scholarly journals Performance and microbial community in a combined VF-HF system for the advanced treatment of secondary effluent

2018 ◽  
Vol 2017 (3) ◽  
pp. 695-706 ◽  
Author(s):  
Zhichao Zhu ◽  
Hengfeng Miao ◽  
Yajing Zhang ◽  
Jian Cui ◽  
Zhenxing Huang ◽  
...  
Keyword(s):  
Nitrogen Removal ◽  
Constructed Wetland ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Community Analysis ◽  
Denitrifying Bacteria ◽  
Ammonium Nitrogen ◽  
Pollutant Removal ◽  
Stable Operation ◽  
Secondary Effluent

Abstract In this study, a laboratory-scale system combined a vertical flow constructed wetland (VF) with a horizontal flow constructed wetland (HF), which was used to treat the secondary effluent of a wastewater treatment plant. Removal efficiencies of 67.02%, 89.80%, 90.31% and 75.38% were achieved by the system for chemical oxygen demand (COD), ammonium nitrogen (NH4+-N), total nitrogen (TN) and total phosphorus (TP), respectively. The VF showed much higher average loading rates of COD, TP, NH4+-N and TN (7.96 g/m2/d, 0.076 g/m2/d, 0.31 g/m2/d and 0.99 g/m2/d) than in HF (0.65 g/m2/d, 0.016 g/m2/d, 0.25 g/m2/d and 0.50 g/m2/d), during the stable operation period. Biodegradation played a major role in pollutant removal, especially for COD and TN. The results of bacterial community analysis indicated that heterotrophic denitrifying bacteria (Hydrogenophaga and Flavobacterium) were the dominant contributors for nitrogen removal in the VF, while heterotrophic denitrifying bacteria (Rhodobacter, Flavobacterium and Dechloromonas) and the autotrophic denitrifying bacteria Sulfurimonas played the principal roles for nitrogen removal in the HF. Redundancy analyses showed that COD and NH4+-N were the important factors affecting the distribution of nitrogen removal bacteria in the VF, while pH, dissolved oxygen and oxidation-reduction potential were the key factors influencing the distribution of nitrogen removal bacteria in the HF.

scholarly journals In Situ Nutrient Removal from Rural Runoff by A New Type Aerobic/Anaerobic/Aerobic Water Spinach Wetlands

Water ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 1100 ◽  
Author(s):  
Ya-Wen Wang ◽  
Hua Li ◽  
You Wu ◽  
Yun Cai ◽  
Hai-Liang Song ◽  
...  
Keyword(s):  
Nitrogen Removal ◽  
Constructed Wetland ◽  
Removal Rate ◽  
Oxygen Demand ◽  
Ammonium Nitrogen ◽  
Water Spinach ◽  
Nitrogen And Phosphorus ◽  
The Matrix ◽  
New Type ◽  
Nitrification And Denitrification

Rural runoff with abundant nutrients has become a great threat to aquatic environment. Hence, more and more attention has been focused on nutrients removal. In this study, an improved aerobic/anaerobic/aerobic three-stage water spinach constructed wetland (O-A-O-CW) was used to improve the removal of nitrogen and phosphorus of rural runoff. The removal rate of the target pollutants in O-A-O-CW was compared with the common matrix flow wetland as well as the no-plant wetland. The results showed that the O-A-O-CW significantly increased the chemical oxygen demand, total phosphorus, ammonium-nitrogen, nitrate, and total nitrogen removal rate, and the corresponding removal rate was 55.85%, 81.70%, 76.64%, 89.78%, and 67.68%, respectively. Moreover, the best hydraulic condition of the wetland, including hydraulic retention time and hydraulic loading, was determined, which were 2 days and 0.45 m3·m−2·day−1, respectively. Furthermore, the removal mechanism of the constructed wetland was thoroughly studied, which included the adsorption of nitrogen and phosphorus by the matrix and water spinach, and the nitrification and denitrification by the bacteria. The results demonstrated that the mechanisms of nitrogen removal in the new type wetland were principally by the nitrification and denitrification process. Additionally, adsorption and precipitation by the matrix are mainly responsible for phosphorus removal. These results suggested that the new O-A-O-CW can efficiently removal nutrients and enhance the water quality of the rural runoff.

