scholarly journals Degradation of Polyfurfuryl Alcohol-based Biopolymer by Soil-burial and Photo-degradation Methods

Author(s):  
Priyaragini Singh ◽  
K. Dinesh Kumar ◽  
Rakesh Kumar

Abstract Recently, polyfurfuryl alcohol (PFA) based material has been gaining attention. Despite its use as an intermediate in various industries, the degradation process of PFA has rarely been reported. In this study, neat PFA (PF) and polylactic acid (PLA) incorporated PFA (PF-PL) based thermoset biopolymers were prepared by casting method. The degradation of the prepared biopolymer specimens was carried out under environmental conditions via soil-burial test and photo-degradation method for 21-months. The extent of degradation of PF and PF-PL was assessed by evaluating weight loss, structural and morphological change by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM), respectively. Weight loss percentage in case of photo-degraded samples was found to be much higher compared to soil buried specimens. SEM micrographs showed a blistered surface with visible cracks on the surface of soil buried and photo-degraded samples. FTIR spectra of photo-degraded samples showed a new peak at 673 cm-1 indicating the furan ring opening during the degradation process. Significant variation in mechanical properties of PF and PF-PL specimens after soil-burial test also indicated biodegradable nature of the biopolymers. Approximately 45% and 63% of loss in tensile strength was obtained in PF and PF-PL soil buried specimens, respectively. All the obtained data revealed the fragmentation of biopolymers, hence supporting the biodegradable nature of PFA-based biopolymer.

Author(s):  
Aurélie Van Wylick ◽  
Elise Elsacker ◽  
Li Li Yap ◽  
Eveline Peeters ◽  
Lars de Laet

In the search for environmentally friendly materials, mycelium composites have been labelled as high potential bio-based alternatives to fossil-based and synthetic materials in various fields. Mycelium-based materials are praised for their biodegradability, however no scientific research nor standard protocols exist to substantiate this claim. This research therefore aims to develop an appropriate experimental methodology as well as to deliver a novel proof of concept of the material’s biodegradability. The applied methodology was adapted from a soil burial test under predefined laboratory conditions and hands-on preliminary experiments. The mycelium composite samples were placed in a nylon netting and then buried in potting soil with a grain size of 2 mm for different time-intervals ranging between one and sixteen weeks. Results showed that mycelium, which acted as the binder, had the tendency to decompose first. A weight loss of 43% was witnessed for inert samples made of the fungal strain Ganoderma resinaceum and hemp fibres after sixteen weeks. The disintegration rate in this method however depended on various parameters which were related to the material’s composition, its production method and the degradation process which involved the used equipment, materials and environmental properties.


2013 ◽  
Vol 538 ◽  
pp. 146-149 ◽  
Author(s):  
Xin De Tang ◽  
Jing Lun Zhou ◽  
Hai Rong Lu ◽  
Nian Feng Han

Polyethylene (PE) has found widespread use as a packaging material. Plastics waste disposal, as one of the serious environmental issues, has caused much criticism. The environmental oxidative- and bio- dual degradable linear low-density polyethylene (LLDPE) samples containing Eco-Benign Plastics (EBP) pro-oxidant additives were submitted to an investigation aimed at evaluating their preliminary oxidative degradation in natural environment or accelerated oven aging and their ultimate biodegradation in solid incubation substrate or soil composting conditions. Original and test samples submitted to abiotic oxidation including photo degradation and thermal degradation were characterized by means of FT-IR and GPC. Biodegradation test simulating soil burial and composting conditions reveals that the biodegradation degree exceeded 30%. The degradation process is accompanied by a dramatic change in the structural characteristics of the test samples. It is clear that LLDPE-EBP formulations are effective in promoting the oxidation and subsequent biodegradation of polyethylene in natural and soil environment.


