scholarly journals Diachronous Settlement on the Territory of the Turgay Trough

2021 ◽  
Vol 66 (2) ◽  
pp. 602-629
Author(s):  
Elena V. Podzuban ◽  
Keyword(s):  
Material Culture ◽  
Raw Materials ◽  
Archaeological Site ◽  
The West ◽  
Secondary Processing ◽  
Field Season ◽  
Cultural Layers ◽  
Stone Industry ◽  
Primary Cleavage ◽  
Independent Indicator

The article introduces into the scholarship the collection of findings of prehistoric material culture obtained at Bestamak during the stationary studies of 2001 field season. The total area of the archaeological site is 260,000 m2. It was excavated by Turgay expedition in the 1980s. Bestamak settlement is situated on the Turgay trough connecting the West Siberian and Turan plains. In the west, the Turgay trough is bounded by the Trans-Ural Plateau; in the east — by the Kazakh upland and spurs of the Ulutau mountains. Natural and geographical features of Turgay trough allow for their cultural layers to mainly contain diachronous material, with Bestamak serving as an example. Due to this specificity, the collections of stone industry discovered in the monuments of the Turgay trough should be studied on the basis of technical and typological analysis, the main parameters of which being products of primary cleavage; morphological parameters of the plates, the size of plates and tools on the plates; percentage ratio of ingots and tools from plates and rock flakes; secondary processing methods; typological composition of tool kit. The composition of raw materials is used as an independent indicator. In the course of the research, the author concluded that the primary cleavage, nuclei “rejuvenation” and secondary processing of blanks were performed on the site of the settlement. Judging by the results of the technical and typological analysis, the stone industry was deposited from the end of the Mesolithic-the Early Neolithic to the Late Eneolithic. The Neolithic stone industries, starting from the early and late Eneolithic, are predominant at Bestamak. The presence of Mesolithic and Early Eneolithic stone industries on the site is just an assumption. Fragments of ceramics and metal products suggest that people stayed at Bestamak until Late Bronze.

scholarly journals Karasor-2 Site in the Upper Tobol

2020 ◽  
Vol 22 (3) ◽  
pp. 636-647
Author(s):  
E. V. Podzuban
Keyword(s):  
Material Culture ◽  
Bronze Age ◽  
Archaeological Site ◽  
Stone Tools ◽  
Time Range ◽  
Cultural Layer ◽  
The West ◽  
Cultural Affiliation ◽  
Stone Industry ◽  
The Town

The present article introduces a collection of prehistoric material culture finds obtained at the Karasor-2 site during a stationary study of the Karasor archaeological site in 1998. A group of Karasor monuments is located near the town of Lisakovsk in the Upper Tobol river valley, which is in the northern Turgai depression. The territory of the Turgai depression connects the West Siberian and Turan plains. The Turgai depression borders on the Trans-Ural Plateau in the west and on the Kazakh hillocky area and the spur of the Ulutau mountains in the east. The local nature and geography destroy the cultural layer on the monuments. Thus, the finds represented by fragments of ceramics and stone products at the Karasor-2 site were collected from the surface, as the cultural layer had been destroyed. The article gives descriptive characteristics of the ceramics, while the stone tools were studied with the technical and typological method. Since the ceramic fragments are too small, the dating and cultural affiliation of the artifacts was based on the results of the technical and typological analysis of the stone tools. Most likely, the stone finds date back to the Mesolithic and Late Eneolithic periods. Most tools are similar to the stone industry of the Tersek culture and belong to the Eneolithic Age. The author believes that the time range of the stone tools and ceramics is from the Late Mesolithic to the Bronze Age.

scholarly journals Karasor-3 Site in the Upper Tobol

2021 ◽  
Vol 23 (1) ◽  
pp. 52-61
Author(s):  
E. V. Podzuban
Keyword(s):  
Iron Age ◽  
Raw Materials ◽  
Stone Tools ◽  
Early Iron Age ◽  
Cultural Layer ◽  
The West ◽  
Stone Industry ◽  
The Town ◽  
Archeological Site ◽  
Independent Indicator

