scholarly journals Cast-in-situ piles encasements based on oil-bituminous rocks (kirs) in saline soils

2021 ◽  
Vol 30 (1) ◽  
pp. 51-61
Author(s):  
Bulat Unaibayev ◽  
Violetta Andreyachshenko
Keyword(s):  
Pile Foundation ◽  
Lower Cost ◽  
Elevated Temperatures ◽  
Saline Soils ◽  
Natural Bitumen ◽  
Mechanical Grinding ◽  
Aqueous Salt Solutions ◽  
Small Parts

A technology of building a pile foundation in saline soils with a protective and load-bearing shell based on bituminous rocks (kirs) is proposed that makes it possible to eliminate water permeability, to increase suffusion resistance and bearing capacity of the soil, as well as durability. The method of extracting natural bitumen from bituminous rocks (kirs) is based on the ability of kirs to self-grind or disintegrate into small parts at elevated temperatures in aqueous salt solutions. The proposed method excludes mechanical grinding and allows reducing the consumption of reagents and improving the quality of extracted natural bitumen. The compositions of the obtained mastics based on natural bitumen are not inferior in their properties to the known compositions of waterproofing cold mastics based on industrial bitumen at a lower cost.

scholarly journals Research on Corrosion Damage and Bearing Characteristics of Bridge Pile Foundation Concrete under a Dry-Wet-Freeze-Thaw Cycle

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Zhongju Feng ◽  
Jianwei Huo ◽  
Haibo Hu ◽  
Ruixin Zhao ◽  
Fuchun Wang ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Pile Foundation ◽  
Loss Rate ◽  
Corrosion Damage ◽  
In Situ Test ◽  
Freeze Thaw ◽  
Thaw Cycle ◽  
Freeze Thaw Cycle

This study investigated the corrosion damage and bearing characteristics of bridge pile foundations under a dry-wet-freeze-thaw cycle of composite salt in an alpine salt marsh area using an in situ test, laboratory test, and numerical simulations. The in situ test showed that the dry-wet-freeze-thaw cycle has little effect on the quality of the concrete specimens and rebar. The area of the rebar at a depth of 0.25 m had the highest corrosion rate of 91%. The application of epoxy resin on the surface improved erosion resistance. After one year of outdoor dry-wet-freeze-thaw cycle test, due to the interaction of compound salts, the quality of specimens is reduced under the denudation of chloride ions, while the mass of specimens is increased by the corrosion products formed under the joint action of carbonate and sulfate, resulting in less obvious change of specimen quality, the antierosion coefficient of the specimens decreased, the maximum loss rate of compressive strength was 38.2%, and the pile foundation began to deteriorate. The laboratory test showed that expansive substances, such as Friedel salt, appeared in the concrete specimens of pile foundation during 225 cycles of dry-wet-freeze-thaw cycles, the relative dynamic elastic modulus was reduced by 60.9%, the antierosion coefficient was reduced to 0.51, and the compressive strength loss rate was 65.9%. As such, the pile foundation was seriously damaged. The numerical simulation shows that, with an increase of the peeling thickness and the corrosion depth, the bearing capacity of the pile foundation will gradually decrease after 8 years. Without maintenance, the bearing capacity of a pile foundation will decrease by 34.45% in the 20th year.

Electron and ion irradiation-induced dissolution of mechanical twins in the intermetalic U3Si: An in situ HVEM study

1989 ◽  
Vol 47 ◽  
pp. 652-653
Author(s):  
Charles W. Allen ◽  
Robert C. Birtcher
Keyword(s):  
Elevated Temperatures ◽  
Ion Irradiation ◽  
Ion Beam ◽  
National Laboratory ◽  
Argonne National Laboratory ◽  
Heavy Ion ◽  
High Energy ◽  
Mechanical Twinning ◽  
In Situ Experiments

