scholarly journals Integration of Geological, Geochemical, Mineralogical and Remote Sensing Data for Studying Zeolite Deposits of Al-Ahyuq-Taiz, Yemen

2021 ◽  
Vol 9 (9) ◽  
pp. 1827-1841
Author(s):  
Ali M. Qaid
Keyword(s):  
Chemical Properties ◽  
Remote Sensing Data ◽  
Volcanic Glass ◽  
Industrial Applications ◽  
Silica Content ◽  
Major Type ◽  
X Ray Diffraction ◽  
Zeolitic Tuff ◽  
Band Ratio ◽  
Colour Composite

Abstract: Zeolite deposits crop out at Al-Ahyuq area, and lies at about 89 km southwest of Taiz city. It is one of the most important zeolite localities in Yemen. The study area is covered by the Yemen volcanic group. X-Ray Diffraction (XRD) analyses showed that clinoptilolite is the major type of Al-Ahyuq zeolites with high purity. Chemical analysis shows that the studied zeolitic tuff samples have silica content ranging from 63.10 wt% - 71.1wt% with an average 68.69 wt%, Fe2O3 [as total iron] with an average 2.38wt%, MgO with an average 0.44 wt% and TiO2 with an average 0.17wt%. These chemical properties of Al-Ahyuq zeolite deposits are with low impurities content such as CaO and MgO, compared to those deposits found in other countries around the world. The chemical and mineralogical studies support that the zeolite minerals of the Al-Ahyuq area formed by subaerial hydrothermal alteration of the parent volcanic glass. The ASTER bands as false colour composite (1-R, 2-G, 3-B), and band ratios 3/9 and 4/6 highlighted area of zeolite deposits dominated as bright pixels. The band ratio combination 4/6-R, 2/1-G and 3/2-B is effective in mapping of Al-Ahyuq zeolitic tuffs. Spectra after being resampled to ASTER VNIR+SWIR bands of the study area comparing with the USGS library spectra of zeolite – clinoptilolite shows almost identical and confirmed that clinoptilolite is the major of zeolite deposits in Al-Ahyuq area. Chemical and mineralogical investigation of the Al-Ahyuq zeolite (clinoptilolite) deposits recommends many important agricultural, environmental, and industrial applications. Keyword: Zeolitic tuff; clinoptilolite; XDR; XRFS; ASTER data; band ratio

scholarly journals COMPARATIVE STUDY OF THE CESIUM UPTAKE ABILITY BETWEEN HEU-TYPE (CLINOPTILOLITE-HEULANDITE) ZEOLITIC TUFF AND PURE HEULANDITE

2020 ◽  
Vol 56 (1) ◽  
pp. 56
Author(s):  
Christina Mytiglaki ◽  
Nikolaos Kantiranis ◽  
Panagiotis Misaelides ◽  
Fotini Noli ◽  
Anestis Filippidis
Keyword(s):  
Mineral Chemistry ◽  
Solution Concentration ◽  
Industrial Applications ◽  
Radioactive Cesium ◽  
X Ray Diffraction ◽  
Zeolitic Tuff ◽  
Suitable Material ◽  
Type Zeolite ◽  
Cesium Uptake

