol 18 (9) ◽  
pp. 4737
Author(s):  
Tuyen Dinh Hoang ◽  
Robert Colebunders ◽  
Joseph Nelson Siewe Fodjo ◽  
Nhan Phuc Thanh Nguyen ◽  
Trung Dinh Tran ◽  
...  
Keyword(s):  
Healthcare Workers ◽  
Large Scale ◽  
Online Survey ◽  
Preventive Measures ◽  
Vaccine Coverage ◽  
Health Sector ◽  
Well Being ◽  
Multivariate Logistic Regression Model ◽  
The Mean ◽  
Restrictive Measures

The COVID-19 pandemic and associated restrictive measures implemented may considerably affect people’s lives. This study aimed to assess the well-being of Vietnamese people after COVID-19 lockdown measures were lifted and life gradually returned to normal. An online survey was organized from 21 to 25 April 2020 among Vietnamese residents aged 18 and over. The survey was launched by the Hue University of Medicine and Pharmacy. The WHO-5 Well-Being Index (scored 0–25) was used to score participants’ well-being. A multivariate logistic regression model was used to determine the predictors of well-being. A total of 1922 responses were analyzed (mean age: 31 years; 30.5% male; 88.2% health professionals or students in the health sector). The mean well-being score was 17.35 ± 4.97. Determinants of a high well-being score (≥13) included older age, eating healthy food, practicing physical exercise, working from home, and adhering to the COVID-19 preventive measures. Female participants, persons worried about their relatives’ health, and smokers were more likely to have a low well-being score. In conclusion, after the lockdown measures were lifted, the Vietnamese have people continued to follow COVID-19 preventive measures, and most of them scored high on the well-being scale. Waiting to achieve large-scale COVID-19 vaccine coverage, promoting preventive COVID-19 measures remains important, together with strategies to guarantee the well-being of the Vietnamese people.

scholarly journals Instability wave models for the near-field fluctuations of turbulent jets

2011 ◽  
Vol 689 ◽  
pp. 97-128 ◽  
Author(s):  
K. Gudmundsson ◽  
Tim Colonius
Keyword(s):  
Flow Field ◽  
Large Scale ◽  
Microphone Array ◽  
Near Field ◽  
Turbulent Jets ◽  
Instability Wave ◽  
Mean Flow ◽  
Velocity Fluctuations ◽  
The Mean ◽  
Scale Structures

AbstractPrevious work has shown that aspects of the evolution of large-scale structures, particularly in forced and transitional mixing layers and jets, can be described by linear and nonlinear stability theories. However, questions persist as to the choice of the basic (steady) flow field to perturb, and the extent to which disturbances in natural (unforced), initially turbulent jets may be modelled with the theory. For unforced jets, identification is made difficult by the lack of a phase reference that would permit a portion of the signal associated with the instability wave to be isolated from other, uncorrelated fluctuations. In this paper, we investigate the extent to which pressure and velocity fluctuations in subsonic, turbulent round jets can be described aslinearperturbations to the mean flow field. The disturbances are expanded about the experimentally measured jet mean flow field, and evolved using linear parabolized stability equations (PSE) that account, in an approximate way, for the weakly non-parallel jet mean flow field. We utilize data from an extensive microphone array that measures pressure fluctuations just outside the jet shear layer to show that, up to an unknown initial disturbance spectrum, the phase, wavelength, and amplitude envelope of convecting wavepackets agree well with PSE solutions at frequencies and azimuthal wavenumbers that can be accurately measured with the array. We next apply the proper orthogonal decomposition to near-field velocity fluctuations measured with particle image velocimetry, and show that the structure of the most energetic modes is also similar to eigenfunctions from the linear theory. Importantly, the amplitudes of the modes inferred from the velocity fluctuations are in reasonable agreement with those identified from the microphone array. The results therefore suggest that, to predict, with reasonable accuracy, the evolution of the largest-scale structures that comprise the most energetic portion of the turbulent spectrum of natural jets, nonlinear effects need only be indirectly accounted for by considering perturbations to the mean turbulent flow field, while neglecting any non-zero frequency disturbance interactions.

scholarly journals On interpreting studies of tracer transport by deep cumulus convection and its effects on atmospheric chemistry

2008 ◽  
Vol 8 (20) ◽  
pp. 6037-6050 ◽  
Author(s):  
M. G. Lawrence ◽  
M. Salzmann
Keyword(s):  
Atmospheric Chemistry ◽  
Large Scale ◽  
Deep Convection ◽  
Convective Transport ◽  
Advective Transport ◽  
Tracer Transport ◽  
Transport Models ◽  
Mass Fluxes ◽  
Split Treatment ◽  
The Mean

Abstract. Global chemistry-transport models (CTMs) and chemistry-GCMs (CGCMs) generally simulate vertical tracer transport by deep convection separately from the advective transport by the mean winds, even though a component of the mean transport, for instance in the Hadley and Walker cells, occurs in deep convective updrafts. This split treatment of vertical transport has various implications for CTM simulations. In particular, it has led to a misinterpretation of several sensitivity simulations in previous studies in which the parameterized convective transport of one or more tracers is neglected. We describe this issue in terms of simulated fluxes and fractions of these fluxes representing various physical and non-physical processes. We then show that there is a significant overlap between the convective and large-scale mean advective vertical air mass fluxes in the CTM MATCH, and discuss the implications which this has for interpreting previous and future sensitivity simulations, as well as briefly noting other related implications such as numerical diffusion.

Sign in / Sign up

Export Citation Format

Share Document