scholarly journals Biochemical composition of the horse chestnut seed (Aesculus hippocastanum L.)

2011 ◽  
Vol 63 (2) ◽  
pp. 345-351 ◽  
Author(s):  
Jelena Cukanovic ◽  
Jelena Ninic-Todorovic ◽  
V. Ognjanov ◽  
Emina Mladenovic ◽  
Mirjana Ljubojevic ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Urban Areas ◽  
Biochemical Composition ◽  
Aesculus Hippocastanum ◽  
Horse Chestnut ◽  
High Grade ◽  
Statistical Parameters ◽  
Reproductive Material ◽  
Horse Chestnut Seed ◽  
Novi Sad

This study presents research on the chemical composition of 15 horse chestnut seed genotypes (Aesculus hippocastanum L.) conducted on three different sites. The seeds were picked from selected trees in Backa Palanka, Novi Sad and Sremski Karlovci at the end of September 2010. The statistical parameters point out the variables of the examined features of the seed. On the basis of the moisture, starch, fat and protein contents in the horse chestnut seeds, the genotypes, the reproductive material which would be used for the intensive production of the high grade seedlings for the greening of the different area categories in urban areas, are distinguished.

scholarly journals The condition of Aesculus hippocastanum L. trees in the avenues of the central part of the city of Obrenovac

2014 ◽  
pp. 17-23
Author(s):  
Milorad Veselinović ◽  
Suzana Mitrović ◽  
Zlatan Radulović ◽  
Dragana Dražić ◽  
Nevena Čule ◽  
...  
Keyword(s):  
Urban Areas ◽  
The State ◽  
Aesculus Hippocastanum ◽  
Horse Chestnut ◽  
Anthropogenic Influences ◽  
State Of Health ◽  
Tree Line ◽  
Individual Trees ◽  
The City ◽  
Morphology Characteristics

In urban areas treelined paths are the most vulnerable element. According expected functions treelined paths in certain street are unsatisfactory with their appearance and general condition. These are primarily biological, ecological, sociological and aesthetic functions. Because of negative anthropogenic influences trees are with low level condition, very low functionality and the unsatisfactory state of health. Most of the trees exist in very difficult circumstances of streets, there are crowded in the underground and in the aboveground part. In such circumstances, just as individual specimens of trees grow into individuals who manifest themselves in terms of morphology characteristics which are representative of its species. In this paper is presented the state of the avenue of horse chestnut (Aesculus hippocastanum L.) in two central streets of the old part of Obrenovca. The data were analyzed on the basis of the reviewed every tree and with the particular assessing the state of the crown and the state of the trunk. Based on the analysis of the results measures are proposed for the rehabilitation of individual trees as well as measures for the reconstruction of the entire tree line.

scholarly journals The Influence of Urban Conditions on the Phenology of Aesculus hippocastanum L. Using the Example of Wroclaw (Poland)

Forests ◽  
2020 ◽  
Vol 11 (12) ◽  
pp. 1261
Author(s):  
Iwona Dominika Orzechowska-Szajda ◽  
Robert Krzysztof Sobolewski ◽  
Joanna Lewandowska ◽  
Paulina Kowalska ◽  
Robert Kalbarczyk
Keyword(s):  
Land Cover ◽  
Urban Space ◽  
Urban Areas ◽  
Negative Impact ◽  
Vegetation Period ◽  
Aesculus Hippocastanum ◽  
Horse Chestnut ◽  
City Center ◽  
The Impact ◽  
The City

