Experimental Analysis of Partial Replacement of Glass Powder and Fly Ash with Different-Different Percentages of Cement to Improve the Compressive and Flexural Strength of Concrete

2021 ◽  
Vol 9 (9) ◽  
pp. 1037-1050
Author(s):  
Ronak Gupta
Keyword(s):  
Blast Furnace ◽  
Fly Ash ◽  
Rice Husk ◽  
Glass Powder ◽  
Amorphous Material ◽  
Partial Replacement ◽  
Inert Material ◽  
Stability Parameters ◽  
Conventional Concrete ◽  
Concrete Mix

Abstract: The ordinary material for construction is concrete in India and its production causes some environmental effects during the production. There are many countries seeing deficiency of human dumping wastes or it’s becoming very serious day by day for each nation. In order to deal with atmospheric impact related with cement manufacturing and so there is a requirement to produce an alternative binding material for preparing concrete. The development of concrete could reducing the utilization of naturally occurring sources or lesser the load of pollutants on atmosphere. In current scenario, no. of researchers have recognized the uses of additional cementing materials like silica fumes, fly ash, glass powder, rice husk ash, blast furnace slag etc. It could also change the different properties of hardened and freshen state of concrete, and also contributing the financial system in constructional cost. Efforts put on the concrete construction to mix fly ash and waste glass powder as half substitute with cement .Now a days Glass used in different way in day-to-day life. As glass is non-biodegradable, landfills don’t provided an environmental eco-friendly resolution for dumping. Fly ash containing large amount of silica in comparison to cement. In current scenerio lots of industries producing more quantity of fly ash or its sold out very cheapest price in market. Glass is an inert material which could be recycled and used several times without altering its chemical property. Glass is an amorphous material which having high % of silica content. This property makes it probable pozzolanic property when its particles sizes is less than 75 mm. An important anxiety related to the uses of glass powder in concrete mix is that is chemical reaction happen among the alkali in pore solution and silica rich glass particle, which is called Alkali-Silicate. Reactions could be more harmful for the stability parameters of concrete, for this proper safety measure should be taken to reduce its effects. The addition of fly ash in glass concrete reducing the alkalies, silica reaction and improves the workability and durability of concrete. Unwanted glass powder is using for preparing concrete which leads environmental ecofriendly. The main purpose of this study is to find out effectiveness on durability of unwanted glass powder and fly ash based concrete. For analysis it was proposed that the uses of unwanted glass powder and fly ash as half substitution with cement in following proportion (10%, 20%, 30%, 40%) in concrete mix. Compressive strengthening of cubes and flexural strengthening of beams at the interval of 7th, 28th days were considered and compared with the conventional concrete. The results showing the probability of using unwanted glass powder and fly ash as half substitution with cement in concrete. Keywords: Silica fumes, Blast furnace, Rice husk, Glass powder, Fly ash, Compressive strengthening, Flexure strengthening

scholarly journals Experimental Works on Self-Compacting Concrete By Partial Replacement of Rice Husk Ash with Subjected To Acid Attack

2020 ◽  
Vol 9 (3) ◽  
pp. 664-667
Keyword(s):  
Sulphuric Acid ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Sulphuric Acid Solution ◽  
Partial Replacement ◽  
Acid Attack ◽  
Conventional Concrete ◽  
Concrete Mix ◽  
Normal Water ◽  
Gain Characteristic

The objectives of this work is effect of Rice husk ash (AWM) in self-compaction concrete (SCR) in order to increase in strength and a better bonding between aggregate and cement paste. SCR had an improvement over conventional concrete so that it can be placed easily without vibration or mechanical consolidation. The properties of SCR have been studied in several researches due to its importance and ability to solve the problems of concrete mix. AWM was used to substitute cement in stepped concentration of 0 %, 5%, 10%, 15%, 20% and used to gain characteristic CS of M40 grade concrete mix. It is cured normal water and sulphuric acid solution (H2SO4 ) in for different ages (7days, 28days and 60days) and the strengths were determined. Sulphuric acid used in the percentages of 0%, 1%, 3%, 5%.

scholarly journals Behavior of Quarry Rock Dust, Fly Ash and Slag Based Geopolymer Concrete Columns Reinforced with Steel Fibers under Eccentric Loading

