scholarly journals Influence of different tuber weight on growth parameters of greater yam under Udaipur region

2020 ◽  
Vol 8 (2) ◽  
pp. 595-597
Author(s):  
Mithlesh Kumari Meena ◽  
RS Rathore
Keyword(s):  
Growth Parameters ◽  
Tuber Weight ◽  
Greater Yam

scholarly journals PENGARUH WAKTU PEMBERIAN NUTRISI PADA PRODUKSI BENIH KENTANG SECARA AEROPONIK DENGAN APLIKASI ROOT ZONE COOLING DI DATARAN RENDAH TROPIS

2018 ◽  
Vol 7 (3) ◽  
pp. 142
Author(s):  
Eni Sumarni ◽  
Noor Farid ◽  
Loekas Soesanto ◽  
Jajang Juansah
Keyword(s):  
Sea Level ◽  
Root Zone ◽  
Growth Parameters ◽  
Block Design ◽  
Plant Diseases ◽  
Growth And Yield ◽  
Tuber Weight ◽  
Central Java ◽  
Root Area ◽  
Randomized Block Design

Planting potatoes in the tropical lowlands as an effort to reduce the adverse effects of planting in the highlands such as erosion, pests and plant diseases has been carried out and the tubers have been successfully obtained. Planting of potato seeds was carried out with an aeroponic system and climate modification in the root zone cooling environment. Climate modification is carried out at an altitude of 250 m asl and <125 m asl. The stability of the temperature in the aeroponic chamber can be maintained by regulating the time of spraying cold nutrients through the nozzles to the root area. However, the importance of the time to provide nutrition in order to maintain the optimal temperature of the root area in aeroponic systems in the lowlands has not been widely reported scientifically. The purpose of this study was to obtain the appropriate time for nutrition in order to maintain optimal chamber temperature and to have an effect on the growth and yield of potato seeds. The research was conducted in the greenhouse of the Faculty of Agriculture, Jenderal Soedirman University, Purwokerto, Central Java, Indonesia. Height of place <125 m above sea level. The study was conducted from July to September 2017. The factors that were tried in the study were as follows: 1. Length of time for nutrition (T): T1: 2.5 minutes OFF and 15 minutes ON; T2: 5 minutes OFF, 15 minutes ON, T3: 10 minutes OFF, 15 minutes ON, T4: 15 minutes OFF, 15 minutes ON, 2. Varieties (V): V1 (Atlantic), V2 (Granola). Growth parameters observed: plant height, number of leaves, number of tubers, tuber weight. Experiment using a randomized block design with 3 replications. The data were analyzed by F test and continued with Duncan’s Multiple Range Testof 5% level.The results showed that the duration of nutrient administration by setting a timer gave different results on the growth and development of aeroponic plants of potato seeds in the lowlands 125 m above sea level. The duration of nutrition administration 2.5 minutes OFF gave the highest number of tubers and tuber weight compared to the duration of nutrition 5 minutes, 10 minutes and 15 minutes OFF. The number of tubers obtained is 7.3 tubers / plant with boto an average of 2 mg. The duration of nutrition is 5 minutes, 10 minutes and 15 minutes OFF does not produce tubers.

scholarly journals Pertumbuhan dan Hasil Dua Varietas Ubi Kayu pada Empat Dosis Pupuk Npk di Lahan Pasang Surut Kalimantan Selatan

2021 ◽  
Vol 2 ◽  
pp. 104-110
Author(s):  
Sutrisno Sutrisno ◽  
Sri Wahyuningsih
Keyword(s):  
Vegetative Growth ◽  
Plant Biomass ◽  
Growth Parameters ◽  
Fertilizer Application ◽  
Growth And Yield ◽  
Tuber Weight ◽  
Two Factors ◽  
Large Tuber ◽  
Npk Fertilizer ◽  
Four Levels

Tidal acid land is a potential land for cassava development. However, the development of cassava in tidal land faces many obstacles, one of which is the low availability of nutrients. This study aimed to determine the effect of NPK fertilizer in increasing the growth and yield of cassava in tidal land. The experiment consisted of two factors, the first factor was two varieties of cassava and the second factor was four levels of NPK fertilizer doses. The experiment was applied in a strip plot design with variety as the horizontal factor and the level of NPK fertilizer as the vertical factor and repeated three times. The growth parameters observed consisted of plant height, stem diameter, plant biomass weight, number of large tubers, number of small tubers, large tuber length, length of small tuber, the diameter of large tuber, the diameter of small tuber, the total number of tubers, the weight of large tuber, the weight of tuber small, and total tuber weight. The results showed that fertilizer application was effective in increasing vegetative growth and yield of cassava but increasing the dose of fertilizer was not effective in increasing the growth and yield of cassava. Differences in varieties generally did not show differences in vegetative growth and some yield components but still showed different results in the components of tuber length and total tuber weight.

