scholarly journals Industrial Water Waste, Problems and the Solution

2004 ◽  
Vol 4 (2) ◽  
Author(s):  
Alif Noor Anna
Keyword(s):  
Water Treatment ◽  
Industrial Development ◽  
Agricultural Sector ◽  
Industrial Sector ◽  
Industrial Water ◽  
Environmental Preservation ◽  
Industrial Chain ◽  
Different Characteristics ◽  
Water Waste

Recently, the long term development in Indonesia has changed agricultural sector to the industrial sector. This development can apparently harm our own people. This is due to the waste that is produced from factories. The waste from various factories seems to have different characteristics. This defference encourages us to be able to find out different of methods of managing waste so that cost can be reduced, especially in water treatment. In order that industrial development and environmental preservation can run together in balance, many institutions involved should be consider, especially in the industrial chain, the environment, and human resource, these three elements can be examined in terms of their tolerance to waste.

scholarly journals Ways of ensuring optimum volumes of food production in Ukraine and their economic accessibility to the population

2019 ◽  
Vol 23 (4) ◽  
pp. 703-711
Author(s):  
S.I. Rudavka
Keyword(s):  
Food Production ◽  
Industrial Development ◽  
Agricultural Sector ◽  
Agricultural Land ◽  
Agricultural Products ◽  
Economic Conditions ◽  
Land Resources ◽  
Agrarian Sector ◽  
Land Owners

Annotation. The basis of food security for the country and its regions is to ensure optimal food production and economic affordability. The purpose of the article is to identify ways to increase the production of high quality food and to ensure economic accessibility to the population of Ukraine in the purchase of food. As the volume of production of the most important foodstuffs per person is low, it is essential to increase the volume of production of agricultural products and their processing, to ensure economic accessibility to the population in the purchase of foodstuffs, for which it is necessary to develop a long-term program of agro-industrial development in the country. complex, reform the agrarian sector of the economy, create a land service for the control of land resources and develop its structure: cr vine farms, farms, private farms and cooperatives, run a transparent market of agricultural land, where the owners, land owners must be citizens of Ukraine, to provide comprehensive state support to producers of the agricultural sector to ensure economic conditions of accessibility in public purchasing food.

Applications and Sustainability in Groundwater Abstraction in Malaysia

2015 ◽  
Vol 73 (5) ◽  
Author(s):  
Intan Sazrina Saimy ◽  
Fauziah Raji
Keyword(s):  
Water Management ◽  
Agricultural Sector ◽  
Groundwater Resources ◽  
State Level ◽  
Industrial Sector ◽  
Long Term Effects ◽  
Groundwater Abstraction ◽  
Groundwater Governance ◽  
Short And Long Term

Most major cities in Malaysia face problems of clean and safe water supply. The blame is on the population boom, industrialisation, pollution plus climate change. It becomes more complicated with uncontrolled usage, public’s ignorance and ineffective water management. These problems have led to higher dependencies towards alternative usage of groundwater to serve the needs of public, agricultural sector and the industries. Groundwater usage must be abstracted sustainably to avoid short and long term effects. This exploratory qualitative study analyses several aspects: (a) existing documents on Malaysian water management (b) documents on Malaysian groundwater governance; (c) applications and enforcements of groundwater governance in states. The analyses are essential in recognising and providing appropriate and effective groundwater governance towards higher consumption in the country especially in industrial sector. Early finding reveals the current groundwater governance lack good management and there are legal vacuums. This paper promotes appropriate groundwater governance and management of policies and strategies at both federal and state level, relevant agencies, stakeholders and local communities in ensuring sustainable groundwater resources usage in Malaysia.

scholarly journals Technological priorities for the development of Russia’s industrial sector in the context of deep digital penetration

2021 ◽  
pp. 74-80
Author(s):  
O. E. Pudovkina
Keyword(s):  
Industrial Development ◽  
Industrial Sector ◽  
Industrial Society ◽  
Industrial Complex ◽  
Main Research ◽  
Advanced Manufacturing Technologies ◽  
Production Technologies ◽  
Technology Market ◽  
Manufacturing Technologies