The differences in plant phenology between rural and urban areas are the subject of research conducted all over the world. There are few studies aimed at assessing the impact of the urban heat island on plant vegetation only in urban areas. The aim of this study is to assess the impact of the distance from the city center and the form of land cover on the phenological development of trees using the example of the horse chestnut (Aesculus hippocastanum L.). The research area covered the entire city of Wrocław. In order to best capture the impact of the distance from the city center on the rate of changes of individual phenophases, 3 areas were designated—at a distance of 1 km, 2 km and 5 km. The study assessed the average duration of individual phenological phases along with the variability characteristics for leafing, flowering and fruiting in relation to the designated zones and classified forms of land cover based on mean value (x¯) and standard deviation (±SD) in individual weeks of the year. For the leafing and flowering phases, the frequency of the occurrence of phases in individual weeks of the year was analyzed in relation to the designated zones and classified land use methods. The results obtained on the basis of phenological observations carried out in 2017 in Wrocław confirmed the extension of the period of vegetation in the city center in relation to its peripheries. Trees growing in road lanes entered the vegetation period later and defoliated faster, which confirms the negative impact of street conditions on the development of trees in urban space. Thus, the growing season in road lanes is shorter and due to the 1-year observation period, it is justified to conduct further observations.

scholarly journals Analytical Concentrations of Some Elements in Seeds and Crude Extracts from Aesculus hippocastanum, by ICP-OES Technique

Agronomy ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 47
Author(s):  
Caterina Durante ◽  
Marina Cocchi ◽  
Lisa Lancellotti ◽  
Laura Maletti ◽  
Andrea Marchetti ◽  
...  
Keyword(s):  
Inductively Coupled Plasma ◽  
Research Work ◽  
Principal Component ◽  
Aesculus Hippocastanum ◽  
Horse Chestnut ◽  
Icp Oes ◽  
Wild Type ◽  
Commercial Sample ◽  
Pure Species ◽  
Crude Extracts

The metal content in some samples of horse chestnut seeds (Aesculus hippocastanum) was monitored over time (years 2016–2019) considering the two most common and representative Mediterranean varieties: the pure species (AHP, which gives white flowers) and a hybrid one (AHH, which gives pink flowers). The selected elemental composition of the samples was determined by applying the Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) technique. Several samples obtained from different preliminary treatments of the peeled seeds were examined, such as: (i) floury samples (wild-type) mineralized with the wet method; (ii) the ashes of both AHP and AHH varieties; (iii) the fraction of total inorganic soluble salts (TISS). Furthermore, the hydroalcoholic crude extracts (as a tincture) were obtained according to the official Pharmacopoeia methods, and the relevant results were compared with those of a commercial sample, an herbal product-food supplement of similar characteristics. The main characteristics of this research work underline that the two botanical varieties give different distinctive characters, due to the Fe content (80.05 vs. 1.42 mg/100 g d.s., for AHP and AHH wild-type flour samples, respectively), along with K, Ca, Mn, Ni and Cu, which are more abundant in the AHP samples. Furthermore, the Principal Component Analysis (PCA) was applied to the experimental dataset in order to classify and discriminate the samples, in relation to their similar botanical origin, but different for the color of the bloom. These results can be useful for the traceability of raw materials potentially intended for the production of auxiliary systems of pharmacological interest.

scholarly journals Volcanic Ash as a Sustainable Binder Material: An Extensive Review

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1302
Author(s):  
Andrés Játiva ◽  
Evelyn Ruales ◽  
Miren Etxeberria
Keyword(s):  
Chemical Composition ◽  
Portland Cement ◽  
Urban Areas ◽  
Volcanic Ash ◽  
Mechanical Performance ◽  
Cement Clinker ◽  
Alkali Activation ◽  
Cement Production ◽  
Sustainable Solutions ◽  
Alkali Activated

The construction industry is affected by the constant growth in the populations of urban areas. The demand for cement production has an increasing environmental impact, and there are urgent demands for alternative sustainable solutions. Volcanic ash (VA) is an abundant low-cost material that, because of its chemical composition and amorphous atomic structure, has been considered as a suitable material to replace Portland cement clinker for use as a binder in cement production. In the last decade, there has been interest in using alkali-activated VA material as an alternative material to replace ordinary Portland cement. In this way, a valuable product may be derived from a currently under-utilized material. Additionally, alkali-activated VA-based materials may be suitable for building applications because of their good densification behaviour, mechanical properties and low porosity. This article describes the most relevant findings from researchers around the world on the role of the chemical composition and mineral contents of VA on reactivity during the alkali-activation reaction; the effect of synthesis factors, which include the concentration of the alkaline activator, the solution-to-binder ratio and the curing conditions, on the properties of alkali-activated VA-based materials; and the mechanical performance and durability properties of these materials.

