scholarly journals COMPUTATIONAL PREDICTION OF A PROPELLER PERFORMANCE IN OPEN WATER CONDITION

SINERGI ◽  
2020 ◽  
Vol 24 (2) ◽  
pp. 163
Author(s):  
Ahmad Fitriadhy ◽  
N. Amira Adam ◽  
CJ. Quah
Keyword(s):  
Cfd Simulation ◽  
Open Water ◽  
Computational Prediction ◽  
Maximum Efficiency ◽  
Cfd Simulations ◽  
Water Condition ◽  
Pitch Ratio ◽  
Computational Fluid Dynamics Cfd ◽  
Preliminary Study ◽  
Propeller Performance

In presence of hydrodynamics phenomena occur surrounding propeller evidently affects on accuracy’s prediction of thrust, torque and its efficiency. To achieve the objective, a Computational Fluid Dynamics (CFD) simulations approach is then proposed to obtain a reliable prediction of the thrust (KT), torque (KQ) and efficiency (η) coefficients in open water condition. The effect of various blade numbers associated with constant propeller revolution (RPM=1320) and pitch ratio (P/D=1.0); are performed within the range of advance ratio from 0.1J1.0. The results revealed that the increase of blade number from Z=3 to 5 was proportional with the increase of thrust (KT) and torque (KQ) coefficients; meanwhile, it was reduced the maximum efficiency (η) that possibly lead to downgrade the propeller performance. It should be noted here, the propeller with three blade numbers (Z=3) provide the highest efficiency (η) up to 78.8% at J=0.9. These CFD simulation results are very useful as a preliminary study of propeller characteristics.

CFD simulation of empty fuel tanks separation from a trainer jet

2020 ◽  
Vol 92 (10) ◽  
pp. 1459-1468
Author(s):  
Aleksander Olejnik ◽  
Adam Dziubiński ◽  
Łukasz Kiszkowiak
Keyword(s):  
Cfd Simulation ◽  
Body Movement ◽  
Cfd Simulations ◽  
Content Type ◽  
Sequential Release ◽  
Wind Tunnel Data ◽  
Computational Fluid Dynamics Cfd ◽  
External Forces ◽  
Additional Value ◽  
Control Surfaces

Purpose This study aims to create 6-degree of freedom (SDOF) for computational fluid dynamics (CFD) simulations of body movement, and to validate using the experimental data for empty tank separation from I-22 Iryda jet trainer. The procedure has an ability to be modified or extended, to simulate, for example, a sequential release from the joints. Design/methodology/approach A set of CFD simulations are calculated. Both the SDOF procedure and the CFD simulation settings are validated using the wind tunnel data available for the aircraft. Findings The simulation using designed procedure gives predictable results, but offers availability to be modified to represent external forces, i.e. from body interaction or control system without necessity to model the control surfaces. Practical implications The procedure could be used to model the separation of external stores and design the deployment of anti-radar chaff, flares or ejection seats. Originality/value The work presents original work, caused by insufficient abilities of original SDOF procedure in ANSYS code. Additional value is the ability of the procedure to be easily modified.

scholarly journals Thermal management of machine compartment in a built-in refrigerator

2018 ◽  
Vol 240 ◽  
pp. 05005
Author(s):  
Milind Devle ◽  
Ankur Garg ◽  
Darci Cavali
Keyword(s):  
Heat Exchange ◽  
Cfd Simulation ◽  
Heat Extraction ◽  
Free Standing ◽  
Cfd Simulations ◽  
Performance Effectiveness ◽  
Hot Air ◽  
Computational Fluid Dynamics Cfd ◽  
Major Factors ◽  
Side Gap

In general a multi-door refrigerator machine compartment comprises of fan, condenser, compressor, control box, drain tray, and drain tubes. The performance of machine compartment depends upon the efficiency of heat extraction or heat exchange from heat generating components such as condenser and compressor. The efficiency of heat exchange can be improved by addressing two major factors, namely (1) Air bypass and (2) Hot air recirculation. The hot air recirculation in the machine compartment for builtin multi-door refrigerator configuration is the focus of this study. The results from Computational Fluid Dynamics (CFD) simulations show that efficiency of heat exchange for built-in application is lower than that for free-standing configuration. Recirculation of hot air and reduction in airflow are the two major factors which contribute towards the variation in machine compartment performance. The CFD simulations were coupled with Partial Factorial Design of Experiment (DoE) approach to systematically investigate the effect of variables such as (a) side gap and top gap between kitchen cabinetry and the refrigerator, (b) the baffle/flap (i.e. back and bottom of machine compartment) on the performance effectiveness of machine compartment. The results of the simulation provided critical design improvement directions resulting in performance improvement. Furthermore, the CFD simulation results were also compared to test data and the results compared favourably.