Specific continuous layers of zeolitic tuff in Ntrista stream location of Petrota area of Evros region (NA11) and pure natural crystals of heulandite (HEU1) from the collection of the Department of Mineralogy-Petrology-Economic Geology, School of Geology, Aristotle University of Thessaloniki, have been investigated. The X-Ray Diffraction analyses showed that the sample NA11 consists of 86 wt% HEU-type zeolite, 4 wt% micas+ clay-minerals, 4 wt% quartz, 2 wt% christobalite and 4 wt% feldspars, while the sample HEU1 is pure heulandite crystal. The mineral-chemistry was determined by SEM-EDS microanalyses. The zeolite of the NA11 sample is Ca-rich clinoptilolite and its chemical formulae is Ca1.8K1.0Mg0.7Na0.5Al6.4 Si29.5O72·21H2O, while the zeolite of the sample HEU1 is heulandite and its chemical formulae is Ca3.6Na1.0Κ0.2Sr0.2Ba0.1Al8.1Si27.6O72·21H2O. The uptake ability of the samples was measured by the AMAS method (Ammonium Acetate Saturation). The two examined materials show high uptake ability. The measured value for the zeolitic tuff NA11 is 231 meq/100g, while for the heulandite crystal (HEU1) is 296 meq/100g. For the determination of the cesium sorption a CsNO3 solution (concentration 500 mg/L), labelled with small activity of 137Cs, and pH 2-12 was used. The sorption of the cesium by the two materials, was determined by measuring the gamma radiation emitted by the 137Cs tracer. The zeolitic tuff presents higher uptake ability of radioactive cesium than the pure heulandite crystal, whereas the sorption of radioactive cesium is not significantly affected by the pH values of the initial solutions in the range pH 2-12.The clinoptilolitic zeolitic tuff NA11 is suitable material for various environmental, agricultural and industrial applications.

Mineralogy of volcanically derived alluvial soils at Moshi, Tanzania

Soil Research ◽  
2016 ◽  
Vol 54 (8) ◽  
pp. 926
Author(s):  
T. S. Taylor ◽  
J. C. Hughes ◽  
L. W. Titshall
Keyword(s):  
Electron Microscopy ◽  
Clay Fraction ◽  
Chemical Properties ◽  
Volcanic Glass ◽  
X Ray Diffraction ◽  
Surface Areas ◽  
Transmission Electron ◽  
Physical And Chemical ◽  
Extractable Iron ◽  
And Chemical Properties

Despite intensive commercial agriculture in the rift zone of Tanzania, mineralogical studies on the soils influenced by volcanic parent materials are scarce. A mineralogical investigation of the soils and two buried ash layers from an irrigated sugar estate was undertaken using X-ray diffraction, transmission electron microscopy and measurements of extractable iron, aluminium and silicon and the specific surface area (SSA) of the clay fraction. The dominant mineral in the sand and silt fractions was sanidine. The clay fractions contained mainly high-defect kaolin, illite and K-feldspar, with small amounts of calcite, talc and gibbsite in some samples. Electron microscopy revealed the presence of tubular and spheroidal halloysite and <0.5µm kaolinite crystals, as well as nanocrystalline material, probably allophane, and volcanic glass. The amounts of ferrihydrite (0.34–1.84%) and allophane (0.52–6.84%) were low in the soils but higher in the buried ash layers. The surface areas of the clay fractions were high (up to 145m2g–1) and it was calculated that 5% allophane constituted 22% of the total SSA. Although all soils were dominated by halloysite and small kaolinite particles, it is likely that the small amounts of allophane with high SSA has a strong effect on their physical and chemical properties.

Isatin: A Scaffold with Innumerable Biodiversity

2020 ◽  
Vol 20 ◽  
Author(s):  
Priyobrata Nath ◽  
Agnish Mukherjee ◽  
Sougata Mukherjee ◽  
Sabyasachi Banerjee ◽  
Samarpita Das ◽  
...  
Keyword(s):  
Biological Effects ◽  
Scientific Information ◽  
Research Work ◽  
Chemical Properties ◽  
Industrial Applications ◽  
Biologically Relevant ◽  
Extensive Information ◽  
Relevant Compound ◽  
A Minor ◽  
Clinical Conditions

: Isatin is an endogenous and a significant category of fused heterocyclic component, widely been a part of several potential biologically useful synthetics. Since its discovery, tons of research work has been conducted with respect to the synthesis, chemical properties, and biological and industrial applications. It contains indole nucleus having both lactam and keto moiety which while being a part of a molecular framework exerted several biological effects, viz.; antimicrobial, antitubercular, anticonvulsant, anticancer etc. Isatin derivatives are synthetically significant substrates, which can be utilized for the synthesis of huge diversified chemical entities of which few members emerged to be a drug. The reason for this review is to provide extensive information pertaining to the chemistry and its significance in altering several pathological states of isatin and its derivatives. A Structure Activity Relationships study thus developed through a gamut of scientific information indicates the importance of mostly electron withdrawing groups, halogens, nitro, alkoxy and to a minor extent groups with positive inductive effects, such as methyl at position 1, 5, 6 and 7 of isatin in alleviating several clinical conditions. It is also observed from the survey that the presence of two oxo groups at position 2 and 3 sometimes become insignificant as fusion with a heterocycle at those position resulted in a biologically relevant compound.

