scholarly journals Smart hydrogels based on itaconic acid for biomedical application

2009 ◽  
Vol 63 (6) ◽  
pp. 603-610
Author(s):  
Simonida Tomic ◽  
Maja Micic ◽  
Bojana Krezovic ◽  
Sava Dobic ◽  
Edin Suljovrujic ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Itaconic Acid ◽  
Biomedical Applications ◽  
Biomedical Application ◽  
In Vitro Study ◽  
Mechanical Analysis ◽  
Wound Dressings ◽  
Temperature Sensitive ◽  
Stimuli Responsive

pH and temperature sensitive hydrogels, based on 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA) copolymers, were prepared by gamma irradiation and characterized in order to examine their potential use in biomedical applications. The influence of comonomer ratio in these smart copolymers on their morphology, mechanical properties, biocompatibility and microbe penetration capability was investigated. The mechanical properties of copolymers were investigated using the dynamic mechanical analysis (DMA), while their morphology was examined by scanning electron microscopy (SEM). The morphology and mechanical properties of these hydrogels were found to be suitable for most requirements of biomedical applications. The in vitro study of P(HEMA/IA) biocompatibility showed no evidence of cell toxicity nor any considerable hemolytic activity. Furthermore, the microbe penetration test showed that neither Staphylococcus aureus nor Escherichia coli passed through the hydogel dressing; thus the P(HEMA/IA) dressing could be considered a good barrier against microbes. All results indicate that stimuli-responsive P(HEMA/IA) hydrogels have great potential for biomedical applications, especially for skin treatment and wound dressings.

Cellulose Nanofibrils-based Hydrogels for Biomedical Applications: Progresses and Challenges

2020 ◽  
Vol 27 (28) ◽  
pp. 4622-4646 ◽  
Author(s):  
Huayu Liu ◽  
Kun Liu ◽  
Xiao Han ◽  
Hongxiang Xie ◽  
Chuanling Si ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Metal Ion ◽  
Biomedical Applications ◽  
Biomedical Application ◽  
Cellulose Nanofibrils ◽  
Wound Dressings ◽  
Preparation Methods ◽  
Tissue Scaffold ◽  
Surface Areas ◽  
Mechanical Methods

Background: Cellulose Nanofibrils (CNFs) are natural nanomaterials with nanometer dimensions. Compared with ordinary cellulose, CNFs own good mechanical properties, large specific surface areas, high Young's modulus, strong hydrophilicity and other distinguishing characteristics, which make them widely used in many fields. This review aims to introduce the preparation of CNFs-based hydrogels and their recent biomedical application advances. Methods: By searching the recent literatures, we have summarized the preparation methods of CNFs, including mechanical methods and chemical mechanical methods, and also introduced the fabrication methods of CNFs-based hydrogels, including CNFs cross-linked with metal ion and with polymers. In addition, we have summarized the biomedical applications of CNFs-based hydrogels, including scaffold materials and wound dressings. Results: CNFs-based hydrogels are new types of materials that are non-toxic and display a certain mechanical strength. In the tissue scaffold application, they can provide a micro-environment for the damaged tissue to repair and regenerate it. In wound dressing applications, it can fit the wound surface and protect the wound from the external environment, thereby effectively promoting the healing of skin tissue. Conclusion: By summarizing the preparation and application of CNFs-based hydrogels, we have analyzed and forecasted their development trends. At present, the research of CNFs-based hydrogels is still in the laboratory stage. It needs further exploration to be applied in practice. The development of medical hydrogels with high mechanical properties and biocompatibility still poses significant challenges.

Structure, Microstructure, and Selected Mechanical Properties of Ti-Zr-Mo Alloys for Biomedical Applications

2014 ◽  
Vol 922 ◽  
pp. 75-80 ◽  
Author(s):  
Diego Rafael Nespeque Correa ◽  
Pedro Akira Bazaglia Kuroda ◽  
Carlos Roberto Grandini
Keyword(s):  
Mechanical Properties ◽  
Young’S Modulus ◽  
Biomedical Applications ◽  
Biomedical Application ◽  
Young's Modulus ◽  
Microstructural Analysis ◽  
Melting Furnace ◽  
High Hardness ◽  
Mechanical Analysis ◽  
Β Phase