Industry 4.0 dictates certain requirements for the modernisation of processes and production facilities. This is especially true for industry, which has a relatively high share of the country’s gross domestic product The outline of the future strategic development of the industry sector in an environment of external change is therefore of particular relevance. The purpose of the study is to forecast technology priorities and possible stages of development of advanced manufacturing technologies in Russia. The main research method is foresight methodology, based on long-term integrated assessment models of global production and technology market development in scenario form. This method has allowed to identify the most functional information resources needed for this study. The article presents a methodology for systemic anticipation of long-term technological change to update the strategic vector of industrial development, which is consistent with the context and content of the country’s industrial policy. The study resulted in a comprehensive forecast of possible stages in the development of advanced production technologies and the anticipation of the priority of technological changes to modernise the industrial complex in the context of deep digital penetration, based on the concept of a new industrial society.

On Capital Allocation And The Real Cost Of Labour (Notes & Comments)

1970 ◽  
Vol 10 (4) ◽  
pp. 491-499
Author(s):  
F. E. Banks
Keyword(s):  
Agricultural Sector ◽  
Wage Differential ◽  
Industrial Sector ◽  
Capital Allocation ◽  
Marginal Product ◽  
Developing Economy ◽  
Real Cost ◽  
The Difference ◽  
Industrial Wage ◽  
Two Sectors

This note is an extension of several contributions to the problem of re¬source allocation in a developing economy. In separate papers, I.M.D. Little and F. Seton* have introduced a model in which labour in a developing economy cannot be shifted from the subsistence to the industrial sector at zero opportunity cost, even though this labour displays zero marginal product in its 'traditional' occupations; and in what follows this problem will be attacked via a diagramma¬tic analysis. A short appendix will treat a side issue of the topic. As Little presented the model, there was an initial amount of capital K to be divided between two sectors, the I (industrial) sector, and the C (subsistence, traditional, or agricultural) sector. In the C-sector, there is excess labour or dis¬guised unemployment, in the sense of Professor W. A. Lewis2, in that the marginal product of labour in this sector is taken as equal to zero. As it happens, however, this labour cannot be moved to the I-Sector without an increase in production in the C-sector. The reason for this is because as labour is transferred to the industrial sector, consumption per head increases in the C-sector, thus decreasing the surplus available for workers being transferred to the I-sector. The transfer can only be carried out if a surplus equal to the difference between the industrial wage in C-goods and the amount of C-goods 'released' by the C-sector is forth¬coming, and for this an increased production of C-goods (via the input of capital into the C-sector) must take place. A similar situation would exist if transferring workers required a wage differential; or if C-goods had to be exported to obtain certain types of capital goods for the labour being reallocated, and/or housing, training, etc.

Prospects for matching strategic directions of the intergraphic development of the Economic Union and the Economic belt of the Silk road

2020 ◽  
pp. 22-45
Author(s):  
V. Zubenko ◽  
A. Massalimova
Keyword(s):  
Industrial Development ◽  
Donor Country ◽  
Silk Road ◽  
Foreign Economic Policy ◽  
Industrial Cooperation ◽  
Economic Paradigm ◽  
Silk Road Economic Belt ◽  
Title One ◽  
The Silk Road

The accelerated economic development of China in recent decades has allowed it to accumulate the potential to multiply its influence in Eurasia and initiate a number of ambitious political and economic projects designed for the long term. The most important of these are the concepts of the Silk Road Economic Belt (SREB) and the 21st Century Marine Silk Road (UWB), put forward by Chinese President Xi Jinping in autumn 2013 and subsequently combined under the title "One Belt — one way" as the strategy of China’s foreign economic policy, at least until 2022. Another factor behind the emergence of the SREB concept is the change in China’s foreign economic paradigm and its transition from a country attracting foreign direct investment to a donor country. Therefore, industrial cooperation is an important part of the SREB. In the negotiations of the EAEU countries with China on the integration of the EAEU and the SREB, it is necessary to take into account the interests of the industrial development of the EAEU countries, as well as the possible economic, political, operational and environmental risks that the process of interfacing with the SREB entails. It is necessary that the industrial cooperation of the EAEU countries and China be based on the principles of equality and mutual benefit.