The uranium silicides, including U3Si, are under study as candidate low enrichment nuclear fuels. Ion beam simulations of the in-reactor behavior of such materials are performed because a similar damage structure can be produced in hours by energetic heavy ions which requires years in actual reactor tests. This contribution treats one aspect of the microstructural behavior of U3Si under high energy electron irradiation and low dose energetic heavy ion irradiation and is based on in situ experiments, performed at the HVEM-Tandem User Facility at Argonne National Laboratory. This Facility interfaces a 2 MV Tandem ion accelerator and a 0.6 MV ion implanter to a 1.2 MeV AEI high voltage electron microscope, which allows a wide variety of in situ ion beam experiments to be performed with simultaneous irradiation and electron microscopy or diffraction.At elevated temperatures, U3Si exhibits the ordered AuCu3 structure. On cooling below 1058 K, the intermetallic transforms, evidently martensitically, to a body-centered tetragonal structure (alternatively, the structure may be described as face-centered tetragonal, which would be fcc except for a 1 pet tetragonal distortion). Mechanical twinning accompanies the transformation; however, diferences between electron diffraction patterns from twinned and non-twinned martensite plates could not be distinguished.

The threshold energy for atom displacement in fcc metals

1990 ◽  
Vol 48 (4) ◽  
pp. 530-531
Author(s):  
Wilfried Sigle ◽  
Matthias Hohenstein ◽  
Alfred Seeger
Keyword(s):  
Growth Rate ◽  
Elevated Temperatures ◽  
Threshold Energy ◽  
Dislocation Loops ◽  
Absolute Minimum ◽  
Voltage Electron ◽  
Atom Displacement ◽  
Electron Microscopes ◽  
Fcc Metal

Prolonged electron irradiation of metals at elevated temperatures usually leads to the formation of large interstitial-type dislocation loops. The growth rate of the loops is proportional to the total cross-section for atom displacement,which is implicitly connected with the threshold energy for atom displacement, Ed . Thus, by measuring the growth rate as a function of the electron energy and the orientation of the specimen with respect to the electron beam, the anisotropy of Ed can be determined rather precisely. We have performed such experiments in situ in high-voltage electron microscopes on Ag and Au at 473K as a function of the orientation and on Au as a function of temperature at several fixed orientations.Whereas in Ag minima of Ed are found close to <100>,<110>, and <210> (13-18eV), (Fig.1) atom displacement in Au requires least energy along <100>(15-19eV) (Fig.2). Au is thus the first fcc metal in which the absolute minimum of the threshold energy has been established not to lie in or close to the <110> direction.

Pengaruh Jenis Co-Solvent terhadap Rendemen dan Mutu Biodiesel secara Transesterifikasi In Situ Menggunakan Radiasi Gelombang Mikro

2016 ◽  
Vol 10 (2) ◽  
pp. 119-126
Author(s):  
Mahlinda Mahlinda ◽  
Fitriana Djafar
Keyword(s):  
Catalyst Concentration ◽  
Maximum Yield ◽  
Acid Value ◽  
Experimental Result ◽  
In Situ Transesterification ◽  
Yield And Quality ◽  
Solvent Type ◽  
Biodiesel Quality