The paper introduces a collection of prehistoric artifacts from Karasor-3 archeological site (1999). The Karasor cluster is located in the Upper Tobol region near the town of Lisakovsk, in the northern part of the Turgai depression, which connects the West Siberian and Turan plains. The Turgai depression borders on the Trans-Ural Plateau on the west and on the Kazakh hummocks and the Ulutau Mountains on the east. This environment does not contribute to the preservation of the cultural layer. As a result, the pottery and stone fragments found at the Karasor 3 site were collected from the surface. The article contains a detailed description of the pottery. The stone tools underwent a technical and typological analysis based on the products of primary splitting, morphological parameters and size of plates, the ratio of blanks and tools made of plates and flakes, methods of secondary processing, and typological composition of the tool kit. The nature of the raw materials was considered as an independent indicator. The stone industry of the Late Eneolithic era proved similar to the Tersek culture. The pottery ranged from the Late Eneolithic to the Early Iron Age.

scholarly journals Mesolithic Sites in the Upper Tobol

2022 ◽  
Vol 23 (4) ◽  
pp. 897-910
Author(s):  
E. V. Podzuban
Keyword(s):  
Bronze Age ◽  
Iron Age ◽  
Raw Materials ◽  
Archaeological Site ◽  
Stone Tools ◽  
Early Iron Age ◽  
Forest Steppe ◽  
Arrow Head ◽  
Stone Industry ◽  
The Town

The article introduces prehistoric artifacts from the sites of Karasor-5, Karasor-6, and Karasor-7 obtained in 1998. The archaeological site of Karasor is located in the Upper Tobol region, near the town of Lisakovsk. Stone tools, pottery fragments, a ceramic item, and a bronze arrow head were collected from a sand blowout, which had destroyed the cultural layer. The paper gives a detailed description of the pottery. The stone tools were examined using the technical and typological analysis, which featured the primary splitting, the morphological parameters and size of plates, the ratio of blanks, plates, flakes, and finished tools, the secondary processing methods, and the typological composition of the tools. The nature of the raw materials was counted as an independent indicator. The pottery fragments, the bronze arrow head, and the ceramic item belonged to the Bronze Age and the Early Iron Age. The stone industry of the Karasor archeological cluster proved to be a Mesolithic monument of the Turgai Trough. The technical and typological analysis revealed a close similarity with the Mesolithic sites of the Southern and Middle Trans-Urals, as well as the forest-steppe part of the Tobol-Irtysh interfluve. The stone artifacts were dated from the Mesolithic to the Early Iron Age.

scholarly journals Central Sites and the Development of Rural Settlements from the Middle to Late La Tène Period in Central Moravia

2021 ◽  
Vol 112 ◽  
pp. 197-236
Author(s):  
Ivan Čižmář ◽  
Alžběta Danielisová
Keyword(s):  
Material Culture ◽  
Strong Influence ◽  
Raw Materials ◽  
Central Place ◽  
Extensive Study ◽  
Rural Settlements ◽  
Long Distance ◽  
The West ◽  
Central Places ◽  
Morava River

At a certain point in time, there were two central places in central Moravia: an older unfortified central agglomeration near the present-day village of Němčice nad Hanou and a younger oppidum at Staré Hradisko. Each of this centres had its own approach to raw materials, orientation of the socio-economic contacts, and possibly political focus as well. Němčice, being located at one of the main branches of the Amber Road, connected the Middle Danube area from the Mediterranean to the Adriatic; Staré Hradisko eventually expanded these contacts into a systematic trade network, being under the strong influence of the Bohemian region with links to Bavaria. During the LT C2, in addition to the location of the central place, changes took place in terms of material culture and settlement strategies in the region. This was further accentuated in LT D1 by the shift of settlements towards the west, to the vicinity of the oppidum and, at the same time, vacation of the corridor around the Morava River. In an attempt to chronologically assess the settlement pattern, it became evident how important it is to define, as precisely as possible, the dating of individual sites. This was only possible thanks to the detailed and extensive study of the material available (Čižmář 2018). Thanks to precise dating of settlements and classification based on the new chronology, the seemingly illogical group of settlements in central Moravia revealed a distinct settlement network which, in particular during the period contemporary with the oppidum, allows us to see the significant changes in the number of sites and in the orientation of long-distance contacts that were possibly associated with historical events.