MIDC Role in Infrastructural Development in Navi Mumbai

2016 ◽  
Vol 4 (1) ◽  
Author(s):  
Prashant H. Bhagat
Keyword(s):  
Industrial Development ◽  
Industrial Sector ◽  
Vital Role ◽  
The State ◽  
Infrastructure Development ◽  
Industrial Areas ◽  
Industrial Estates ◽  
Development Corporation ◽  
Set Up ◽  
Industrial Development Corporation

The BID (Board of Industrial Development) framed the legislation and it was introduced before the state legislation and passed in the form of Maharashtra Industrial Act which gave birth to Maharashtra Industrial Development Corporation (MIDC), as a separate corporation on August 1, 1962. The BID was the first personnel strength of MIDC. A small ceremony at Wagle Estate Thane, under the Chairmanship of the Chief Minister Shri Y.B. Chavan, marked the birth of MIDC on August 1, 1962. The Board of Industrial Development during its existence between October 1, 1960 and August 1, 1962 has done enough spade work to identify the locations for setting up industrial areas in different parts of the state. Thus, right in the first year of establishment MIDC came up with 14 industrial areas, to initiate action for infrastructure and help entrepreneurs set up the industrial units in those areas. Maharashtra Industrial Development Corporation is the nodal industrial infrastructure development agency of the Maharashtra Government with the basic objective of setting up industrial areas with a provision of industrial infrastructure all over the state for planned and systematic industrial development. MIDC is an innovative, professionally managed, and user friendly organization that provides the world industrial infrastructure. MIDC has played a vital role in the development of industrial infrastructure in the state of Maharashtra. As the state steps into the next millennium, MIDC lives up to its motto Udyamat Sakal Samruddhi i.e., prosperity to all through industrialization. Indeed, in the endeavor of the state to retain its prime position in the industrial sector, MIDC has played a pivotal role in the last 35 years. MIDC has developed 268 industrial estates across the state which spread over 52653 hectares of land. The growth of the Corporation, achieved in the various fields, during the last three years, could be gauged from the fact that the area currently in possession of MIDC has doubled from 25,000 hectares in 1995.

scholarly journals Design of a Database of Case Studies and Technologies to Increase the Diffusion of Low-Temperature Waste Heat Recovery in the Industrial Sector

2021 ◽  
Vol 13 (9) ◽  
pp. 5223
Author(s):  
Miriam Benedetti ◽  
Daniele Dadi ◽  
Lorena Giordano ◽  
Vito Introna ◽  
Pasquale Eduardo Lapenna ◽  
...  
Keyword(s):  
Low Temperature ◽  
Case Studies ◽  
Heat Recovery ◽  
Waste Heat Recovery ◽  
Waste Heat ◽  
Industrial Sector ◽  
Implementation Rate ◽  
Depth Analysis ◽  
Technology Market

The recovery of waste heat is a fundamental means of achieving the ambitious medium- and long-term targets set by European and international directives. Despite the large availability of waste heat, especially at low temperatures (<250 °C), the implementation rate of heat recovery interventions is still low, mainly due to non-technical barriers. To overcome this limitation, this work aims to develop two distinct databases containing waste heat recovery case studies and technologies as a novel tool to enhance knowledge transfer in the industrial sector. Through an in-depth analysis of the scientific literature, the two databases’ structures were developed, defining fields and information to collect, and then a preliminary population was performed. Both databases were validated by interacting with companies which operate in the heat recovery technology market and which are possible users of the tools. Those proposed are the first example in the literature of databases completely focused on low-temperature waste heat recovery in the industrial sector and able to provide detailed information on heat exchange and the technologies used. The tools proposed are two key elements in supporting companies in all the phases of a heat recovery intervention: from identifying waste heat to choosing the best technology to be adopted.