Effect of 3D printer enabled surface morphology and composition on coral growth in artificial reefs

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ilse Valenzuela Matus ◽  
Jorge Lino Alves ◽  
Joaquim Góis ◽  
Augusto Barata da Rocha ◽  
Rui Neto ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Chemical Composition ◽  
Chemical Elements ◽  
Three Dimensional ◽  
Coral Growth ◽  
Coralline Algae ◽  
Textured Surface ◽  
Crustose Coralline Algae ◽  
Statistical Parameters ◽  
Content Type

Purpose The purpose of this paper is to prove and qualify the influence of textured surface substrates morphology and chemical composition on the growth and propagation of transplanted corals. Use additive manufacturing and silicone moulds for converting three-dimensional samples into limestone mortar with white Portland cement substrates for coral growth. Design/methodology/approach Tiles samples were designed and printed with different geometries and textures inspired by nature marine environment. Commercial coral frag tiles were analysed through scanning electron microscopy (SEM) to identify the main chemical elements. Raw materials and coral species were selected. New base substrates were manufactured and deployed into a closed-circuit aquarium to monitor the coral weekly evolution process and analyse the results obtained. Findings Experimental results provided positive statistical parameters for future implementation tests, concluding that the intensity of textured surface, interfered favourably in the coralline algae biofilm growth. The chemical composition and design of the substrates were determinant factors for successful coral propagation. Recesses and cavities mimic the natural rocks aspect and promoted the presence and interaction of other species that favour the richness of the ecosystem. Originality/value Additive manufacturing provided an innovative method of production for ecology restoration areas, allowing rapid prototyping of substrates with high complexity morphologies, a critical and fundamental attribute to guarantee coral growth and Crustose Coralline Algae. The result of this study showed the feasibility of this approach using three-dimensional printing technologies.

Guignardia aesculi. [Distribution map].

1995 ◽  
Author(s):  
Keyword(s):  
North America ◽  
Geographical Distribution ◽  
Aesculus Hippocastanum ◽  
Horse Chestnut ◽  
Distribution Map ◽  
New Distribution ◽  
Distribution In Europe

Abstract A new distribution map is provided for Guignardia aesculi (Peck) V.B. Stewart. Hosts: horse chestnut (Aesculus hippocastanum) and other Aesculus spp. Information is given on the geographical distribution in EUROPE, Austria, Belgium, France, Germany, Italy, Netherlands, Portugal, Romania, Switzerland, UK, Yugoslavia, NORTH AMERICA, Canada, USA.

scholarly journals Population genetic characteristics of horse chestnut in Serbia

2013 ◽  
Vol 65 (1) ◽  
pp. 1-7 ◽  
Author(s):  
Mirjana Ocokoljic ◽  
Dragica Vilotic ◽  
Mirjana Sijacic-Nikolic
Keyword(s):  
Population Genetic ◽  
Genetic Parameters ◽  
Individual Variability ◽  
Horse Chestnut ◽  
Statistical Parameters ◽  
Genetic Characteristics ◽  
Different Populations ◽  
Growth Phenotype ◽  
Population Genetic Parameters ◽  
Cultivated Populations

The general population genetic characteristics of cultivated horse chestnut trees excelling in growth, phenotype characteristics, type of inflorescence, productivity and resistance to the leafminer Cameraria ohridella Deschka and Dimic were analyzed in Serbia. The analyzed population genetic parameters point to fundamental differences in the genetic structure among the cultivated populations in Serbia. The study shows the variability in all properties among the populations and inter-individual variability within the populations. The variability and differential characteristics were assessed using statistical parameters, taking into account the satisfactory reflection of the hereditary potential. The assessed differences in the vitality and evolution potential of different populations can determine the methods of horse chestnut gene pool collection, reconstruction and improvement.

Sign in / Sign up

Export Citation Format

Share Document