scholarly journals THE STONE AGE DOLGOE 11 SITE IN THE SAVINSKIY DISTRICT, IVANOVO REGION: FIRST RESULTS OF DATING BY THE OPTICALLY SIMULATED LUMINESCENCE METHOD

2021 ◽  
pp. 117-128
Author(s):  
В. А. Аверин ◽  
А. Л. Александровский ◽  
Н. О. Викулова ◽  
Р. Н. Курбанов
Keyword(s):  
Raw Materials ◽  
Archaeological Site ◽  
Cultural Layer ◽  
Luminescence Method ◽  
Technological Characteristics ◽  
Archaeological Materials ◽  
First Results ◽  
Cultural Layers ◽  
Materials Used ◽  
Interdisciplinary Study

В статье рассматриваются результаты междисциплинарного исследования малоизвестного в настоящее время археологического памятника Долгое 11. Приводятся детальное литологическое описание разреза, подробные характеристики строения палеопочв, положения четко различимых двух культурных слоев. Археологические материалы из верхнего и нижнего культурных слоев сильно отличаются друг от друга как по сырью, из которого они изготовлены, так и по типологическим и технологическим характеристикам. Абсолютная хронология полученная методом ОСЛ позволила определить возраст нижнего культурного горизонта -около 13,5-14 тыс. л. н. Расселение древних людей в районе стоянки происходило в условиях потепления аллереда, поэтому этот культурный слой коррелируется с палеолитом. Верхний культурный горизонт сформировался уже в голоцене - в эпоху мезолита (около 9 тыс. л. н.), как показало исследование, рельеф стабилизировался в это время из-за повсеместного развития растительности. The article discusses the results of the interdisciplinary study of the presently little-known Dolgoe 11 archaeological site. The materials of the lithological description of the section, detailed characteristics of the structure of paleosols, the positions of clearly distinguished two cultural layers are given. Archaeological materials from the upper and lower cultural layers are very different from each other, both in the raw materials used for their shaping, and in typological and technological characteristics. The absolute chronology from OSL dating allows determine the age of the lower cultural horizon about 13,5-14 thousand years ago. The settlement of humans in the area of the site occurred under the conditions of Allerod warming, therefore, this cultural layer is correlated with Paleolithic. The upper cultural horizon was formed already in the Holocene -in the Mesolithic era (about 9 thousand years ago). during relief stabilisation due to the widespread development of vegetation.

scholarly journals Comparative Study of the Properties of Wood Flour and Wood Pellets Manufactured from Secondary Processing Mill Residues

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2487
Author(s):  
Geeta Pokhrel ◽  
Yousoo Han ◽  
Douglas J. Gardner
Keyword(s):  
Moisture Content ◽  
Bulk Density ◽  
Raw Materials ◽  
Wood Flour ◽  
The United States ◽  
Red Maple ◽  
Wood Pellets ◽  
Secondary Processing ◽  
Material Costs ◽  
Mill Residues

The generation of secondary processing mill residues from wood processing facilities is extensive in the United States. Wood flour can be manufactured utilizing these residues and an important application of wood flour is as a filler in the wood–plastic composites (WPCs). Scientific research on wood flour production from mill residues is limited. One of the greatest costs involved in the supply chain of WPCs manufacturing is the transportation cost. Wood flour, constrained by low bulk densities, is commonly transported by truck trailers without attaining allowable weight limits. Because of this, shipping costs often exceed the material costs, consequently increasing raw material costs for WPC manufacturers and the price of finished products. A bulk density study of wood flour (190–220 kg/m3) and wood pellets (700–750 kg/m3) shows that a tractor-trailer can carry more than three times the weight of pellets compared to flour. Thus, this study focuses on exploring the utilization of mill residues from four wood species in Maine to produce raw materials for manufacturing WPCs. Two types of raw materials for the manufacture of WPCs, i.e., wood flour and wood pellets, were produced and a study of their properties was performed. At the species level, red maple 40-mesh wood flour had the highest bulk density and lowest moisture content. Spruce-fir wood flour particles were the finest (dgw of 0.18 mm). For all species, the 18–40 wood flour mesh size possessed the highest aspect ratio. Similarly, on average, wood pellets manufactured from 40-mesh particles had a lower moisture content, higher bulk density, and better durability than the pellets from unsieved wood flour. Red maple pellets had the lowest moisture content (0.12%) and the highest bulk density (738 kg/m3). The results concluded that the processing of residues into wood flour and then into pellets reduced the moisture content by 76.8% and increased the bulk density by 747%. These material property parameters are an important attempt to provide information that can facilitate the more cost-efficient transport of wood residue feedstocks over longer distances.