scholarly journals Experimental and Physico-Chemical Comparison of ZnO Nanoparticles’ Activity for Photocatalytic Applications in Wastewater Treatment

Catalysts ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 678
Author(s):  
Stefano Alberti ◽  
Irene Basciu ◽  
Marco Vocciante ◽  
Maurizio Ferretti
Keyword(s):  
Wastewater Treatment ◽  
Zno Nanoparticles ◽  
Energy Dispersive Spectrometer ◽  
Chemical Properties ◽  
X Ray Diffraction ◽  
Commercial Sample ◽  
Synthetic Process ◽  
Physico Chemical ◽  
Photocatalytic Applications ◽  
Reflectance Measurements

In this contribution, the photoactivity upon activation by simulated sunlight of zinc oxide (ZnO) obtained from two different synthetic pathways (Acetate and Nitrate) is investigated for water purification. Different reagents and processes were exploited to obtain ZnO nanoparticles. Products have been characterized by means of X-Ray Diffraction, Scanning Electron Microscopy along with Energy Dispersive Spectrometer, Dynamic Light Scattering, and Diffuse Reflectance Measurements, to highlight the different outcomes ascribable to each synthesis. A comparison of characteristics and performances was also carried out with respect to commercial ZnO. Nanoparticles of this semiconductor can be obtained as aggregates with different degrees of purity, porosity, and shape, and their physical-chemical properties have been addressed to the specific use in wastewater treatment, testing their effectiveness on the photocatalytic degradation of methylene blue (MB) as a model pollutant. Excluding the commercial sample, experimental results evidenced a better photocatalytic behavior for the ZnO Nitrate sample annealed at 500 °C, which was found to be pure and stable in water, suggesting that ZnO could be effectively exploited as a heterogeneous photocatalyst for the degradation of emerging pollutants in water, provided that thermal treatment is included in the synthetic process.

scholarly journals Statistical analysis of the reproducibility of residual stress measurements in cold extruded parts

2021 ◽  
Author(s):  
Fabian Jaeger ◽  
Alessandro Franceschi ◽  
Holger Hoche ◽  
Peter Groche ◽  
Matthias Oechsner
Keyword(s):  
Residual Stress ◽  
Statistical Analysis ◽  
Stress Measurement ◽  
Industrial Applications ◽  
Cold Extrusion ◽  
X Ray Diffraction ◽  
Forming Process ◽  
X Ray ◽  
Stress States ◽  
Key Aspects

AbstractCold extruded components are characterized by residual stresses, which originate from the experienced manufacturing process. For industrial applications, reproducibility and homogeneity of the final components are key aspects for an optimized quality control. Although striving to obtain identical deformation and surface conditions, fluctuation in the manufacturing parameters and contact shear conditions during the forming process may lead to variations of the spatial residual stress distribution in the final product. This could lead to a dependency of the residual stress measurement results on the relative axial and circumferential position on the sample. An attempt to examine this problem is made by the employment of design of experiments (DoE) methods. A statistical analysis of the residual stress results generated through X-Ray diffraction is performed. Additionally, the ability of cold extrusion processes to generate uniform stress states is analyzed on specimens of austenitic stainless steel 1.4404 and possible correlations with the pre-deformed condition are statistically examined. Moreover, the influence of the coating, consisting of oxalate and a MoS2 based lubricant, on the X-Ray diffraction measurements of the surface is investigated.

scholarly journals The Influence Of NO/O2 On The NOx Storage Properties Over A Pt-Ba-Ce/γ-Al2O3 Catalyst