The main purpose of this research was to observer effect co-solvent type (n-Hexane, chloroform and without co-solvent)  toward yield and quality of biodiesel via in situ transesterification process using microwave irradiation. The process was studied at microwave power 450 watt, reaction time 4 minutes, methanol to seed ratio 25:1 and catalyst concentration 5%. The physicochemical parameters of the biodiesel produced such as viscosity, density and acid value were analysed and compared with the SNI 7182-2012 standard. The experimental result showed the maximum yield biodiesel 78,32% obtained by using co-solvent chloroform.Test result of physicochemical properties (viscosity, density and acid value) of biodiesel products using co solvent n-Hexane, chloroform and without co solvent showed that these products conform to the SNI 7182-2012 standars. The type of co-solvent only affectedon biodiesel yield dan not affected on biodiesel quality (viscosity, density and acid value).  ABSTRAKTujuan penelitian ini adalah untuk mempelajari pengaruh jenis co-solvent (n-Hexane, chloroform dan tanpa co-solvent) terhadap rendemen dan mutu biodiesel secara trasesterifikasi in situ menggunakan radiasi gelombang mikro. Proses dilakukan pada daya gelombang mikro 450 watt, waktu reaksi 4 menit, perbandingan berat metanol terhadap bahan baku 25:1 dan jumlah katalis 5%. Parameter fisiko kimia dari produk biodiesel seperti viskositas, densitas dan angka asam di analisa dan dibandingkan dengan standar SNI 7182-2012 tentang biodiesel. Hasil penelitian menunjukkan rendemen maksimum biodiesel sebesar 78,32% diperoleh dengan menggunakan co-solvent chloroform. Hasil pengujian  karakteristik fisiko kimia (viskositas, densitas dan angka asam) dari produk biodiesel menggunakan co-solvent n-Hexane, chloroform dan tanpa co-solvent menunjukkan bahwa semua parameter ini masih memenuhi standar SNI 1782-2012 tentang biodiesel. Jenis co-solvent hanya berpengaruh pada rendemen biodiesel dan tidak berpengaruh terhadap mutu biodiesel (viskositas, densitas dan bilangan asam).Kata kunci: co-solvent, in situ transesterifikasi, microwave, rendemen, mutu   

Estudio del proceso de lavado de contenedores para eliminar tiempos y movimientos innecesarios, caso: Wash Containers S.A de C.V.

2020 ◽  
pp. 25-36
Author(s):  
Juan Alfredo Lino-Gamiño ◽  
Carlos Méndez-González ◽  
Eduardo José Salazar-Araujo ◽  
Pablo Adrián Magaña-Sánchez
Keyword(s):  
Business Process ◽  
Value Chain ◽  
Process Management ◽  
Core Business ◽  
The Core ◽  
Washing Process ◽  
Overall Performance ◽  
The Times

In the value chain it is important to keep in mind the core business of the company, since it depends largely on the competitiveness of the company and its overall performance, bearing in mind that all business indicators depend on it. In this work we will study the washing process within the company WASH CONTAINERS SA DE CV, to improve the washing processes and in this way reduce times and movements in the process leading the company to reduce costs considerably within the operations company daily, having a more competitive operation and with greater profit margin in its business process. Goals: It Improve the logistics of the movement of containers for washing and with it the core business of the company. Methodology: The action research will be applied applying Business Process Management for the improvement of processes in situ, it will be developed in a certain period of time and with that it will establish an improvement projection. Contribution: The improvement of the times for the disposal of the containers and their subsequent use, allows a better competitiveness and with it the income of the company, on the other hand, the transport companies improve in performance in quantity, quality of disposition and with it their income.

scholarly journals Modelling the Quality of Bathing Waters in the Adriatic Sea

Water ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1525
Author(s):  
Christian Ferrarin ◽  
Pierluigi Penna ◽  
Antonella Penna ◽  
Vedrana Spada ◽  
Fabio Ricci ◽  
...  
Keyword(s):  
Adriatic Sea ◽  
Management Tool ◽  
Negative Consequences ◽  
Sea Temperature ◽  
Bathing Water Directive ◽  
Bathing Waters ◽  
Diffusion Dynamics ◽  
Study Sites

The aim of this study is to develop a relocatable modelling system able to describe the microbial contamination that affects the quality of coastal bathing waters. Pollution events are mainly triggered by urban sewer outflows during massive rainy events, with relevant negative consequences on the marine environment and tourism and related activities of coastal towns. A finite element hydrodynamic model was applied to five study areas in the Adriatic Sea, which differ for urban, oceanographic and morphological conditions. With the help of transport-diffusion and microbial decay modules, the distribution of Escherichia coli was investigated during significant events. The numerical investigation was supported by detailed in situ observational datasets. The model results were evaluated against water level, sea temperature, salinity and E. coli concentrations acquired in situ, demonstrating the capacity of the modelling suite in simulating the circulation in the coastal areas of the Adriatic Sea, as well as several main transport and diffusion dynamics, such as riverine and polluted waters dispersion. Moreover, the results of the simulations were used to perform a comparative analysis among the different study sites, demonstrating that dilution and mixing, mostly induced by the tidal action, had a stronger effect on bacteria reduction with respect to microbial decay. Stratification and estuarine dynamics also play an important role in governing microbial concentration. The modelling suite can be used as a beach management tool for improving protection of public health, as required by the EU Bathing Water Directive.

