Evolving artificial intelligence techniques to model the hydrate-based desalination process of produced water

Abstract In this study, two artificial intelligence models based on an adaptive neuro-fuzzy inference system (ANFIS) and a support vector machine (SVM) technique have been successfully developed to predict the desalination efficiency of produced water through a hydrate-based desalination treatment process. A genetic algorithm as an evolutionary optimization method has been used to determine the optimal values of SVM model coefficients. To this end, compressed natural gas and CO2 hydrate formation experiments were carried out, and the desalination efficiency of produced water was measured and utilized for model training and validation. After model development, graphical and statistical analysis approaches have been applied to evaluate the performance of suggested models by a comparison of model predictions with measured experimental data. For the ANFIS model, the coefficient of determination (R2) and average absolute relative error (AARE) are 0.9927 and 0.58%, respectively. The values of AARE and R2 for the SVM model are obtained 0.35% and 0.9985, respectively. These statistical criteria confirm excellent accuracy and robustness of intelligent models in predicting the desalination efficiency of produced water through the hydrate-based desalination treatment process. Furthermore, the Leverage statistical technique has been carried out to define the outliers. The obtained results demonstrate that all experimental data are reliable and both ANFIS and SVM models are statistically valid.

Download Full-text

Estimation of Oil Recovery Factor for Water Drive Sandy Reservoirs through Applications of Artificial Intelligence

Energies ◽

10.3390/en12193671 ◽

2019 ◽

Vol 12 (19) ◽

pp. 3671 ◽

Cited By ~ 8

Author(s):

Ahmed Mahmoud ◽

Salaheldin Elkatatny ◽

Weiqing Chen ◽

Abdulazeez Abdulraheem

Keyword(s):

Artificial Intelligence ◽

Oil Recovery ◽

Water Saturation ◽

Data Availability ◽

Recovery Factor ◽

Coefficient Of Determination ◽

Support Vector ◽

Subtractive Clustering ◽

Oil Viscosity ◽

Inference System

Hydrocarbon reserve evaluation is the major concern for all oil and gas operating companies. Nowadays, the estimation of oil recovery factor (RF) could be achieved through several techniques. The accuracy of these techniques depends on data availability, which is strongly dependent on the reservoir age. In this study, 10 parameters accessible in the early reservoir life are considered for RF estimation using four artificial intelligence (AI) techniques. These parameters are the net pay (effective reservoir thickness), stock-tank oil initially in place, original reservoir pressure, asset area (reservoir area), porosity, Lorenz coefficient, effective permeability, API gravity, oil viscosity, and initial water saturation. The AI techniques used are the artificial neural networks (ANNs), radial basis neuron networks, adaptive neuro-fuzzy inference system with subtractive clustering, and support vector machines. AI models were trained using data collected from 130 water drive sandstone reservoirs; then, an empirical correlation for RF estimation was developed based on the trained ANN model’s weights and biases. Data collected from another 38 reservoirs were used to test the predictability of the suggested AI models and the ANNs-based correlation; then, performance of the ANNs-based correlation was compared with three of the currently available empirical equations for RF estimation. The developed ANNs-based equation outperformed the available equations in terms of all the measures of error evaluation considered in this study, and also has the highest coefficient of determination of 0.94 compared to only 0.55 obtained from Gulstad correlation, which is one of the most accurate correlations currently available.

Download Full-text

Real-Time Prediction of Rate of Penetration in S-Shape Well Profile Using Artificial Intelligence Models

Sensors ◽

10.3390/s20123506 ◽

2020 ◽

Vol 20 (12) ◽

pp. 3506 ◽

Cited By ~ 1

Author(s):

Salaheldin Elkatatny

Keyword(s):

