CDI Cross-linked Nanosponges of Citronella Oil for Controlled Mosquito-repellent Activity

2020 ◽  
Vol 5 (3) ◽  
pp. 214-223
Author(s):  
Pooja Dubey ◽  
Pravin Shende
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
In Vitro Release ◽  
Repellent Activity ◽  
Mosquito Repellent ◽  
Topical Formulation ◽  
Dsc Studies ◽  
Citronella Oil ◽  
Temperature Method

Objectives: Citronella oil is considered one of the effective mosquito- repellent oil and in cooperation of oil into nanosponges will help to prevent its evaporation and enhance its effect. Objective: The objective of the current research was to formulate and characterize CDI cross-linked nanosponges of citronella oil for controlled mosquito-repellent activity. Method: β-cyclodextrin-based nanosponges were prepared by polymer condensation method and encapsulated with citronella oil by the sonication method. A topical cream containing citronella oil-based nanosponges was formulated by the phase inversion temperature method. Particle size, zeta potential, encapsulation efficiency, stability, in vitro release, FTIR and DSC studies were used as characterization parameters. Results: The particle size of citronella oil encapsulated β-cyclodextrin-based nanosponges was 23.05±3.88 nm. The zeta potential of nanosponges was sufficiently high to prevent aggregation. In vitro studies revealed the controlled release of citronella oil from the nanosponges for 24 h. FTIR and DSC confirmed the interaction of the citronella oil with the nanosponges. Conclusion: Citronella oil encapsulated nanosponges in the topical formulation is an alternative to synthetic marketed creams for controlled mosquito-repellent activity.

scholarly journals Formulation and Evaluation of Nanoemulsion using Tazarotene and Curcumin

2021 ◽  
pp. 807-815
Author(s):  
Parmita Phaugat ◽  
Suchitra Nishal ◽  
Aparna Khansili
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Ternary Phase Diagram ◽  
In Vitro Release ◽  
Tween 80 ◽  
High Energy ◽  
Oral Route ◽  
Topical Formulation ◽  
Vitro Release

Aims: To formulate and evaluate nanoemulsion of Tazarotene and Curcumin Study Design: Ultrsonication Methods. Place and Duration of Study, Sample: Swami Dayanand Postgraduate Institute of Pharmaceuticals Sciences, University of Health Sciences, Rohtak; 2020-2021 Methodology: Oleic acid, tween 80, and propylene glycol were selected as oil, surfactant, and co-surfactant, respectively. The ratio of oil: surfactant: co-surfactant was selected based on a ternary phase diagram using the aqueous titration method. The selected ratio was employed to develop eight formulations of Tazarotene-curcumin by ultra-sonication. The formulations (F1-F8) were characterized using several physicochemical methods like pH, viscosity, particle size distribution, zeta potential, drug content, and in vitro release. The optimized formulation was selected based on the results of characterization. Results: The formulations (F1-F8) were formulated by using the ultrasonication (high energy) method. The optimized formulation possessed particle size 121, 0.382 PDI, and -20.1 zeta potential. The in vitro release of F6 was found to be 90.9 ± 3.1 at 24 hours. It also passed the thermodynamic stability tests. Conclusion: The current investigations conclude that Tazarotene-curcumin nanoemulsion can be used as an alternative to the oral route of tazarotene and is also useful in reducing the adverse effects associated with oral. The physicochemical evaluation of the formulation showed that the nanoemulsion had the necessary properties for a topical formulation.

Optimization and Characterization of Aqueous Micellar Formulations for Ocular Delivery of an Antifungal Drug, Posaconazole

2020 ◽  
Vol 26 (14) ◽  
pp. 1543-1555 ◽  
Author(s):  
Meltem E. Durgun ◽  
Emine Kahraman ◽  
Sevgi Güngör ◽  
Yıldız Özsoy
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Size Distribution ◽  
Encapsulation Efficiency ◽  
Fungal Infections ◽  
In Vitro Release ◽  
Pluronic F127 ◽  
Glycol Succinate ◽  
Vitro Release