In Situ Polymerized Protic Ionogels for Fuel Cells at Elevated Temperatures

2021 ◽  
Author(s):  
Mengdou Zou ◽  
Jie Luo ◽  
Xurui Wang ◽  
Shuai Tan ◽  
Caihong Wang ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Elevated Temperatures

scholarly journals Chlorosulfuric acid-assisted production of functional 2D materials

2021 ◽  
Vol 5 (1) ◽  
Author(s):  
Mohsen Moazzami Gudarzi ◽  
Maryana Asaad ◽  
Boyang Mao ◽  
Gergo Pinter ◽  
Jianqiang Guo ◽  
...  
Keyword(s):  
Hexagonal Boron Nitride ◽  
2D Materials ◽  
Real Life ◽  
Large Area ◽  
Polar Solvents ◽  
Aspect Ratios ◽  
Two Dimensional Materials ◽  
Liquid Phase Exfoliation

AbstractThe use of two-dimensional materials in bulk functional applications requires the ability to fabricate defect-free 2D sheets with large aspect ratios. Despite huge research efforts, current bulk exfoliation methods require a compromise between the quality of the final flakes and their lateral size, restricting the effectiveness of the product. In this work, we describe an intercalation-assisted exfoliation route, which allows the production of high-quality graphene, hexagonal boron nitride, and molybdenum disulfide 2D sheets with average aspect ratios 30 times larger than that obtained via conventional liquid-phase exfoliation. The combination of chlorosulfuric acid intercalation with in situ pyrene sulfonate functionalisation produces a suspension of thin large-area flakes, which are stable in various polar solvents. The described method is simple and requires no special laboratory conditions. We demonstrate that these suspensions can be used for fabrication of laminates and coatings with electrical properties suitable for a number of real-life applications.

scholarly journals Sounding out falsified medicines from genuine medicines using Broadband Acoustic Resonance Dissolution Spectroscopy (BARDS)

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Anas Alfarsi ◽  
Céline Caillet ◽  
Garry Fawbert ◽  
Simon Lawrence ◽  
Jacob Krüse ◽  
...  
Keyword(s):  
Active Ingredient ◽  
Lower Cost ◽  
Principal Component ◽  
Acoustic Resonance ◽  
South East Asia ◽  
Acoustic Signatures ◽  
Falsified Medicines ◽  
Acoustic Phenomenon ◽  
The Eu

AbstractThe trade in falsified medicine has increased significantly and it is estimated that global falsified sales have reached $100 billion in 2020. The EU Falsified Medicines Directive states that falsified medicines do not only reach patients through illegal routes but also via the legal supply chain. Falsified medicines can contain harmful ingredients. They can also contain too little or too much active ingredient or no active ingredient at all. BARDS (Broadband Acoustic Resonance Dissolution Spectroscopy) harnesses an acoustic phenomenon associated with the dissolution of a sample (tablet or powder). The resulting acoustic spectrum is unique and intrinsic to the sample and can be used as an identifier or signature profile. BARDS was evaluated in this study to determine whether a product is falsified or genuine in a rapid manner and at lower cost than many existing technologies. A range of genuine and falsified medicines, including falsified antimalarial tablets from south-east Asia, were tested, and compared to their counterpart genuine products. Significant differences between genuine and falsified doses were found in their acoustic signatures as they disintegrate and dissolve. Principal component analysis was employed to differentiate between the genuine and falsified medicines. This demonstrates that the tablets and capsules included here have intrinsic acoustic signatures which could be used to screen the quality of medicines.

Sign in / Sign up

Export Citation Format

Share Document