scholarly journals The Efficiency and Reliability of Pollutant Removal in a Hybrid Constructed Wetland with Common Reed, Manna Grass, and Virginia Mallow

Water ◽  
2018 ◽  
Vol 10 (10) ◽  
pp. 1445 ◽  
Author(s):  
Michał Marzec ◽  
Krzysztof Jóźwiakowski ◽  
Anna Dębska ◽  
Magdalena Gizińska-Górna ◽  
Aneta Pytka-Woszczyło ◽  
...  
Keyword(s):  
Total Nitrogen ◽  
Total Phosphorus ◽  
Constructed Wetland ◽  
Suspended Solids ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Total Suspended Solids ◽  
Common Reed ◽  
Pollutant Removal ◽  
Limit Values

In this paper, the pollutant removal efficiency and the reliability of a vertical and horizontal flow hybrid constructed wetland (CW) planted with common reed, manna grass, and Virginia mallow were analyzed. The wastewater treatment plant, located in south-eastern Poland, treated domestic sewage at an average flow rate of 2.5 m3/d. The tests were carried out during five years of its operation (2014–2018). The following parameters were measured: biochemical oxygen demand (BOD5), chemical oxygen demand (COD), total suspended solids, total nitrogen, and total phosphorus. The results showed that more than 95% of BOD5, COD, and total phosphorus was removed in the tested CW system. The average effectiveness of removal of total suspended solids and total nitrogen exceeded 86%. A reliability analysis performed using the Weibull probability model showed that the removal reliability in the tested CW was very high for BOD5, COD, total suspended solids, and total phosphorus (100%). The probability that the total nitrogen concentration in the treated effluents would reach the limit value (30 mg/L) established for effluents discharged from a treatment plant of less than 2000 PE (population equivalent) to standing waters was 94%. The values of all the pollution indicators in wastewater discharged to the receiver were significantly lower than the limit values required in Poland. The investigated hybrid CW system with common reed, manna grass, and Virginia mallow guaranteed stable low values of BOD5, COD, total suspended solids, and total phosphorus in the treated wastewater, which meant it was highly likely to be positively evaluated in case of an inspection.

scholarly journals Treatment of high-salt oil produced water based on constructed wetland technology—A case study of a costal oilfield

2021 ◽  
Vol 293 ◽  
pp. 03019
Author(s):  
Xiaoqing Cao ◽  
Xue Gao ◽  
Kai Zheng ◽  
Shan Wu ◽  
Guodong Meng ◽  
...  
Keyword(s):  
Constructed Wetland ◽  
Produced Water ◽  
Oxygen Demand ◽  
Ammonium Nitrogen ◽  
Oil Field ◽  
Stable Operation ◽  
Effluent Water ◽  
Good Ability ◽  
Operation Period

Aiming at the treatment of large volume of oil produced wastewater, the combined technology based on constructed wetland was applied for produced water treatment in a costal oil field. During the stable operation period, the treatment system maintained removal efficiency of 50.2% for chemical oxygen demand (COD), 100% for oil and 85.1% for ammonium nitrogen (NH3-N) under the gradient increase of salinity along the process. Meanwhile, this system has a good ability to adapt the influent fluctuation. When the oil in the influent fluctuated greatly between 11 mg/L to 147 mg/L, the effluent water quality remained stable. The treated water met the national discharge standard for water pollutants from the oilfield industry and can be used for the saline alkali beach wetland as supplement water.

Enhancing nitrogen removal efficiency in a dyestuff wastewater treatment plant with the IFFAS process: the pilot-scale and full-scale studies

2017 ◽  
Vol 77 (1) ◽  
pp. 70-78 ◽  
Author(s):  
Yanjun Mao ◽  
Xie Quan ◽  
Huimin Zhao ◽  
Yaobin Zhang ◽  
Shuo Chen ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Removal Efficiency ◽  
Nitrogen Removal ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Pilot Scale ◽  
Full Scale ◽  
Nitrification And Denitrification ◽  
Dyestuff Wastewater