scholarly journals Correlation of Growth Parameters with Yield of Two Cassava Varieties

2017 ◽  
Vol 1 (3) ◽  
pp. 100 ◽  
Author(s):  
Amarullah Amarullah ◽  
Didik Indradewa ◽  
Prapto Yudono ◽  
Bambang Hendro Sunarminto
Keyword(s):  
Growth Phase ◽  
Yield Components ◽  
Growth Parameters ◽  
Early Growth ◽  
Positive Contribution ◽  
Tuber Weight ◽  
Growth Phases ◽  
Vegetative Phase ◽  
Early Growth Phase ◽  
Cassava Varieties

The correlation of major growth parameters with the yield of cassava in different growth phases was investigated in 2013 and 2014. This experiment was conducted to assess the effect of two cassava varieties and the different growth phases to the yield and yield components. In experiment, the varieties as treatment were arranged in a randomized complete block design (RCBD) with three replications. Two varieties consisted of superior Adira-4 and local varieties Singgah were used. The growth parameters (plant height, stem diameter, leaf number) and yield components (number of tuber, weight per tuber and tuber yield) in early growth phase, maximum vegetative growth phase and charging tuber phase, were observed. Based on the correlation results, the growth parameters and the yield highly affected to the final outcome of cassava tubers at different growth phases. In the early growth phase, occurs high demand to assimilate with the expense of storage root. However, from the maximum vegetative phase, growth parameters began to show a significant positive contribution to the tuber weight. Weight of fresh tuber in both varieties increased at the charging of tubers phase and thereafter (enlarged bulb). The early growth phase and maximum vegetative phase might not generate a significant contribution to the final yield of cassava tuber. Making those two periods were not suitable time for optimum harvesting result, and it still depended on the variety and its allocation.

Studies of Ge/Si(100) and Observation of Atomic Steps on Si(100) using Biassed Secondary Electron Imaging in a UHV STEM

1990 ◽  
Vol 48 (1) ◽  
pp. 308-309
Author(s):  
Mohan Krishnamurthy ◽  
Jeff S. Drucker ◽  
John A. Venablest
Keyword(s):  
Secondary Electron ◽  
Critical Thickness ◽  
Surface Defects ◽  
Film Growth ◽  
Growth Parameters ◽  
High Vacuum ◽  
Ultra High Vacuum ◽  
Surface Steps ◽  
Epitaxial Crystal Growth ◽  
Electron Imaging

Secondary Electron Imaging (SEI) has become a useful mode of studying surfaces in SEM[1] and STEM[2,3] instruments. Samples have been biassed (b-SEI) to provide increased sensitivity to topographic and thin film deposits in ultra high vacuum (UHV)-SEM[1,4]; but this has not generally been done in previous STEM studies. The recently developed UHV-STEM ( codenamed MIDAS) at ASU has efficient collection of secondary electrons using a 'parallelizer' and full sample preparation system[5]. Here we report in-situ deposition and annealing studies on the Ge/Si(100) epitaxial system, and the observation of surface steps on vicinal Si(100) using b-SEI under UHV conditions in MIDAS.Epitaxial crystal growth has previously been studied using SEM and SAM based experiments [4]. The influence of surface defects such as steps on epitaxial growth requires study with high spatial resolution, which we report for the Ge/Si(100) system. Ge grows on Si(100) in the Stranski-Krastonov growth mode wherein it forms pseudomorphic layers for the first 3-4 ML (critical thickness) and beyond which it clusters into islands[6]. In the present experiment, Ge was deposited onto clean Si(100) substrates misoriented 1° and 5° toward <110>. This was done using a mini MBE Knudsen cell at base pressure ~ 5×10-11 mbar and at typical rates of 0.1ML/min (1ML =0.14nm). Depositions just above the critical thickness were done for substrates kept at room temperature, 375°C and 525°C. The R T deposits were annealed at 375°C and 525°C for various times. Detailed studies were done of the initial stages of clustering into very fine (∼1nm) Ge islands and their subsequent coarsening and facetting with longer anneals. From the particle size distributions as a function of time and temperature, useful film growth parameters have been obtained. Fig. 1 shows a b-SE image of Ge island size distribution for a R T deposit and anneal at 525°C. Fig.2(a) shows the distribution for a deposition at 375°C and Fig.2(b) shows at a higher magnification a large facetted island of Ge. Fig.3 shows a distribution of very fine islands from a 525°C deposition. A strong contrast is obtained from these islands which are at most a few ML thick and mottled structure can be seen in the background between the islands, especially in Fig.2(a) and Fig.3.