Background: Topical therapy is preferred for the management of ocular fungal infections due to its superiorities which include overcoming potential systemic side effects risk of drugs, and targeting of drugs to the site of disease. However, the optimization of effective ocular formulations has always been a major challenge due to restrictions of ocular barriers and physiological conditions. Posaconazole, an antifungal and highly lipophilic agent with broad-spectrum, has been used topically as off-label in the treatment of ocular fungal infections due to its highly lipophilic character. Micellar carriers have the potential to improve the solubility of lipophilic drugs and, overcome ocular barriers. Objective: In the current study, it was aimed optimization of posaconazole loaded micellar formulations to improve aqueous solubility of posaconazole and to characterize the formulations and to investigate the physical stability of these formulations at room temperature (25°C, 60% RH), and accelerated stability (40°C, 75% RH) conditions. Method: Micelles were prepared using a thin-film hydration method. Pre-formulation studies were firstly performed to optimize polymer/surfactant type and to determine their concentration in the formulations. Then, particle size, size distribution, and zeta potential of the micellar formulations were measured by ZetaSizer Nano-ZS. The drug encapsulation efficiency of the micelles was quantified by HPLC. The morphology of the micelles was depicted by AFM. The stability of optimized micelles was evaluated in terms of particle size, size distribution, zeta potential, drug amount and pH for 180 days. In vitro release studies were performed using Franz diffusion cells. Results: Pre-formulation studies indicated that single D-ɑ-tocopheryl polyethylene glycol succinate (TPGS), a combination of it and Pluronic F127/Pluronic F68 are capable of formation of posaconazole loaded micelles at specific concentrations. Optimized micelles with high encapsulation efficiency were less than 20 nm, approximately neutral, stable, and in aspherical shape. Additionally, in vitro release data showed that the release of posaconazole from the micelles was higher than that of suspension. Conclusion: The results revealed that the optimized micellar formulation of posaconazole offers a potential approach for topical ocular administration.

scholarly journals pH-Responsive Liposomes of Dioleoyl Phosphatidylethanolamine and Cholesteryl Hemisuccinate for the Enhanced Anticancer Efficacy of Cisplatin

Pharmaceutics ◽  
2022 ◽  
Vol 14 (1) ◽  
pp. 129
Author(s):  
Hassan Shah ◽  
Asadullah Madni ◽  
Muhammad Muzamil Khan ◽  
Fiaz-ud-Din Ahmad ◽  
Nasrullah Jan ◽  
...  
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Release Rate ◽  
In Vitro Release ◽  
Chemotherapeutic Agents ◽  
Ph Responsive ◽  
Scanning Calorimetry ◽  
Cholesteryl Hemisuccinate ◽  
Vitro Release

The current study aimed to develop pH-responsive cisplatin-loaded liposomes (CDDP@PLs) via the thin film hydration method. Formulations with varied ratios of dioleoyl phosphatidylethanolamine (DOPE) to cholesteryl hemisuccinate (CHEMS) were investigated to obtain the optimal particle size, zeta potential, entrapment efficiency, in vitro release profile, and stability. The particle size of the CDDP@PLs was in the range of 153.2 ± 3.08–206.4 ± 2.26 nm, zeta potential was −17.8 ± 1.26 to −24.6 ± 1.72, and PDI displayed an acceptable size distribution. Transmission electron microscopy revealed a spherical shape with ~200 nm size. Fourier transform infrared spectroscopic analysis showed the physicochemical stability of CDDP@PLs, and differential scanning calorimetry analysis showed the loss of the crystalline nature of cisplatin in liposomes. In vitro release study of CDDP@PLs at pH 7.4 depicted the lower release rate of cisplatin (less than 40%), and at a pH of 6.5, an almost 65% release rate was achieved compared to the release rate at pH 5.5 (more than 80%) showing the tumor-specific drug release. The cytotoxicity study showed the improved cytotoxicity of CDDP@PLs compared to cisplatin solution in MDA-MB-231 and SK-OV-3 cell lines, and fluorescence microscopy also showed enhanced cellular internalization. The acute toxicity study showed the safety and biocompatibility of the developed carrier system for the potential delivery of chemotherapeutic agents. These studies suggest that CDDP@PLs could be utilized as an efficient delivery system for the enhancement of therapeutic efficacy and to minimize the side effects of chemotherapy by releasing cisplatin at the tumor site.

scholarly journals FORMULATION OF POLYMERIC NANOSUSPENSION CONTAINING PRAMIPEXOLE DIHYDROCHLORIDE AND HESPERIDIN FOR IMPROVED TREATMENT OF PARKINSON’S DISEASES

2018 ◽  
Vol 11 ◽  
Author(s):  
Somasundaram I
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Burst Release ◽  
Drug Content ◽  
Pramipexole Dihydrochloride ◽  
Vitro Release