Transient CFD Visualization of Fossil Fuel Combustion Simulations

2003 ◽  
Author(s):  
Brian Dotson ◽  
Kent Eshenberg ◽  
Chris Guenther ◽  
Thomas O’Brien
Keyword(s):  
Power Plants ◽  
High Efficiency ◽  
Cfd Simulation ◽  
Low Cost ◽  
Three Dimensional ◽  
Cfd Simulations ◽  
Projection System ◽  
Computational Fluid Dynamics Cfd ◽  
High Level ◽  
Wall System

The design of high-efficiency lower-emission coal-fed power plants is facilitated by the extensive use of computational fluid dynamics (CFD) simulations. This paper describes work conducted at the National Energy Technology Laboratory (NETL) and Pittsburgh Supercomputing Center (PSC) to provide an environment for the immersive three-dimensional visualization of CFD simulation results. A low-cost high-resolution projection system has been developed in the visualization lab at NETL. This multi-wall system consists of four projection screens, three of which are tiled into four quadrants. The graphics for the multi-wall system are rendered using a cluster of eight personal computers. A high-level visualization interface named Mavis has also been developed to combine the powerful 3D modules of OpenDX with methods developed at NETL for studying multiphase CFD data. With Python, a completely new OpenDX user interface was built that extends and simplifies the features of a basic graphics library.

CFD Simulation of Propeller and Tunnel Thruster Performance

2014 ◽  
Author(s):  
Ping Lu ◽  
Sue Wang
Keyword(s):  
Flow Field ◽  
Cfd Simulation ◽  
Open Water ◽  
Ship Hull ◽  
Hydrodynamic Performance ◽  
Navier Stokes ◽  
Computational Domain ◽  
Flow Features ◽  
Computational Fluid Dynamics Cfd ◽  
Drag And Lift

In the present study, the hydrodynamic performance of a typical North Sea dynamic positioning (DP) shuttle tanker consisting of two main propellers, two rudders, and two bow tunnel thrusters is investigated by solving Reynolds-averaged Navier-Stokes (RANS) equations for a viscous flow. The focus of the numerical simulation is on the performance of propellers/rudders and bow tunnel thrusters considering the hydrodynamic interactions between propellers/thrusters, hull and current. The numerical model includes hull, propeller, rudder, bow tunnel thruster and flow field. First, an analysis of a propeller performance in open water is carried out by calculating the coefficient of thrust, torque, and propeller efficiency. Then, rudders are included in the analysis for the assessment of propeller/rudder performance. The pressure distribution on rudders, rudder’s drag and lift coefficients for different angles of attack, and flow field around the rudder are obtained. The interaction effects between propeller, rudder, ship hull, as well as bow tunnel thruster and ship hull are analyzed by adding detailed ship hull geometry in the computational domain. The tunnel thruster efficiency reduction due to current and ventilation is also analyzed. The presence of current leads to significant changes in the flow velocity and distribution of pressure in the tunnel outflow area as well as significant deflection of the propeller jet emitting from the tunnel. A comparison between Computational Fluid Dynamics (CFD) and model test results of flow features near the tunnel area with various current speeds is presented.

scholarly journals Prediction of Propeller Performance Using Computational Fluid Dynamics Approach

2019 ◽  
Vol 2 (2) ◽  
pp. 185-193
Author(s):  
Nur Amira Adam ◽  
Ahmad Fitriadhy ◽  
W. S. Kong ◽  
Faisal Mahmuddin ◽  
C. J. Quah
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Cfd Simulation ◽  
Computational Simulation ◽  
Open Water ◽  
Water Model ◽  
Thrust Coefficient ◽  
Propeller Performance ◽  
Prediction Approach ◽  
Thrust And Torque