scholarly journals Architectural ruins: geoculture of the anatomy of buildings as illustrated by Casa Ippolito, Malta

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Lino Bianco
Keyword(s):  
Material Culture ◽  
Building Materials ◽  
Raw Materials ◽  
Primary Source ◽  
Secondary Sources ◽  
Non Invasive ◽  
History Of ◽  
Aerial Vehicle ◽  
Materials Used ◽  
Building Physics

AbstractRuins are a statement on the building materials used and the construction method employed. Casa Ippolito, now in ruins, is typical of 17th-century Maltese aristocratic country residences. It represents an illustration of secondary or anthropogenic geodiversity. This paper scrutinises these ruins as a primary source in reconstructing the building’s architecture. The methodology involved on-site geographical surveying, including visual inspection and non-invasive tests, a geological survey of the local lithostratigraphy, and examination of notarial deeds and secondary sources to support findings about the building’s history as read from its ruins. An unmanned aerial vehicle was used to digitally record the parlous state of the architectural structure and karsten tubes were used to quantify the surface porosity of the limestone. The results are expressed from four perspectives. The anatomy of Casa Ippolito, as revealed in its ruins, provides a cross-section of its building history and shows two distinct phases in its construction. The tissue of Casa Ippolito—the building elements and materials—speaks of the knowledge of raw materials and their properties among the builders who worked on both phases. The architectural history of Casa Ippolito reveals how it supported its inhabitants’ wellbeing in terms of shelter, water and food. Finally, the ruins in their present state bring to the fore the site’s potential for cultural tourism. This case study aims to show that such ruins are not just geocultural remains of historical built fabric. They are open wounds in the built structure; they underpin the anatomy of the building and support insights into its former dynamics. Ruins offer an essay in material culture and building physics. Architectural ruins of masonry structures are anthropogenic discourse rendered in stone which facilitate not only the reconstruction of spaces but also places for human users; they are a statement on the wellbeing of humanity throughout history.

Metal burial: Understanding caching behaviour and contact material culture in Australia's NE Kimberley

2021 ◽  
Vol 21 (1) ◽  
pp. 28-52
Author(s):  
Sam Harper ◽  
Ian Waina ◽  
Ambrose Chalarimeri ◽  
Sven Ouzman ◽  
Martin Porr ◽  
...  
Keyword(s):  
Material Culture ◽  
Cultural Practices ◽  
Raw Materials ◽  
Cross Cultural ◽  
Contact Material ◽  
Northern Australia ◽  
Assemblage Theory ◽  
Close Proximity ◽  
History Of ◽  
Human Burials

This paper explores identity and the recursive impacts of cross-cultural colonial encounters on individuals, cultural materials, and cultural practices in 20th-century northern Australia. We focus on an assemblage of cached metal objects and associated cultural materials that embody both Aboriginal tradition and innovation. These cultural materials were wrapped in paperbark and placed within a ring of stones, a bundling practice also seen in human burials in this region. This ‘cache' is located in close proximity to rockshelters with rich, superimposed Aboriginal rock art compositions. However, the cache shelter has no visible art, despite available wall space. The site shows the utilisation of metal objects as new raw materials that use traditional techniques to manufacture a ground edge metal axe and to sharpen metal rods into spears. We contextualise these objects and their hypothesised owner(s) within narratives of invasion/contact and the ensuing pastoral history of this region. Assemblage theory affords us an appropriate theoretical lens through which to bring people, places, objects, and time into conversation.