Abstract The activated sludge (AS) process is widely applied in dyestuff wastewater treatment plants (WWTPs); however, the nitrogen removal efficiency is relatively low and the effluent does not meet the indirect discharge standards before being discharged into the industrial park's WWTP. Hence it is necessary to upgrade the WWTP with more advanced technologies. Moving bed biofilm processes with suspended carriers in an aerobic tank are promising methods due to enhanced nitrification and denitrification. Herein, a pilot-scale integrated free-floating biofilm and activated sludge (IFFAS) process was employed to investigate the feasibility of enhancing nitrogen removal efficiency at different hydraulic retention times (HRTs). The results showed that the effluent chemical oxygen demand (COD), ammonium nitrate (NH4+-N) and total nitrogen (TN) concentrations of the IFFAS process were significantly lower than those of the AS process, and could meet the indirect discharge standards. PCR-DGGE and FISH results indicated that more nitrifiers and denitrifiers co-existed in the IFFAS system, promoting simultaneous nitrification and denitrification. Based on the pilot results, the IFFAS process was used to upgrade the full-scale AS process, and the effluent COD, NH4+-N and TN of the IFFAS process were 91–291 mg/L, 10.6–28.7 mg/L and 18.9–48.6 mg/L, stably meeting the indirect discharge standards and demonstrating the advantages of IFFAS in dyestuff wastewater treatment.

scholarly journals Effects of selection and compiling strategy of substrates in column-type vertical-flow constructed wetlands on the treatment of synthetic landfill leachate containing bisphenol A

2021 ◽  
Author(s):  
Rajani Ghaju Shrestha ◽  
Daisuke Inoue ◽  
Michihiko Ike
Keyword(s):  
Activated Carbon ◽  
Bisphenol A ◽  
Landfill Leachate ◽  
Low Cost ◽  
Oxygen Demand ◽  
Ammonium Nitrogen ◽  
Pollutant Removal ◽  
Vertical Flow ◽  
Batch Mode ◽  
Synthetic Leachate

Abstract A constructed wetland (CW) is a low-cost, eco-friendly, easy-to-maintain, and widely applicable technology for treating various pollutants in the waste landfill leachate. This study determined the effects of the selection and compiling strategy of substrates used in CWs on the treatment performance of a synthetic leachate containing bisphenol A (BPA) as a representative recalcitrant pollutant. We operated five types of lab-scale vertical-flow CWs using only gravel (CW1), a sandwich of gravel with activated carbon (CW2) or brick crumbs (CW3), and two-stage hybrid CWs using gravel in one column and activated carbon (CW4) or brick crumbs (CW5) in another to treat synthetic leachate containing BPA in a 7-d sequential batch mode for 5 weeks. CWs using activated carbon (CW2 and CW4) effectively removed ammonium nitrogen (NH4-N) (99–100%), chemical oxygen demand (COD) (93–100%), and BPA (100%), indicating that the high adsorption capacity of activated carbon was the main mechanism involved in their removal. CW5 also exhibited higher pollutant removal efficiencies (NH4-N: 94–99%, COD: 89–98%, BPA: 89–100%) than single-column CWs (CW1 and CW3) (NH4-N: 76–100%, COD: 84–100%, BPA: 51–100%). This indicates the importance of the compiling strategy along with the selection of an appropriate substrate to improve the pollutant removal capability of CWs.

scholarly journals Enhanced Nitrogen Removal from Domestic Wastewater by Partial-Denitrification/Anammox in an Anoxic/Oxic Biofilm Reactor

Processes ◽  
2022 ◽  
Vol 10 (1) ◽  
pp. 109
Author(s):  
Yu Huang ◽  
Yongzhen Peng ◽  
Donghui Huang ◽  
Jiarui Fan ◽  
Rui Du
Keyword(s):  
Nitrogen Removal ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
Biofilm Reactor ◽  
Anammox Bacteria ◽  
Stable Operation ◽  
Ammonium Oxidation ◽  
N Accumulation ◽  
Carbon Demand ◽  
Oxidation Efficiency