A reliable prediction approach to obtain a sufficient thrust and torque to propel the ship at desired forward speed is obviously required. To achieve this objective, the authors propose to predict the thrust coefficient (KT), torque coefficient (KQ) and efficiency (η) of the propeller in open-water model test condition using Computational Fluid Dynamics (CFD) simulation approach. The computational simulation presented in the various number of rotational speed (RPM) within the range of advance ratio J=0.1 up to 1.05. The higher value of J lead to decrease 10KQ and KT. While the η increased steadily at the lower value of J and decreased at the higher value of J. The results also showed that the propeller with 1048 rpm obtain a better efficiency at J=0.95 with η= 88.25%, 10KQ=0.1654 and KT= 0.0942. The computation result is very useful as preliminary data for propeller performance characteristics.

scholarly journals The Efficient Application of an Impulse Source Wavemaker to CFD Simulations

2019 ◽  
Author(s):  
Pál Schmitt ◽  
Christian Windt ◽  
Josh Davidson ◽  
John V. Ringwood ◽  
Trevor Whittaker
Keyword(s):  
Shallow Water ◽  
Source Function ◽  
Cfd Simulation ◽  
Navier Stokes ◽  
Cfd Simulations ◽  
Wide Range ◽  
Rans Models ◽  
Hydrodynamic Processes ◽  
Computational Fluid Dynamics Cfd ◽  
Shallow Water Models

Computational Fluid Dynamics (CFD) simulations, based on Reynolds Averaged Navier Stokes (RANS) models, are a useful tool for a wide range of coastal and offshore applications, providing a high fidelity representation of the underlying hydrodynamic processes. Generating input waves in the CFD simulation is performed by a numerical wavemaker (NWM), with a variety of different NWM methods existing for this task. While NWMs, based on impulse source methods, have been widely applied for wave generation in depth averaged, shallow water models, they have not seen the same level of adoption in the more general RANS based CFD simulations, due to difficulties in relating the required impulse source function to the resulting free surface elevation for non-shallow water cases. This paper presents an implementation of an impulse source wavemaker, which is able to self-calibrate the impulse source function to produce a desired wave series in deep or shallow water at a specific point in time and space. Example applications are presented, for a numerical wave tank (NWT), based on the opensource CFD software OpenFOAM, for wave packets in deep and shallow water, highlighting the correct calibration of phase and amplitude. Also, the suitability for cases requiring very low reflection from NWT boundaries is demonstrated. Possible issues in the use of the method are discussed and guidance for good application is given.

CFD Simulation of Slug Dissipation in an Enlarged Impacting Tee

2019 ◽  
Author(s):  
Mobina Mohammadikharkeshi ◽  
Mazdak Parsi ◽  
Ramin Dabirian ◽  
Ram S. Mohan ◽  
Ovadia Shoham
Keyword(s):  
Experimental Data ◽  
Void Fraction ◽  
Cfd Simulation ◽  
Petroleum Industry ◽  
Production Operation ◽  
Cfd Simulations ◽  
Ansys Fluent ◽  
Transient Model ◽  
Diameter Pipe ◽  
Computational Fluid Dynamics Cfd

Abstract Slug flow, which commonly occurs in the petroleum industry, is not always a desired flow pattern due to production operation problems it may cause in pipelines and processing facilities. To mitigate these problems, flow conditioning devices such as multiphase flow manifolds and slug catchers are used, where dissipation of slugs occurs in downward flow or in larger diameter pipe sections. Tee-junctions are important parts of these flow conditioning devices. In this work, Computational Fluid Dynamics (CFD) simulations are conducted using ANSYS/FLUENT 17.2 to investigate slug dissipation in an Enlarged Impacting Tee-Junction (EIT). An Eulerian–Eulerian MultiFluid VOF transient model in conjunction with the standard k-ε turbulent model is used to simulate slug dissipation in an EIT geometry. The EIT consists of a 0.05 m ID 10 m long inlet, which is connected to the center of a 0.074 m ID 5.5 m long section that forms the EIT branches. Moreover, experimental data are acquired on slug dissipation lengths in a horizontal EIT with a similar geometry as in the CFD simulations. The CFD results include the mean void fraction and cross-sectionally averaged void fraction time series in the EIT for different gas and liquid velocities. These results provide the inlet slug length and dissipation length in the EIT branches. The CFD results are evaluated against the experimental data demonstrating that the slug dissipation occurring in EIT branches can be predicted by simulation.