2019 ◽  
Vol 17 (1) ◽  
pp. 1459-1465
Author(s):  
Xuedong Feng ◽  
Jing Yi ◽  
Peng Luo
Keyword(s):  
Sol Gel ◽  
Chemical Properties ◽  
No Oxidation ◽  
Test Results ◽  
X Ray Diffraction ◽  
Storage Performance ◽  
Transmission Electron ◽  
Temperature Programmed ◽  
Physical And Chemical ◽  
Al2o3 Catalyst

AbstractWith the purpose of studying the influence of NO/O2 on the NOx storage activity, a Pt-Ba-Ce/γ-Al2O3 catalyst was synthesized by an acid-aided sol-gel method. The physical and chemical properties of the catalyst were characterized by X-ray diffraction (XRD) and Transmission Electron Microscope (TEM) methods. The results showed that the composition of the catalyst was well-crystallized and the crystalline size of CeO2 (111) was about 5.7 nm. The mechanism of NO and NO2 storage and NOx temperature programmed desorption (NO-TPD) experiments were investigated to evaluate the NOx storage capacity of the catalyst. Pt-Ba-Ce/γ-Al2O3 catalyst presented the supreme NOx storage performance at 350℃, and the maximum value reached to 668.8 μmol / gcat. Compared with O2-free condition, NO oxidation to NO2 by O2 had a beneficial effect on the storage performance of NOx. NO-TPD test results showed that the NOx species stored on the catalyst surface still kept relatively stable even below 350℃.

scholarly journals Born out of Fire and Ice: Polymorph Studies of the Antiviral Famciclovir

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 129
Author(s):  
Liana Vella-Zarb ◽  
Ulrich Baisch
Keyword(s):  
Variable Temperature ◽  
Chemical Properties ◽  
Crystal Form ◽  
X Ray Diffraction ◽  
Crystal Forms ◽  
X Ray ◽  
Physical Chemical ◽  
Diffraction Patterns ◽  
Crystalline Forms

There is much interest and focus on solid forms of famciclovir. However, in spite of the abundance of reported differences in oral bioavailability, compressibility, and other physical–chemical properties of the various crystal forms of this drug, very little precise structural analysis is available in the literature to date. The form used in the commercial formulation is the anhydrous form I. Patents and patent applications report three different anhydrous crystalline forms on the basis of unindexed powder diffraction patterns. Single-crystal and variable-temperature X-ray diffraction experiments using the commercially available anhydrous form of famciclovir were carried out and led not only to the crystal structure determination of the anhydrous form I, but also to discovery of a new crystal form of anhydrous famciclovir from powder data.

Micro-Ribbons and Micro-Wires Silica Synthesis Using Bottom-Top Technique

2020 ◽  
Vol 1008 ◽  
pp. 33-38
Author(s):  
Marwa Nabil ◽  
Hussien A. Motaweh
Keyword(s):  
Selection Process ◽  
Chemical Properties ◽  
Industrial Applications ◽  
Preparation Process ◽  
Pure Silica ◽  
One Step ◽  
Materials Used ◽  
Sonication Technique ◽  
Silica Synthesis ◽  
Physical And Chemical

Silica is one of the most important materials used in many industries. The basic factor on which the selection process depends is the structural form, which is dependent on the various physical and chemical properties. One of the common methods in preparing pure silica is that it needs more than one stage to ensure the preparation process completion. The goal of this research is studying the nucleation technique (Bottom-top) for micro-wires and micro-ribbons silica synthesis. The silica nanoand microstructures are prepared using a duality (one step); a combination of alkali chemical etching process {potassium hydroxide (3 wt %) and n-propanol (30 Vol %)} and the ultra-sonication technique. In addition, the used materials in the preparation process are environmentally friendly materials that produce no harmful residues. The powder product is characterized using XRD, FTIR, Raman spectrum and SEM for determining the shape of architectures. The most significant factor of the nucleation mechanism is the sonication time of silica powder production during the dual technique. The product stages are as follows; silica nanoparticles (21-38 nm), nanoclusters silica (46 – 67 nm), micro-wires silica (1.17 – 6.29 μm), and micro-ribbons silica (19.4 – 54.1 μm). It's allowing for use in environmental applications (multiple wastewater purification, multiple uses in air filters, as well as many industrial applications).