A partial-denitrification coupling with anaerobic ammonium oxidation (anammox) process (PD/A) in a continuous-flow anoxic/oxic (A/O) biofilm reactor was developed to treat carbon-limited domestic wastewater (ammonia (NH4+-N) of 55 mg/L and chemical oxygen demand (COD) of 148 mg/L in average) for about 200 days operation. Satisfactory NH4+-N oxidation efficiency above 95% was achieved with rapid biofilm formation in the aerobic zone. Notably, nitrite (NO2−-N) accumulation was observed in the anoxic zone, mainly due to the insufficient electron donor for complete nitrate (NO3−-N) reduction. The nitrate-to-nitrite transformation ratio (NTR) achieved was as high as 64.4%. After the inoculation of anammox-enriched sludge to anoxic zones, total nitrogen (TN) removal was significantly improved from 37.3% to 78.0%. Anammox bacteria were effectively retained in anoxic biofilm utilizing NO2−-N produced via the PD approach and NH4+-N in domestic wastewater, with the relative abundance of 5.83% for stable operation. Anammox pathway contributed to TN removal by a high level of 38%. Overall, this study provided a promising method for mainstream nitrogen removal with low energy consumption and organic carbon demand.

scholarly journals Pollutant removal and growth dynamics of macrophyte species for faecal sludge treatment with constructed wetland technology

2019 ◽  
Vol 80 (6) ◽  
pp. 1145-1154
Author(s):  
Agyemang Richard Osei ◽  
Yacouba Konate ◽  
Felix Kofi Abagale
Keyword(s):  
Constructed Wetland ◽  
Growth Parameters ◽  
Oxygen Demand ◽  
Growth Dynamics ◽  
Pilot Scale ◽  
Pollutant Removal ◽  
Local Context ◽  
Organic Chemical ◽  
Bambusa Vulgaris ◽  
Faecal Sludge

Abstract Constructed wetland technology is an innovative engineering technique for faecal sludge (FS) management. The presence of emergent macrophytes enhances the important processes of evapotranspiration, sludge mineralisation, and contaminant reduction. Consequently, selecting a species that can withstand the difficult sludge contaminated conditions within a local context is vital. This study monitored the pollutant removal potentials and growth dynamics of Bambusa vulgaris and Cymbopogon nardus as promising macrophytes for the constructed wetland technology in the Sudano-Sahelian context. The experiment, at pilot scale, consisted of plastic reactors (27 litre) filled with filter media of sand and fine gravels at the base, and planted with the selected species. Pollutant removal efficiencies were evaluated based on differences between influent and effluent concentrations, and physiological growth parameters of plant height, number of leaves and number of plants were monitored monthly. Total annual sludge loading rate of 31.4 and 103.4 kg TS/(m2·yr) (TS: total solids) were determined for FS + wastewater (acclimatisation phase) and FS load respectively. Both species recorded appreciable pollutant removal efficiency >80% for the organic (chemical oxygen demand), nutrients (PO43_P and NH4-N) and solid (total suspended solids and total volatile solids) contents. The species thus demonstrated satisfactory performance of resistance for faecal polluted wetland conditions.

scholarly journals Novel advanced porous concrete in constructed wetlands: preparation, characterization and application in urban storm runoff treatment

2018 ◽  
Vol 78 (11) ◽  
pp. 2374-2382 ◽  
Author(s):  
Van Tai Tang ◽  
Kannan Pakshirajan
Keyword(s):  
Constructed Wetland ◽  
Oxygen Demand ◽  
Pollutant Removal ◽  
Storm Runoff ◽  
Storm Water ◽  
Water Runoff ◽  
Porous Concrete ◽  
Storm Water Runoff ◽  
Grass Growth ◽  
Urban Storm

Abstract Common porous concrete templates (CPCT) and advanced porous concrete templates (APCT) were employed in this study to construct wetlands for their applications in pollutant removal from storm runoff. The planting ability of the concrete was investigated by growing Festuca elata plants in them. Strength of the porous concrete (7.21 ± 0.19 Mpa) decreased by 1.8 and 4.9% over a period of six and 12 months, respectively, due to its immersion in lake water. The height and weight of Festuca elata grass growth on the porous concrete were observed to be 12.6–16.9 mm and 63.4–95.4 mg, respectively, after a duration of one month. Advanced porous concrete template based constructed wetland (APCT-CW) showed better removal of chemical oxygen demand (COD) (49.6%), total suspended solids (TSS) (58.9), NH3-N (52.4%), total nitrogen (TN) (47.7%) and total phosphorus (TP) (45.5%) in storm water, when compared with the common porous concrete template based constructed wetland (CPCT-CW) with 20.6, 29.8, 30.1, 35.4 and 26.9%, respectively. The removal of Pb, Ni, Zn by the CPCT-CW unit were 28.9, 33.3 and 42.3%, respectively, whereas these were 51.1, 62.5 and 53.8%, respectively, with the APCT-CW unit. These results demonstrate that the advanced porous concrete template in constructed wetland could be employed successfully for the removal of pollutants from urban storm water runoff.