Evaluation of Azadirachtin on Arthrospira plantensis Gomont growth parameters and antioxidant enzymes

2020 ◽  
Vol 56 ◽  
pp. 8
Author(s):  
Hatice Tunca ◽  
Ali Doğru ◽  
Feray Köçkar ◽  
Burçin Önem ◽  
Tuğba Ongun Sevindik
Keyword(s):  
Enzyme Activity ◽  
Growth Parameters ◽  
Arthrospira Platensis ◽  
Proline Content ◽  
Enzyme Analysis ◽  
Free Proline ◽  
Sod Activity ◽  
Pesticide Pollution ◽  
Antioxidant Parameters ◽  
Mda Content

Azadirachtin (Aza) used as insecticide due to inhibiting growth of insects and preventing them from feeding on plants. To understand the effects of contamination of this insecticide on phototrophs, and to determine the responses of these organisms against these insecticides are extremely important in understanding how the ecosystem is affected. In this study, chlorophyll-a amount, OD 560 and antioxidant parameters (total SOD, APX, GR, Proline, MDA and H2O2) were determined in order to understand the effect of Aza on Arthrospira platensis Gomont. Aza was applied between 0–20 μg mL−1 concentrations for 7 days in the study. Enzyme analysis was conducted at the end of the 7th day. There was a statistically significant decrease in the absorbance of OD560 and the chlorophyll-a content in A. platensis cultures exposed to the Aza (0–20 μg mL−1) during 7 days due to the increase in pesticide levels. SOD activity decreased at 8, 16 and 20 μg mL−1 concentrations; GR enzyme activity showed a significant decrease compared to the control at a concentration of 20 μg mL−1. APX activity did not change significantly compared to control. The MDA content increased significantly at 16 and 20 μg mL−1 concentrations. The H2O2 content significantly increased at 12, 16 and 20 μg mL−1 concentrations (p < 0.05) while the free proline content decreased at 4 μg mL−1 concentration (p < 0.05). As a result, regarding the Aza concentrations used in this study may be a step to prevent pesticide pollution in the environment.

Ion Beam Sputter Deposition Of Ferroelectric Oxide Thin Films

1991 ◽  
Vol 223 ◽  
Author(s):  
Thomas M. Graettinger ◽  
O. Auciello ◽  
M. S. Ameen ◽  
H. N. Al-Shareef ◽  
K. Gifford ◽  
...  
Keyword(s):  
Thin Films ◽  
Lead Zirconate Titanate ◽  
Growth Parameters ◽  
Ion Beam ◽  
Lead Zirconate ◽  
Electro Optic ◽  
Integrated Optical ◽  
Pzt Films ◽  
Ion Beam Sputter Deposition ◽  
Ferroelectric Oxide

ABSTRACTFerroelectric oxide films have been studied for their potential application as integrated optical materials and nonvolatile memories. Electro-optic properties of potassium niobate (KNbO3) thin films have been measured and the results correlated to the microstructures observed. The growth parameters necessary to obtain single phase perovskite lead zirconate titanate (PZT) thin films are discussed. Hysteresis and fatigue measurements of the PZT films were performed to determine their characteristics for potential memory devices.