2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Hemhong Anankaphong ◽  
Duanghathai Pentrakoon ◽  
Jirawut Junkasem

Poly(butylene succinate) (PBS) biocomposites incorporated with rubberwood powder (RWP) were fabricated with various RWP weight fractions (i.e., 0 to 40% wt) by injection moulding process. The soil burial test was employed to examine the biodegradability of such biocomposites under outdoor environment for 60 days. The physical appearance, percentage weight loss, chemical structure, and mechanical properties before and after the soil burial test were determined. Apparent changes in physical appearance of the biocomposites from optical micrographs were detected in terms of surface morphology and colour. The percentage of crystallinity of PBS/RWP biocomposites was studied by the X-ray diffraction (XRD) technique, and the XRD pattern revealed a decrease in percentage of crystallinity due to enhancing RWP weight fractions. This may be attributed to a presence of rubberwood powders providing more disordered molecular chain arrangement of PBS matrix and also an agglomeration of the rubberwood powder content at greater concentration as seen in SEM micrographs. With increasing RWP weight fractions and burial time, the results exhibited a considerable change in chemical structure (essentially ester linkage due to biodegradation mechanism of PBS), relatively greater percentage weight loss, and a substantial decrease in flexural properties. Consequently, the results indicate that incorporating RWP enhances biodegradability of PBS/RWP biocomposites; that is, the biodegradation rate of biocomposites increases with increasing RWP weight fractions and burial time.


Author(s):  
Prakash Bhuyar ◽  
Nurul Aqilah Binti Mohd Tamizi ◽  
Mohd Hasbi Ab. Rahim ◽  
Gaanty Pragas Maniam ◽  
Natanamurugaraj Govindan

In this study, the research was made to understand the knowledge widely related to the degradation process of polyethylene polymer. The mode of treatment that involves in the degradation process of polyethylene is physical treatment while the method of degradation used is photo-degradation of UV light. By using the physical treatment of UV irradiation light, it helps by affecting the bonding that holds the polymer together to break and weakens the plastic. From the result obtained in FTIR and SEM analysis, in FTIR spectrum of LDPE shows higher transmittance compared to FTIR spectrum of HDPE both UV-treated for 30 days. This indicates the high transmittance have few bonds to absorb light in the LDPE sample, low transmittance in HDPE sample means has high population of bonds which have vibrational energies corresponding to the incident light. For SEM result, the polyethylene for LDPE plastic sheet shows the best results for degradation and managed to reduce the weight loss at 87.5% compared to HDPE plastic which at 21.6%.


2022 ◽  
Vol 23 (1) ◽  
pp. 258-267
Author(s):  
Nur'Aishah Ahmad Shahrim ◽  
Norshahida Sarifuddin ◽  
Ahmad Zahirani Ahmad Azhar ◽  
Hafizah Hanim Mohd Zaki

