scholarly journals Determination of fracture toughness and elastic module in materials based silicon nitride

2019 ◽  
Vol 20 (4) ◽  
pp. 1-13
Author(s):  
Edwuin Jesus Carrasquero Rodriguez ◽  
Jaime Moises Minchala Marquino ◽  
Byron Ramiro Romero Romero ◽  
Luis Marcelo Lopez Lopez ◽  
Jorge Isaac Fajardo Seminario
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Rare Earth ◽  
Silicon Nitride ◽  
High Strength ◽  
Mechanical Resistance ◽  
Elastic Module ◽  
Structural Applications ◽  
The Matrix ◽  
Materials Used

The knowledge of the mechanical properties of any material subjected to loads is necessary for its use in structural applications. Silicon nitride (Si3N4) ceramics are well-known materials used in engineering applications due to their outstanding combination of high strength and fracture toughness. The most studied mechanical properties of Si3N4 are hardness, fracture toughness and mechanical resistance. Recent advances in the production processes that incorporate high purity rare earth elements as sintering additives have improved these mechanical properties. Using Vickers indentation method, the elastic module and fracture toughness of Si3N4 based materials modified with La2O3, Y2O3 and Al2O3 were determined as a function of the cracking system type that prevails under the effect of load. The results indicate that adding rare earth to the matrix increased the fracture toughness the Si3N4 base ceramic Samples containing La2O3+Y2O3 showed higher values of fracture toughness than the ones with Al2O3+La2O3, regardless of the equation used in the calculations. Meanwhile the elastic module decrease approximately 100 GPa for both types of nitrides by the effect of the temperature.

Effect of β–Si3N4 seed crystal on the microstructure and mechanical properties of sintered reaction-bonded silicon nitride

1999 ◽  
Vol 14 (1) ◽  
pp. 178-184 ◽  
Author(s):  
Soo Young Lee ◽  
K. Amoako-Appiagyei ◽  
Hai Doo Kim
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Silicon Nitride ◽  
High Strength ◽  
Considerable Improvement ◽  
Seed Crystal ◽  
Bimodal Microstructure ◽  
Seed Crystals ◽  
Before And After ◽  
Gas Pressure Sintering

β–Si3N4 seed crystal has been synthesized from α–Si3N4 powder. Reaction-bonded Si3N4/SiC composite has been fabricated with β–Si3N4 seed crystals. The nitridation behavior and the changes in mechanical properties resulting from the addition of seed crystals were studied before and after gas pressure sintering. Addition of seeds showed a considerable improvement in the nitridation, resulting in increase in fracture strength of the composite. Highly nitrided reaction-bonded Si3N4 (RBSN) as a result of the addition of seed crystals gave rise to high strength of composite after postsintering. Fracture toughness of the seeded Si3N4 was also improved up to 35% compared to the baseline Si3N4. Micrographs showed that the seeded Si3N4 developed a bimodal microstructure which resulted in an improvement in fracture toughness.

scholarly journals Characterization of rare-earth doped Si3N4/SiC micro/nanocomposites

2010 ◽  
Vol 4 (1) ◽  
pp. 25-32 ◽  
Author(s):  
Peter Tatarko ◽  
Stefánia Lojanová ◽  
Ján Dusza ◽  
Pavol Sajgalík
Keyword(s):  
Fracture Toughness ◽  
Rare Earth ◽  
Silicon Nitride ◽  
Rare Earth Elements ◽  
Ionic Radius ◽  
Bending Strength ◽  
Rare Earth Oxide ◽  
Positive Influence ◽  
The Matrix

Influence of various rare-earth oxide additives (La2O3, Nd2O3, Sm2O3, Y2O3, Yb2O3 and Lu2O3) on the mechanical properties of hot-pressed silicon nitride and silicon nitride/silicon carbide micro/nano-composites has been investigated. The bimodal character of microstructures was observed in all studied materials where elongated ?-Si3N4 grains were embedded in the matrix of much finer Si3N4 grains. The fracture toughness values increased with decreasing ionic radius of rare-earth elements. The fracture toughness of composites was always lower than that of monoliths due to their finer Si3N4/SiC microstructures. Similarly, the hardness and bending strength values increased with decreasing ionic radius of rare-earth elements either in monoliths or composites. On the other hand, the positive influence of finer microstructure of the composites on strength was not observed due to the present defects in the form of SiC clusters and non-reacted carbon zones. Wear resistance at room temperature also increased with decreasing ionic radius of rare-earth element. Significantly improved creep resistance was observed in case either of composite materials or materials with smaller radius of RE3+. .