Aims and Objectives: The present study is to formulate the nanosuspension containing a hydrophilic drug pramipexole dihydrochloride and hesperidin and to increase the drug entrapment efficiency.Methods: Hesperidin and pramipexole dihydrochloride loaded in chitosan nanosuspension is prepared by ionic gelation method using chitosan and tripolyphosphate. There was no incompatibility observed between the drug and polymer through Fourier transform infrared and differential scanning calorimetric. Various other parameters such as particle size, zeta potential, scanning electron microscope, drug content, drug entrapment efficiency, and in vitro release have been utilized for the characterization of nanoparticles.Results and Discussion: The average size of particle is 188 nm; zeta potential is 46.7 mV; drug content of 0.364±0.25 mg/ml; entrapment efficiency of 72.8% is obtained with HPN3 formulation. The PHC1 shows the highest drug release followed by PHC2 due to low concentration of polymer and PHC4 and PHC5 show less drug release due to high concentration of polymer. The in vitro release of PHC3 is 85.2%, initial the burst release is shown which is approximately 60% in 8 h; then, slow release later on drastic reduction in release rate is shown in 24 h. The in vivo study histopathological report confers the effective protective against rotenone induces Parkinson’s.Conclusion: PHC3 was chosen as the best formulation due to its reduced particle size and controlled release at optimum polymer concentration which may be used to treat Parkinson’s disease effectively..

scholarly journals A Novel Sustained Anti-Inflammatory Effect of Atorvastatin—Calcium PLGA Nanoparticles: In Vitro Optimization and In Vivo Evaluation

Pharmaceutics ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1658
Author(s):  
Dalia H. Abdelkader ◽  
Ahmed Kh. Abosalha ◽  
Mohamed A. Khattab ◽  
Basmah N. Aldosari ◽  
Alanood S. Almurshedi
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
In Vitro Release ◽  
In Vivo Evaluation ◽  
Water Emulsion ◽  
Atorvastatin Calcium ◽  
Anti Inflammatory ◽  
Inflammatory Effect

Atorvastatin Calcium (At-Ca) has pleiotropic effect as anti-inflammatory drug beside its main antihyperlipidemic action. Our study was conducted to modulate the anti-inflammatory effect of At-Ca to be efficiently sustained for longer time. Single oil-water emulsion solvent evaporation technique was used to fabricate At-Ca into polymeric nanoparticles (NPs). In vitro optimization survey was performed on Poly(lactide-co-glycolide) (PLGA) loaded with At-Ca regrading to particle size, polydispersity index (PDI), zeta potential, percent entrapment efficiency (% EE), surface morphology and in vitro release pattern. In vitro drug-polymers interactions were fully scanned using Fourier-Transform Infrared Spectroscopy (FTIR) and Differential Scanning calorimetry (DSC) proving that the method of fabrication is an optimal strategy maintaining the drug structure with no interaction with polymeric matrix. The optimized formula with particle size (248.2 ± 15.13 nm), PDI (0.126 ± 0.048), zeta potential (−12.41 ± 4.80 mV), % EE (87.63 ± 3.21%), initial burst (39.78 ± 6.74%) and percent cumulative release (83.63 ± 3.71%) was orally administered in Male Sprague–Dawley rats to study the sustained anti-inflammatory effect of At-Ca PLGA NPs after carrageenan induced inflammation. In vivo results demonstrate that AT-Ca NPs has a sustained effect extending for approximately three days. Additionally, the histological examination revealed that the epidermal/dermal layers restore their typical normal cellular alignment with healthy architecture.

scholarly journals An Innovative Formulation Based on Nanostructured Lipid Carriers for Imatinib Delivery: Pre-Formulation, Cellular Uptake and Cytotoxicity Studies

Nanomaterials ◽  
2022 ◽  
Vol 12 (2) ◽  
pp. 250
Author(s):  
Evren Gundogdu ◽  
Emine-Selin Demir ◽  
Meliha Ekinci ◽  
Emre Ozgenc ◽  
Derya Ilem-Ozdemir ◽  
...  
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Cellular Uptake ◽  
Enzyme Inhibitor ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Nanostructured Lipid Carrier ◽  
Loading Capacity ◽  
Cytotoxicity Studies