2021 ◽  
Vol 11 (15) ◽  
pp. 6740
Author(s):  
Rana Muhammad Waqas ◽  
Faheem Butt
Keyword(s):  
Fly Ash ◽  
Concrete Cover ◽  
Steel Fibers ◽  
Structural Behavior ◽  
Partial Replacement ◽  
Geopolymer Concrete ◽  
Fiber Reinforced ◽  
Conventional Concrete ◽  
Source Materials ◽  
Rock Dust

Geopolymer concrete, also known as an earth-friendly concrete, has been under continuous study due to its environmental benefits and a sustainable alternative to conventional concrete construction. The supplies of many source materials, such as fly ash (FA) or slag (SG), to produce geopolymer concrete (GPC) may be limited; however, quarry rock dust (QRD) wastes (limestone, dolomite, or silica powders) formed by crushing rocks appear virtually endless. Although significant experimental research has been carried out on GPC, with a major focus on the mix design development, rheological, durability, and mechanical properties of the GPC mixes; still the information available on the structural behavior of GPC is rather limited. This has implications in extending GPC application from a laboratory-based technology to an at-site product. This study investigates the structural behavior of quarry-rock-dust-incorporated fiber-reinforced GPC columns under concentric and eccentric loading. In this study, a total of 20 columns with 200 mm square cross-section and 1000 mm height were tested. The FA and SG were used as source materials to produce GPC mixtures. The QRD was incorporated as a partial replacement (20%) of SG. The conventional concrete (CC) columns were prepared as the reference specimens. The effect of incorporating quarry rock dust as a replacement of SG, steel fibers, and loading conditions (concentric and eccentric loading) on the structural behavior of GPC columns were studied. The test results revealed that quarry rock dust is an adequate material that can be used as a source material in GPC to manufacture structural concrete members with satisfactory performance. The general performance of the GPC columns incorporating QRD (20%) is observed to be similar to that of GPC columns (without QRD) and CC columns. The addition of steel fibers considerably improves the loading capacity, ductility, and axial load–displacement behavior of the tested columns. The load capacities of fiber-reinforced GPC columns were about 5–7% greater in comparison to the CC columns. The spalling of concrete cover at failure was detected in all plain GPC columns, whereas the failure mode of all fiber-reinforced GPC columns is characterized with surface cracking leading to disintegration of concrete cover.

Effects of Fly Ash and Granular Blast-Furnace Slag on Development Rate of Strength of Concrete

2014 ◽  
Vol 629-630 ◽  
pp. 371-375
Author(s):  
Ji Wei Cai ◽  
Si Jia Yan ◽  
Gong Lei Wei ◽  
Lu Wang ◽  
Jin Jin Zhou
Keyword(s):  
Blast Furnace ◽  
Fly Ash ◽  
Blast Furnace Slag ◽  
Development Rate ◽  
Mineral Admixture ◽  
Mineral Admixtures ◽  
Conventional Concrete ◽  
Enhancing Effect ◽  
Substitution Content ◽  
Furnace Slag

Fly ash (FA) and granular blast-furnace slag (GBFS) are usual mineral admixtures to conventional concrete, and their contents substituted for Portland cement definitely affect development rate of strength of concrete. C30 and C60 concrete samples with FA and/or GBFS were prepared to study the influence of substitution content of the mineral admixtures on 3 d, 7 d and 28 d strength. The results reveal that the development rate of strength in period from 3 d to 7 d gets slow with increasing content of mineral admixtures except for concrete with only GBFS less than 20%. In the case of substituting FA as the only mineral admixture for part of cement, the development rate of strength of C30 concrete in period from 7 d to 28 d keeps roughly constant even that of C60 concrete increases. When substituting mineral admixtures in the presence of GBFS for cement within experimental range, the development rate of strength in period from 7 d to 28 d gets fast with increasing substitution content. The enhancing effect of combining FA and GBFS occurs in period from 7 d to 28 d for both C30 and C60 concretes (FA+GBFS≤40%), even occurs in period from 3 d to 7 d for C60 concrete. Based on 7 d strength and the development rate, 28 d strength of concrete can be predicted accurately.

scholarly journals Resistance of Acid Attack on Geopolymer Concrete Developed with Partial Replacement of Course Aggregate by Recycled Aggregate

2019 ◽  
Vol 8 (4) ◽  
pp. 12142-12146
Keyword(s):  
Fly Ash ◽  
Coarse Aggregate ◽  
Recycled Aggregate ◽  
Partial Replacement ◽  
Geopolymer Concrete ◽  
Acid Attack ◽  
Great Strength ◽  
Conventional Concrete ◽  
Existing Structures ◽  
Binder Material