Effects of Rare-Earth Oxides Doping on Microstructures and Properties of Al2O3/TiAl Composites

2011 ◽  
Vol 675-677 ◽  
pp. 143-146
Author(s):  
Fen Wang ◽  
Xiao Feng Wang ◽  
Jian Feng Zhu ◽  
Liu Yi Xiang
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Rare Earth ◽  
Flexural Strength ◽  
Rare Earth Oxide ◽  
Rare Earth Oxides ◽  
Oxide Content ◽  
The Matrix ◽  
Al2o3 Particles ◽  
Positive Effect

Effects of rare-earth oxides addition (0.38~1.52 mol% of Sm2O3, Eu2O3 and Er2O3) on the property and microstructure of the hot-pressed (1300°C, 2h, 35 MPa) Al2O3 (12 wt %)/TiAl insitu composites have been investigated. The results show that the doping of rare-earth oxides has a positive effect on both mechanical properties and densities of Al2O3/TiAl composites. Densities enhanced with increasing of rare-earth oxides. The flexural strength and fracture toughness were higher than other samples when the rare-earth oxide content was 0.38 mol %. The matrix grains and Al2O3 particles were significantly refined, and Al2O3 particles evenly distributed in the matrix.

Lattice Imaging of Grain Boundaries in Ceramics

1977 ◽  
Vol 35 ◽  
pp. 114-115
Author(s):  
D. R. Clarke ◽  
G. Thomas
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Silicon Nitride ◽  
Grain Boundaries ◽  
High Temperature Strength ◽  
Current Interest ◽  
Lattice Imaging ◽  
Special Significance ◽  
Structural Applications ◽  
Refractory Ceramics

Grain boundaries have long held a special significance to ceramicists. In part, this has been because it has been impossible until now to actually observe the boundaries themselves. Just as important, however, is the fact that the grain boundaries and their environs have a determing influence on both the mechanisms by which powder compaction occurs during fabrication, and on the overall mechanical properties of the material. One area where the grain boundary plays a particularly important role is in the high temperature strength of hot-pressed ceramics. This is a subject of current interest as extensive efforts are being made to develop ceramics, such as silicon nitride alloys, for high temperature structural applications. In this presentation we describe how the techniques of lattice fringe imaging have made it possible to study the grain boundaries in a number of refractory ceramics, and illustrate some of the findings.

CARLSON ALLOY C600 and C600 ESR

Alloy Digest ◽  
1994 ◽  
Vol 43 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Solid Solution ◽  
Fracture Toughness ◽  
Cold Working ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Solid Solution Alloy ◽  
Resistance To Oxidation ◽  
Good Workability

Abstract CARLSON ALLOYS C600 AND C600 ESR have excellent mechanical properties from sub-zero to elevated temperatures with excellent resistance to oxidation at high temperatures. It is a solid-solution alloy that can be hardened only by cold working. High strength at temperature is combined with good workability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Ni-470. Producer or source: G.O. Carlson Inc.

UNS A97075

Alloy Digest ◽  
1986 ◽  
Vol 35 (7) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Aluminum Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Good Resistance ◽  
Temperature Performance ◽  
Structural Applications ◽  
Structural Parts ◽  
Very High

Abstract UNS No. A97075 is a wrought precipitation-hardenable aluminum alloy. It has excellent mechanical properties, workability and response to heat treatment and refrigeration. Its typical uses comprise aircraft structural parts and other highly stressed structural applications where very high strength and good resistance to corrosion are required. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low temperature performance as well as forming, heat treating, and machining. Filing Code: Al-269. Producer or source: Various aluminum companies.

FERRIUM M54

Alloy Digest ◽  
2018 ◽  
Vol 67 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
High Resistance ◽  
High Strength ◽  
Cost Effective ◽  
High Fracture Toughness ◽  
High Fracture ◽  
Structural Applications ◽  
Resistance To Stress

Abstract Ferrium M54 was designed to create a cost-effective, ultra high-strength, high-fracture toughness material with a high resistance to stress-corrosion cracking for use in structural applications. This datasheet provides information on composition, hardness, and tensile properties as well asfatigue. Filing Code: SA-822. Producer or source: QuesTek Innovations, LLC.