Artificial Intelligence ◽

Real Time ◽

Support Vector ◽

Empirical Correlations ◽

Validation Data ◽

Inference System ◽

Rate Of Penetration ◽

Drilling Parameters ◽

Svm Model ◽

Data Points

Rate of penetration (ROP) is defined as the amount of removed rock per unit area per unit time. It is affected by several factors which are inseparable. Current established models for determining the ROP include the basic mathematical and physics equations, as well as the use of empirical correlations. Given the complexity of the drilling process, the use of artificial intelligence (AI) has been a game changer because most of the unknown parameters can now be accounted for entirely at the modeling process. The objective of this paper is to evaluate the ability of the optimized adaptive neuro-fuzzy inference system (ANFIS), functional neural networks (FN), random forests (RF), and support vector machine (SVM) models to predict the ROP in real time from the drilling parameters in the S-shape well profile, for the first time, based on the drilling parameters of weight on bit (WOB), drillstring rotation (DSR), torque (T), pumping rate (GPM), and standpipe pressure (SPP). Data from two wells were used for training and testing (Well A and Well B with 4012 and 1717 data points, respectively), and one well for validation (Well C) with 2500 data points. Well A and Well B data were combined in the training-testing phase and were randomly divided into a 70:30 ratio for training/testing. The results showed that the ANFIS, FN, and RF models could effectively predict the ROP from the drilling parameters in the S-shape well profile, while the accuracy of the SVM model was very low. The ANFIS, FN, and RF models predicted the ROP for the training data with average absolute percentage errors (AAPEs) of 9.50%, 13.44%, and 3.25%, respectively. For the testing data, the ANFIS, FN, and RF models predicted the ROP with AAPEs of 9.57%, 11.20%, and 8.37%, respectively. The ANFIS, FN, and RF models overperformed the available empirical correlations for ROP prediction. The ANFIS model estimated the ROP for the validation data with an AAPE of 9.06%, whereas the FN model predicted the ROP with an AAPE of 10.48%, and the RF model predicted the ROP with an AAPE of 10.43%. The SVM model predicted the ROP for the validation data with a very high AAPE of 30.05% and all empirical correlations predicted the ROP with AAPEs greater than 25%.

Download Full-text

Application of Artificial Intelligence Techniques to Estimate the Static Poisson's Ratio Based on Wireline Log Data

Journal of Energy Resources Technology ◽

10.1115/1.4039613 ◽

2018 ◽

Vol 140 (7) ◽

Cited By ~ 16

Author(s):

Salaheldin Elkatatny

Keyword(s):

Artificial Intelligence ◽

Poisson’S Ratio ◽

Carbonate Reservoirs ◽

Poisson's Ratio ◽

Coefficient Of Determination ◽

Percentage Error ◽

Support Vector ◽

Cement Slurry ◽

Inference System ◽

Log Data

Static Poisson's ratio (νstatic) is a key factor in determine the in-situ stresses in the reservoir section. νstatic is used to calculate the minimum horizontal stress which will affect the design of the optimum mud widow and the density of cement slurry while drilling. In addition, it also affects the design of the casing setting depth. νstatic is very important for field development and the incorrect estimation of it may lead to heavy investment decisions. νstatic can be measured in the lab using a real reservoir cores. The laboratory measurements of νstatic will take long time and also will increase the overall cost. The goal of this study is to develop accurate models for predicting νstatic for carbonate reservoirs based on wireline log data using artificial intelligence (AI) techniques. More than 610 core and log data points from carbonate reservoirs were used to train and validate the AI models. The more accurate AI model will be used to generate a new correlation for calculating the νstatic. The developed artificial neural network (ANN) model yielded more accurate results for estimating νstatic based on log data; sonic travel times and bulk density compared to adaptive neuro fuzzy inference system (ANFIS) and support vector machine (SVM) methods. The developed empirical equation for νstatic gave a coefficient of determination (R2) of 0.97 and an average absolute percentage error (AAPE) of 1.13%. The developed technique will help geomechanical engineers to estimate a complete trend of νstatic without the need for coring and laboratory work and hence will reduce the overall cost of the well.

Download Full-text

Estimation and Optimization of Tool Wear in Conventional Turning of 709M40 Alloy Steel Using Support Vector Machine (SVM) with Bayesian Optimization

Materials ◽

10.3390/ma14143773 ◽

2021 ◽

Vol 14 (14) ◽

pp. 3773

Author(s):

Mahdi S. Alajmi ◽

Abdullah M. Almeshal

Keyword(s):