New titanium alloys for biomedical applications have been developed primarily with the addition of Nb, Ta, Mo, and Zr, because those elements stabilize the β phase and they don’t cause cytotoxicity in the organism. The objective of this paper is to analyze the effect of molybdenum on the structure, microstructure, and selected mechanical properties of Ti-15Zr-xMo (x = 5, 10, 15, and 20 wt%) alloys. The samples were produced in an arc-melting furnace with inert argon atmosphere, and they were hot-rolled and homogenized. The samples were characterized using chemical, structural, and microstructural analysis. The mechanical analysis was made using Vickers microhardness and Young’s modulus measurements. The compositions of the alloys were sensitive to the molybdenum concentration, indicating the presence of α’+α”+β phases in the Ti-15Zr-5Mo alloy, α”+β in the Ti-15Zr-10Mo alloy, and β phase in the Ti-15Zr-15Mo and Ti-15Zr-20Mo alloys. The mechanical properties showed favorable values for biomedical application in the alloys presenting high hardness and low Young’s modulus compared with CP-Ti.

scholarly journals An In Vitro Study of Antibacterial Properties of Electrospun Hypericum perforatum Oil-Loaded Poly(lactic Acid) Nonwovens for Potential Biomedical Applications

2021 ◽  
Vol 11 (17) ◽  
pp. 8219
Author(s):  
Ayben Pakolpakçıl ◽  
Zbigniew Draczyński ◽  
Justyna Szulc ◽  
Dawid Stawski ◽  
Nina Tarzyńska ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Biomedical Applications ◽  
Hypericum Perforatum ◽  
Antibacterial Properties ◽  
In Vitro Study ◽  
Nonwoven Fabric ◽  
Wound Dressings ◽  
Poly Lactic Acid ◽  
Ultrafine Fibers

The growth of population and increase in diseases that cause an enormous demand for biomedical material consumption is a pointer to the pressing need to develop new sustainable biomaterials. Electrospun materials derived from green polymers have gained popularity in recent years for biomedical applications such as tissue engineering, wound dressings, and drug delivery. Among the various bioengineering materials used in the synthesis of a biodegradable polymer, poly(lactic acid) (PLA) has received the most attention from researchers. Hypericum perforatum oil (HPO) has antimicrobial activity against a variety of bacteria. This study aimed to investigate the development of an antibacterial sustainable material based on PLA by incorporating HPO via a simple, low-cost electrospinning method. Chemical, morphological, thermal, thickness and, air permeability properties, and in vitro antibacterial activity of the electrospun nonwoven fabric were investigated. Scanning electron microscopy (SEM) was used to examine the morphology of the electrospun nonwoven fabric, which had bead-free morphology ultrafine fibers. Antibacterial tests revealed that the Hypericum perforatum oil-loaded poly(lactic acid) nonwoven fabrics obtained had high antibacterial efficiency against Escherichia coli and Staphylococcus aureus, indicating a strong potential for use in biomedical applications.

scholarly journals Injectable non-leaching tissue-mimetic bottlebrush elastomers as an advanced platform for reconstructive surgery

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Erfan Dashtimoghadam ◽  
Farahnaz Fahimipour ◽  
Andrew N. Keith ◽  
Foad Vashahi ◽  
Pavel Popryadukhin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Reconstructive Surgery ◽  
Biomedical Applications ◽  
The Body ◽  
Surrounding Tissue ◽  
Curing Time ◽  
Materials Used ◽  
Significant Health

AbstractCurrent materials used in biomedical devices do not match tissue’s mechanical properties and leach various chemicals into the body. These deficiencies pose significant health risks that are further exacerbated by invasive implantation procedures. Herein, we leverage the brush-like polymer architecture to design and administer minimally invasive injectable elastomers that cure in vivo into leachable-free implants with mechanical properties matching the surrounding tissue. This strategy allows tuning curing time from minutes to hours, which empowers a broad range of biomedical applications from rapid wound sealing to time-intensive reconstructive surgery. These injectable elastomers support in vitro cell proliferation, while also demonstrating in vivo implant integrity with a mild inflammatory response and minimal fibrotic encapsulation.

A Review of Water-Resistant Cellulose-Based Materials in Pharmaceutical and Biomedical Application

2021 ◽  
Vol 28 ◽  
Author(s):  
Bei He ◽  
Xinxin Liu ◽  
Shi Qi ◽  
Run Zheng ◽  
Minmin Chang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Biomedical Application ◽  
Drug Loading ◽  
Cellulose Fibers ◽  
Dip Coating ◽  
Wound Dressings ◽  
Attractive Alternative ◽  
Natural Polymers ◽  
Insoluble Drugs ◽  
Good Biocompatibility