Introduction of Flexible Manufacturing Systems as a Necessary Measure for the Russian Industrial Development

2019 ◽  
Vol 957 ◽  
pp. 195-202 ◽  
Author(s):  
Elizaveta Gromova
Keyword(s):  
Flexible Manufacturing ◽  
Flexible Manufacturing Systems ◽  
Industrial Development ◽  
Manufacturing Systems ◽  
Manufacturing System ◽  
Agile Manufacturing ◽  
Industrial Sector ◽  
Business Environment ◽  
Maximum Speed ◽  
Industrial Enterprises

With the onset of the Fourth Industrial Revolution, the business environment becomes inherent in changes that occur with maximum speed, as well as characterized by the systemic nature of the consequences. One of them is the transformation of operational management models in industrial enterprises. The modern manufacturing system should focus not only on speed of response and flexibility, but also on the cost and quality of products. Integration of effective models: agile manufacturing, quick response manufacturing and lean production, in order to extract the best from them is proposed. The purpose of this study is to analyze this flexible manufacturing system and to relate it to the current state of the Russian industrial development. Theoretical and practical aspects of this model are presented. The examples of the flexible models introduction in the Russian industrial sector is allocated. The conclusion about the necessity of the flexible manufacturing systems implementation for the Russian industrial development is drawn.

Rehabilitation of water treatment plants with operational constrains: a study on turbidity removal

2013 ◽  
Vol 3 (4) ◽  
pp. 549-556 ◽  
Author(s):  
Kaveh Sookhak Lari ◽  
Morteza Kargar
Keyword(s):  
Water Treatment ◽  
Treatment Plant ◽  
Water Treatment Plant ◽  
Term Effect ◽  
High Rate ◽  
Water Turbidity ◽  
Turbidity Removal ◽  
Water Treatment Plants ◽  
Long Term Effect

High-rate lamella settlers in clarifiers and triple media filters have been implemented in Isfahan water treatment plant (known as ‘Baba-Sheikh-Ali’) in Iran to upgrade existing clarification/filtration processes during the recent years. The applied technologies are mainly used to reduce finished water turbidity as the primary regional criterion on water quality. However, application of both technologies faced some operational limitations since they began to work. These problems are due to the existing layout of the process units and available materials. The current study focuses on performance of restricted application of the two technologies with respect to turbidity removal. Online measured turbidity data from a two-year field observation (since March 2010) are used. In particular, results show a more promising and long-term effect on turbidity removal due to tripling filter media rather than application of the lamella settlers in clarifiers. The reasons for these observations are discussed.

Case study on the implementation of deammonification for the process water treatment of Munich WWTPs

2012 ◽  
Vol 65 (10) ◽  
pp. 1895-1902 ◽  
Author(s):  
Rita Hilliges ◽  
Eberhard Steinle ◽  
Bernhard Böhm
Keyword(s):  
Water Treatment ◽  
Operating Costs ◽  
Process Water ◽  
Second Stage ◽  
Sludge Disposal ◽  
Sludge Digestion ◽  
High Investment ◽  
Flow Treatment

The two-staged WWTP ‘Gut Grosslappen’ has a capacity of 2 mio. PE. It comprises a pre-denitrification in the first stage using recirculation from the nitrifying second stage. A residual post-denitrification in a downstream sand filter is required in order to achieve the effluent standards. Presently the process water from sludge digestion is treated separately by nitrification/denitrification. Due to necessary reconstruction of the biological stages, the process water treatment was included in the future overall process concept of the WWTP. A case study was conducted comparing the processes nitritation/denitrititation and deammonification with nitrification/denitrification including their effect on the operational costs of the planned main flow treatment. Besides the different operating costs the investment costs required for the process water treatment played a significant role. Six cases for the process water treatment were compared. As a result, in Munich deammonification can only be recommended for long-term future developments, due to the high investment costs, compared with the nitritation/denitritation alternative realizable in existing tanks. The savings concerning aeration, sludge disposal and chemicals were not sufficient to compensate for the additional investment costs. Due to the specific circumstances in Munich, for the time being the use of existing tanks for nitritation/denitritation proved to be most economical.

Sign in / Sign up

Export Citation Format

Share Document