CFD Simulation of Segregation in Particulate Multiphase Flows With Binary Solids

2005 ◽  
Author(s):  
Zuoxin Hao
Keyword(s):  
Multiphase Flow ◽  
Cfd Simulation ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Primary Objective ◽  
Cfd Simulations ◽  
Separation Processes ◽  
Solid Mixture ◽  
Computational Fluid Dynamics Cfd ◽  
Realistic Prediction

Segregation in particulate multiphase flow with binary solid mixture has extensive applications in industrial separation processes. Up to now there have been few attempts towards numerical simulation of segregation in particulate multiphase flow with binary mixture due to complexity of the problem. In view of this, the primary objective of present work is to simulate the problem by computational fluid dynamics (CFD) and to validate by comparison with experimental measurements. Eulerian-Eulerian approach, incorporating the granular temperature, an essential ingredient in the solids pressure and solids viscosity formulation, was used to model the flow field of multiphase flow and was solved by Fluent 6.0. The CFD simulation results have been validated by experiments of liquid fluidization of binary solid mixtures. Validation results show that CFD simulation predict segregation and solid volume fraction profile precisely, and in addition, it can supply a more realistic prediction of other hydrodynamic features of the multiphase flow, such as velocity vector of all phases and pressure drop. The success of such CFD simulations opens doors for many potential studies.

CFD and Experimental Analysis of Centrifugal Fans With Forward Curved Blades Used in Electric Motors

2019 ◽  
Author(s):  
S. S. Borges
Keyword(s):  
Cfd Simulation ◽  
Experimental Tests ◽  
Performance Comparison ◽  
Centrifugal Fan ◽  
Electric Motors ◽  
Cfd Simulations ◽  
Interface Models ◽  
Ansys Cfx ◽  
Centrifugal Fans ◽  
Computational Fluid Dynamics Cfd

Abstract This work presents an analysis of the aerodynamic performance of a centrifugal fan with forward curved blades (Sirocco) applied to electric motors. In this analysis were carried out computational fluid dynamics (CFD) simulations and experimental tests for comparison of results. The focus of this analysis is the performance comparison among three different models of general connection interface that are required for the connection between the grids of the rotating and stationary domains of CFD simulation, considering the method adopted by the Ansys CFX, software used as computational tool. Thereby, Frozen Rotor, Stage, and Transient Rotor-Stator were the interface models evaluated. For comparison reference, the experimental data were used to evaluate the performance of each interface models for overall operating range of the fan.

scholarly journals AP-IO: Asynchronous Pipeline I/O for Hiding Periodic Output Cost in CFD Simulation

2014 ◽  
Vol 2014 ◽  
pp. 1-12
Author(s):  
Ren Xiaoguang ◽  
Xu Xinhai
Keyword(s):  
Cfd Simulation ◽  
Massively Parallel ◽  
Optimization Scheme ◽  
Total Execution Time ◽  
Cfd Simulations ◽  
Computational Fluid Dynamics Cfd ◽  
Application Characteristics ◽  
Asynchronous Pipeline ◽  
User Friendly ◽  
Parallel Cfd

Computational fluid dynamics (CFD) simulation often needs to periodically output intermediate results to files in the form of snapshots for visualization or restart, which seriously impacts the performance. In this paper, we present asynchronous pipeline I/O (AP-IO) optimization scheme for the periodically snapshot output on the basis of asynchronous I/O and CFD application characteristics. InAP-IO, dedicated background I/O processes or threads are in charge of handling the file write in pipeline mode, therefore the write overhead can be hidden with more calculation than classic asynchronous I/O. We design the framework ofAP-IOand implement it in OpenFOAM, providing CFD users with a user-friendly interface. Experimental results on theTianhe-2supercomputer demonstrate thatAP-IOcan achieve a good optimization effect for the periodical snapshot output in CFD application, and the effect is especially better for massively parallel CFD simulations, which can reduce the total execution time up to about 40%.

Sign in / Sign up

Export Citation Format

Share Document