The typical petroleum-based plastics have triggered environmental problems. For this purpose, biodegradable polymers such as starch are often used to manufacture biodegradable plastics. At present, the efforts are underway to extract starch as a promising biopolymer from mango seeds and subsequently to produce a biodegradable starch film to be used as plastic packaging. As such, in this work, glycerol-plasticized mango starch films were prepared using a solution casting process, using different amounts of citric acid as a cross-linking agent. The blend ratio of starch to glycerol was set at 3:5 wt. each, while the amount of citric acid ranged from 0 to 10 wt.%. Then, the casted films underwent 21 days of soil burial testing in the natural environment to determine their biodegradability behavior. The soil burial test is one of the common methods chosen to assess the biodegradability of polymers. The idea is that, by burying samples in the soil for a fixed time, samples are exposed to microorganisms (i.e. bacteria and fungi) present in the soil that serve as their food source. This is somehow likely to facilitate the process of deterioration. For this reason, the soil burial test can be regarded as an authentic approach to the process of deterioration in the natural environment. The films' susceptibility to biodegradation reactions was assessed within intervals of seven days through their physical appearance and weight loss. Interestingly, it was found that the cross-linked starch films have been observed to degrade slower than the non-cross-linked starch films as burial time progressed. The declining percentages of weight loss, as well as the presence of microorganisms and eroded surface on the films observed by SEM, explained the degradation behavior of the cross-linked starch films compared to the non-cross-linked starch films. Hence it is believed that cross-linked starch-glycerol films are biodegradable in soil, henceforth, the potential to be commercialized as a biodegradable packaging material soon. At the same time, this plastic packaging is expected to be recognized as a value-added product since the raw materials ergo mango seeds utilized to develop this product are from waste, therefore, environmentally friendly. ABSTRAK: Plastik yang berasaskan petroleum telah mencetuskan masalah persekitaran. Untuk tujuan ini, polimer biodegradasi seperti kanji sering digunakan untuk membuat plastik yang boleh terurai. Pada masa ini, usaha sedang dilakukan untuk mengekstrak pati sebagai biopolimer yang menjanjikan dari biji mangga dan kemudiannya menghasilkan filem pati yang terbiodegradasi untuk digunakan sebagai kemasan plastik. Oleh yang demikian, dalam karya ini, filem pati mangga plastik-gliserol disusun menggunakan proses pemutus larutan, menggunakan jumlah asid sitrik yang berlainan sebagai agen penghubung silang. Nisbah campuran pati dan gliserol ditetapkan pada 3:5 wt.% masing-masing, sementara jumlah asid sitrik berkisar antara 0 hingga 10 wt.% berat. Kemudian, sampel plastik tersebut ditanam di dalam tanah selama 21 hari di persekitaran semula jadi untuk menentukan tingkah laku biodegradasinya. Ujian penguburan tanah adalah salah satu kaedah biasa yang dipilih untuk menilai biodegradasi polimer. Ideanya adalah bahawa, dengan menguburkan sampel di tanah untuk waktu yang tetap, sampel terdedah kepada mikroorganisma (iaitu bakteria dan jamur) yang terdapat di dalam tanah yang berfungsi sebagai sumber makanan mereka. Ini mungkin memudahkan proses kemerosotan. Atas sebab ini, ujian penguburan tanah dapat dianggap sebagai pendekatan yang sahih terhadap proses kemerosotan di persekitaran semula jadi. Kerentanan filem terhadap reaksi biodegradasi dinilai dalam selang waktu tujuh hari melalui penampilan fizikal dan penurunan berat badan. Menariknya, didapati bahawa filem-filem pati berangkai silang telah dilihat menurun lebih perlahan daripada filem-filem pati yang tidak bersilang ketika masa pengebumian berlangsung. Peratusan penurunan berat badan yang menurun, serta kehadiran mikroorganisma dan permukaan yang terhakis pada filem yang diperhatikan oleh SEM, menjelaskan tingkah laku degradasi filem pati berangkai silang berbanding dengan filem pati yang tidak bersilang. Oleh itu, dipercayai bahawa filem kanji-gliserol berangkai silang dapat terbiodegradasi di dalam tanah, dan seterusnya, potensi untuk dikomersialkan sebagai bahan pembungkusan yang boleh terurai tidak lama lagi. Pada masa yang sama, pembungkusan plastik ini diharapkan dapat diakui sebagai produk bernilai tambah kerana bahan mentah ergo mangga yang digunakan untuk mengembangkan produk ini adalah dari sisa, oleh itu, mesra alam.


2019 ◽  
Vol 3 (2) ◽  
pp. 60
Author(s):  
Iuliana Raut ◽  
Mariana Calin ◽  
Zina Vuluga ◽  
Elvira Alexandrescu ◽  
Melania Liliana Arsene ◽  
...  