Pots on mats: mat-impressed salt-extraction pottery at Chalcolithic Provadia-Solnitsata, Bulgaria

Antiquity ◽  
2021 ◽  
pp. 1-16
Author(s):  
Mila Andonova ◽  
Vassil Nikolov
Keyword(s):  
Material Culture ◽  
Large Scale ◽  
Raw Materials ◽  
Salt Production ◽  
Production And Consumption ◽  
Late Chalcolithic ◽  
South Eastern Europe ◽  
Materials Used ◽  
The Relationship

Evidence for both basket weaving and salt production is often elusive in the prehistoric archaeological record. An assemblage of Middle–Late Chalcolithic pottery from Provadia-Solnitsata in Bulgaria provides insight into these two different technologies and the relationship between them. The authors analyse sherds from vessels used in large-scale salt production, the bases of which bear the impression of woven mats. This analysis reveals the possible raw materials used in mat weaving at Provadia-Solnitsata and allows interpretation of the role of these mats in salt production at the site. The results illustrate how it is possible to see the ‘invisible’ material culture of prehistoric south-eastern Europe and its importance for production and consumption.

Perhitungan Harga Pokok Produksi (Cost) Hasil Produk Inovatif UMKM Desa Kemuning Ngargoyoso Jawa Tengah

2021 ◽  
Vol 2 (2) ◽  
pp. 89-96
Author(s):  
Lailah Fujianti ◽  
Shinta Budi Astuti ◽  
Rizki Ramadhan Putra Yasa
Keyword(s):  
Local Government ◽  
Raw Materials ◽  
Production Costs ◽  
The South ◽  
The West ◽  
The North ◽  
Central Java ◽  
Innovative Products ◽  
The Cost ◽  
Central Java Province

Abstrak   Kemuning adalah desa di kecamatan Ngargoyoso, Kabupaten Karanganyar, Provinsi Jawa Tengah. Secara geografis batas Desa Kemuning  sebelah barat berbatasan dengan Desa Ngargoyoso, sebelah timur berbatasan dengan Desa Segoro Gunung, sebelah Utara  berbatasan Kecamatan Jenawi dan sebelah selatan berbatasan Desa Girimulyo. Desa ini memiliki Misi yang ingin diwujudkan  yaitu Desa Wisata. Pemerintah setempat  memberikan pelatihan untuk membuat produk inovatif guna melengkapi kebutuhan sebagai desa wisata kepada pelaku UMKM dan Penrajin. Produk Inovatif tersebut akan dijual kepada pengunjung wisata sebagai oleh-oleh. Akan tetapi pelaku UMKM dan Penrajin memiliki kelemahan pembukuan usaha terlebih lagi dalam penetuan biaya produksi produk inovatif. Mereka hanya memperhitungkan biaya bahan baku sebagai komponen biaya produksi.   Tim pengabdian FEB Universitas melaksanakan pengabdian  untuk memberikan materi mengenai konsep perhitungan biaya produksi yang dilakukan dengan interaktif.     Kata Kunci: Desa Kemuning, Harga Pokok Poduksi, Smart Village   Abstract:  Kemuning Villages is one of the villages located in Ngargoyoso district, Karanganyar Regency, Central Java Province. Geographically, Kemuning Village is bordered to the west by Ngargoyoso Village, to the east by Segoro Gunung Village, to the north by Jenawi District and to the south by Girimulyo Village. Kemuning village has a mission to be realized, namely the Tourism Village. The local government provides training to make innovative products to complement the needs of a tourism village for MSMEs and craftsmen. These innovative products will be sold to tourist visitors as souvenirs. However, SMEs and craftsmen have weaknesses in business bookkeeping, especially in determining the cost of producing innovative products. They only take into account the cost of raw materials as a component of production costs. The Team from FEB University Pancasila carried out the service to provide material on the concept of calculating production costs which was carried out interactively.     Keywords: Desa Kemuning, Cost of Good Sold, Smart Village

Sign in / Sign up

Export Citation Format

Share Document