Imatinib (IMT) is a tyrosine kinase enzyme inhibitor and extensively used for the treatment of gastrointestinal stromal tumors (GISTs). A nanostructured lipid carrier system (NLCS) containing IMT was developed by using emulsification–sonication methods. The characterization of the developed formulation was performed in terms of its particle size, polydispersity index (PDI), zeta potential, entrapment efficiency, loading capacity, sterility, syringeability, stability, in vitro release kinetics with mathematical models, cellular uptake studies with flow cytometry, fluorescence microscopy and cytotoxicity for CRL-1739 cells. The particle size, PDI, loading capacity and zeta potential of selected NLCS (F16-IMT) were found to be 96.63 ± 1.87 nm, 0.27 ± 0.15, 96.49 ± 1.46% and −32.7 ± 2.48 mV, respectively. F16-IMT was found to be stable, thermodynamic, sterile and syringeable through an 18 gauze needle. The formulation revealed a Korsmeyer–Peppas drug release model of 53% at 8 h, above 90% of cell viability, 23.61 µM of IC50 and induction of apoptosis in CRL-1739 cell lines. In the future, F16-IMT can be employed to treat GISTs. A small amount of IMT loaded into the NLCSs will be better than IMT alone for therapy for GISTs. Consequently, F16-IMT could prove to be useful for effective GIST treatment.

ROSUVASTATIN CALCIUM LOADED CHITOSAN NANOPARTICLES: PREPARATION EVALUATION AND IN VITRO RELEASE STUDIES

2020 ◽  
pp. 95-102
Author(s):  
SUVARNA G. BHOKARE ◽  
RAJENDRA P. MARATHE
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Sustained Release ◽  
Sodium Tripolyphosphate ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Particle Diameter ◽  
Vitro Release ◽  
Rosuvastatin Calcium

Objective: The objective of the present study was to develop sustained release biodegradable polymeric nanoparticles of rosuvastatin calcium. Methods: Nanoparticles were prepared by modified ionotropic gelation method using 3² full factorial designs. From the preliminary trials, the constraints for independent variables X1 (concentration. of chitosan) and X2 (concentration. of sodium tripolyphosphate) have been fixed. Factors included concentration of chitosan and sodium tripolyphosphate, have been examined to investigate effect on particle size, encapsulation efficiency, zeta potential, % release, scanning electron microscopy, Fourier transfer infrared study and X-ray diffraction and release study of rosuvastatin calcium nanoparticles. 0 Results: The prepared nanoparticles were white, free-flowing and spherical in shape. The infrared spectra showed stable character of rosuvastatin calcium in the drug-loaded nanoparticles and revealed the absence of drug polymer interactions. The chitosan nanoparticles have a particle diameter ranging approximately 114.5±3.61 to 724±.2.51 nm and a zeta potential-13.12 to-52.63 mV. The in vitro release behavior from all the drug loaded batches were found to follow first order and provided sustained release over a period of 10 h. The Zeta potential of all the batches were in the range of-13.12 to-52.63 mv. The release profiles of all batches were very well fitted by Korsmeyer Peppas model. Conclusion: The best-fit release kinetics was achieved with Korsmeyer peppas model. The release of rosuvastatin calcium was influenced by the drug to polymer ratio and particle size. These results indicate that rosuvastatin calcium nanoparticles could be effective in sustaining drug release for a prolonged period.

Formulation and evaluation of resveratrol loaded cubosomal nanoformulation for topical delivery

2020 ◽  
Vol 17 ◽  
Author(s):  
Bhaskar Kurangi ◽  
Sunil Jalalpure ◽  
Satveer Jagwani
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Topical Application ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Drug Permeation

Aim: The aim of the study was to formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC) through topical application. Background: Resveratrol (RV) is a nutraceutical compound that has exciting pharmacological potential in different diseases including cancers. Many studies of resveratrol have been reported for anti-melanoma activity. Due to its low bioavailability, the activities of resveratrol are strongly limited. Hence, an approach with nanotechnology has been done to increase its activity through transdermal drug delivery. Objective: To formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC). To evaluate resveratrol-loaded cubosomal gel (RC-Gel) for its topical application. Methods: RC was formulated by homogenization technique and optimized using a 2-factor 3-level factorial design. Formulated RCs were characterized for particle size, zeta potential, and entrapment efficiency. Optimized RC was evaluated for in vitro release and stability study. Optimized RC was further formulated into cubosomal gel (RC-Gel) using carbopol and evaluated for drug permeation and deposition. Furthermore, developed RC-Gel was evaluated for its topical application using skin irritancy, toxicity, and in vivo local bioavailability studies. Results: The optimized RC indicated cubic-shaped structure with mean particle size, entrapment efficiency, and zeta potential were 113±2.36 nm, 85.07 ± 0.91%, and -27.40 ± 1.40 mV respectively. In vitro drug release of optimized RC demonstrated biphasic drug release with the diffusion-controlled release of resveratrol (RV) (87.20 ± 2.25%). The RC-Gel demonstrated better drug permeation and deposition in mice skin layers. The composition of RC-Gel has been proved non-irritant to the mice skin. In vivo local bioavailability study depicted the good potential of RC-Gel for skin localization. Conclusion: The RC nanoformulation proposes a promising drug delivery system for melanoma treatment simply through topical application.