Dielectric barrier discharge-based investigation and analysis of wastewater treatment and pollutant removal

2016 ◽  
Vol 73 (12) ◽  
pp. 2858-2867 ◽  
Author(s):  
N. Ramdani ◽  
A. Lousdad ◽  
A. Tilmatine ◽  
S. Nemmich
Keyword(s):  
Wastewater Treatment ◽  
Dielectric Barrier Discharge ◽  
Barrier Discharge ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Oxidation Potential ◽  
Pollutant Removal ◽  
High Rate ◽  
Wastewater Treatment Process ◽  
Dielectric Barrier

Abstract Current research reveals that the oxidation by ozone is considered as an effective solution and offers irrefutable advantages in wastewater treatment. It is also well known that ozone is used to treat different types of water due to its effectiveness in water purification and for its oxidation potential. This process of ozonation is becoming progressively an alternative technology and is inscribed in a sustainable development perspective in Algeria. In this regards, the present paper investigates the wastewater treatment process by ozone produced by dielectric barrier discharge (DBD) under high potential. Three (DBD) ozone generators of cylindrical form have been used, at a laboratory scale, for treating collected samples from the wastewater treatment plant (WWTP) of the city of Sidi-Bel-Abbes located in the west of Algeria. Our experimental results reveal the efficiency of this type of treatment on the basis of the physicochemical analysis (pH, turbidity, chemical oxygen demand, biological oxygen demand, heavy metals) and microbial analysis downstream of the WWTP, which showed a high rate of elimination of all the parameters.

scholarly journals Simultaneous nitrification and denitrification (SND) bioaugmentation with Pseudomonas sp. HJ3 inoculated for enhancing phenol and nitrogen removal in coal gasification wastewater

2019 ◽  
Vol 80 (8) ◽  
pp. 1512-1523
Author(s):  
Weiwei Ma ◽  
Yuxing Han ◽  
Wencheng Ma ◽  
Hongjun Han ◽  
Chunyan Xu ◽  
...  
Keyword(s):  
Removal Efficiency ◽  
Nitrogen Removal ◽  
Coal Gasification ◽  
Oxygen Demand ◽  
Community Analysis ◽  
Microbial Community Analysis ◽  
Simultaneous Nitrification And Denitrification ◽  
Pseudomonas Sp ◽  
Coal Gasification Wastewater ◽  
Nitrification And Denitrification

Abstract A simultaneous nitrification and denitrification (SND) bioaugmention system with Pseudomonas sp. HJ3 inoculated was established to explore the potential of simultaneous phenol and nitrogen removal in coal gasification wastewater (CGW). When the concentration of influent chemical oxygen demand (COD) and total phenols (TPh) was 1,765.94 ± 27.43 mg/L and 289.55 ± 10.32 mg/L, the average removal efficiency of COD and TPh at the stable operating stage reached 64.07% ± 0.76% and 74.91% ± 0.33%, respectively. Meanwhile, the average removal efficiency of NH4+-N and total nitrogen (TN) reached 67.96% ± 0.17% and 57.95% ± 0.12%, respectively. The maximum SND efficiency reached 83.51%. Furthermore, SND bioaugmentation performed with good nitrification tolerance of phenol shock load and significantly reduced toxic inhibition of organisms. Additionally, the microbial community analysis indicated that Pseudomonas sp. HJ3 was the predominant bacterium in the SND bioaugmentation system. Moreover, the indigenous nitrogen removal bacteria such as Thauera, Acidovorax and Stenotrophomonas were enriched, which further enhanced the nitrogen removal in the SND bioaugmentation system. The results demonstrated the promising application of SND bioaugmentation for enhancing simultaneous phenol and nitrogen removal in CGW treatment.

Sign in / Sign up

Export Citation Format

Share Document