Geopolymer concrete is one of the major developments in recent years resulting in utilization of fly ash in huge quantities and eventually reducing cement consumption and ultimately reducing emission of greenhouse gases.The geopolymer concrete is produced by using activated fly ash as binder material instead of cement. Geopolymer concrete accomplishes great strength and looks similar to conventional concrete. Recycled coarse aggregate (RCA )which is coming from demolition of construction of old and existing structures has been used in this study. The durability property; acid attack resistance with partial replacement of coarse aggregate by recycled aggregate in geopolymer and conventional concrete for the different composition such as 10, 20, 30 and 40percentage for a period of 15, 45,75 and 105 days has been evaluated. From the results it was observed that in both natural and recycled aggregate of Geopolymer concrete is highly resistant to acids such as sulphuric acid and hydrochloric acid compared to conventional concrete of respective aggregates.

Mechanical performance of engineered cementitious composites incorporating recycled glass powder

2020 ◽  
Vol 47 (12) ◽  
pp. 1311-1319 ◽  
Author(s):  
Adeyemi Adesina ◽  
Sreekanta Das
Keyword(s):  
Fly Ash ◽  
Power Plants ◽  
Glass Powder ◽  
Mechanical Performance ◽  
Partial Replacement ◽  
Cementitious Composite ◽  
Engineered Cementitious Composite ◽  
Recycled Glass ◽  
Alternative Materials ◽  
Coal Power Plants

Engineered cementitious composite (ECC) is conventionally made up of high content fly ash (FA) combined with Portland cement (PC) as a binder. However, the growing call for sustainability is leading to continuous decommissioning of various coal power plants around the world thereby limiting the supply of fly ash available for ECC production. Therefore, it is of high importance to find alternative materials that can be incorporated into ECC as a partial replacement of the conventional binders. This experimental investigation was carried out to investigate the feasibility of incorporating glass powder (GP) as binder into ECC mixtures. The mechanical performance in terms of its compressive, tensile, and flexural properties was evaluated. Results from this study showed that 25% FA can be replaced with GP without any significant reduction in the mechanical performance of ECC mixtures. Microstructural investigations of the mixtures incorporating GP show good bonding between the cementitious matrix and the fibres.

scholarly journals Analysis of The Mechanical Properties of Concrete Based on Fly Ash and Palm Oil Clinkers

2021 ◽  
Vol 1 (4) ◽  
pp. 31-35
Author(s):  
L Opirina ◽  
Azwanda Azwanda ◽  
R Febrianto
Keyword(s):  
Fly Ash ◽  
Palm Oil ◽  
Strength Test ◽  
Fine Aggregate ◽  
Concrete Composition ◽  
Conventional Concrete ◽  
Concrete Material ◽  
Compressive Strength Test ◽  
Concrete Mix ◽  
Main Material

Concrete is the result of a mixture of cement, aggregate and water. Under certain conditions, the concrete mixture can be added with additives and admixture to get the concrete as needed. Cement is the most important material in the manufacture of conventional concrete. When cement is produced, the same amount of CO2 will also be generated as a side effect and pollute the atmosphere. Fly ash as an alternative to cement will be introduced as an alternative concrete material to reduce the use of cement in the concrete mix. In addition to the use of charcoal fly ash as a partial substitute for cement, this study also uses palm oil clinkers as a substitute for fine aggregate as much as 20%. This replacement material is an industrial waste which has the main content of silica and alumina which is similar to the main material for forming concrete. In addition, the use of these two materials also aims to reduce the exploration of the use of natural materials. This research introduces 3 kinds of concrete composition. The grouping is based on the ratio of fly ash and cement used, namely (60%:40%), (70%:30%) and (80%:20%). The test object used is a concrete cylinder with a diameter of 150 mm and a height of 300 mm. Tests were carried out at the age of 28 days of concrete. The compressive strength test showed that the best concrete was produced from the combination of the addition of 60% fly ash of coal aged 28 days, which was 4.21 MPa.

scholarly journals Investigative Study of Partial Replacement of Cement with Bio-Cement, Fly Ash and Natural Pozzolans

2021 ◽  
Vol 12 (1S) ◽  
pp. 432-436
Author(s):  
Dr.Sarvesh, Et. al.
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Main Property ◽  
Partial Replacement ◽  
Self Healing ◽  
Split Tensile Strength ◽  
Conventional Concrete ◽  
Quality Properties ◽  
Natural Pozzolans ◽  
The Impact