scholarly journals OPTIMIZATION AND CHARACTERIZATION OF DOXORUBICIN LOADED SOLID LIPID NANOSUSPENSION FOR NOSE TO BRAIN DELIVERY USING DESIGN EXPERT SOFTWARE

2021 ◽  
pp. 45-57
Author(s):  
VIRAG A. SHAH ◽  
JAYVADAN K. PATEL
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Zeta Potential ◽  
High Speed ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Brain Targeting ◽  
Solid Lipid ◽  
Stirring Time

Objective: The goal of the current study was to investigate the possible use of solid lipid nanosuspension (SLNs) as a drug delivery method to boost doxorubicin (DOX) brain-targeting performance after intranasal (i. n.) administration.  Methods: 33 factorial design was applied for optimization by using lipid concentration, surfactant concentration, and High-speed homogenizer (HSH) stirring time as dependent variables, and their effect was observed on particles size, Polydispersity index (PDI), and entrapment efficiency.  Results: With the composition of Compritol® 888 ATO (4.6 % w/v), tween 80 (1.9 % w/v), and HSH stirring time, the optimized formula DOX-SLNs prepared (10 min). Particle size, PDI, zeta potential, entrapment efficiency, percent in vitro release were found to be 167.47±6.09 nm, 0.23±0.02, 24.1 mV, 75.3±2.79, and 89.35±3.27 percent in 24 h, respectively, for optimized formulation (V-O). No major changes in particle size, zeta potential, and entrapping efficiency were found in the stability studies at 4±2 °C (refrigerator) and 25±2 °C/60±5% RH up to 3 mo.  Conclusion: Following the non-invasive nose-to-brain drug delivery, which is a promising therapeutic strategy, the positive findings confirmed the current optimized DOX-loaded SLNs formulation.

Zingiber officinale essential oil-loaded chitosan-tripolyphosphate nanoparticles: Fabrication, characterization and in-vitro antioxidant and antibacterial activities

2021 ◽  
pp. 108201322110409
Author(s):  
Mojtaba Yousefi ◽  
Vahid Ghasemzadeh Mohammadi ◽  
Mahdi Shadnoush ◽  
Nasim Khorshidian ◽  
Amir M. Mortazavian
Keyword(s):  
Particle Size ◽  
Essential Oil ◽  
Zeta Potential ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Zingiber Officinale ◽  
Resistant Bacteria ◽  
Scanning Electron Micrographs ◽  
Inhibition Zones

Zingiber officinale essential oil (ZEO) was encapsulated in chitosan nanoparticles at different concentrations using the emulsion-ionic gelation technique and its antioxidant and antibacterial effects were investigated. The results indicated that ZEO level had a significant effect on encapsulation efficiency (EE), loading capacity (LC), particle size and zeta potential. The value obtained for EE, LC, mean particle size and zeta potential were 49.11%–68.32%, 21.16%–27.54%, 198.13–318.26 nm and +21.31–43.57 mV, respectively. According to scanning electron micrographs, the nanoparticles had a spherical shape with some invaginations due to the drying process. The presence of essential oil within the chitosan nanoparticles was confirmed by Fourier transform infrared (FTIR) spectroscopy. In vitro release studies in simulated gastrointestinal fluid (SGF) and simulated intestinal fluid (SIF) indicated an initial burst effect followed by slow release with higher release rate in acidic medium of SGF. ZEO-loaded nanoparticles showed DPPH radical scavenging activity of 20%–61% which increased by raising the ZEO level. Moreover, results of antibacterial activity revealed that Staphylococcus aureus (with inhibition zones of 19–35.19 mm2) and Salmonella typhimurium (with inhibition zones of 9.78–17.48 mm2) were the most sensitive and resistant bacteria to ZEO, respectively. Overall, chitosan nanoparticles can be considered as suitable vehicles for ZEO and improve its stability and solubility.

Sign in / Sign up

Export Citation Format

Share Document