Monitoring of Fluctuations in the Physical and Chemical Properties of a High-Calcium Fly Ash

1987 ◽  
Vol 113 ◽  
Author(s):  
Scott Schlorholtz ◽  
Ken Bergeson ◽  
Turgut Demirel
Keyword(s):  
Fly Ash ◽  
Chemical Properties ◽  
Operating Conditions ◽  
Physical And Chemical Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Morphological Studies ◽  
High Calcium ◽  
Physical And Chemical ◽  
And Chemical Properties

ABSTRACTThe physical and chemical properties of fly ash produced at Ottumwa Generating Station have been monitored since April, 1985. The fly ash is produced from burning a low sulfur, sub-bituminous coal obtained from the Powder River Basin near Gillette, Wyoming. One-hundred and sixty samples of fly ash were obtained during the two year period. All of the samples were subjected to physical testing as specified by ASTM C 311. About one-hundred of the samples were also subjected to a series of tests designed to monitor the self-cementing properties of the fly ash. Many of the fly ash samples were subjected to x-ray diffraction and fluorescence analysis to define the mineralogical and chemical composition of the bulk fly ash as a function of sampling date. Hydration products in selected hardened fly ash pastes, were studied by x-ray diffraction and scanning electron microscopy. The studies indicated that power plant operating conditions influenced the compressive strength of the fly ash paste specimens. Mineralogical and morphological studies of the fly ash pastes indicated that stratlingite formation occurred in the highstrength specimens, while ettringite was the major hydration product evident in the low-strength specimens.

Physico-Chemical and Morphological Changes of Sayong Kaolinite Clay Treated with Sulphuric Acid for Enzyme Immobilization

2013 ◽  
Vol 832 ◽  
pp. 589-595 ◽  
Author(s):  
N.A. Edama ◽  
A. Sulaiman ◽  
K.H. Ku Hamid ◽  
M.N. Muhd Rodhi ◽  
Mohibah Musa ◽  
...  
Keyword(s):  
Surface Area ◽  
Sulphuric Acid ◽  
Enzyme Immobilization ◽  
Morphological Changes ◽  
Chemical Properties ◽  
X Ray Diffraction ◽  
Kaolinite Clay ◽  
X Ray ◽  
Mineral Oxides ◽  
Physico Chemical

This study analyzed the effects of sulphuric acid (H2SO4) treatment on pysico-chemical properties and morphological changes of clay obtained from Sg. Sayong, Perak. The clay was ground and sieved to <150μm and treated with different concentrations of H2SO4. The treatment was completed by refluxing the clay with different concentration of H2SO4 (1M, 5M and 10M ) at 100 °C for 4 hours and followed by calcination at 500 °C for 1 hour. The physic-chemical properties and morphological changes of the untreated and treated clay were compared using Surface Area Analyser, X-Ray Diffraction (XRD), Field Emission Scanning Electron Micrograph (FESEM), X-Ray Diffraction (XRD) and Fourier Transformed Infrared Spectroscopy (FTIR). The results showed that acid treatment of 5M increased the surface area from 25 m2/g to 75 m2/g and the pore volume increased from 0.1518 cc/g to 0.3546 cc/g. The nanopore size of the clay decreased from 24.8 nm to 19.4 nm after treated with acid. This can be explained due to the elimination of the exchangeable cations and generation of microporosity. The results of XRF showed SiO2 increased from 58.34% to 74.52% and Al2O3 reduced from 34.6% to 18.31%. The mineral oxides such as Fe2O3, MgO, CaO, K2O and TiO2 also reduced. This concluded that H2SO4 treatment has led to significant removal of octahedral Al3+, Fe3+ cations and other impurities. In conclusion, this study showed the physico-chemical properties and morphology of Sayong clay were improved once treated with H2SO4 and therefore suggests better supporting material for enzyme immobilization.

Sign in / Sign up

Export Citation Format

Share Document