Artificial Intelligence ◽

Experimental Data ◽

Tool Wear ◽

Alloy Steel ◽

Bayesian Optimization ◽

Research Trend ◽

Support Vector ◽

Machining Parameters ◽

Svm Model ◽

Data Points

Cutting tool wear reduces the quality of the product in production processes. The optimization of both the machining parameters and tool life reliability is an increasing research trend to save manufacturing resources. In the present work, we introduced a computational approach in estimating the tool wear in the turning process using artificial intelligence. Support vector machines (SVM) for regression with Bayesian optimization is used to determine the tool wear based on various machining parameters. A coated insert carbide tool 2025 was utilized in turning tests of 709M40 alloy steel. Experimental data were collected for three machining parameters like feed rate, depth of cut, and cutting speed, while the parameter of tool wear was calculated with a scanning electron microscope (SEM). The SVM model was trained on 162 experimental data points and the trained model was then used to estimate the experimental testing data points to determine the model performance. The proposed SVM model with Bayesian optimization achieved a superior accuracy in estimation of the tool wear with a mean absolute percentage error (MAPE) of 6.13% and root mean square error (RMSE) of 2.29%. The results suggest the feasibility of adopting artificial intelligence methods in estimating the machining parameters to reduce the time and costs of manufacturing processes and contribute toward greater sustainability.

Download Full-text

Correlation between the structure and skin permeability of compounds

Scientific Reports ◽

10.1038/s41598-021-89587-5 ◽

2021 ◽

Vol 11 (1) ◽

Author(s):

Ruolan Zeng ◽

Jiyong Deng ◽

Limin Dang ◽

Xinliang Yu

Keyword(s):

Large Data ◽

Qsar Model ◽

Coefficient Of Determination ◽

Support Vector ◽

Skin Permeability ◽

Data Set ◽

Test Set ◽

Svm Algorithm ◽

Svm Model ◽

Toxicity Relationship

AbstractA three-descriptor quantitative structure–activity/toxicity relationship (QSAR/QSTR) model was developed for the skin permeability of a sufficiently large data set consisting of 274 compounds, by applying support vector machine (SVM) together with genetic algorithm. The optimal SVM model possesses the coefficient of determination R2 of 0.946 and root mean square (rms) error of 0.253 for the training set of 139 compounds; and a R2 of 0.872 and rms of 0.302 for the test set of 135 compounds. Compared with other models reported in the literature, our SVM model shows better statistical performance in a model that deals with more samples in the test set. Therefore, applying a SVM algorithm to develop a nonlinear QSAR model for skin permeability was achieved.

Download Full-text

Modelling response of infiltration loss toward water table depth using RBFN, RNN, ANFIS techniques

International Journal of Knowledge-based and Intelligent Engineering Systems ◽

10.3233/kes-210066 ◽

2021 ◽

Vol 25 (2) ◽

pp. 227-234

Author(s):

Sandeep Samantaray ◽

Abinash Sahoo

Keyword(s):

Neural Network ◽

Mean Square Error ◽

Water Table ◽

Environmental Sustainability ◽

Model Development ◽

Water Table Depth ◽

Water Levels ◽

Coefficient Of Determination ◽

Mean Square ◽

Inference System

Accurate prediction of water table depth over long-term in arid agricultural areas are very much important for maintaining environmental sustainability. Because of intricate and diverse hydrogeological features, boundary conditions, and human activities researchers face enormous difficulties for predicting water table depth. A virtual study on forecast of water table depth using various neural networks is employed in this paper. Hybrid neural network approach like Adaptive Neuro Fuzzy Inference System (ANFIS), Recurrent Neural Network (RNN), Radial Basis Function Neural Network (RBFN) is employed here to appraisal water levels as a function of average temperature, precipitation, humidity, evapotranspiration and infiltration loss data. Coefficient of determination (R2), Root mean square error (RMSE), and Mean square error (MSE) are used to evaluate performance of model development. While ANFIS algorithm is used, Gbell function gives best value of performance for model development. Whole outcomes establish that, ANFIS accomplishes finest as related to RNN and RBFN for predicting water table depth in watershed.