Polypropylene–cellulose composites have great potential in many important commercial applications, and it is important to understand and properly evaluate their biodegradative behavior to achieve improved composite formulations in accordance with their future applications. In the present study, an outdoor soil burial test was performed in order to evaluate the susceptibility to degradation of polyolefins–cellulose composites. The structural and morphological changes were analyzed by Fourier transform infra-red spectroscopy with attenuated total reflectance (FTIR-ATR) and scanning electron microscopy (SEM). The weight loss of composite samples after burying in soil was recorded. The presence of new bands, as an indicator of degradation, was confirmed by FTIR-ATR spectra. The thermal stability of the composites after soil burial analyzed by TGA was slightly improved, with relatively higher temperatures being required to decompose the samples after exposure to environmental factors. SEM micrographs presented some modifications of the polymer surface, such as holes, cracks, exfoliations, and fractures. Increasing the cellulose percentage of the composite samples led to increased weight loss. From the obtained results, it can be concluded that composites based on polyolefins and renewable resources undergo a slow process of biodegradation after contact with environmental microorganisms and, with appropriate composition, could be applied to various environmental fields.


2019 ◽  
Vol 39 (8) ◽  
pp. 744-751 ◽  
Author(s):  
Roli Purwar ◽  
Anjali Verma ◽  
Radhika Batra

Abstract In this study we have prepared flexible gelatin/sericin/clay blend films for packaging applications of hygiene products. Gelatin/sericin (3:1, 1:1 and 1:3 w/w ratios) films were prepared using glutaraldehyde as a crosslinking agent and glycerol as a plasticizer by the solution casting method. The concentrations of gelatin and sericin were optimized on the basis of their mechanical properties. Closite 30B and copper-modified montmorillonite clay (with concentration of 1–5%) were incorporated into the optimized gelatin/sericin blend films in order to improve the mechanical and antimicrobial properties. The water vapor transmission rate of the film samples was also studied. The soil burial test showed very good biodegradability of the blends films. The antimicrobial testing revealed efficient activity of these blend films against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. Hence, on the basis of the above-mentioned properties, these films can be considered as promising candidates for packaging of hygiene maintenance products.


2013 ◽  
Vol 844 ◽  
pp. 406-409 ◽  
Author(s):  
Siti Rohana Yahya ◽  
Azura A. Rashid ◽  
Baharin Azahari

Starch is added into the natural rubber (NR) latex as filler to assist the biodegradation of NR latex which normally takes longer period to biodegrade. The soil burial test for 1, 2, 3 and 4 weeks at room temperature was carried out on the unfilled-, 10% starch-, and alkali gelatinized starch-filled NR latex films. The progress of biodegradation was investigated through weight loss measurement, tensile test, scanning electron microscopy (SEM), and fourier transform infrared spectrometry (FTIR) analysis. Results indicated that the NR latex films showed an obvious increment of weight loss percentages after buried for 4 weeks compared to the control films. The 10% alkali gelatinized starch performed the tensile strength retained up to two weeks before decreased at longer soil burial periods. Referring to morphological analysis, the voids on the NR latex films became larger with the addition of starch. From FTIR analysis, the addition alkali gelatinized starch was increased the hydroxyl and carbonyl groups in NR latex films after 4 weeks of soil burial test.


2021 ◽  
Vol 12 (2) ◽  
Author(s):  
Nanda Raudhatil Jannah ◽  
Novesar Jamarun ◽  
Yulia Eka Putri

Bioplastics are bio-based plastics from natural resources, made to replace conventional plastics. The utilization of biopolymers in bioplastics provide a faster degradation compared to petroleum-based plastics. Starch-based bioplastic from mixing Durio zibethinus Murr starch and glycerol as plasticizer have been conducted. In this research, the concentration of glycerol has been varied to study the effect on starch-based bioplastics mechanical properties. The tensile strength for Durio zibethinus Murr starch-based bioplastic with 20% glycerol was 50.28 MPa with 13.3% elongation. The functional group found on the Fourier transform infrared spectroscopy (FTIR) spectra indicated the presence of O-H stretch, C-H stretch, C=O stretch, and C-O stretch which stated the formation of bioplastic. The image results gained from scanning electron microscope (SEM) showed that the morphology surface of bioplastic was less homogenous and rough. The soil burial test for biodegradability showed Durio zibethinus Murr starch-based bioplastic achieved 38.9% weight loss in a 5-day observation.


Sign in / Sign up

Export Citation Format

Share Document