Background: Cellulose, huge reserves of natural polymers, have been widely applied in pharmaceutical and biomedicine fields due to its good biocompatibility, biodegradability, non-toxicity and excellent mechanical properties. At present, water-resistant metal-based and petroleum-based materials applied in medical field exists obvious problems of poor biocompatibility and high cost. Therefore, water-resistant cellulose-based materials with good biocompatibility and low price will become an attractive alternative. This review aims to summarize the preparation of water-resistant cellulose-based materials and their potential application in pharmaceutical and biomedical in recent years. Methods: Common hydrophobic treatments of cellulose fibers or paper were overviewed. The preparation, properties and applications of water-resistant cellulose-based materials in the pharmaceutical and biomedical fields were summarized. Results: Common hydrophobic treatments of cellulose fibers or paper were divided into chemical modification (graft polymerization, crosslinking, solution casting or dip-coating), physico-chemical surface modifications (plasma treatments, surface patterning, electrostatic spraying and electrowetting) and physical processing (electrostatic spinning, SAS process and 3D EHD printing). These hydrophobically processed cellulose fibers or paper could be prepared into various water-resistant cellulose-based materials and applied in pharmaceutical excipients, drug-loaded amphiphilic micelles, drug-loaded composite fibers, hydrophobic biocomposite film/coatings and paper-based detectors. They presented excellent water resistance and biocompatibility, low cytotoxicity and high drug loading ability, and stable drug release rate, etc., which could be used for water-insoluble drugs carriers, wound dressings, and medical testing equipment. Conclusion: Currently, water-resistant cellulose-based materials were mainly applied in water-insoluble drugs delivery carriers, wound dressing and medical diagnosis and presented great application prospects. However, the contradiction between hydrophobicity and mechanical properties of these reported water-resistant cellulose-based materials limited their wider application in biomedicine such as tissue engineering. In the future, attention will be focused on the higher hydrophobicity of water-resistant cellulose-based materials with excellent mechanical properties. In addition, clinical medical research of water-resistant cellulose-based materials should be strengthened.

scholarly journals Poly(Glycerol Succinate) as an Eco-Friendly Component of PLLA and PLCL Fibres towards Medical Applications

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1731
Author(s):  
Dorota Kolbuk ◽  
Oliwia Jeznach ◽  
Michał Wrzecionek ◽  
Agnieszka Gadomska-Gajadhur
Keyword(s):  
Mechanical Properties ◽  
In Vitro Study ◽  
Medical Applications ◽  
Crystal Formation ◽  
Scanning Calorimetry ◽  
Chain Mobility ◽  
X Ray Scattering ◽  
Crystallisation Behaviour ◽  
Main Component

This study was conducted as a first step in obtaining eco-friendly fibres for medical applications using a synthesised oligomer poly(glycerol succinate) (PGSu) as an additive for synthetic poly(L-lactic acid) (PLLA) and poly (L-lactide-co-caprolactone) (PLCL). The effects of the oligomer on the structure formation, morphology, crystallisation behaviour, and mechanical properties of electrospun bicomponent fibres were investigated. Nonwovens were investigated by means of scanning electron microscopy (SEM), wide angle X-ray scattering (WAXS), differential scanning calorimetry (DSC), and mechanical testing. The molecular structure of PLLA fibres is influenced by the presence of PGSu mainly acting as an enhancer of molecular orientation. In the case of semicrystalline PLCL, chain mobility was enhanced by the presence of PGSu molecules, and the crystallinity of bicomponent fibres increased in relation to that of pure PLCL. The mechanical properties of bicomponent fibres were influenced by the level of PGSu present and the extent of crystal formation of the main component. An in vitro study conducted using L929 cells confirmed the biocompatible character of all bicomponent fibres.

scholarly journals Injectable Non-leaching Tissue-mimetic Bottlebrush Elastomers: A New Platform for Advancing Reconstructive Surgery

2020 ◽  
Author(s):  
Erfan Dashtimoghadam ◽  
Farahnaz Fahimipour ◽  
Andrew Keith ◽  
Foad Vashahi ◽  
Pavel Popryadukhin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Reconstructive Surgery ◽  
Biomedical Applications ◽  
The Body ◽  
Surrounding Tissue ◽  
Curing Time ◽  
Materials Used ◽  
Significant Health

Abstract Current materials used in biomedical devices do not match tissue’s mechanical properties and leach various chemicals into the body. These deficiencies pose significant health risks that are further exacerbated by invasive implantation procedures. Herein, we leverage the brush-like polymer architecture to design and administer minimally invasive injectable elastomers that cure in vivo into leachable-free implants with mechanical properties matching the surrounding tissue. This strategy allows tuning curing time from minutes to hours, which empowers a broad range of biomedical applications from rapid wound sealing to time-intensive reconstructive surgery. These injectable elastomers support in vitro cell proliferation, while also demonstrating in vivo implant integrity with a mild inflammatory response and minimal fibrotic encapsulation.

Sign in / Sign up

Export Citation Format

Share Document