Crystallization behavior, Al-Ce intermetallic formation, and microstructure refinement of near-eutectic Al–Si alloys by rare-earth element additions

2020 ◽  
Vol 111 (11) ◽  
pp. 938-952
Author(s):  
Bo Chi ◽  
Zhiming Shi ◽  
Cunquan Wang ◽  
Liming Wang ◽  
Hao Lian ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Rare Earth ◽  
Rare Earth Element ◽  
Crystallization Behavior ◽  
Earth Element ◽  
Microstructural Refinement ◽  
Preferential Growth ◽  
Intermetallic Formation ◽  
The Matrix

Abstract Near-eutectic Al-Si alloys have low strength and high brittleness because of the presence of many eutectic b-Si flakes, needle-like Al-Fe-Si intermetallics, and coarse α-Al grains. This study disclosed the effects of cerium-rich RE (rare earth) element modification on orientation characters of crystals, formation of Al-Ce compounds, and microstructural refinement to improve the microstructure and mechanical properties of the alloys. The RE addition depressed preferential growth along the close-packed and/or sub-closepacked planes and promoted growth along the non-closepacked planes, in which La and other elements were dissolved into needle-like Al11Ce3 phase. When the temperature decreased, Al11Ce3 was preferentially crystallized from the melts and then devitrified by attaching to the surface of β-Al5FeSi needles. Moreover, many small Al11Ce3 particles were precipitated in the matrix and on the Si surface by a T6 heat treatment. Eutectic β-Si phases were constructed into discontinuous networks, short rods, and even particles by RE additions, which were further transformed into fine nodules following the T6 treatment. α-Al grains and primary β-Al5FeSi needles were simultaneously refined. The addition of 1.0 wt.% REs and subsequent T6 treatment yielded the highest tensile strength, elongation, and hardness of the alloy.

scholarly journals Changing in Fatigue Life of 300 M Bainitic Steel After Laser Carburizing and Plasma Nitriding

2018 ◽  
Vol 165 ◽  
pp. 21002 ◽  
Author(s):  
Antonio J. Abdalla ◽  
Douglas Santos ◽  
Getúlio Vasconcelos ◽  
Vladimir H. Baggio-Scheid ◽  
Deivid F. Silva
Keyword(s):  
Mechanical Properties ◽  
Fatigue Life ◽  
Plasma Nitriding ◽  
Fatigue Behavior ◽  
High Strength ◽  
Tensile Tests ◽  
Steel Sample ◽  
Fatigue Tests ◽  
300M Steel ◽  
Structural Applications

In this work 300M steel samples is used. This high-strength steel is used in aeronautic and aerospace industry and other structural applications. Initially the 300 M steel sample was submitted to a heat treatment to obtain a bainític structure. It was heated at 850 °C for 30 minutes and after that, cooled at 300 °C for 60 minutes. Afterwards two types of surface treatments have been employed: (a) using low-power laser CO2 (125 W) for introducing carbon into the surface and (b) plasma nitriding at a temperature of 500° C for 3 hours. After surface treatment, the metallographic preparation was carried out and the observations with optical and electronic microscopy have been made. The analysis of the coating showed an increase in the hardness of layer formed on the surface, mainly, among the nitriding layers. The mechanical properties were analyzed using tensile and fatigue tests. The results showed that the mechanical properties in tensile tests were strongly affected by the bainitic microstructure. The steel that received the nitriding surface by plasma treatment showed better fatigue behavior. The results are very promising because the layer formed on steel surface, in addition to improving the fatigue life, still improves protection against corrosion and wear.

Modification in Texture of Magnesium by the Addition of Rare Earth Elements and its Influence on Mechanical Properties

2012 ◽  
Vol 736 ◽  
pp. 307-315 ◽  
Author(s):  
Murugavel Suresh ◽  
Satyam Suwas
Keyword(s):  
Mechanical Properties ◽  
Rare Earth ◽  
Magnesium Alloys ◽  
Aluminium Alloys ◽  
Room Temperature ◽  
Main Obstacle ◽  
Rare Earth Addition ◽  
Structural Applications ◽  
Re Elements ◽  
The Relationship

Mg alloys show limited room temperature formability compared to its lightweight counterpart aluminium alloys, which is a main obstacle in using this metal for most of the structural applications. However, it is known that grain refinement and texture control are the two possibilities for the improvement of formability of magnesium alloys. Amongst the approaches attempted for the texture weakening, additions through of rare-earth (RE) elements have been found most effective. The relationship between the texture and ductility is well established. In this paper, the effect of rare earth addition on texture weakening has been summarized for various magnesium alloys under the two most common modes of deformation methods.

Sign in / Sign up

Export Citation Format

Share Document