Growth of Dracaena marginata and Spathiphyllum ‘Petite’ in Sphagnum Peat- and Coconut Coir Dust-based Growing Media

1999 ◽  
Vol 17 (1) ◽  
pp. 49-52 ◽  
Author(s):  
Robert H. Stamps ◽  
Michael R. Evans
Keyword(s):  
Growth Parameters ◽  
Cocos Nucifera ◽  
Greenhouse Production ◽  
Growing Media ◽  
Sphagnum Peat ◽  
Affected Plant ◽  
Coir Dust ◽  
Media Component ◽  
The Media ◽  
Cocos Nucifera L

Abstract A comparison was made of Canadian sphagnum peat (SP) and Philippine coconut (Cocos nucifera L.) coir dust (CD) as growing media components for greenhouse production of Dracaena marginata Bak. and Spathiphyllum Schott ‘Petite’. Three soilless foliage plant growing mixes (Cornell, Hybrid, University of Florida #2 [UF-2]) were prepared using either SP or CD and pine bark (PB), vermiculite (V), and/or perlite (P) in the following ratios (% by vol): Cornell = 50 CD or SP:25 V:25 P, Hybrid = 40 CD or SP:30 V:30 PB, UF-2 = 50 CD or SP: 50 PB. Dracaena root growth was not affected by treatments but there were significant mix × media component interactions that affected plant top growth parameters. In general, the growth and quality of D. marginata were reduced by using CD in Cornell, had no effect in Hybrid, and increased in UF-2. S. ‘Petite’ grew equally well in all growing mixes regardless of whether CD or SP was used; however, plants grew more in Cornell and Hybrid than in UF-2. S. ‘Petite’ roots, which were infested with Cylindrocladium spathiphylli, had higher grades when grown in CD than when the media contained SP.

The effects and mechanisms of acids on the health of piglets and weaners – a review

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Piotr Nowak ◽  
Anita Zaworska-Zakrzewska ◽  
Andrzej Frankiewicz ◽  
Małgorzata Kasprowicz-Potocka
Keyword(s):  
Digestive System ◽  
Buffer Capacity ◽  
Growth Parameters ◽  
Feed Additives ◽  
Feed Additive ◽  
Growth Promoters ◽  
Qualitative And Quantitative ◽  
Inorganic Acids ◽  
Low Activity ◽  
The Eu

AbstractThe rearing of piglets is the most difficult period in the pigs’ production because of their poorly developed digestive system and the low activity of digestive enzymes. Problems in nutrition and stress cause some disorders in the functioning of the digestive system leading to diarrhea and the mortality of piglets. Starting in 2006 in the EU, a total ban on antibiotics in their use as growth promoters was introduced. Since then, new and safe feed additives have been sought in order to replace antibiotics. Organic and inorganic acids as well as their salts were recognized as effective and safe additives. Due to their properties, they can improve feed palatability and digestibility, reduce the buffer capacity of feed, impact the development and functioning of the pig’s digestive system and improve the health and growth parameters. However, the effectiveness of acids is related to their qualitative and quantitative share in the feed additive. In this review, some strategies for using organic acids, their mixtures and also some new multi-component products will be discussed.

Effect of rhizobacteria strains on the induction of resistance in barley genotypes against Cochliobolus sativus

2020 ◽  
Vol 13 (2) ◽  
pp. 83-92 ◽  
Author(s):  
A. Adam
Keyword(s):  
Plant Growth ◽  
Pseudomonas Putida ◽  
Growth Parameters ◽  
Disease Incidence ◽  
Dry Weight ◽  
Cochliobolus Sativus ◽  
Resistance Level ◽  
Wet Weight ◽  
Number Of Leaves ◽  
Barley Genotypes

SummaryEnhancement of the resistance level in plants by rhizobacteria has been proven in several pathosystems. This study investigated the ability of four rhizobacteria strains (Pseudomonas putida BTP1 and Bacillus subtilis Bs2500, Bs2504 and Bs2508) to promote the growth in three barley genotypes and protect them against Cochliobolus sativus. Our results demonstrated that all tested rhizobacteria strains had a protective effect on barley genotypes Arabi Abiad, Banteng and WI2291. However, P. putida BTP1 and B. subtilis Bs2508 strains were the most effective as they reduced disease incidence by 53 and 38% (mean effect), respectively. On the other hand, there were significant differences among the rhizobacteria-treated genotypes on plant growth parameters, such as wet weight, dry weight, plant height and number of leaves. Pseudomonas putida BTP1 strain was the most effective as it significantly increased plant growth by 15-32%. In addition, the susceptible genotypes Arabi Abiad and WI2291 were the most responsive to rhizobacteria. This means that these genotypes have a high potential for increase of their resistance against the pathogen and enhancement of plant growth after the application of rhizobacteria. Consequently, barley seed treatment with the tested rhizobacteria could be considered as an effective biocontrol method against C. sativus.

Sign in / Sign up

Export Citation Format

Share Document