Concrete is usually a combination of cement, coarse particles (aggregates and Sand) and water. It is used to design and improve the infrastructures.It is used to design and improve the infrastructures. Concrete has many advantages and disadvantage. The main property that is characteristic to a concrete’s workability is its compressive strength. Only through this single test, one can judge if cementing has been done appropriately. Possible advancements for development include the use of non-traditional and creative materials, and the reuse of waste materials with a specific end goal to replenish the absence of specific assets and to discover alternative ways to monitor the Earth..This investigation concentrate on Compressive strength, flexural and split tensile strength of Conventional Concrete (CC) and Class C fly ash remains with bio-cement and natural pozzolans to consider the impact of bio-concrete with blend extents of 0%,0.25%,0.5%,1% and 1.5% on quality properties. Moreover, effective self-healing usually occurred due to the use of polymers, microorganism and additional cementing material. It is the key issue to find out the self-healing efficiency’s effect to sealing the crack width successfully. And good resistance was observed during the bacterial chemical process against the freeze and thaw attacks.

scholarly journals A Sustainable Study on Permeable Concrete using Bagasse Ash and Rice Husk Ash as a Partial Replacement of Cement

2020 ◽  
Vol 184 ◽  
pp. 01083
Author(s):  
Dr. Vanathi ◽  
Dr.K Radhika ◽  
Ms. G. Swetha
Keyword(s):  
Rice Husk ◽  
Surface Runoff ◽  
Water Surface ◽  
Void Ratio ◽  
Coarse Aggregate ◽  
Rice Husk Ash ◽  
Partial Replacement ◽  
Conventional Concrete ◽  
Strength And Durability ◽  
Day By Day

Permeable concrete is a special concrete which consists of cement, coarse aggregate and water. Due to rapid growth of globalization and urbanization, the construction of concrete roads increasing day by day which leads to decrease in percolation of storm water, surface runoff occurring to the decrease in ground water table. In previous concrete, single sized aggregate is used to maintain the void ratio in the concrete. The cement paste is bonded with aggregate with a void ratio of 20%. In this investigation, concrete of M20 grade with water cement ratio of 0.38 is used. The properties of concrete were increased by using Rice husk ash and Bagasse ash in changed percentages (10%, 20%, 30%) by weight of cement and with the combination of rice husk ash and bagasse ash 10% (5%RA + 5%BA), 20%(10%RA+10%BA), 30%(15%RA+15%BA) are used. The compressive strength of cubes, split tensile of cylinders are casted, tested after 7 days and 28 days. After testing, the optimum percentages of replacement of admixtures are found in the Permeable concrete. Therefore the strength and durability properties of permeable concrete with the addition of bagasse ash and rice husk ash with partial replacement of cement are compared with conventional concrete.

scholarly journals Study of Fly Ash, Rice Husk Ash and Marble Powder as Partial Replacement to Cement in Concrete

2020 ◽  
Vol 13 (3) ◽  
pp. 315-321
Author(s):  
Dhiraj Ahiwale ◽  
Rushikesh Khartode
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Flexural Strength ◽  
Rice Husk ◽  
Coarse Aggregate ◽  
Rice Husk Ash ◽  
Partial Replacement ◽  
Scale Production ◽  
Environmental Threat ◽  
Marble Powder

Now days, the waste rice husk from rice mill, marble powder from tile industry and fly ash from steam power plant are necessary to utilize as partial replacement of cement for concrete production. Large scale production of cement required consumption of raw materials and energy as well as emissions to air which posse’s environmental threat in various areas of country. Apart from the environmental threat, there still exists the problem of shortage in many areas. Therefore, substitute material for concrete needs to be considered. The paper aims to analyze the compressive strength of concrete cubes and flexural strength of concrete beams made from partially replaced cement, sand, and coarse aggregate. This research study adopted in laboratory on 48 total specimens of grade M25 concrete cubes of size 150x150x150mm and concrte beams of size 100x100x500mm were casted. Out of the 48 concrete specimens cast, 6 each were made out 10%, 20%, and 30 % replacement of fly ash, rice husk ash and marble powder to cement in concrete. It was found that the compressive strength and flexural strength of concrete made from the mixture of 20 % partially replaced cement, sand and coarse aggregate was similar than the concrete made from without replaced cement , sand and coarse aggregate.

Sign in / Sign up

Export Citation Format

Share Document