Download Full-text

Application of Artificial Intelligence (AI) for Sustainable Highway and Road System

Symmetry ◽

10.3390/sym13010060 ◽

2020 ◽

Vol 13 (1) ◽

pp. 60

Author(s):

Md Arifuzzaman ◽

Muhammad Aniq Gul ◽

Kaffayatullah Khan ◽

S. M. Zakir Hossain

Keyword(s):

Experimental Data ◽

High Performance ◽

Adhesion Force ◽

Model Development ◽

Real Life ◽

Bayesian Optimization ◽

Support Vector ◽

Adhesive Properties ◽

Bayesian Optimization Algorithm ◽

The Mean

There are several environmental factors such as temperature differential, moisture, oxidation, etc. that affect the extended life of the modified asphalt influencing its desired adhesive properties. Knowledge of the properties of asphalt adhesives can help to provide a more resilient and durable asphalt surface. In this study, a hybrid of Bayesian optimization algorithm and support vector regression approach is recommended to predict the adhesion force of asphalt. The effects of three important variables viz., conditions (fresh, wet and aged), binder types (base, 4% SB, 5% SB, 4% SBS and 5% SBS), and Carbon Nano Tube doses (0.5%, 1.0% and 1.5%) on adhesive force are taken into consideration. Real-life experimental data (405 specimens) are considered for model development. Using atomic force microscopy, the adhesive strength of nanoscales of test specimens is determined according to functional groups on the asphalt. It is found that the model predictions overlap with the experimental data with a high R2 of 90.5% and relative deviation are scattered around zero line. Besides, the mean, median and standard deviations of experimental and the predicted values are very close. In addition, the mean absolute Error, root mean square error and fractional bias values were found to be low, indicating the high performance of the developed model.

Download Full-text

Hybrid wavelet-support vector machine approach for modelling rainfall–runoff process

Water Science & Technology ◽

10.2166/wst.2016.048 ◽

2016 ◽

Vol 73 (8) ◽

pp. 1937-1953 ◽

Cited By ~ 9

Author(s):

Mehdi Komasi ◽

Soroush Sharghi

Keyword(s):

Time Series ◽

Support Vector Machine ◽

Fuzzy Inference ◽

The Other ◽

Support Vector ◽

Rainfall Runoff ◽

Model Concept ◽

Inference System ◽

Svm Model ◽

Artificial Intelligence Models

Because of the importance of water resources management, the need for accurate modeling of the rainfall–runoff process has rapidly grown in the past decades. Recently, the support vector machine (SVM) approach has been used by hydrologists for rainfall–runoff modeling and the other fields of hydrology. Similar to the other artificial intelligence models, such as artificial neural network (ANN) and adaptive neural fuzzy inference system, the SVM model is based on the autoregressive properties. In this paper, the wavelet analysis was linked to the SVM model concept for modeling the rainfall–runoff process of Aghchai and Eel River watersheds. In this way, the main time series of two variables, rainfall and runoff, were decomposed to multiple frequent time series by wavelet theory; then, these time series were imposed as input data on the SVM model in order to predict the runoff discharge one day ahead. The obtained results show that the wavelet SVM model can predict both short- and long-term runoff discharges by considering the seasonality effects. Also, the proposed hybrid model is relatively more appropriate than classical autoregressive ones such as ANN and SVM because it uses the multi-scale time series of rainfall and runoff data in the modeling process.

Download Full-text

Prediction of side weir discharge coefficient by support vector machine technique

Water Science & Technology Water Supply ◽

10.2166/ws.2016.014 ◽

2016 ◽

Vol 16 (4) ◽

pp. 1002-1016 ◽

Cited By ~ 43

Author(s):

Hazi Mohammad Azamathulla ◽

Amir Hamzeh Haghiabi ◽

Abbas Parsaie

Keyword(s):

Support Vector Machine ◽

Discharge Coefficient ◽

Sensitivity Analyses ◽

Coefficient Of Determination ◽

Support Vector ◽

Good Prediction ◽

Effective Parameters ◽

Side Weir ◽

Svm Model ◽

Soft Computing Techniques

Side weirs have many possible applications in the field of hydraulic engineering. They are also considered an important structure in hydro systems. In this study, the support vector machine (SVM) technique was employed to predict the side weir discharge coefficient. The performance of SVM was compared with other types of soft computing techniques such as artificial neural networks (ANN) and adaptive neuro fuzzy inference systems (ANFIS). While ANN and ANFIS models provided a good prediction performance, the SVM model with a radial basis function kernel function outperforms them. The best SVM model was developed with a gamma coefficient and epsilon of 15 and 0.3, respectively. The SVM yielded a coefficient of determination (R2) equal to 0.96 and 0.93 for the training and testing data. Sensitivity analyses of the ANN, ANFIS and SVM models showed that the Froude number and ratio of weir length to the flow depth upstream of the weir are the most effective parameters for the prediction of the discharge coefficient.

Download Full-text